* src/verify.c (op_data_t): Add conflict_user_seen.
(parse_tofu_user): Return ERR_DUP_VALUE for mutltiple TOFU_USERS.
(_gpgme_verify_status_handler): Handle ERR_DUP_VALUE from
parse_tofu_user to ignore the next TOFU_STATS.
--
This fixes TOFU Conflict verification with GnuPG-2.1.17 and 2.1.18
GnuPG-Bug-Id: 2914
* configure.ac (vasprintf): Remove check.
* src/vasprintf.c: Remove file.
* src/util.h (vasprintf, asprintf): Remove prototypes. Replace all
calls to vasprintf and asprintf by gpgrt_vasprintf or gpgrt_asprintf.
Also take care to use gpgrt_free on the returned value.
* src/w32-util.c (_gpgme_get_gpgconf_path): Replace a gpgrt_asprintf
by _gpgme_strconcat.
(snprintf): New macro to use gpgrt_snprintf instead of the system's
standard snprintf.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
It is common that developers look up only the header file and do not
read the manual. These comments should make it clear that most
structures in gpgme.h are read-only and may only be allocated by
gpgme.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (gpgme_data_rewind): Un-deprecate.
* src/data-compat.c (gpgme_data_rewind): Move to ...
* src/data.c (gpgme_data_rewind): here.
--
That function is very convenient because it is required a lot with
memory streams. It also documents the intention of the caller better
than gpgme_data_seek with its addition parameters and the need to map
system errors. Thus it does not make sense to make it a first class
citizen again.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/key.c (gpgme_key_unref): Always free address if set.
(_gpgme_key_append_name): Remove memory optimization for address.
--
The check if address is not allocated would now be more complicated
then just comparing it to email because email is set to address
also when an email was not parsed from the user id.
* src/key.c (_gpgme_key_append_name): Set email and remove name
for uid only keys.
--
If we have a name and no email but the name can be parsed as
an address we now treat the address as email and remove the name.
This fixes downstream users that rely on email to show email
addresses and don't expilicity handle this case.
E.g. A userid foo@example.com was:
uid->name = "foo@example.com"
uid->email = ""
uid->address = "foo@example.com"
It is now:
uid->name = ""
uid->email = "foo@example.com"
uid->address = "foo@example.com"
* lang/qt/tests/t-support.h (QSIGNALSPY_TIMEOUT): New macro.
* lang/qt/tests/t-encrypt.cpp: Use the new macro as timeout when
waiting for signals.
* lang/qt/tests/t-keylist.cpp: Likewise.
* lang/qt/tests/t-keylocate.cpp: Likewise.
* lang/qt/tests/t-ownertrust.cpp: Likewise.
* lang/qt/tests/t-wkspublish.cpp: Likewise.
--
Increase the timeout when waiting for signals from 5 seconds to 60.
This addresses intermittent test failures on slow machines.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpg/t-gpgconf.c (main): Reduce iterations to 10.
* tests/gpg/t-thread-keylist-verify.c,
tests/gpg/t-thread-keylist.c (THREAD_COUNT): Reduce to 10.
--
While these tests tested for race conditions a smaller number
of iteration should still show problems if they are run on
multiple systems and regulary. While the 100 Thread count in
the t-thread tests could lead to resource problems.
* lang/python/gpgme.i: Added gpgme_op_keylist_start with defaults
* lang/python/tests/t-keylist.py: Added tests for default parameters
--
To increase the ease of use, op_keylist_start
parameters default to sensible values.
The empty string matches all keys.
We assume that the user wants to retrieve public keys most of the time,
so we default to public keys rather than secret keys.
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* tests/start-stop-agent: Don't autostart agent on --stop and
running check. Use --debug-quick-random when starting.
--
This should speed up the tests especially on low entropy systems.
Possibly fixing a hang on pythons op_genkey test in the Launchpad
build enviorment (see launchpad issue 1655298)
* src/w32-io.c (writer): Only stop once the buffer is drained.
(destroy_writer): Wait for the writers buffer to be drained. This
aligns '_gpgme_io_close's behavior with close(2) and fclose(3).
GnuPG-bug-id: 2881
Signed-off-by: Justus Winter <justus@g10code.com>
* src/engine-gpgconf.c (gpgconf_write): Connect a pipe to the child's
stderr, and wait for it to be closed as an indication that gpgconf has
exited. Also improve error handling.
GnuPG-bug-id: 2881
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpg/t-gpgconf.c: Include support functions.
(fail_if_err): Remove macro.
(init_gpgme): Remove function.
(lookup): New function.
(main): Update some values and verify that the changes are applied.
* tests/gpg/t-support.h (test): New assert-like macro.
GnuPG-bug-id: 2881
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/qt/src/Makefile.am (qgpgme_sources): Add cryptoconfig.cpp
* lang/qt/src/cryptoconfig.cpp: New.
* lang/qt/src/cryptoconfig.h (CryptoConfigEntry::stringValueList):
New.
* lang/qt/src/qgpgmenewcryptoconfig.cpp
(QGpgMENewCryptoConfigEntry::stringValueList): New.
* lang/qt/src/qgpgmenewcryptoconfig.h: Update accordingly.
--
This is a pardigm change in cryptoconfig.h to avoid ABI breaks
with each new config value we support it now has an implementation
that is directly related to qgpgmenewcryptoconfig, which is now
the only one.
* lang/qt/tests/t-support.h (TestPassphraseProvider::getPassphrase):
Use gpgrt_asprintf instead of strdup.
--
To avoid problems on MacOS we want to avoid strdup so that
qgpgme can be built without extensions. But qstrdup allocates
with new and not with malloc, so use gpgrt_asprintf instead.
* configure.ac: Set HAVE_MACOS_SYSTEM conditional.
* lang/qt/src/Makefile.am,
lang/cpp/src/Makefile.am,
lang/qt/src/QGpgmeConfig.cmake.in.in,
lang/cpp/src/GpgmeConfig.cmake.in.in: Use libsuffix again to
distinguish between macos .dylib
--
GnuPG-Bug-Id: 2884
* lang/python/tests/run-tests.py: Add and honor a switch '--quiet'.
This way we can use this script to run Python tests one by one without
the noise, and the script will setup the necessary environment for us.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/qt/src/cryptoconfig.h (CryptoConfig::sync): Document
that runtime option is always set.
* lang/qt/Src/qgpgmenewcryptoconfig.cpp
(QGpgMENewCryptoConfigComponent::sync): Remove outdated comment
and warn on error.
* src/engine-gpgconf.c (gpgconf_write): Add --runtime.
* src/gpgme.h.in (gpgme_conf_opt_change): Document this
behavior.
--
If a tool uses GPGME for changing configuration values it
needs a way to ensure that these changes take effect. Otherwise
users may change and see config values and do not understand
why they are not working.
* src/engine-gpg.c (gpg_addkey): Pass --batch to gpg when
GPGME_CREATE_NOPASSWD is set to fix pinentry without loopback mode.
--
Signed-off-by: Ben Kibbey <bjk@luxsci.net>
* m4/qt.m4: Use grep -E when using the alternation character.
--
POSIX specifies '|' is only supposed to work as an alternation special
character when grep is used in extended mode. The code worked fine
with GNU grep because it accepts extended regular expressions by
default, but other POSIX-compliant implementations might fail and take
it literally.
Signed-off-by: Raphael Kubo da Costa <rakuco@FreeBSD.org>
* lang/cpp/src/key.cpp (Key::update): Check for
a secret key first before listing public keys.
--
This is a performance delay but the update should
only be called in a non gui thread anyway. The information
if we have the secret key for this key is important to provide
after update.
* lang/cpp/src/key.cpp (UserID::addrSpec): Use uid->address instead
of normalizing again.
(&operator<<(std::ostream &, const UserID &): Print it.
--
This saves a normalization and fixes the case where a user id
is just a mail address without name, in that case gpgme sets
"address" but not email. Because the email is then the name.
* lang/cpp/src/verificationresult.cpp
(Signature::key(bool,bool)): Don't update the returned copy
but the actual key of the signature.
--
The whole point of the update is to change the partial key
from the signature (e.g. only fingerprint and one uid as we
would have from tofu) to a fully keylisted one.
--
While educating students we can also get them to use useful habits, in
particular to parenthese bit tests.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpgme.texi (gpgme_sigsum_t summary): Clarify what "you
can check one bit means"
--
It was unclear which bit to test for is. And tests
with students have shown that they would "test" for
this one bit by using if(sig.summary == GPGME_SIGSUM_VALID)
which would fail because valid sigs are also SIGSUM_GREEN.
So lets give an example for people not used to checking bits and
clarify through this example which bit is meant to be checked.
* lang/python/helpers.c (_gpg_obj2gpgme_data_t): Extended error
message.
* lang/python/tests/t-encrypt.py: Test for "encode" in error message.
--
The motivation is to help the user when encrypting fails. I claim that
it is not obvious to not being able to encrypt a string directly. To
nudge the user into encoding it to bytes, the error message is a bit
extended.
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* lang/python/gpgme.i (wrapresult): New Macro.
--
This reduces the amount of copy and pasted code at the expense of a
slightly more complicated logic with a macro.
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* lang/python/tests/support.py (print_data): Add check for buffer.
--
When running with something like make -C lang/python check verbose=2 the
test would fail under python2, because the file objects do not have a
buffer property.
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* lang/python/gpg/core.py (Context.__repr__): New function.
--
This makes Context objects look nicer in a REPL.
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* lang/python/gpg/results.py (Result.__str__): Renamed to '__repr__'
...
* lang/python/gpg/results.py (Result.__repr__): ... and added fields.
--
So that it looks a bit nicer in the Python REPL.
It looked like this before:
In [2]: gpg.core.get_engine_info()[0]
Out[2]:
<gpg.results.EngineInfo at 0x7fb23509a240>
Now the output is
In [2]: gpg.core.get_engine_info()[0]
Out[2]:
EngineInfo(file_name='/usr/bin/gpg2', home_dir=None,
protocol=0, req_version='1.4.0', version='2.1.11')
This also applies to other results, e.g. the ImportResult.
Note that the format now changed from "<Class >" to "Class()". The
Python documentation on repr states: "For many object types, including
most builtins, eval(repr(obj)) == obj."
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* lang/cpp/src/GpgmeppConfig.cmake.in.in: Remove a forgotten
instance of @libsuffix@.
--
b2c07bd47b removed @libsuffix@ from
cmake config files, but missed one instance.
Signed-off-by: Heiko Becker <heirecka@exherbo.org>
