* Added a miscellaneous work-arounds section at the end.
* Included code in said miscellaneous section for accessing the groups
specified in a gpg.conf file.
* It's a bit ugly since it does require subprocess (but not call,
Popen or shell access and only accesses one command).
* updated multi-encryption final example to be complete.
* second example shows most likely method of reading plaintext.
* updated example filenames to stick with running gag
(i.e. secret_plans.txt).
* error corrections.
* multiple typesetting fixes only required due to certain archaic
eccentricities of LaTeX.
* a couple of minor python PEP8 compliance corrections.
* Added a more complicated encryption example with a few variations on
the encryption method to account for untrusted recipient keys,
signing or not signing, including or excluding default keys and so
on.
* Switched from links to some external docs to using footnotes where
necessary.
* Ideally the howto should be as stand alone as possible.
* Also it makes it difficult to convert to another format for
proof-reading if there are links that the conversion can't find.
* Wrote the text description explaining each step in the most basic
encryption operation.
* Will need to include additional examples for encrypting to multiple
recipients using Context().encrypt instead of Context().op_encrypt.
* Added all four signing code examples that are most likely to be
used: armoured, clearsigned, detached armoured and detached binary.
* May remove some examples and just discuss the differences, but it
depends on the way the text is filled out.
* Added sample code for encrypting some text to a single key.
* Basically I'm just lifting existing production code and changing the
key IDs from mine to "0x12345678DEADBEEF" for these first few
examples.
* I'll fill in the text description after.
* Note: due to my regional location, I might split some tasks into
more commits in order to be sure no work gets lost in case of
emergency (or to put it another way: I know Telstra too well to
trust them).
* Added a section for those pythonistas who are too used to web
programming. Stressed that it's not simply not RESTful, it's not
even REST-like.
* Letting me move on to drawing a very loose parallel between a
session and a context. The differences should become obvious in the
subsequent sections.
* Some instructions to include are fairly obvious; as with encryption,
decryption and signature verification.
* Some are a little less obvious.
* This includes the requests received to specifically include subkey
management (adding and revoking subkeys on a primary key that's
being retained.
* Added the UID equivalents to the list, as well as key selection
matters (and may or may not include something for handling group
lines since that involves wrapping a CLI binary).
* Key control documentation and examples requested by Mike Ingle of
confidantmail.org.
* removed one bit of whitespace.
* Marked up references to gpgme.h.
* Fixed one spelling error.
* Removed py2.6 from python search order since even if it is
supported, it shouldn't be encouraged.
* Started work on the GPGME Python bindings HOWTO.
* 1,050 words to begin with at approx. 7.5KB.
* Got as far as installation.
* Includes instruction not to use PyPI for this.
* Set LaTeX headers to enable ligatures and a 12pt font by default.
* Paper size left for regional defaults.
* Using XeLaTeX for easier font control.
* Using default LaTeX font of Latin Main, but that's easy enough to change.
* The developers of Phabricator, the web front-end on dev.gnupg.org
have not implemented renderers for Markdown, Org-Mode or any other
common markdown like language.
* They also refuse to do so.
* Instead they re-invented the wheel and implemented their own version
of Markdown-like thing which is incompatible with everything else.
It is called Remarkup.
* The developers of Phabricator and Remarkup have refused to provide
conversion tools to move files to/from any format to/from Remarkup.
* They expect everyone to learn their new favourite pet project.
* Remarkup may or may not display Org Mode files, but if so then it is
likely to only want to do so as plain text.
* There is an unaffiliated and unofficial project to convert Github
Markdown to Remarkup via Pandoc. This might be adapted for our use,
but requires testing.
* Until then exporting from Org Mode to UTF-8 text is likely the least
worst plan.
* Which means renaming this file to README.org first.
* Removed Markdown style heading underlining.
* Removed in-line file type declaration (which is not correctly parsed
by the web interface on dev.gnupg.org).
* Fixed or updated the most fundamental errors.
* Also included some details on which modules are available on PyPI,
as well as what happened to the PyME commit log.
* Updated TODO.
* The entirety of the old TODO has been replaced with either more
relevant tasks or goals for the examples and a more measured
approach to the docs and why, in this project, Org Mode trumps reST,
even though it's Python through and through.
* lang/qt/src/qgpgmequickjob.cpp (addSubkeyWorker)
(createWorker): Use toMSecsSinceEpoch instead toSecsSinceEpoch.
--
toSecsSinceEpoch was only introduced in Qt 5.8.
* src/gpgsignkeyeditinteractor.cpp (SignKeyState): Add second
CONFIRM state.
(makeTable): Properly handle local_promote_okay.
(action): Handle CONFIRM2.
--
This fixes changing a local signature to a "public" signature.
GnuPG-Bug-Id: T1649
* lang/python/gpgme.i: copied signature from gpgme.h and defaulted the
value to SEEK_SET.
* lang/python/tests/t-data.py: Added a test for no second argument
--
Having to import the os package when wanting to read a Data object is a
slight annoyance. With SWIG, we can define default parameters. This
change defaults the whence argument to SEEK_SET which is how StringIO
and BytesIO behave.
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* lang/qt/src/qgpgmequickjob.cpp,
lang/qt/src/qgpgmequickjob.h,
lang/qt/src/quickjob.h: New.
* lang/qt/src/Makefile.am,
lang/qt/src/protocol.h,
lang/qt/src/protocol_p.h,
lang/qt/src/job.cpp: Update accordingly.
--
Keeping it in line with the Job for everything pattern.
Although it's reduced to one job for four commands as
the commands all behave the same.
* lang/python/tests/Makefile.am: Distinguish target and path.
* tests/gpg/Makefile.am: Ditto.
* tests/gpgsm/Makefile.am: Ditto.
--
GNU Make is powerful enough to match path to target (and vice versa),
but BSD make is not.
GnuPG-bug-id: 3056
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* lang/qt/src/dataprovider.cpp (blocking_read): Keep
reading if process is not atEnd.
--
This fixes a regression in Kleopatra that uses this dataprovider
to chain the gpgtar process to the encryption / signing.
* NEWS: Update.
* lang/python/src/core.py (Context.__read__): New helper function.
(Context.encrypt): Attach partial results to exceptions.
(Context.decrypt): Likewise.
(Context.sign): Likewise.
(Context.verify): Likewise.
* lang/python/src/errors.py (GpgError): Move the core of GPGMEError to
this class, add a nicer interface for it. This makes the errors
thrown by this library more uniform, and allows us to track the
underlying error in synthesized high-level errors.
(GPGMEError): Simplify.
(...): Make sure to call the parent classes' constructor in all other
classes.
--
Attach partial results to errors. Some operations return results even
though they signal an error. Of course this information must be taken
with a grain of salt. But often, this information is useful for
diagnostic uses or to give the user feedback. Since the normal
control flow is disrupted by the exception, the callee can no longer
return results, hence we attach them to the exception objects.
GnuPG-bug-id: 3271
Signed-off-by: Justus Winter <justus@g10code.com>
* NEWS: Update.
* lang/cpp/src/decryptionresult.cpp (DecryptionResult::isDeVs): New
function.
* lang/cpp/src/decryptionresult.h (DecryptionResult::isDeVs): New
prototype.
* lang/cpp/src/verificationresult.cpp (Signature::isDeVs): New
function.
* lang/cpp/src/verificationresult.h (Signature::isDeVs): New
prototype.
* lang/python/src/results.py (DecryptResult): Turn field 'is_de_vs'
into a boolean.
(Signature): Likewise.
* src/decrypt.c (_gpgme_decrypt_status_handler): Handle the new
compliance status line.
* src/verify.c (_gpgme_verify_status_handler): Likewise.
* src/gpgme.h.in (gpgme_status_code_t): Add new status codes for the
new status lines.
* src/keylist.c (parse_pub_field18): Move function to 'util.h'.
(keylist_colon_handler): Adapt callsites.
* src/status-table.c (status_table): Add new status lines.
* src/util.h (PARSE_COMPLIANCE_FLAGS): New macro. This used to be
'parse_pub_field18', but turned into a macro to make it polymorphic.
--
When decrypting data and verifying signatures, report whether the
operations are in compliance with the criteria for data classified as
VS-NfD. This information can the be presented to the user.
GnuPG-bug-id: 3059
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/setup.py.in: Prepend the Python build dir to the list of
include directories so that it takes precedence over any other include
directory.
--
Fixes the build in case an older 'gpgme.h' is installed and is picked
up by the compiler when compiling the Python module.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/tests/Makefile.am (pubring-stamp): Do not depend on the
configuration files, this can trigger superfluous rebuilds.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/tests/Makefile.am: Kill all previously running daemons
before creating the private key store.
* lang/qt/tests/Makefile.am: Likewise.
* tests/gpg/Makefile.am: Likewise.
* tests/gpgsm/Makefile.am: Likewise.
--
Now that the daemons sockets are no longer created in the GNUPGHOME,
we cannot rely on cleaning the build directory to make sure they are
shut down. Therefore, we explicitly kill any running daemons when
creating the test environment.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/tests/Makefile.am: Create test environment as part of
'make all'.
* tests/gpg/Makefile.am: Make sure the private keystore is created
first.
* tests/gpgsm/Makefile.am: Create test environment as part of
'make all'. Make sure the private keystore is created
first.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/qt/src/qgpgmenewcryptoconfig.cpp: Include functional.
--
This is intended to fix compilation against the c++ stdlib from
Gentoo / GCC 7.
Patch provided by Martin Väth.
GnuPG-Bug-Id: T3151
* lang/qt/src/decryptjob.h,
lang/qt/src/decryptverifyjob.h,
lang/qt/src/signencryptjob.h,
lang/qt/src/verifydetachedjob.h,
lang/qt/src/verifyopaquejob.h: Undeprecate ByteArray based API.
--
While an IODevice may be more performant the ByteArray API is
a very easy way to get started with QGpgME as it allows you
basically to encrypt / decrypt any QString.
This also fixes a ton of deprecation warnings in KDE where this
API is used all over the place.
* lang/qt/tests/t-encrypt.cpp, lang/qt/tests/t-tofuinfo.cpp:
Only use exported API.
--
With the Job::Context hack we no longer need to use internal API.
* lang/python/tests/support.py (have_tofu_support): New function.
* lang/python/tests/t-quick-key-manipulation.py: Skip TOFU test if not
supported by GnuPG.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/tests/run-tests.py: Add --python-libdir optional
parameter.
--
This will make the python tests usable for downstream that build python
module outside of autotools build system.
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
* lang/python/setup.py.in: Read gpg-error.h using the pre-processor.
--
The libgpg-error may be installed in multilib configuration in which
there is a wrapper header at /usr/include that includes the actual
header at /usr/include/*. This causes invalid errors.i generation.
Let the pre-processor extract the header content instead reading it
explicitly.
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
* configure.ac: Remove PYTHON_VERSIONS subst.
* lang/python/Makefile.am: Use basename of python as builddir prefix.
* lang/python/tests/run-tests.py: Likewise.
--
Two variables needs be at sync PYTHONS and PYTHON_VERSIONS, these may go
out of sync in some cases, for example in Gentoo where default python is
3.4 we get:
PYTHON='/usr/bin/python2'
PYTHONS='/usr/bin/python /usr/bin/python2'
PYTHON_VERSIONS='2.7 3.4'
We can use the basename of the python interpreter to achieve similar
effect without having to sync indexes between these two variables.
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
* tests/gpg/Makefile.am: Use BUILT_SOURCES instead of check-local
and initial.test.
* lang/qt/tests/Makefile.am: Ditto.
--
This fixes "make dist" failure when source tree is clean:
git clean -dxf
autoreconf -ivf
./configure
make dist
BUILT_SOURCES should be used when file as generated without explicit
dependency. The check-local is all-am dependency, this means that it
will be resolved also in "make dist".
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
* lang/python/setup.py.in: Do not parse arguments.
--
The distutils settings can come from either command-line or
configuration file. Parsing parameters is not working in all cases.
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
* lang/python/gpg/version.py.in: Rename to lang/python/version.py.in.
configure.ac: Generate version.py.in in lang/python.
* lang/python/MANIFEST.in: Include version.py explicitly.
* lang/python/gpg: Rename to 'src'.
* lang/python/Makefile.am: Do not copy source files, do not use absolute
directories, support lib64 in uninstall, clean also dist directory, use
symlink for gpg src.
* lang/python/setup.py.in: Use builddir, copy sources into builddir,
copy version.py into module.
--
Simplify build to symlink the gpg sources into builddir instead of
copying. This requires handling of version.py as generated file.
In addition apply some cleanups: Drop the absolution pathes, clean the
dist directory as well, support lib64 for sitelib at uninstall.
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
* lang/python/gpgme-h-clean.py: Delete file.
* lang/python/MANIFEST.in: Adapt accordingly.
* lang/python/Makefile.am (EXTRA_DIST): Likewise.
(COPY_FILES_GPG): Bring variable back.
(copystamp): Copy files.
(clean-local): Delete copied files.
(install-exec-local): Do not create and install list of installed
files.
(uninstall-local): Instead, create some explicit rules to uninstall
the extension.
* lang/python/setup.py.in: Parse arguments. Locate files either in
the source directory, or in the build base directory. Inline the code
from 'gpgme-h-clean.py'. Copy 'helpers.c', add source directory as
include directory.
Fixes-commit: 801d7d8c5d
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/setup.py.in: Generate files within BuildExtFirstHack
adjust build flags at this point instead of global.
* lang/python/Makefile.am: Remove logic of separate source directory per
python version in favor of build directory.
* lang/python/tests/run-tests.py: Adjust build directory location.
--
Generate files into build directory, leaving the source directory clean.
Use the same source directory for multiple python version build. Result
of 'prepare' target is a standard distutil layout that can be used
easily by downstream to build all python targets in-place.
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
* lang/qt/src/dn.cpp (parse_dn_part): Add fmt argument instead of
using name directly.
GnuPG-Bug-Id: 3023
Signed-off-by: Igor Gnatenko <ignatenkobrain@fedoraproject.org>
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* lang/qt/src/t-tofuinfo.cpp (TestTofuInfo::testSupported): Treat
it as unsupported if secret keylisting already fails.
--
The likely cause of this is that the agent can't be started
because the trust model is unsupported. Other tests check
that keylisting actually works.
* lang/python/Makefile.am: Fix 'prepare' target.
* lang/python/setup.py.in: Use 'abs_top_builddir' instead of guessing
the path.
--
'prepare' will prepare target at PREPAREDIR. The automake integration
will also make use of prepare target. Downstream distributors may
also make use of prepare target.
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
* lang/qt/tests/t-encrypt.cpp (EncryptTest::testEncryptDecryptNowrap):
Disable test.
--
This test produces failures under CI/ASAN conditions as the
verify after the unwrap returns an error. As we currently
don't have time to look into this more it's disabled for now.
Similar to the testMixedEncryptDecrypt.
* lang/python/tests/support.py (assert_gpg_version): Fix error
message. Skip all tests when we use GnuPG older than 2.1.12.
GnuPG-bug-id: 3008
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/cpp/src/context.cpp: Respect directly provided flags
in the new decrypt functions.
--
Overlooked in the initial commit. Also fixed the according
unused variable warnings.
* lang/cpp/src/context.cpp: New decrypt and decryptVerify functions
that take flags as arguments. Use new variants in old functions.
(Context::setDecryptionFlags): New helper.
(Context::Private::Private): Initialize new member.
* lang/cpp/src/context_p.h (Context::Private::decryptFlags): New.
* lang/cpp/src/context.h (Context::DecryptFlags): New enum.
(Context::EncryptionFlags): Extend for EncryptWrap.
--
The setDecryptionFlags provides a generic way to set decryption
flags for the whole context. This allows existing code to just
keep using the old functions and modify the decryption behavior
in a central place.
* lang/cpp/data.h, lang/cpp/data.cpp (GpgME::Data::toKeys): New.
--
Doing this in data instead of Context is a bit more idiomatic. But
this could also be added to Context.
* NEWS: Update.
* lang/python/gpg/core.py (Context.keylist): New keyword argument
'source'. If given, list keys from 'source'.
* lang/python/gpgme.i: Wrap the argument to
'gpgme_op_keylist_from_data_start'.
* lang/python/tests/Makefile.am (py_tests): Add new test.
* lang/python/tests/support.py (EphemeralContext): Do not throw an
error if no agent has been started in the context.
* lang/python/tests/t-keylist-from-data.py: New file.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/tests/Makefile.am (gpg-agent.conf): Do not hard-code the
option. This breaks gpg-agent from GnuPG 2.0.
* tests/start-stop-agent: Rather, check if the option is supported and
add it to the configuration if it is.
GnuPG-bug-id: 3008
Fixes-commit: bbf19124bb
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/tests/support.py (assert_gpg_version): New function.
* lang/python/tests/t-callbacks.py: Use the new function to skip the
test if GnuPG is too old.
* lang/python/tests/t-edit.py: Likewise.
* lang/python/tests/t-encrypt-sym.py: Likewise.
* lang/python/tests/t-quick-key-creation.py: Likewise.
* lang/python/tests/t-quick-key-manipulation.py: Likewise.
* lang/python/tests/t-quick-key-signing.py: Likewise.
GnuPG-bug-id: 3008
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/tests/run-tests.py: Make the error message shown when we
cannot locate the python module in the build tree more helpful.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/tests/support.py (TemporaryDirectory): Always use our
own version even if 'tempfile.TemporaryDirectory' is provided, because
we need to use 'shutil.rmtree(..., ignore_errors=True)' to avoid it
tripping over gpg-agent deleting its own sockets.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/qt/src/dn.cpp (parse_dn_part): Use gpgrt_asprintf instead
of qstrdup.
--
This fixes a new / free mismatch because qstrdup uses new and
the allocated parts are freed with free. Similar to: a09ed3f2
* lang/python/tests/initial.py: Print path of the Python module used
during tests. Useful to detect if by any mistake the wrong module is
picked up.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/tests/t-quick-key-manipulation.py: Modify the
configuration file in the ephemeral home directory, not the one used
by all the tests.
Fixes-commit: 15fbac9e72
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/tests/support.py (EphemeralContext): New function.
* lang/python/tests/t-quick-key-creation.py: Use the new function to
manage ephemeral contexts.
* lang/python/tests/t-quick-key-manipulation.py: Likewise.
* lang/python/tests/t-quick-subkey-creation.py: Likewise.
--
Previously, there was a problem with cleaning up ephemeral home
directories. shutil.rmtree deleted the agents main socket, gpg-agent
detected that, and deleted the other sockets as well, racing
shutil.rmtree which did not cope will with that.
Fix this by asking the agent nicely to shut down.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/gpg/core.py (Context.assuan_transact): Fix testing
whether the command is a string on Python2.
* lang/python/tests/t-protocol-assuan.py: Improve the test to detect
this problem.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/Makefile.am (copystamp): Also copy the setup script, and
link the header files.
(all-local): Use local setup script.
(sdist): Fix Python source distribution creation.
(CLEANFILES): Remove now obsolete files.
(install-exec-local): Use local setup script.
* lang/python/setup.py.in: Adjust relative paths to in-tree files.
Fixes-commit: fe65a26ab5
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/gpgme.i: Added a genericrepr macro and use it for
gpgme_key, gpgme_subkey, and gpgme_key_sig.
--
To look nicer in Python's REPL.
We define a generic __repr__ as a SWIG macro and use that to extend some
defined SWIG objects.
The alternative would have been to write a custom __repr__ function for
each class but that would need to be changed everytime the object's
structure changes. The bindings should be easy to maintain, I guess.
This comes at the expense that the reprs are now relatively long and
contain, for example, both keyid and fingerprint.
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* lang/python/setup.py.in: Call SWIG without the builtin flag.
--
The SWIG documentation
<http://www.swig.org/Doc2.0/Python.html#Python_nn28> leaves the
impression that -builtin is solely for increasing performance:
New in SWIG version 2.0.4: The use of Python proxy classes has
performance implications that may be unacceptable for a high-
performance library. The new -builtin option instructs SWIG to
forego the use of proxy classes, and instead create wrapped types as
new built-in Python types. When this option is used, the following
section ("Proxy classes") does not apply. Details on the use of the
-builtin option are in the Built-in Types section.
While not wasting CPU cycles is good, it also prevents Python code being
written in the wrapper itself. That, however, may be useful to make it
easier to extend the wrapper.
Partially reverts: 856bcfe293
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* lang/python/gpgme.i (pygpgme_wrap_gpgme_data_t): Provide a "self"
variable for SWIG_NewPointerObj and call SWIG_NewPointerObj rather than
SWIG_Python_NewPointerObj.
--
SWIG_Python_NewPointerObj seems to be an implementation detail, because
SWIG's documentation does not mention that function at all. In fact,
SWIG_NewPointerObj is a call to SWIG_Python_NewPointerObj with the first
parameter being either NULL or the "self" variable, depending on whether
SWIG is called with the -builtin flag. So far, the first parameter was
hard-coded to NULL. This change also hard-codes it to NULL but makes
it more explicit. The benefit is that the documented function is being
used and that compilation works regardless of the -builtin flag.
Partially reverts: 856bcfe293
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* lang/python/setup.py.in: Only call with -py3 when we run under python3
or higher.
--
If we ever remove the -builtin flag and leave the the -py3 flag, SWIG
will generate Python code which will be incompatible with Python 2,
because the py3 flag generates python3 code which is incompatible with
python2.
So we conditionally generate SWIG bindings with -py3.
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* lang/python/Makefile.am (copystamp): Create one copy per Python
version.
(all-local): Adapt.
(clean-local): Likewise.
(install-exec-local): Likewise.
* lang/python/tests/run-tests.py: Likewise.
--
Currently, we use one copy of the Python module's source to build for
all Python versions. This is problematic, because SWIG writes a
wrapper file into the source tree. Currently, this file works with
both Python 2 and 3, but this is purely by chance.
Improve the situation by creating one copy per Python version so that
SWIG can write version-specific code into each copy.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/qt/src/qgpgmenewcryptoconfig.cpp,
lang/qt/src/threadedjobmixin.h: Include functional.
--
With GCC 7.0, functional is not included transitively and we get:
In file included from qgpgmedeletejob.h:39:0,
from qgpgmedeletejob.cpp:38:
threadedjobmixin.h:98:33: error: 'function' in namespace 'std'
does not name a template type
void setFunction(const std::function<T_result()> &function)
^~~~~~~~
std::{function,bind,placeholders,mem_fn} are defined in functional.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1417383
Signed-off-by: Igor Gnatenko <ignatenkobrain@fedoraproject.org>
GnuPG-Bug-Id: 2955
Commit Message amended by Andre Heinecke
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* lang/qt/tests/t-support.h (QSIGNALSPY_TIMEOUT): New macro.
* lang/qt/tests/t-encrypt.cpp: Use the new macro as timeout when
waiting for signals.
* lang/qt/tests/t-keylist.cpp: Likewise.
* lang/qt/tests/t-keylocate.cpp: Likewise.
* lang/qt/tests/t-ownertrust.cpp: Likewise.
* lang/qt/tests/t-wkspublish.cpp: Likewise.
--
Increase the timeout when waiting for signals from 5 seconds to 60.
This addresses intermittent test failures on slow machines.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/gpgme.i: Added gpgme_op_keylist_start with defaults
* lang/python/tests/t-keylist.py: Added tests for default parameters
--
To increase the ease of use, op_keylist_start
parameters default to sensible values.
The empty string matches all keys.
We assume that the user wants to retrieve public keys most of the time,
so we default to public keys rather than secret keys.
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* lang/qt/src/Makefile.am (qgpgme_sources): Add cryptoconfig.cpp
* lang/qt/src/cryptoconfig.cpp: New.
* lang/qt/src/cryptoconfig.h (CryptoConfigEntry::stringValueList):
New.
* lang/qt/src/qgpgmenewcryptoconfig.cpp
(QGpgMENewCryptoConfigEntry::stringValueList): New.
* lang/qt/src/qgpgmenewcryptoconfig.h: Update accordingly.
--
This is a pardigm change in cryptoconfig.h to avoid ABI breaks
with each new config value we support it now has an implementation
that is directly related to qgpgmenewcryptoconfig, which is now
the only one.
* lang/qt/tests/t-support.h (TestPassphraseProvider::getPassphrase):
Use gpgrt_asprintf instead of strdup.
--
To avoid problems on MacOS we want to avoid strdup so that
qgpgme can be built without extensions. But qstrdup allocates
with new and not with malloc, so use gpgrt_asprintf instead.
* configure.ac: Set HAVE_MACOS_SYSTEM conditional.
* lang/qt/src/Makefile.am,
lang/cpp/src/Makefile.am,
lang/qt/src/QGpgmeConfig.cmake.in.in,
lang/cpp/src/GpgmeConfig.cmake.in.in: Use libsuffix again to
distinguish between macos .dylib
--
GnuPG-Bug-Id: 2884
* lang/python/tests/run-tests.py: Add and honor a switch '--quiet'.
This way we can use this script to run Python tests one by one without
the noise, and the script will setup the necessary environment for us.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/qt/src/cryptoconfig.h (CryptoConfig::sync): Document
that runtime option is always set.
* lang/qt/Src/qgpgmenewcryptoconfig.cpp
(QGpgMENewCryptoConfigComponent::sync): Remove outdated comment
and warn on error.
* lang/cpp/src/key.cpp (Key::update): Check for
a secret key first before listing public keys.
--
This is a performance delay but the update should
only be called in a non gui thread anyway. The information
if we have the secret key for this key is important to provide
after update.
* lang/cpp/src/key.cpp (UserID::addrSpec): Use uid->address instead
of normalizing again.
(&operator<<(std::ostream &, const UserID &): Print it.
--
This saves a normalization and fixes the case where a user id
is just a mail address without name, in that case gpgme sets
"address" but not email. Because the email is then the name.
* lang/cpp/src/verificationresult.cpp
(Signature::key(bool,bool)): Don't update the returned copy
but the actual key of the signature.
--
The whole point of the update is to change the partial key
from the signature (e.g. only fingerprint and one uid as we
would have from tofu) to a fully keylisted one.
* lang/python/helpers.c (_gpg_obj2gpgme_data_t): Extended error
message.
* lang/python/tests/t-encrypt.py: Test for "encode" in error message.
--
The motivation is to help the user when encrypting fails. I claim that
it is not obvious to not being able to encrypt a string directly. To
nudge the user into encoding it to bytes, the error message is a bit
extended.
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* lang/python/gpgme.i (wrapresult): New Macro.
--
This reduces the amount of copy and pasted code at the expense of a
slightly more complicated logic with a macro.
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* lang/python/tests/support.py (print_data): Add check for buffer.
--
When running with something like make -C lang/python check verbose=2 the
test would fail under python2, because the file objects do not have a
buffer property.
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* lang/python/gpg/core.py (Context.__repr__): New function.
--
This makes Context objects look nicer in a REPL.
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* lang/python/gpg/results.py (Result.__str__): Renamed to '__repr__'
...
* lang/python/gpg/results.py (Result.__repr__): ... and added fields.
--
So that it looks a bit nicer in the Python REPL.
It looked like this before:
In [2]: gpg.core.get_engine_info()[0]
Out[2]:
<gpg.results.EngineInfo at 0x7fb23509a240>
Now the output is
In [2]: gpg.core.get_engine_info()[0]
Out[2]:
EngineInfo(file_name='/usr/bin/gpg2', home_dir=None,
protocol=0, req_version='1.4.0', version='2.1.11')
This also applies to other results, e.g. the ImportResult.
Note that the format now changed from "<Class >" to "Class()". The
Python documentation on repr states: "For many object types, including
most builtins, eval(repr(obj)) == obj."
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* lang/cpp/src/GpgmeppConfig.cmake.in.in: Remove a forgotten
instance of @libsuffix@.
--
b2c07bd47b removed @libsuffix@ from
cmake config files, but missed one instance.
Signed-off-by: Heiko Becker <heirecka@exherbo.org>
* lang/cpp/src/GpgmeppConfig-w32.cmake.in.in
lang/qt/src/QGpgmeConfig-w32.cmake.in.in: New.
* lang/cpp/src/GpgmeppConfig.cmake.in.in,
lang/qt/src/QGpgmeConfig.cmake.in.in: Remove libsuffix handling.
* lang/cpp/src/Makefile.am,
lang/qt/src/Makefile.am: Create / install w32 config files.
* configure.ac: Configure them.
--
To work with DLL's cmake needs to know about the implib and
the final DLL. So the config files look different enough
that it's better to use alternative files.
* lang/qt/src/job.cpp,
lang/qt/src/job.h (Job::context): New.
* lang/qt/src/threadedjobmixin.cpp
(ThreadedJobMixin::~ThreadedJobMixin): New. Unregister context.
(ThreadedJobMixin::lateInitialization): Register context.
* NEWS: Update for cpp and qt.
--
The global map hack is necessary because the job class does
not know about the context which is held in threadedjobmixin.
Adding a virtual function in Job would be an ABI break which
I'd like to avoid at this point. Although QGpgME's API will
need a big ABI break to make it ABI maintainable. The virtual
jobs -> implementation classes are nearly unmaintainable ABI wise.
The context is exposed to provide more flexibility to users, e.g.
to add a passphrase callback or to set the sender in a context.
* lang/qt/src/qgpgme_export.h,
lang/qt/src/qgpgme_version.h: Change license to GPLv2+
--
These files were based on copies from the cpp version/export
headers. This change is meant to clarify the licensing by
bringing it in line with the overall licesense of the
qgpgme library.
* lang/qt/src/defaultkeygenerationjob.cpp
(DefaultKeyGenerationJob::start): Explicitly connect pointer
in the QPointer.
--
Commit message written by Andre Heinecke <aheinecke@intevation.de>
* configure.ac (VERSION_MAJOR, VERSION_MINOR, VERSION_MICRO): New
subst variables for the version header.
* lang/cpp/src/GpgmeppConfigVersion.cmake.in,
lang/cpp/src/gpgmepp_version.h.in,
lang/qt/src/QGpgmeConfigVersion.cmake.in,
lang/qt/src/qgpgme_version.h.in: Use new variables.
--
Using the LT_* variables was just wrong. Reporting the
package version also makes more sense then the library version.
Having different versions might make ABI breaks more visible
by increasing the major version number, but to have different
versions in the same package is too confusing imo and gpgme
uses a versioning that is unrelated to the library version number.
* lang/qt/src/Makefile.am: Install cmake config file in qgpgme subdir.
--
Putting it together with Gpgmepp was done for historic reasons
but the proper way is for each library to have its own subdir.
* lang/qt/src/dn.cpp (DN, DN::Attribute): New public API.
* lang/qt/src/dn.h: New.
* lang/qt/src/Makefile.am: Update accordingly.
--
This is a general useful API to work with X509 distinguished
names and is useful when doing CMS with GpgME.
Adding this class from libkleo allows kmails messagelib to
avoid any KDE UI Frameworks and so can be used more versatile
in the future.
This class can be combined with libkleos DNAttributeMapper
to have the same bevavior as before in libkleo when using
DN::prettyDN calls can be converted from:
Kleo::DN(uid).prettyDN();
to:
QGpgME::DN dn(uid);
uid.setAttributeOrder(
Kleo::DNAttributeMapper::instance()->attributeOrder());
dn.prettyDN();
* lang/cpp/src/Makefile.am,
lang/qt/src/Makefile.am: Install version headers in include
subdirs.
--
This change was requested on the gnupg-devel mailing list to
avoid placing these headers into the top level include directories.
There is currently no known user of these headers so changing it
now should not break things downstream.
This follows weeks of discussion on the gnupg-devel mailing list.
Hopefully it will make it easier for people using Python to use GnuPG
in the future.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* lang/python/pyme/core.py (Context.get_key): Raise errors.KeyNotFound
if the key is not found. This error is both a KeyError for idiomatic
error handling as well as a GPGMEError so we don't break existing
code.
* lang/python/pyme/errors.py (KeyNotFound): New class.
* lang/python/tests/support.py (no_such_key): New variable.
* lang/python/tests/t-keylist.py: Test the new behavior.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/qt/src/multideletejob.h: Fix include, cryptobackend.h is now
called protocol.h
* lang/qt/src/multideletejob.cpp: New file.
* lang/qt/src/Makefile.am: Add multideletejob.cpp.
* lang/cpp/src/Makefile.am: Install abstractimportjob.h since it's
included from importjob.h
--
Fixes build when someone inclues importjob.h in their code.
* lang/cpp/src/key.cpp (UserID::addrSpecFromString): New static
function to expose addrspec from uid.
(UserID::addrSpec): New. Get addrSpec from Userid.
* NEWS: Update accordingly.
* lang/cpp/src/verificationresult.cpp (Signature::key(bool, bool)):
New. Can be used to search / update the key associcated with this
signature.
--
By using update a caller can ensure that an incomplete key
obtainable through the new key() function is fully loaded.
With search the key can be looked up in the internal keyring.
As the results are cached this can be done in the crypto thread
and the result then better used in the UI thread.
* lang/cpp/src/verificationresult.cpp (Private): Add null key
to list when there is no key associated with the signature.
--
This fixes an out of bounds read when a verification did
not have a key.
* lang/cpp/src/key.cpp: Include <strings.h> for 'strcasecmp'.
* tests/gpg/t-cancel.c: Include <sys/select.h> for 'fd_set' and
friends.
Signed-off-by: Justus Winter <justus@g10code.com>
* src/qgpgmewkspublishjob.cpp,
src/qgpgmewkspublishjob.h,
src/wkspublishjob.h,
tests/t-wkspublish.cpp: Fix spelling of received.
* src/configure.ac (LIBQGPGME_LT_CURRENT): Bump
accordingly.
--
While this is an API break I've decided to fix this now
instead of deprecating / keeping it around forever in the API.
The only known users of QGpgME are KDE Applications and
there it is not yet used.
* lang/qt/tests/t-encrypt.cpp: Disable tests that require
a password for 2.0.
--
The passphrase_cb apparently does not work with 2.0 so we would
need a fake pinentry to get this to work. We just disable the
test instead as this is a rarely used feature and works with
1.4 and 2.1.
* lang/qt/tests/Makefile.am (TESTS): Remove t-wkspublish.
--
Even the only enabled test did a connection to localhost this
might fail if it is stalled and is an outside factor. It also might
be disturbing other services locally.
* lang/python/Makefile.am: Link to the files.
* lang/python/gpgme.i: Update path.
* lang/python/setup.py.in: Do not add the top builddir to the include
path.
--
To make it easy to build the subpackage using standard tools without
altering environment or CFLAGS, symlink the required artifacts from
source tree into subpackage directory when preparing sources.
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
* lang/python/Makefile.am: Add 'prepare' target.
--
This enables preparing the package using autoconf then build using
distutils as separate stage.
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
* lang/cpp/src/Makefile.am,
lang/qt/src/Makefile.am: Replace resolved_includedir.
* lang/cpp/src/GpgmeppConfig.cmake.in.in,
lang/qt/src/QGpgmeConfig.cmake.in.in: Use resolved_includedir
instead of relying on a common installation prefix.
--
This fixes usage of the config files in case gpgme
is configured with a custom --includedir.
We have to do the replacement manually like for libdir
because configure would include variables in the replacement.
* lang/python/Makefile.am: Pass 'top_builddir' to 'setup.py'.
* lang/python/gpgme.i: Include 'config.h'.
* lang/python/helpers.c: Likewise.
* lang/python/helpers.h: Likewise.
* lang/python/setup.py.in: Make sure that 'config.h' can be found.
--
Fixes build on 32 bit platforms with large file support.
Signed-off-by: Justus Winter <justus@g10code.com>
* THANKS, doc/ChangeLog-2011, tests/ChangeLog-2011,
tests/gpg/geheim.txt: convert from iso 8859-1 to utf-8.
* lang/qt/src/dataprovider.cpp, lang/qt/src/qgpgmerefreshkeysjob.cpp,
lang/qt/src/qgpgmesecretkeyexportjob.cpp: replace U+FFFD REPLACEMENT
CHARACTER with proper U+00E4 LATIN SMALL LETTER A WITH DIAERESIS.
--
Note that src/versioninfo.rc.in is still ISO-8859-1. I don't know
whether Windows will properly handle UTF-8 in this file or not, so i
have not touched it.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* lang/cpp/src/context.cpp
(Context::signaturePolicyURL): return nullptr on default
(to_tofu_policy_t): add default case for unknown
* lang/cpp/src/key.cpp
(Key::primaryFingerprint): return nullptr on default
* lang/cpp/src/tofuinfo.cpp
(GpgME::TofuInfo::policy): add default case for unknown
Signed-off-by: Andreas Stieger <astieger@suse.com>
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* lang/python/Makefile.am (SUBDIRS): Make current dir fist.
* lang/python/tests/Makefile.am (xcheck): Depend on pubring-stamp.
(CLEANFILES): Remove private-keys-v1.d/gpg-sample.stamp.
(check-local): Remove.
(initial.py): Remove dependency.
(./pubring-stamp): Depend on conf files and the
private-keys-v1.d/gpg-sample.stamp file. Also replace use of
basename.
--
This addresses the problem that two rules might run the private keys
copy rule and due to the files being chmod -w during make discheck the
second process running that rule's cp would get a permission error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* lang/python/tests/Makefile.am (./pubring-stamp): Use --batch with
GPG to avoid Pinentries during import when using GnuPG >= 2.1.
Replace touch by echo.
* tests/gpg/Makefile.am (./pubring-stamp): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* lang/qt/tests/Makefile.am (clean-local): Avoid non-portable "--"
* lang/python/Makefile.am (copystamp): Use well defined cp -R instead
of cp -r.
Signed-off-by: Werner Koch <wk@gnupg.org>
* lang/qt/tests/t-tofuinfo.cpp (testTofuPolicy): Add
debug output.
--
The debug output is only emitted before a failure of the
test in case a keylisting of bravo@example.net fails which
it should never do.
* lang/cpp/src/tofuinfo.h (Policy, Validity): Declare sizes.
--
This is a quick ABI break before the release so that we can
easier extend them in the future. All new enums in public API
should be declared with a size from now on.
* src/gpgme.h.in (_GPGME_DEPRECATED): Change to take versio numbers
for documentation. Change all places.
(_GPGME_DEPRECATED_OUTSIDE_GPGME): Ditto.
* lang/python/gpgme-h-clean.py: Adjust RE.
Signed-off-by: Werner Koch <wk@gnupg.org>
* NEWS: Update.
* configure.ac: Check for multiple Python versions.
* lang/python/Makefile.am: Build and install for both Python versions.
* lang/python/tests/Makefile.am: Test both versions.
* lang/python/tests/run-tests.py: New test runner.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/helpers.c (pyDataWriteCb): Handle Python integers being
returned on Python 2.
(pyDataSeekCb): Likewise.
* lang/python/pyme/core.py (Data.__init__): Fix testing for string
argument.
(Data.new_from_filepart): Likewise.
* lang/python/pyme/util.py (is_a_string): New function.
* lang/python/tests/t-encrypt-large.py (read_cb): Force evaluation of
generator.
* lang/python/tests/t-idiomatic.py: Partly skip test on Python 2.
* lang/python/tests/t-verify.py (check_result): Here, the difference
between 2 and 3 really matters. We cannot change the char *
conversion in Python 2 without breaking all existing applications, and
using bytestrings in Python 3 would be very inconvenient.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/helpers.c (_pyme_edit_cb): Drop the const.
(_pyme_assuan_{data,inquire,status}_cb): Fix error handling.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/pyme/core.py (GpgmeWrapper.__repr__): Use more
compatible form of super.
(GpgmeWrapper.__setattr__): Likewise.
(Context.__init__): Likewise.
(Data.__init__): Likewise.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/tests/t-sig-notation.py: Only check the critical flag
when GnuPG >= 2.1.13 is used.
* tests/gpg/t-sig-notation.c: Likewise.
Fixes-commit: c88c9ef3
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/qt/src/qgpgmekeyformailboxjob.cpp: Explicitly include
QStringList.
* lang/qt/tests/t-support.h, lang/qt/tests/t-support.cpp: Move
includes into impl. Explicitly include QDir.
--
This fixes build against Qt versions where the includes are less
implicit.
* src/gpgme.h.in (struct _gpeme_tofu_info): Rename FIRSTSEEN to
SIGNFIRST and LASTSEEN to SIGNLAST. Add ENCRFIST and ENCRLAST.
* src/keylist.c (parse_tfs_record): Parse to ENCRFIRST and ENCRLAST.
* src/verify.c (parse_tofu_stats): Ditto.
* tests/run-keylist.c (main): Adjust and print encrypt stats.
* tests/run-verify.c (print_result): Ditto.
* lang/cpp/src/tofuinfo.h (TofuInfo): Rename firstSeen to signFirst
and lastSeen to signLast. Add encrCount, encrFirst and encrLast.
* lang/cpp/src/tofuinfo.cpp (encrCount, encrFirst, encrLast): New.
--
The latest GnuPG commits have the needed changes but we also allow the
use of currently released GnuPG version.
Signed-off-by: Werner Koch <wk@gnupg.org>
* lang/cpp/src/key.cpp (Key::update): New.
* lang/cpp/src/key.h: Update accordingly.
--
This function helps if you have an incomplete key or want
to make sure all info in a key is complete (e.g. validity / tofuinfo)
* lang/cpp/src/key.cpp (Key, UserID): Add ostream operator.
* lang/cpp/src/key.h: Update accordingly.
--
This is helpful debugging / showing the state of a key / uid and
tofuinfo.
* lang/qt/src/keyformailboxjob.h,
lang/qt/src/qgpgmekeyformailboxjob.h: Fix includes.
--
This ensures that when building qgpgme you do not need an installed
gpgme++.
* lang/qt/src/Makefile.am (AM_CPPFLAGS): Include cpp before core.
--
Both core and cpp have headers that have the same names, this
can lead to the wrong headers beeing included when qt bindings
are built.
* lang/qt/src/keylistjob.h (addMode): New.
* lang/qt/src/qgpgmekeylistjob.h (addMode): New.
* lang/qt/src/qgpgmekeylistjob.cpp (addMode: New.
--
Instead of new API for each new thing lets be a bit more
generic / open.
* lang/qt/src/Makefile.am: Reorder include directives.
--
This fixes the problem that QGpgME would pick up gpgme or
gpgme++ headers from an installed version.
* lang/qt/tests/t-support.cpp (QGpgMETest::copyKeyrings): New helper.
* lang/qt/tests/t-support.h: Declare.
* lang/qt/tests/t-encrypt.cpp: use it
* lang/qt/tests/t-tofuinbo.cpp: ditto.
--
New helper takes care of copying the correct files for either
keybox or keyring.
* lang/qt/tests/t-wkspublish.cpp: New.
* lang/qt/tests/Makefile.am: Update accordingly.
--
Most tests are disabled by default as tey require
an online connection.
Define DO_ONLINE_TESTS to enable the tests.
* lang/qt/src/Makefile.am: Add new files.
* lang/qt/src/job.cpp: Include moc / subclass stub.
* lang/qt/src/protocol.h: Add virtual for new job.
* lang/qt/src/protocol_p.h: Add job.
* lang/qt/src/wkspublishjob.h: Interface for WKSPublishJob.
* lang/qt/src/qgpgmewkspublishjob.cpp,
lang/qt/src/qgpgmewkspublishjob.h: New.
--
The Job was originally intended to be used with a SpawnEngine
Context but QProcess was a better fit for the job.
Usage is similar to the client tool. check, create, recieve.
* lang/cpp/src/key.cpp (Key::primaryFingerprint): Return
fpr value if available.
--
Should not be necessary but we might have an incomplete
key without subkeys but the fingerprint already set in
gpgme's data type.
* lang/cpp/src/key.cpp (UserID::tofuInfo): New.
* lang/cpp/src/key.h: Update accordingly.
* lang/cpp/src/tofuinfo.cpp: Remove dropped fields.
* lang/cpp/src/tofuinfo.h: Update accordingly.
* lang/cpp/src/verificationresult.cpp,
lang/cpp/src/verificationresult.h: Remove tofu info.
* lang/qt/tests/t-tofuinfo.cpp: Disable for now.
--
With be4ff75d7 Tofu info now lives with a UserID
Object. While this breaks API it was not yet released.
* lang/cpp/src/data.cpp (GpgME::Data::Data): Set size-hint for
mem and DataProvider based Data.
--
This fixes the case that QGpgME did not have a total value for
progress as the size was unknown.
* lang/qt/src/defaultkeygenerationjob.cpp,
lang/qt/src/defaultkeygenerationjob.h: New.
* lang/qt/src/Makefile.am: Update accordingly.
--
The defaultkeygenerationjob makes it easier to just generate a key
in the future this should probably use quick-gen key but since this
is not exposed in gpgme we hardcode the defaults and do it with
the params file.
This is also the first job that uses a new and better architecture
without backend abstraction and the pimpl pattern instead of
a specialized subclass.
This is an adoption of kde's libkleo commit f49b7157
Thanks dvratil@kde.org
* lang/qt/src/job.cpp: Include moc and make subclass.
* lang/qt/src/keyformailboxjob.h,
lang/qt/src/qgpgmekeyformailboxjob.cpp,
lang/qt/src/qgpgmekeyformailboxjob.h: New.
* lang/qt/tests/run-keyformailboxjob.cpp: New manual test.
* lang/qt/tests/Makefile.am: Add run-keyformailboxjob.
* lang/qt/src/Makefile.am: Update accordingly.
* lang/qt/src/protocol.h, lang/qt/src/protocol_p.h: Add
keyformailboxjob.
--
The KeyForMailboxjob can be used to determine the best key to
use to encrypt something to a given mail address.
* lang/cpp/src/context.cpp (Context::getKeysFromRecipients):
New helper.
(Context::encrypt, Context::startEncryption, Context::signAndEncrypt)
(Context::startCombinedSigningAndEncryption): Use new helper.
* lang/cpp/src/context.h (Context::getKeysFromRecipients): Add
as private helper.
--
bf776ce was incomplete as the code to handle recpients
was duplicated four times. This is now unified and constently
uses a nullptr instead of an empty array.
* lang/qt/tests/t-encrypt.cpp, lang/qt/tests/t-tofuinfo.cpp: Create
TestPassphraseProvider on stack.
--
Context does not delete the provider. This fixes ASAN errors.
* lang/qt/tests/t-keylist.cpp: Don't include t-support.moc
--
Accidental leftover from trying to generate t-support moc from
another cpp file. This was solved instead by a new rule to generate
moc files from the header.
* lang/qt/tests/Makefile.am: Add t-encrypt and t-support.
* lang/qt/tests/t-support.cpp, lang/qt/tests/t-support.c (QGpgMETest):
New. Class to handle common cleanup / init.
* lang/qt/tests/t-keylist.cpp,
lang/qt/tests/t-keylocate.cpp,
lang/qt/tests/t-ownertrust.cpp,
lang/qt/tests/t-tofuinfo.cpp: Inherit QGpgMETest.
* lang/qt/tests/t-encrypt.cpp: New. Test Symetric and Asymectric
encryption. Mixed encryption test is disabled.
* lang/qt/src/encryptjob.h, lang/qt/src/signencryptjob.h,
lang/qt/src/qgpgmeencryptjob.h, lang/qt/src/qgpgmeencryptjob.cpp,
lang/qt/src/qgpgmesignencryptjob.cpp,
lang/qt/src/qgpgmeencryptjob.cpp: Add start and exec overloads
that accept generic EncryptFlags.
--
While this technically is an ABI break (vtable change) there
are no known classes outside qgpgme that inherit encryptjob
or signencryptjob. And the new functions should be added
to the bottom of the vtable.
* lang/cpp/src/context.cpp (Context::encrypt): If no recipients
are provided encrypt with NULL and not an empty array.
--
Sending an empty array leads to an invalid argument error.
* lang/python/tests/Makefile.am (TESTS_ENVIRONMENT): Prepend path
instead of setting the value.
--
This fixes the case where tools / libararies are needed for
a working GnuPG system that are pointed to by LD_LIBRARY_PATH.
E.g. GnuPG itself is installed in a custom prefix and PATH /
LD_LIBRARY_PATH is set accordingly.
* lang/python/pyme/core.py (Context.keylist): New method.
* lang/python/tests/t-keylist.py: Test new method.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/Makefile.am: Be more careful when cleaning the build
directory, we must not delete the generated file 'pyme/version.py'.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/pyme/core.py (Context.protocol): Check that the engine
is usable before setting the protocol.
(Context._errorcheck): Add missing functions.
Signed-off-by: Justus Winter <justus@g10code.com>
Avoid the name pygpgme, as this is the name of another popular Python
binding for GPGME.
This commit renames the compiled Python module produced by SWIG.
* lang/python/Makefile.am: Rename the compiled Python module.
* lang/python/gpgme.i: Likewise.
* lang/python/pyme/core.py: Likewise.
* lang/python/pyme/errors.py: Likewise.
* lang/python/pyme/util.py: Likewise.
* lang/python/pyme/version.py.in: Likewise.
* lang/python/setup.py.in: Likewise.
Signed-off-by: Justus Winter <justus@g10code.com>
Avoid the name pygpgme, as this is the name of another popular Python
binding for GPGME.
This commit renames all functions that are exported to the Python
world.
* lang/python/helpers.c: Rename all exported functions.
* lang/python/helpers.h: Likewise.
* lang/python/pyme/core.py: Likewise.
Signed-off-by: Justus Winter <justus@g10code.com>
Avoid the name pygpgme, as this is the name of another popular Python
binding for GPGME.
This commit renames all functions that are not exported to the Python
world.
* lang/python/gpgme.i: Rename all private functions.
* lang/python/helpers.c: Likewise.
* lang/python/helpers.h: Likewise.
* lang/python/private.h: Likewise. Also move the SWIG runtime helper
prototypes here.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/Makefile.am (EXTRA_DIST, COPY_FILES): Add new file.
* lang/python/gpgme.i: Include new file and add comments.
* lang/python/helpers.c: Include new file.
* lang/python/helpers.h: Move functions we do not need to expose...
* lang/python/private.h: ... here.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/cpp/src/engineinfo.cpp (EngineInfo::engineVersion): New.
* lang/cpp/src/engineinfo.h (EngineInfo::engineVersion): Declare.
(EngineInfo::Version): Small helper to work with versions.
* src/gpgme.h.in (GPGME_DATA_ENCODING_MIME): New.
* src/data.c (gpgme_data_set_encoding): Adjust check.
* src/engine-gpg.c (have_gpg_version): New.
(gpg_encrypt, gpg_encrypt_sign): Pass flag '--mimemode'.
(gpg_sign): Ditto.
* lang/cpp/src/data.h (GpgME): Add MimeEncoding.
* lang/cpp/src/data.cpp (encoding, setEncoding): Support MimeEncoding.
* src/gpgme-tool.c (server_data_encoding): Add flag --mime.
--
This feature allows an application to declare that the encrypted or
signed data is a valid MIME part.
What is missing is a way to return that information to the application
after decryption/verification. This can be done by setting the
encoding of the output data object; however this requires some
internal additions to our processing model.
Signed-off-by: Werner Koch <wk@gnupg.org>
* lang/cpp/src/context.cpp (supported_features2): Add
BinaryAndFineGrainedIdentify
* lang/cpp/src/global.h (Feature2): ditto.
--
This is mostly for compatible code with KF5::Gpgmepp where there
is no hard requirement against gpgme 1.7. With 1.7 a version
check would also suffice.
* lang/qt/src/Makefile.am (camelcase_headers): New. Create and install
CamelCase headers.
--
For Qt Libraries it is a common pattern that headers are installed
additionally under their Namespace / Class Name so that automated
inclusion works once a class is used in code. This was also
done for QGpgME headers when they lived in Libkleo so this increases
compatibility.
* lang/cpp/src/gpgmepp_version.h.in,
lang/qt/src/qgpgme_version.h.in: New. Version information.
* lang/qt/src/Makefile.am, lang/cpp/src/Makefile.am: Add them.
* configure.ac: Configure them.
--
The version headers are common practice in KDE Frameworks and
were installed for KF5Gpgmepp and Libkleo respectively.
* lang/python/gpgme.i (gpgme_data_t): Rework so that it works without
access to the definition of 'struct gpgme_data'.
* lang/python/helpers.c (object_to_gpgme_data_t): Add assertion.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/qt/tests/t-tofuinfo.cpp: Disable tests.
--
Even with the wait this test could fail and anyway the delay
was not nice. So we remove the wait hack and just wait for
the bug (2405) to be fixed in GnuPG or GpgME core.
Fixes an issue with newer versions of Python.
* lang/python/helpers.c (pygpgme_raise_callback_exception): Be more
careful when restoring the exception.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/cpp/src/key.cpp (Subkey::publicKeyAlgorithmAsString): New
static variant.
* lang/cpp/src/key.h: Declare function. Clarify comment about name
mismatch.
* lang/qt/tests/Makefile.am (AM_CPPFLAGS): Include cpp before
gpgme src directory.
--
This fixes a problem where context.h would be picked up from gpgme/src
instead of including the context.h from gpgme++.
* lang/qt/src/threadedjobmixin.h: Revert using full path
for context.h
--
This reverts commit 47bfbc9026 as
it causes problems depending on the include path. The proper
fix will be to ensure that cpp/src is included before gpgme/src.
* lang/qt/src/threadedjobmixin.h: When building qgpgme look for
context.h in the full cpp subdirectory.
--
Gpgme core also contains a context.h that can lead to confusion
otherwise.
* src/lang/qt/tests/t-tofuinfo.cpp(testTofuSignCount): New.
(initTestCase): Set gpg-agent loopback pinentry config.
(signAndVerify): Helper for tofuTestSignCount.
--
Also needs the wait code because of GnuPG-Bug-Id: 2405
* lang/qt/tests/t-tofuinfo.cpp: New.
* lang/qt/tests/Makefile.am: Update accordingly.
--
The test currently contains a workaround for GnuPG-Bug-Id 2405
* lang/cpp/src/editinteractor.cpp (status_to_error): No error
for KEYEXPIRED.
--
As keyexpired status is sent even if a subkey is expired
we can not treat it as a global error.
Results returned by the GPGME are fragile, i.e. they are only valid
until the next operation is performed in the context.
We cannot arbitrarily constrain the lifetime of Python objects, we
therefore create deep copies of the results.
* lang/python/gpgme.i (gpgme_tofu_info_t): Turn these into a list.
(gpgme_*_result_t): Create deep copies of these objects.
* lang/python/helpers.c (pygpgme_wrap_fragile_result): New function.
* lang/python/helpers.h (pygpgme_wrap_fragile_result): New prototype.
* lang/python/pyme/results.py: New file.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/Makefile.am (gpgme_wrap.c): Use '-builtin' to make SWIG
generate builtin types for c types.
* lang/python/gpgme.i (pygpgme_wrap_gpgme_data_t): Adapt slightly.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/pyme/core.py: Rename '_getctype' to '_ctype' and turn it
into a string. Likewise rename '_getnameprepend' to '_cprefix'.
* lang/python/helpers.c: Adapt accordingly.
Signed-off-by: Justus Winter <justus@g10code.com>
Simplify how the lifetime of callback arguments is managed.
* lang/python/gpgme.i (gpgme_edit_cb_t): Check arguments.
(PyObject_p_p, void_p_p): Drop rather dangerous interface.
(pygpgme_unwrap_gpgme_ctx_t): New function.
* lang/python/helpers.c (pygpgme_clear_generic_cb): Drop dangerous
function.
(pyPassphraseCb): Assert contract.
(pygpgme_set_passphrase_cb): Use Python's calling convention so that
we can raise exceptions. Hand in 'self', get the wrapped object, and
simply store the hook data as attribute of the wrapper object.
(pyProgressCb, pygpgme_set_progress_cb): Likewise.
(pygpgme_set_status_cb): Likewise.
(pygpgme_data_new_from_cbs): Likewise.
* lang/python/helpers.h (pygpgme_clear_generic_cb): Drop prototype.
(pygpgme_set_passphrase_cb): Update prototype.
(pygpgme_set_progress_cb): Likewise.
(pygpgme_set_status_cb): Likewise.
(pygpgme_data_new_from_cbs): Likewise.
(pygpgme_unwrap_gpgme_ctx_t): New prottotype.
* lang/python/pyme/core.py (Context, Data): Update callsites.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/Makefile.am: Add the toplevel source directory to CFLAGS
when compiling the bindings so that we can use private header files.
* lang/python/gpgme.i (gpgme_data_t): Rework the object wrapping. Do
not create a Python wrapper object, merely a gpgme_data_t object, and
keep references to buffer objects, if any. If necessary, update the
buffer after the function call.
(pygpgme_wrap_gpgme_data_t): New function.
* lang/python/helpers.c (object_to_gpgme_data_t): Rework object
wrapping. Also wrap objects implementing the buffer protocol.
* lang/python/helpers.h (object_to_gpgme_data_t): Update prototype.
(pygpgme_wrap_gpgme_data_t): New prototype.
* lang/python/tests/t-idiomatic.py: Demonstrate this.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/Makefile.am: Copy the README file.
* lang/python/README: Rename, convert to org, and update.
* lang/python/pyme/__init__.py: Move license out of the docstring,
update docstring.
* lang/python/pyme/core.py: Add and update docstrings.
Signed-off-by: Justus Winter <justus@g10code.com>
* configure.ac: Generate 'setup.py' and 'version.py'.
* lang/python/Makefile.am: Use generated setup script.
* lang/python/pyme/version.py: Turn it into a template, and get
version information from the build system. Also drop some variables.
* lang/python/setup.py: Likewise. This way we can avoid importing the
version module, which is frowned upon and actually caused a problem.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/pyme/core.py (Context.__del__): Make function
idemptotent.
(Context.{__enter__,__exit__}): Implement the context manager
protocol.
(Data.__del__): Make function idemptotent, drop debug print.
(Data.{__enter__,__exit__}): Implement the context manager
protocol.
* lang/python/tests/t-idiomatic.py: Demonstrate this.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/gpgme.i: Fix freeing an uninitialized pointer in the
error handling of generated wrapper functions by explicitly storing
the pointer in a local variable which can be initialized.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/gpgme.i (gpgme_data_t): Use new function to create
wrapper objects if necessary, and deallocate them after the function
call.
* lang/python/helpers.c (object_to_gpgme_data_t): New function.
* lang/python/helpers.h (object_to_gpgme_data_t): New prototype.
* lang/python/tests/Makefile.am (pytests): Add new test.
* lang/python/tests/t-idiomatic.py: New file.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/Makefile.am: Pass CFLAGS to python build system.
* lang/python/helpers.c (pyPassphraseCb): Use correct type for length.
(pygpgme_data_new_from_cbs): Drop unused variable.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/cpp/src/editinteractor.cpp (EditInteractor::needsNoResponse):
Use whitelist instead of blacklist.
--
This should be more robust when new status messages are added.
The whitelist is the same GPA uses. Fixes Qt's t-ownertrust.
instead of calling gpg-error-config.
This is useful when configuring with --with-gpgerror-prefix
because then GPG_ERROR_CONFIG contains the correct
/path/to/bin/gpg-error-config whereas calling gpg-error-config
directly would look in the user's PATH (and not in the prefix
where gpg-error-config was installed).
Signed-off-by: Justus Winter <justus@gnupg.org>
* lang/python/pyme/core.py (Data._error_check): Add
'gpgme_data_get_file_name' to the list of functions not returning an
error code.
* lang/python/tests/Makefile.am (pytests): Add new tests.
* lang/python/tests/support.py (verbose): New variable.
* lang/python/tests/t-data.py: Test setting and getting the filename.
* lang/python/tests/t-encrypt-large.py: New file.
* lang/python/tests/t-file-name.py: Likewise.
* lang/python/tests/t-trustlist.py: Likewise.
Signed-off-by: Justus Winter <justus@gnupg.org>
Handing a reference to the wrapper object created a non-trivial
circular reference that Pythons garbage collector is unable to break.
Explicitly break it by using a weak reference.
* lang/python/helpers.c (pygpgme_stash_callback_exception): Retrieve
object from weak reference.
* lang/python/pyme/core.py (Context.__del__): Free status callback.
(Context.set_passphrase_cb): Use a weak reference.
(Context.set_progress_cb): Likewise.
(Context.set_status_cb): Likewise.
(Context.op_edit): Likewise.
Signed-off-by: Justus Winter <justus@gnupg.org>
* lang/python/pyme/core.py (Data.__init__): Add 'copy' kwargument, and
pass it to functions supporting it. PEP8 fix.
(Data.new_from_fd): PEP8 fix.
(Data.new_from_file): Give a more helpful error message if copy is
False. PEP8 fix.
(Data.new_from_fd): Hand the file descriptor to
'gpgme_data_new_from_fd', not a stream. Fix docstring.
* lang/python/tests/t-data.py: Add tests for this.
Signed-off-by: Justus Winter <justus@gnupg.org>
* lang/python/pyme/core.py (Context.wait): Improve docstring. As the
context passed to 'gpgme_wait' is never NULL, it is pointless to look
at the returned context. Always raise exceptions.
* lang/python/tests/Makefile.am (pytests): Add new test.
* lang/python/tests/t-wait.py: New file.
Signed-off-by: Justus Winter <justus@gnupg.org>
* lang/qt/tests/t-ownertrust.cpp: New test.
* lang/qt/tests/Makefile.am: Add test.
--
This test would have catched the issue created by not handling
GPGME_STATUS_KEY_CONSIDERED.
* lang/python/helpers.c (pyPassphraseCb): Cope with 'uid_hint' being
NULL, convert it to an Unicode object, and cope with the callback
returning both Unicode and bytes objects.
Signed-off-by: Justus Winter <justus@gnupg.org>
* lang/qt/tests/Makefile.am (AM_CPPFLAGS): Add -DBUILDING_QGPGME.
--
Without building QGpgME the headers of gpgme++ are not included
corretly and taken from an already installed gpgme++.
* lang/cpp/src/context.cpp,
lang/cpp/src/context.h,
lang/cpp/src/context_p.h (Context::createForEngine),
(Context::edit, Context::startEditing),
(Context::takeLastEditInteractor, Context::cardEdit),
(Context::startCardEditing, Context::takeLastCardEditInteractor),
(Context::assuanTransact, Context::startAssuanTransaction),
(Context::takeLastAssuanTransaction): Port to unique_ptr.
* lang/qt/src/qgpgmeadduseridjob.cpp,
lang/qt/src/qgpgmechangeexpiryjob.cpp,
lang/qt/src/qgpgmechangeownertrustjob.cpp,
lang/qt/src/qgpgmechangepasswdjob.cpp,
lang/qt/src/qgpgmesignkeyjob.cpp: Update accordingly.
--
This is another API break but as we already broke API with GpgME++
and QGpgME from KDE Frameworks this is a good time to do this
to avoid using a deprected C++ class in the API.
* lang/python/Makefile.am: Add bits from the c test suite.
* lang/python/support.py: New file.
* lang/python/t-decrypt.py: Likewise.
* lang/python/t-encrypt.py: Likewise.
Signed-off-by: Justus Winter <justus@gnupg.org>
* lang/python/pyme/core.py: Avoid races at interpreter shutdown. This
silences the most annoying occurrences, however this problem also
affects the SWIG generated code, which might indicate that the real
problem is somewhere else. If so, this change can be easily reverted.
Signed-off-by: Justus Winter <justus@gnupg.org>
* lang/python/gpgme.i: Adjust to Python3's string type being
'Unicode', not 'bytes'. Fix type checking.
* lang/python/core.py (Data.write): Add docstring mentioning the
expected type of parameter 'buffer'.
(Data.read): Adjust read loop. Also, use a saner chunk size, and join
all chunks at the end instead of adding them.
* lang/python/examples/simple.py: Adjust example.
Signed-off-by: Justus Winter <justus@gnupg.org>
* lang/cpp/src/Makefile.am (AM_CPPFLAGS): Add gpgme.h location.
--
This fixes the build in case an incompatible gpgme.h is also
installed in other include locations.
* configure.ac: Make Python bindings configurable, add new Makefile.
* lang/python/Makefile.am: New file.
* lang/python/setup.py: Integrate into the build system.
* m4/ax_pkg_swig.m4: New file from the autoconf archive.
* m4/m4_ax_swig_python.m4: Likewise.
Signed-off-by: Justus Winter <justus@gnupg.org>
* lang/qt/src/Makefile.am (qgpgme_headers): Add protocol.h
(private_qgpgme_headers): Add protocol_p.h
* lang/qt/src/protocol.h: New. From QGpgMEBackend.
* lang/qt/src/protocol_p.h: New. From QGpgMEBackend.
* lang/qt/src/qgpgmebackend.h,
lang/qt/src/qgpgmebackend.cpp (Protocol): Removed.
--
The backend class does not make much sense anymore as we
only have the GpgME backend obviously. It's purpose was
for Libkleo's Backend abstraction.
* lang/qt/src/Makefile.am: Do not install all headers.
--
The qgpgme classes hide the implementation and thus make it
easier to change it without ABI breaks. They should not
be installed.
* lang/cpp/src/editinteractor.cpp (EditInteractor::needsNoResponse):
Add GPGME_STATUS_PINENTRY_LAUNCHED.
--
PINENTRY_LAUNCHED needs no response in any Job. This fixes
Jobs which errored out on unknown status lines.
* configure.ac: Look for doxygen if qt is built.
Configure new files.
* lang/qt/doc/Doxyfile.in: New.
* lang/qt/doc/Makefile.am: New.
* lang/qt/README: Update.
--
Currently this is a standard doxyfile template without much
customization.
* lang/qt/tests/t-keylist.cpp: Verify that GNUPGHOME is set.
* lang/qt/tests/initial.test: New dummy test.
* lang/qt/tests/Makefile.am: Add dependency to initial.test
--
Feels weird but this follows the pattern in tests/gpg/Makefile.am
and solves the problem that the environment is dirty.
* lang/cpp/src/global.h (GPGMEPP_MAKE_STRCMP): New.
(_gpgmepp_strcmp): NULL save wrapper around std::strcmp.
* lang/cpp/src/key.h: Add comparators for various attributes.
--
This was taken from libkleo predicates.h. Appears generally useful.
* lang/qt/src/qgpgmebackend.cpp (QGpgME::openpgp, QGpgME::smime): New.
* lang/qt/src/qgpgmebackend.h: Declare.
* lang/qt/tests/t-keylist.cpp (KeyListTest::testSingleKeyListSync):
Use new functions.
--
This replaces the cryptobackendfactory functionality from libkleo.
* configure.ac: Configure test Makefile.
* m4/qt.m4: Look up Qt5Test flags.
* lang/qt/tests/t-keylist.cpp: New. Simple keylist check.
* lang/qt/tests/Makefile.am: New. General test framework.
--
This test mostly checks that it basically compiles / works and
adds a test framework.
* qgpgmeadduseridjob.cpp,
qgpgmechangeexpiryjob.cpp,
qgpgmechangeownertrustjob.cpp,
qgpgmechangepasswdjob.cpp,
qgpgmedecryptjob.cpp,
qgpgmedecryptverifyjob.cpp,
qgpgmedeletejob.cpp,
qgpgmedownloadjob.cpp,
qgpgmeencryptjob.cpp,
qgpgmeexportjob.cpp,
qgpgmeimportfromkeyserverjob.cpp,
qgpgmeimportjob.cpp,
qgpgmekeygenerationjob.cpp,
qgpgmekeylistjob.cpp,
qgpgmelistallkeysjob.cpp,
qgpgmerefreshkeysjob.cpp,
qgpgmesecretkeyexportjob.cpp,
qgpgmesignencryptjob.cpp,
qgpgmesignjob.cpp,
qgpgmesignkeyjob.cpp,
qgpgmeverifydetachedjob.cpp,
qgpgmeverifyopaquejob.cpp: Add missing MOC includes.
--
In the CMake world this was handled by cmake automoc
suppport and not neccessary.
* cpp/qt/src/job.h: Remove showErrorDialog.
--
If additional error handling is neccessary emitting
signals to a gui application would be better API for qgpgme.
* lang/qt/src/qgpgmecryptoconfig.cpp,
lang/qt/src/qgpgmecryptoconfig.h: Removed.
* lang/qt/src/qgpgmebackend.cpp: Return newcryptoconfig.
--
The GpgME based config class is the way forward and the
old class was using KDE Code. Probably needs some bugfixes
as previously the new class was only used for Windows CE
* lang/cpp/src/GpgmeppConfig.cmake.in.in
lang/qt/src/QGpgmeConfig.cmake.in.in: Include directory above headers.
--
This ensures that code using #inlcude <gpgme++/header.h> still works.
* lang/qt/src/Makefile.am,
lang/qt/src/abstractimportjob.h,
lang/qt/src/adduseridjob.h,
lang/qt/src/changeexpiryjob.h,
lang/qt/src/changeownertrustjob.h,
lang/qt/src/changepasswdjob.h,
lang/qt/src/cryptoconfig.h,
lang/qt/src/decryptjob.h,
lang/qt/src/decryptverifyjob.h,
lang/qt/src/deletejob.h,
lang/qt/src/downloadjob.h,
lang/qt/src/encryptjob.h,
lang/qt/src/exportjob.h,
lang/qt/src/hierarchicalkeylistjob.h,
lang/qt/src/importfromkeyserverjob.h,
lang/qt/src/importjob.h,
lang/qt/src/job.cpp,
lang/qt/src/job.h,
lang/qt/src/keygenerationjob.h,
lang/qt/src/keylistjob.h,
lang/qt/src/listallkeysjob.h,
lang/qt/src/multideletejob.h,
lang/qt/src/qgpgmeadduseridjob.cpp,
lang/qt/src/qgpgmeadduseridjob.h,
lang/qt/src/qgpgmebackend.cpp,
lang/qt/src/qgpgmebackend.h,
lang/qt/src/qgpgmechangeexpiryjob.cpp,
lang/qt/src/qgpgmechangeexpiryjob.h,
lang/qt/src/qgpgmechangeownertrustjob.cpp,
lang/qt/src/qgpgmechangeownertrustjob.h,
lang/qt/src/qgpgmechangepasswdjob.cpp,
lang/qt/src/qgpgmechangepasswdjob.h,
lang/qt/src/qgpgmecryptoconfig.cpp,
lang/qt/src/qgpgmecryptoconfig.h,
lang/qt/src/qgpgmedecryptjob.cpp,
lang/qt/src/qgpgmedecryptjob.h,
lang/qt/src/qgpgmedecryptverifyjob.cpp,
lang/qt/src/qgpgmedecryptverifyjob.h,
lang/qt/src/qgpgmedeletejob.cpp,
lang/qt/src/qgpgmedeletejob.h,
lang/qt/src/qgpgmedownloadjob.cpp,
lang/qt/src/qgpgmedownloadjob.h,
lang/qt/src/qgpgmeencryptjob.cpp,
lang/qt/src/qgpgmeencryptjob.h,
lang/qt/src/qgpgmeexportjob.cpp,
lang/qt/src/qgpgmeexportjob.h,
lang/qt/src/qgpgmeimportfromkeyserverjob.cpp,
lang/qt/src/qgpgmeimportfromkeyserverjob.h,
lang/qt/src/qgpgmeimportjob.cpp,
lang/qt/src/qgpgmeimportjob.h,
lang/qt/src/qgpgmekeygenerationjob.cpp,
lang/qt/src/qgpgmekeygenerationjob.h,
lang/qt/src/qgpgmekeylistjob.cpp,
lang/qt/src/qgpgmekeylistjob.h,
lang/qt/src/qgpgmelistallkeysjob.cpp,
lang/qt/src/qgpgmelistallkeysjob.h,
lang/qt/src/qgpgmenewcryptoconfig.cpp,
lang/qt/src/qgpgmenewcryptoconfig.h,
lang/qt/src/qgpgmerefreshkeysjob.cpp,
lang/qt/src/qgpgmerefreshkeysjob.h,
lang/qt/src/qgpgmesecretkeyexportjob.cpp,
lang/qt/src/qgpgmesecretkeyexportjob.h,
lang/qt/src/qgpgmesignencryptjob.cpp,
lang/qt/src/qgpgmesignencryptjob.h,
lang/qt/src/qgpgmesignjob.cpp,
lang/qt/src/qgpgmesignjob.h,
lang/qt/src/qgpgmesignkeyjob.cpp,
lang/qt/src/qgpgmesignkeyjob.h,
lang/qt/src/qgpgmeverifydetachedjob.cpp,
lang/qt/src/qgpgmeverifydetachedjob.h,
lang/qt/src/qgpgmeverifyopaquejob.cpp,
lang/qt/src/qgpgmeverifyopaquejob.h,
lang/qt/src/refreshkeysjob.h,
lang/qt/src/signencryptjob.h,
lang/qt/src/signjob.h,
lang/qt/src/signkeyjob.h,
lang/qt/src/specialjob.h,
lang/qt/src/threadedjobmixin.cpp,
lang/qt/src/threadedjobmixin.h,
lang/qt/src/verifydetachedjob.h,
lang/qt/src/verifyopaquejob.h: New.
* lang/qt/src/Makefile.am:
--
The ShowErrorMessage calls were removed and are to be replaced
by error signals / error status which the UI should then handle.
This allowed to port away from KMessageBox and KLocalizedstring.
Additionally this removed the old process bases qgpgmeconfigdialog,
and GnuPGProcessBase. Classes using GnuPGProcessbase were changed
to KProcess api.
This is a first compiling version. API is subject to change to
resolve the split between base jobs and qgpgme classes.
* configure.ac: Add version defines. Check for qt if neccessary.
* lang/README: Mention qt
* lang/cpp/src/GpgmeppConfig.cmake.in.in: Remove comment. Find qgpgme.
* lang/qt/src/Makefile.am: New. Build qgpgme.
* lang/qt/README,
lang/qt/src/Makefile.am,
lang/qt/src/QGpgmeConfig.cmake.in.in,
lang/qt/src/QGpgmeConfigVersion.cmake.in,
lang/qt/src/dataprovider.cpp,
lang/qt/src/dataprovider.h,
lang/qt/src/qgpgme_export.h,
m4/qt.m4: New.
* lang/cpp/src/GpgmeppConfig.cmake.in.in,
lang/cpp/src/Makefile.am: Fix generated config file.
--
For now this is just the dataprovider which was part of the
KF5 Gpgmepp QGpgme variant. This is very thin but a useful
class which is used downstream.
* configure.ac: Add libgpgmepp version. Configure cmake files.
* lang/cpp/src/Makefile.am: Add targets for cmake files.
(EXTRA_DIST): Add cmake files.
--
This should smooth the transition for downstream users that
have worked with KF5::Gpgmepp previously.
* acinclude.m4 (LIST_MEMBER): New macro.
* configure.ac (enable-languages): New option. Add info output.
* lang/Makefile.am: Only add enabled language subdirs.
* GUI examples written with pygtk, which has not been ported to Python
3 and won't be as it is for GTK2 and GNOME is moving to GTK3.
* New GUI examples may be required in future using any of several GUI
frameworks (e.g. wxPython, PyQt, PySide, PyGObject, etc.).
* Port of PyME 0.9.0 for Python 2 to Python 3 along with most of the
example scripts.
* Intended to be developed in parallel with the original Python 2
version until such time as a rewrite of GPGME leads to developing an
IO API in Python 3 from scratch.
* Python 3 PyME and API maintainer has entered, stage left with current
GPG key ID 0x321E4E2373590E5D, primary fingerprint is "DB47 24E6 FA42
86C9 2B4E 55C4 321E 4E23 7359 0E5D" and signing subkey fingerprint is
"B7F0 FE75 9387 430D D0C5 8BDB 7FF2 D371 35C7 553C" for future
reference with git commit signatures.
* Some of them cannot be properly tested on OS X, especially with GTK in
the mix (it works on OS X, but is unlikely to be as easily accessible
as Cocoa or Qt).
* Most major functions are showcased and do work, albeit sometimes with
false positives of error messages, at least on OS X.
* exportimport works, but will still segfault for an as yet unknown
reason.
* genkey produces a traceback error, but does create the key as
intended.
* matched passphrase in signverify.
* Changed plaintext string to byte literal.
* Nested key selection in a try/except statement in case of
UnicodeEncodeError instances.
* Tested successfully on over 9,000 keys.
* The entirety of the Python 3 port of PyME up to commit
2145348ec54c6027f2ea20f695de0277e2871405
* The old commit log has been saved as
lang/py3-pyme/docs/old-commits.log
* Can be viewed as a normal (separate) git repository at
https://github.com/adversary-org/pyme3
* Utilising the submodule feature of git was deliberately skipped on
humanitarian grounds (in order to prevent pain and suffering on the
part of anyone having to manage this repository).
