aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/igb
Commit message (Collapse)AuthorAgeFilesLines
* igb: fix link test skipping when interface is admin downKohei Enju2025-09-091-4/+1
| | | | | | | | | | | | | | | | | | The igb driver incorrectly skips the link test when the network interface is admin down (if_running == false), causing the test to always report PASS regardless of the actual physical link state. This behavior is inconsistent with other drivers (e.g. i40e, ice, ixgbe, etc.) which correctly test the physical link state regardless of admin state. Remove the if_running check to ensure link test always reflects the physical link state. Fixes: 8d420a1b3ea6 ("igb: correct link test not being run when link is down") Signed-off-by: Kohei Enju <[email protected]> Reviewed-by: Paul Menzel <[email protected]> Tested-by: Rinitha S <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* igb: Fix NULL pointer dereference in ethtool loopback testTianyu Xu2025-09-091-2/+1
| | | | | | | | | | | | | | | | | | | The igb driver currently causes a NULL pointer dereference when executing the ethtool loopback test. This occurs because there is no associated q_vector for the test ring when it is set up, as interrupts are typically not added to the test rings. Since commit 5ef44b3cb43b removed the napi_id assignment in __xdp_rxq_info_reg(), there is no longer a need to pass a napi_id to it. Therefore, simply use 0 as the last parameter. Fixes: 2c6196013f84 ("igb: Add AF_XDP zero-copy Rx support") Reviewed-by: Aleksandr Loktionov <[email protected]> Reviewed-by: Joe Damato <[email protected]> Signed-off-by: Tianyu Xu <[email protected]> Reviewed-by: Paul Menzel <[email protected]> Tested-by: Rinitha S <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* Merge tag 'net-next-6.17' of ↵Linus Torvalds2025-07-305-39/+36
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ...
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2025-07-261-2/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge in late fixes to prepare for the 6.17 net-next PR. Conflicts: net/core/neighbour.c 1bbb76a89948 ("neighbour: Fix null-ptr-deref in neigh_flush_dev().") 13a936bb99fb ("neighbour: Protect tbl->phash_buckets[] with a dedicated mutex.") 03dc03fa0432 ("neighbor: Add NTF_EXT_VALIDATED flag for externally validated entries") Adjacent changes: drivers/net/usb/usbnet.c 0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event") 2c04d279e857 ("net: usb: Convert tasklet API to new bottom half workqueue mechanism") net/ipv6/route.c 31d7d67ba127 ("ipv6: annotate data-races around rt->fib6_nsiblings") 1caf27297215 ("ipv6: adopt dst_dev() helper") 3b3ccf9ed05e ("net: Remove unnecessary NULL check for lwtunnel_fill_encap()") Signed-off-by: Jakub Kicinski <[email protected]>
| | * igb: xsk: solve negative overflow of nb_pkts in zerocopy modeJason Xing2025-07-261-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no break time in the while() loop, so every time at the end of igb_xmit_zc(), negative overflow of nb_pkts will occur, which renders the return value always false. But theoretically, the result should be set after calling xsk_tx_peek_release_desc_batch(). We can take i40e_xmit_zc() as a good example. Returning false means we're not done with transmission and we need one more poll, which is exactly what igb_xmit_zc() always did before this patch. After this patch, the return value depends on the nb_pkts value. Two cases might happen then: 1. if (nb_pkts < budget), it means we process all the possible data, so return true and no more necessary poll will be triggered because of this. 2. if (nb_pkts == budget), it means we might have more data, so return false to let another poll run again. Fixes: f8e284a02afc ("igb: Add AF_XDP zero-copy Tx support") Signed-off-by: Jason Xing <[email protected]> Reviewed-by: Aleksandr Loktionov <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
| * | igb: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()Vladimir Oltean2025-07-033-27/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New timestamping API was introduced in commit 66f7223039c0 ("net: add NDOs for configuring hardware timestamping") from kernel v6.6. It is time to convert the Intel igb driver to the new API, so that timestamping configuration can be removed from the ndo_eth_ioctl() path completely. Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Vadim Fedorenko <[email protected]> Reviewed-by: Milena Olech <[email protected]> Tested-by: Rinitha S <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
| * | eth: igb: migrate to new RXFH callbacksJakub Kicinski2025-06-171-10/+10
| |/ | | | | | | | | | | | | | | | | | | | | | | Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool: add dedicated callbacks for getting and setting rxfh fields"). Reviewed-by: Aleksandr Loktionov <[email protected]> Reviewed-by: Joe Damato <[email protected]> Reviewed-by: Tony Nguyen <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
* / time/timecounter: Fix the lie that struct cyclecounter is constGreg Kroah-Hartman2025-07-011-2/+2
|/ | | | | | | | | | | | | | | | | | | In both the read callback for struct cyclecounter, and in struct timecounter, struct cyclecounter is declared as a const pointer. Unfortunatly, a number of users of this pointer treat it as a non-const pointer as it is burried in a larger structure that is heavily modified by the callback function when accessed. This lie had been hidden by the fact that container_of() "casts away" a const attribute of a pointer without any compiler warning happening at all. Fix this all up by removing the const attribute in the needed places so that everyone can see that the structure really isn't const, but can, and is, modified by the users of it. Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/all/2025070124-backyard-hurt-783a@gregkh
* treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar2025-06-081-2/+4
| | | | | | | | | | | Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/all/[email protected]
* igb: Get rid of spurious interruptsKurt Kanzenbach2025-04-293-5/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When running the igc with XDP/ZC in busy polling mode with deferral of hard interrupts, interrupts still happen from time to time. That is caused by the igb task watchdog which triggers Rx interrupts periodically. That mechanism has been introduced to overcome skb/memory allocation failures [1]. So the Rx clean functions stop processing the Rx ring in case of such failure. The task watchdog triggers Rx interrupts periodically in the hope that memory became available in the mean time. The current behavior is undesirable for real time applications, because the driver induced Rx interrupts trigger also the softirq processing. However, all real time packets should be processed by the application which uses the busy polling method. Therefore, only trigger the Rx interrupts in case of real allocation failures. Introduce a new flag for signaling that condition. Follow the same logic as in commit 8dcf2c212078 ("igc: Get rid of spurious interrupts"). [1] - https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=3be507547e6177e5c808544bd6a2efa2c7f1d436 Reviewed-by: Joe Damato <[email protected]> Reviewed-by: Aleksandr Loktionov <[email protected]> Tested-by: Sweta Kumari <[email protected]> Signed-off-by: Kurt Kanzenbach <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
* igb: Add support for persistent NAPI configKurt Kanzenbach2025-04-291-1/+2
| | | | | | | | | | | | | Use netif_napi_add_config() to assign persistent per-NAPI config. This is useful for preserving NAPI settings when changing queue counts or for user space programs using SO_INCOMING_NAPI_ID. Reviewed-by: Joe Damato <[email protected]> Reviewed-by: Aleksandr Loktionov <[email protected]> Tested-by: Rinitha S <[email protected]> (A Contingent worker at Intel) Signed-off-by: Kurt Kanzenbach <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
* igb: Link queues to NAPI instancesKurt Kanzenbach2025-04-292-5/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Link queues to NAPI instances via netdev-genl API. This is required to use XDP/ZC busy polling. See commit 5ef44b3cb43b ("xsk: Bring back busy polling support") for details. This also allows users to query the info with netlink: |$ ./tools/net/ynl/pyynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ | --dump queue-get --json='{"ifindex": 2}' |[{'id': 0, 'ifindex': 2, 'napi-id': 8201, 'type': 'rx'}, | {'id': 1, 'ifindex': 2, 'napi-id': 8202, 'type': 'rx'}, | {'id': 2, 'ifindex': 2, 'napi-id': 8203, 'type': 'rx'}, | {'id': 3, 'ifindex': 2, 'napi-id': 8204, 'type': 'rx'}, | {'id': 0, 'ifindex': 2, 'napi-id': 8201, 'type': 'tx'}, | {'id': 1, 'ifindex': 2, 'napi-id': 8202, 'type': 'tx'}, | {'id': 2, 'ifindex': 2, 'napi-id': 8203, 'type': 'tx'}, | {'id': 3, 'ifindex': 2, 'napi-id': 8204, 'type': 'tx'}] Add rtnl locking to PCI error handlers, because netif_queue_set_napi() requires the lock held. While at __igb_open() use RCT coding style. Signed-off-by: Kurt Kanzenbach <[email protected]> Reviewed-by: Joe Damato <[email protected]> Tested-by: Sweta Kumari <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
* igb: Link IRQs to NAPI instancesKurt Kanzenbach2025-04-291-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Link IRQs to NAPI instances via netdev-genl API. This allows users to query that information via netlink: |$ ./tools/net/ynl/pyynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ | --dump napi-get --json='{"ifindex": 2}' |[{'defer-hard-irqs': 0, | 'gro-flush-timeout': 0, | 'id': 8204, | 'ifindex': 2, | 'irq': 127, | 'irq-suspend-timeout': 0}, | {'defer-hard-irqs': 0, | 'gro-flush-timeout': 0, | 'id': 8203, | 'ifindex': 2, | 'irq': 126, | 'irq-suspend-timeout': 0}, | {'defer-hard-irqs': 0, | 'gro-flush-timeout': 0, | 'id': 8202, | 'ifindex': 2, | 'irq': 125, | 'irq-suspend-timeout': 0}, | {'defer-hard-irqs': 0, | 'gro-flush-timeout': 0, | 'id': 8201, | 'ifindex': 2, | 'irq': 124, | 'irq-suspend-timeout': 0}] |$ cat /proc/interrupts | grep enp2s0 |123: 0 1 IR-PCI-MSIX-0000:02:00.0 0-edge enp2s0 |124: 0 7 IR-PCI-MSIX-0000:02:00.0 1-edge enp2s0-TxRx-0 |125: 0 0 IR-PCI-MSIX-0000:02:00.0 2-edge enp2s0-TxRx-1 |126: 0 5 IR-PCI-MSIX-0000:02:00.0 3-edge enp2s0-TxRx-2 |127: 0 0 IR-PCI-MSIX-0000:02:00.0 4-edge enp2s0-TxRx-3 Reviewed-by: Joe Damato <[email protected]> Tested-by: Rinitha S <[email protected]> (A Contingent worker at Intel) Signed-off-by: Kurt Kanzenbach <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
* net: ptp: introduce .supported_extts_flags to ptp_clock_infoJacob Keller2025-04-161-14/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PTP_EXTTS_REQUEST(2) ioctl has a flags field which specifies how the external timestamp request should behave. This includes which edge of the signal to timestamp, as well as a specialized "offset" mode. It is expected that more flags will be added in the future. Driver authors routinely do not check the flags, often accepting requests with flags which they do not support. Even drivers which do check flags may not be future-proofed to reject flags not yet defined. Thus, any future flag additions often require manually updating drivers to reject these flags. This approach of hoping we catch flag checks during review, or playing whack-a-mole after the fact is the wrong approach. Introduce the "supported_extts_flags" field to the ptp_clock_info structure. This field defines the set of flags the device actually supports. Update the core character device logic to check this field and reject unsupported requests. Getting this right is somewhat tricky. First, to avoid unnecessary repetition and make basic functionality work when .supported_extts_flags is 0, the core always accepts the PTP_ENABLE_FEATURE flag. This flag is used to set the 'on' parameter to the .enable function and is thus always 'supported' by all drivers. For backwards compatibility, the PTP_RISING_EDGE and PTP_FALLING_EDGE flags are merely "hints" when using the old PTP_EXTTS_REQUEST ioctl, and are not expected to be enforced. If the user issues PTP_EXTTS_REQUEST2, the PTP_STRICT_FLAGS flag is added which is supposed to inform the driver to strictly validate the flags and reject unsupported requests. To handle this, first check if the driver reports PTP_STRICT_FLAGS support. If it does not, then always allow the PTP_RISING_EDGE and PTP_FALLING_EDGE flags. This keeps backwards compatibility with the original PTP_EXTTS_REQUEST ioctl where these flags are not guaranteed to be honored. This way, drivers which do not set the supported_extts_flags will continue to accept requests for the original PTP_EXTTS_REQUEST ioctl. The core will automatically reject requests with new flags, and correctly reject requests with PTP_STRICT_FLAGS, where the driver is supposed to strictly validate the flags. Update the various drivers, refactoring their validation logic into the .supported_extts_flags field. For consistency and readability, PTP_ENABLE_FEATURE is not set in the supported flags list, and PTP_EXTTS_EDGES is expanded to PTP_RISING_EDGE | PTP_FALLING_EDGE in all cases. Note the following driver files set n_ext_ts to a non-zero value but did not check flags at all: • drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.c • drivers/net/ethernet/freescale/enetc/enetc_ptp.c • drivers/net/ethernet/intel/i40e/i40e_ptp.c • drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.c • drivers/net/ethernet/renesas/ravb_ptp.c • drivers/net/ethernet/renesas/rtsn.c • drivers/net/ethernet/renesas/rtsn.h • drivers/net/ethernet/ti/am65-cpts.c • drivers/net/ethernet/ti/cpts.h • drivers/net/ethernet/ti/icssg/icss_iep.c • drivers/net/ethernet/xscale/ptp_ixp46x.c • drivers/net/phy/bcm-phy-ptp.c • drivers/ptp/ptp_ocp.c • drivers/ptp/ptp_pch.c • drivers/ptp/ptp_qoriq.c These drivers behavior does change slightly: they will now reject the PTP_EXTTS_REQUEST2 ioctl, because they do not strictly validate their flags. This also makes them no longer incorrectly accept PTP_EXT_OFFSET. Also note that the renesas ravb driver does not support PTP_STRICT_FLAGS. We could leave the .supported_extts_flags as 0, but I added the PTP_RISING_EDGE | PTP_FALLING_EDGE since the driver previously manually validated these flags. This is equivalent to 0 because the core will allow these flags regardless unless PTP_STRICT_FLAGS is also set. Signed-off-by: Jacob Keller <[email protected]> Reviewed-by: Kory Maincent <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
* treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner2025-04-051-4/+4
| | | | | | | | | | timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
* igb: reject invalid external timestamp requests for 82580-based HWJacob Keller2025-03-201-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The igb_ptp_feature_enable_82580 function correctly checks that unknown flags are not passed to the function. However, it does not actually check PTP_RISING_EDGE or PTP_FALLING_EDGE when configuring the external timestamp function. The data sheet for the 82580 product says: Upon a change in the input level of one of the SDP pins that was configured to detect Time stamp events using the TSSDP register, a time stamp of the system time is captured into one of the two auxiliary time stamp registers (AUXSTMPL/H0 or AUXSTMPL/H1). For example to define timestamping of events in the AUXSTMPL0 and AUXSTMPH0 registers, Software should: 1. Set the TSSDP.AUX0_SDP_SEL field to select the SDP pin that detects the level change and set the TSSDP.AUX0_TS_SDP_EN bit to 1. 2. Set the TSAUXC.EN_TS0 bit to 1 to enable timestamping The same paragraph is in the i350 and i354 data sheets. The wording implies that the time stamps are captured at any level change. There does not appear to be any way to only timestamp one edge of the signal. Reject requests which do not set both PTP_RISING_EDGE and PTP_FALLING_EDGE when operating under PTP_STRICT_FLAGS mode via PTP_EXTTS_REQUEST2. Fixes: 38970eac41db ("igb: support EXTTS on 82580/i354/i350") Reviewed-by: Michal Swiatkowski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-1-ea930ba82459@intel.com Signed-off-by: Paolo Abeni <[email protected]>
* igb: Fix passing 0 to ERR_PTR in igb_run_xdp()Yue Haibing2025-01-081-14/+8
| | | | | | | | | | | | | | | | igb_run_xdp() converts customed xdp action to a negative error code with the sk_buff pointer type which be checked with IS_ERR in igb_clean_rx_irq(). Remove this error pointer handing instead use plain int return value. Reviewed-by: Maciej Fijalkowski <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Yue Haibing <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Chandan Kumar Rout <[email protected]> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
* igb: Add AF_XDP zero-copy Tx supportSriram Yagnaraman2025-01-083-10/+116
| | | | | | | | | | | | | | | | | | | | | | | Add support for AF_XDP zero-copy transmit path. A new TX buffer type IGB_TYPE_XSK is introduced to indicate that the Tx frame was allocated from the xsk buff pool, so igb_clean_tx_ring() and igb_clean_tx_irq() can clean the buffers correctly based on type. igb_xmit_zc() performs the actual packet transmit when AF_XDP zero-copy is enabled. We share the TX ring between slow path, XDP and AF_XDP zero-copy, so we use the netdev queue lock to ensure mutual exclusion. Signed-off-by: Sriram Yagnaraman <[email protected]> [Kurt: Set olinfo_status in igb_xmit_zc() so that frames are transmitted, Use READ_ONCE() for xsk_pool and check Tx disabled and carrier in igb_xmit_zc(), Add FIXME for RS bit] Signed-off-by: Kurt Kanzenbach <[email protected]> Reviewed-by: Maciej Fijalkowski <[email protected]> Tested-by: George Kuruvinakunnel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
* igb: Add AF_XDP zero-copy Rx supportSriram Yagnaraman2025-01-083-19/+360
| | | | | | | | | | | | | | | | | | | | | Add support for AF_XDP zero-copy receive path. When AF_XDP zero-copy is enabled, the rx buffers are allocated from the xsk buff pool using igb_alloc_rx_buffers_zc(). Use xsk_pool_get_rx_frame_size() to set SRRCTL rx buf size when zero-copy is enabled. Signed-off-by: Sriram Yagnaraman <[email protected]> [Kurt: Port to v6.12 and provide napi_id for xdp_rxq_info_reg(), RCT, remove NETDEV_XDP_ACT_XSK_ZEROCOPY, update NTC handling, READ_ONCE() xsk_pool, likelyfy for XDP_REDIRECT case] Signed-off-by: Kurt Kanzenbach <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Tested-by: George Kuruvinakunnel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
* igb: Add XDP finalize and stats update functionsKurt Kanzenbach2025-01-082-19/+38
| | | | | | | | | | | | Move XDP finalize and Rx statistics update into separate functions. This way, they can be reused by the XDP and XDP/ZC code later. Signed-off-by: Kurt Kanzenbach <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Tested-by: George Kuruvinakunnel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
* igb: Introduce XSK data structures and helpersSriram Yagnaraman2025-01-084-2/+229
| | | | | | | | | | | | | | | | | | | | | | | | | Add the following ring flag: - IGB_RING_FLAG_TX_DISABLED (when xsk pool is being setup) Add a xdp_buff array for use with XSK receive batch API, and a pointer to xsk_pool in igb_adapter. Add enable/disable functions for TX and RX rings. Add enable/disable functions for XSK pool. Add xsk wakeup function. None of the above functionality will be active until NETDEV_XDP_ACT_XSK_ZEROCOPY is advertised in netdev->xdp_features. Signed-off-by: Sriram Yagnaraman <[email protected]> [Kurt: Add READ/WRITE_ONCE(), synchronize_net(), remove IGB_RING_FLAG_AF_XDP_ZC] Signed-off-by: Kurt Kanzenbach <[email protected]> Reviewed-by: Maciej Fijalkowski <[email protected]> Tested-by: George Kuruvinakunnel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
* igb: Introduce igb_xdp_is_enabled()Sriram Yagnaraman2025-01-082-3/+10
| | | | | | | | | | | | | | Introduce igb_xdp_is_enabled() to check if an XDP program is assigned to the device. Use that wherever xdp_prog is read and evaluated. Signed-off-by: Sriram Yagnaraman <[email protected]> [Kurt: Split patches and use READ_ONCE()] Signed-off-by: Kurt Kanzenbach <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Tested-by: George Kuruvinakunnel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
* igb: Remove static qualifiersSriram Yagnaraman2025-01-082-31/+35
| | | | | | | | | | | | | | | | | | | | | | | | Remove static qualifiers on the following functions to be able to call from XSK specific file that is added in the later patches: - igb_xdp_tx_queue_mapping() - igb_xdp_ring_update_tail() - igb_clean_tx_ring() - igb_clean_rx_ring() - igb_xdp_xmit_back() - igb_process_skb_fields() While at it, inline igb_xdp_tx_queue_mapping() and igb_xdp_ring_update_tail(). These functions are small enough and used in XDP hot paths. Signed-off-by: Sriram Yagnaraman <[email protected]> [Kurt: Split patches, inline small XDP functions] Signed-off-by: Kurt Kanzenbach <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Tested-by: George Kuruvinakunnel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
* igb: Fix potential invalid memory access in igb_init_module()Yuan Can2024-12-031-0/+4
| | | | | | | | | | | The pci_register_driver() can fail and when this happened, the dca_notifier needs to be unregistered, otherwise the dca_notifier can be called when igb fails to install, resulting to invalid memory access. Fixes: bbd98fe48a43 ("igb: Fix DCA errors and do not use context index for 82576") Signed-off-by: Yuan Can <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* Merge branch '100GbE' of ↵Jakub Kicinski2024-11-161-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-11-05 (ice, ixgbe, igc. igb, igbvf, e1000) For ice: Mateusz refactors and adds additional SerDes configuration values to be output. Przemek refactors processing of DDP and adds support for a flag field in the DDP's signature segment header. Joe Damato adds support for persistent NAPI config. Brett adjusts setting of Tx promiscuous based on unicast/multicast setting. Jake moves setting of pf->supported_rxdids to occur directly after DDP load and changes a small struct to use stack memory. Frederic Weisbecker adds WQ_UNBOUND flag to the workqueue. For ixgbe: Diomidis Spinellis removes a circular dependency. For igc: Vitaly removes an unneeded autoneg parameter. For igb: Johnny Park fixes a couple of typos. For igbvf: Wander Lairson Costa removes an unused spinlock. For e1000: Joe Damato adds RTNL lock to some calls where it is expected to be held. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: e1000: Hold RTNL when e1000_down can be called igbvf: remove unused spinlock igb: Fix 2 typos in comments in igb_main.c igc: remove autoneg parameter from igc_mac_info ixgbe: Break include dependency cycle ice: Unbind the workqueue ice: use stack variable for virtchnl_supported_rxdids ice: initialize pf->supported_rxdids immediately after loading DDP ice: only allow Tx promiscuous for multicast ice: Add support for persistent NAPI config ice: support optional flags in signature segment header ice: refactor "last" segment of DDP pkg ice: extend dump serdes equalizer values feature ice: rework of dump serdes equalizer values feature ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
| * igb: Fix 2 typos in comments in igb_main.cJohnny Park2024-11-131-2/+2
| | | | | | | | | | | | | | | | Fix 2 spelling mistakes in comments in `igb_main.c`. Signed-off-by: Johnny Park <[email protected]> Acked-by: Przemek Kitszel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
* | ndo_fdb_add: Add a parameter to report whether notification was sentPetr Machata2024-11-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently when FDB entries are added to or deleted from a VXLAN netdevice, the VXLAN driver emits one notification, including the VXLAN-specific attributes. The core however always sends a notification as well, a generic one. Thus two notifications are unnecessarily sent for these operations. A similar situation comes up with bridge driver, which also emits notifications on its own: # ip link add name vx type vxlan id 1000 dstport 4789 # bridge monitor fdb & [1] 1981693 # bridge fdb add de:ad:be:ef:13:37 dev vx self dst 192.0.2.1 de:ad:be:ef:13:37 dev vx dst 192.0.2.1 self permanent de:ad:be:ef:13:37 dev vx self permanent In order to prevent this duplicity, add a paremeter to ndo_fdb_add, bool *notified. The flag is primed to false, and if the callee sends a notification on its own, it sets it to true, thus informing the core that it should not generate another notification. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Amit Cohen <[email protected]> Reviewed-by: Nikolay Aleksandrov <[email protected]> Link: https://patch.msgid.link/cbf6ae8195e85cbf922f8058ce4eba770f3b71ed.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <[email protected]>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2024-11-141-1/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR (net-6.12-rc8). Conflicts: tools/testing/selftests/net/.gitignore 252e01e68241 ("selftests: net: add netlink-dumps to .gitignore") be43a6b23829 ("selftests: ncdevmem: Move ncdevmem under drivers/net/hw") https://lore.kernel.org/all/[email protected]/ drivers/net/phy/phylink.c 671154f174e0 ("net: phylink: ensure PHY momentary link-fails are handled") 7530ea26c810 ("net: phylink: remove "using_mac_select_pcs"") Adjacent changes: drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c 5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines") e96321fad3ad ("net: ethernet: Switch back to struct platform_driver::remove()") Signed-off-by: Jakub Kicinski <[email protected]>
| * Revert "igb: Disable threaded IRQ for igb_msix_other"Wander Lairson Costa2024-11-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 338c4d3902feb5be49bfda530a72c7ab860e2c9f. Sebastian noticed the ISR indirectly acquires spin_locks, which are sleeping locks under PREEMPT_RT, which leads to kernel splats. Fixes: 338c4d3902feb ("igb: Disable threaded IRQ for igb_msix_other") Reported-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: Wander Lairson Costa <[email protected]> Reviewed-by: Sebastian Andrzej Siewior <[email protected]> Acked-by: Przemek Kitszel <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2024-11-011-1/+1
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR (net-6.12-rc6). Conflicts: drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c cbe84e9ad5e2 ("wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd") 188a1bf89432 ("wifi: mac80211: re-order assigning channel in activate links") https://lore.kernel.org/all/[email protected]/ net/mac80211/cfg.c c4382d5ca1af ("wifi: mac80211: update the right link for tx power") 8dd0498983ee ("wifi: mac80211: Fix setting txpower with emulate_chanctx") drivers/net/ethernet/intel/ice/ice_ptp_hw.h 6e58c3310622 ("ice: fix crash on probe for DPLL enabled E810 LOM") e4291b64e118 ("ice: Align E810T GPIO to other products") ebb2693f8fbd ("ice: Read SDP section from NVM for pin definitions") ac532f4f4251 ("ice: Cleanup unused declarations") https://lore.kernel.org/all/[email protected]/ No adjacent changes. Signed-off-by: Jakub Kicinski <[email protected]>
| * igb: Disable threaded IRQ for igb_msix_otherWander Lairson Costa2024-10-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During testing of SR-IOV, Red Hat QE encountered an issue where the ip link up command intermittently fails for the igbvf interfaces when using the PREEMPT_RT variant. Investigation revealed that e1000_write_posted_mbx returns an error due to the lack of an ACK from e1000_poll_for_ack. The underlying issue arises from the fact that IRQs are threaded by default under PREEMPT_RT. While the exact hardware details are not available, it appears that the IRQ handled by igb_msix_other must be processed before e1000_poll_for_ack times out. However, e1000_write_posted_mbx is called with preemption disabled, leading to a scenario where the IRQ is serviced only after the failure of e1000_write_posted_mbx. To resolve this, we set IRQF_NO_THREAD for the affected interrupt, ensuring that the kernel handles it immediately, thereby preventing the aforementioned error. Reproducer: #!/bin/bash # echo 2 > /sys/class/net/ens14f0/device/sriov_numvfs ipaddr_vlan=3 nic_test=ens14f0 vf=${nic_test}v0 while true; do ip link set ${nic_test} mtu 1500 ip link set ${vf} mtu 1500 ip link set $vf up ip link set ${nic_test} vf 0 vlan ${ipaddr_vlan} ip addr add 172.30.${ipaddr_vlan}.1/24 dev ${vf} ip addr add 2021:db8:${ipaddr_vlan}::1/64 dev ${vf} if ! ip link show $vf | grep 'state UP'; then echo 'Error found' break fi ip link set $vf down done Signed-off-by: Wander Lairson Costa <[email protected]> Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Reported-by: Yuying Ma <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2024-10-101-0/+4
|\| | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR (net-6.12-rc3). No conflicts and no adjacent changes. Signed-off-by: Jakub Kicinski <[email protected]>
| * igb: Do not bring the device up after non-fatal errorMohamed Khalfella2024-10-081-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 004d25060c78 ("igb: Fix igb_down hung on surprise removal") changed igb_io_error_detected() to ignore non-fatal pcie errors in order to avoid hung task that can happen when igb_down() is called multiple times. This caused an issue when processing transient non-fatal errors. igb_io_resume(), which is called after igb_io_error_detected(), assumes that device is brought down by igb_io_error_detected() if the interface is up. This resulted in panic with stacktrace below. [ T3256] igb 0000:09:00.0 haeth0: igb: haeth0 NIC Link is Down [ T292] pcieport 0000:00:1c.5: AER: Uncorrected (Non-Fatal) error received: 0000:09:00.0 [ T292] igb 0000:09:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID) [ T292] igb 0000:09:00.0: device [8086:1537] error status/mask=00004000/00000000 [ T292] igb 0000:09:00.0: [14] CmpltTO [ 200.105524,009][ T292] igb 0000:09:00.0: AER: TLP Header: 00000000 00000000 00000000 00000000 [ T292] pcieport 0000:00:1c.5: AER: broadcast error_detected message [ T292] igb 0000:09:00.0: Non-correctable non-fatal error reported. [ T292] pcieport 0000:00:1c.5: AER: broadcast mmio_enabled message [ T292] pcieport 0000:00:1c.5: AER: broadcast resume message [ T292] ------------[ cut here ]------------ [ T292] kernel BUG at net/core/dev.c:6539! [ T292] invalid opcode: 0000 [#1] PREEMPT SMP [ T292] RIP: 0010:napi_enable+0x37/0x40 [ T292] Call Trace: [ T292] <TASK> [ T292] ? die+0x33/0x90 [ T292] ? do_trap+0xdc/0x110 [ T292] ? napi_enable+0x37/0x40 [ T292] ? do_error_trap+0x70/0xb0 [ T292] ? napi_enable+0x37/0x40 [ T292] ? napi_enable+0x37/0x40 [ T292] ? exc_invalid_op+0x4e/0x70 [ T292] ? napi_enable+0x37/0x40 [ T292] ? asm_exc_invalid_op+0x16/0x20 [ T292] ? napi_enable+0x37/0x40 [ T292] igb_up+0x41/0x150 [ T292] igb_io_resume+0x25/0x70 [ T292] report_resume+0x54/0x70 [ T292] ? report_frozen_detected+0x20/0x20 [ T292] pci_walk_bus+0x6c/0x90 [ T292] ? aer_print_port_info+0xa0/0xa0 [ T292] pcie_do_recovery+0x22f/0x380 [ T292] aer_process_err_devices+0x110/0x160 [ T292] aer_isr+0x1c1/0x1e0 [ T292] ? disable_irq_nosync+0x10/0x10 [ T292] irq_thread_fn+0x1a/0x60 [ T292] irq_thread+0xe3/0x1a0 [ T292] ? irq_set_affinity_notifier+0x120/0x120 [ T292] ? irq_affinity_notify+0x100/0x100 [ T292] kthread+0xe2/0x110 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork+0x2d/0x50 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork_asm+0x11/0x20 [ T292] </TASK> To fix this issue igb_io_resume() checks if the interface is running and the device is not down this means igb_io_error_detected() did not bring the device down and there is no need to bring it up. Signed-off-by: Mohamed Khalfella <[email protected]> Reviewed-by: Yuanyuan Zhong <[email protected]> Fixes: 004d25060c78 ("igb: Fix igb_down hung on surprise removal") Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* | igb: Cleanup unused declarationsYue Haibing2024-10-082-2/+0
|/ | | | | | | | | | | e1000_init_function_pointers_82575() is never implemented and used since commit 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver"). And commit 9835fd7321a6 ("igb: Add new function to read part number from EEPROM in string format") removed igb_read_part_num() implementation. Signed-off-by: Yue Haibing <[email protected]> Reviewed-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2024-09-131-4/+13
|\ | | | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR. No conflicts (sort of) and no adjacent changes. This merge reverts commit b3c9e65eb227 ("net: hsr: remove seqnr_lock") from net, as it was superseded by commit 430d67bdcb04 ("net: hsr: Use the seqnr lock for frames received via interlink port.") in net-next. Signed-off-by: Jakub Kicinski <[email protected]>
| * igb: Always call igb_xdp_ring_update_tail() under Tx lockSriram Yagnaraman2024-09-091-4/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Always call igb_xdp_ring_update_tail() under __netif_tx_lock, add a comment and lockdep assert to indicate that. This is needed to share the same TX ring between XDP, XSK and slow paths. Furthermore, the current XDP implementation is racy on tail updates. Fixes: 9cbc948b5a20 ("igb: add XDP support") Signed-off-by: Sriram Yagnaraman <[email protected]> [Kurt: Add lockdep assert and fixes tag] Signed-off-by: Kurt Kanzenbach <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Tested-by: George Kuruvinakunnel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
* | igb: Remove setting of RX software timestampGal Pressman2024-09-061-7/+1
|/ | | | | | | | | | | | The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by: Carolina Jubran <[email protected]> Reviewed-by: Rahul Rameshbabu <[email protected]> Signed-off-by: Gal Pressman <[email protected]> Reviewed-by: Tony Nguyen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
* igb: Fix not clearing TimeSync interrupts for 82580Daiwei Li2024-08-281-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 82580 NICs have a hardware bug that makes it necessary to write into the TSICR (TimeSync Interrupt Cause) register to clear it: https://lore.kernel.org/all/CDCB8BE0.1EC2C%[email protected]/ Add a conditional so only for 82580 we write into the TSICR register, so we don't risk losing events for other models. Without this change, when running ptp4l with an Intel 82580 card, I get the following output: > timed out while polling for tx timestamp increasing tx_timestamp_timeout or > increasing kworker priority may correct this issue, but a driver bug likely > causes it This goes away with this change. This (partially) reverts commit ee14cc9ea19b ("igb: Fix missing time sync events"). Fixes: ee14cc9ea19b ("igb: Fix missing time sync events") Closes: https://lore.kernel.org/intel-wired-lan/CAN0jFd1kO0MMtOh8N2Ztxn6f7vvDKp2h507sMryobkBKe=xk=w@mail.gmail.com/ Tested-by: Daiwei Li <[email protected]> Suggested-by: Vinicius Costa Gomes <[email protected]> Signed-off-by: Daiwei Li <[email protected]> Acked-by: Vinicius Costa Gomes <[email protected]> Reviewed-by: Kurt Kanzenbach <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* igb: cope with large MAX_SKB_FRAGSPaolo Abeni2024-08-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sabrina reports that the igb driver does not cope well with large MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload corruption on TX. An easy reproducer is to run ssh to connect to the machine. With MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails. This has been reported originally in https://bugzilla.redhat.com/show_bug.cgi?id=2265320 The root cause of the issue is that the driver does not take into account properly the (possibly large) shared info size when selecting the ring layout, and will try to fit two packets inside the same 4K page even when the 1st fraglist will trump over the 2nd head. Address the issue by checking if 2K buffers are insufficient. Fixes: 3948b05950fd ("net: introduce a config option to tweak MAX_SKB_FRAGS") Reported-by: Jan Tluka <[email protected]> Reported-by: Jirka Hladky <[email protected]> Reported-by: Sabrina Dubroca <[email protected]> Tested-by: Sabrina Dubroca <[email protected]> Tested-by: Corinna Vinschen <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Corinna Vinschen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
* Merge branch 'net-make-timestamping-selectable'Jakub Kicinski2024-07-151-1/+1
|\ | | | | | | | | | | | | | | First part of "net: Make timestamping selectable" from Kory Maincent. Change the driver-facing type already to lower rebasing pain. Link: https://lore.kernel.org/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
| * net: Add struct kernel_ethtool_ts_infoKory Maincent2024-07-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In prevision to add new UAPI for hwtstamp we will be limited to the struct ethtool_ts_info that is currently passed in fixed binary format through the ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code already started operating on an extensible kernel variant of that structure, similar in concept to struct kernel_hwtstamp_config vs struct hwtstamp_config. Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here we introduce the kernel-only structure in include/linux/ethtool.h. The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO. Acked-by: Shannon Nelson <[email protected]> Acked-by: Alexandra Winter <[email protected]> Signed-off-by: Kory Maincent <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
* | net: intel: Remove MODULE_AUTHORsTony Nguyen2024-07-111-1/+0
|/ | | | | | | | | | | | We are moving away from the Sourceforge email address. Rather than removing or updating the email for the affected entries, remove the MODULE_AUTHOR altogether as its usage is incorrect [1]. Link: https://lore.kernel.org/netdev/20200626115236.7f36d379@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1] Reviewed-by: Jesse Brandeburg <[email protected]> Acked-by: Alexander Lobakin <[email protected]> # libeth, libie Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
* igb: Add MII write supportJackie Jone2024-06-201-0/+4
| | | | | | | | | | | | | | To facilitate running PHY parametric tests, add support for the SIOCSMIIREG ioctl. This allows a userspace application to write to the PHY registers to enable the test modes. Signed-off-by: Jackie Jone <[email protected]> Acked-by: Jacob Keller <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
* net: intel: Use *-y instead of *-objs in MakefileAndy Shevchenko2024-06-111-3/+3
| | | | | | | | | | | | | | | | | *-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Reviewed-by: Aleksandr Loktionov <[email protected]> Reviewed-by: Alexander Lobakin <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-1-d1470cee3347@intel.com Signed-off-by: Jakub Kicinski <[email protected]>
* igb: flower: validate control flagsAsbjørn Sloth Tønnesen2024-05-081-0/+3
| | | | | | | | | | | | | | | | | This driver currently doesn't support any control flags. Use flow_rule_match_has_control_flags() to check for control flags, such as can be set through `tc flower ... ip_flags frag`. In case any control flags are masked, flow_rule_match_has_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Only compile-tested. Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet2024-05-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Simon Horman <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Reviewed-by: Jacob Keller <[email protected]> Reviewed-by: Sabrina Dubroca <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Shannon Nelson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
* igb: Remove redundant runtime resume for ethtool_opsBjorn Helgaas2024-04-081-15/+0
| | | | | | | | | | | | | | | | | | | | 749ab2cd1270 ("igb: add basic runtime PM support") added ethtool_ops.begin() and .complete(), which used pm_runtime_get_sync() to resume suspended devices before any ethtool_ops callback and allow suspend after it completed. Subsequently, f32a21376573 ("ethtool: runtime-resume netdev parent before ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path, so the device is resumed before any ethtool_ops callback even if the driver didn't supply a .begin() callback. Remove the .begin() and .complete() callbacks, which are now redundant because dev_ethtool() already resumes the device. Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Sunitha Mekala <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* net: intel: implement modern PM ops declarationsJesse Brandeburg2024-03-291-16/+10
| | | | | | | | | | | | | | | | | | | | | | | Switch the Intel networking drivers to use the new power management ops declaration formats and macros, which allows us to drop __maybe_unused, as well as a bunch of ifdef checking CONFIG_PM. This is safe to do because the compiler drops the unused functions, verified by checking for any of the power management function symbols being present in System.map for a build without CONFIG_PM. If a driver has runtime PM, define the ops with pm_ptr(), and if the driver has Simple PM, use pm_sleep_ptr(), as well as the new versions of the macros for declaring the members of the pm_ops structs. Checked with network-enabled allnoconfig, allyesconfig, allmodconfig on x64_64. Reviewed-by: Alan Brady <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Reviewed-by: Maciej Fijalkowski <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* igb: simplify pci ops declarationJesse Brandeburg2024-03-291-29/+24
| | | | | | | | | | | | | | The igb driver was pre-declaring tons of functions just so that it could have an early declaration of the pci_driver struct. Delete a bunch of the declarations and move the struct to the bottom of the file, after all the functions are declared. Reviewed-by: Alan Brady <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Reviewed-by: Maciej Fijalkowski <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2024-03-121-18/+5
|\ | | | | | | | | | | Merge in late fixes to prepare for the 6.9 net-next PR. Signed-off-by: Jakub Kicinski <[email protected]>
generated by cgit (git 2.51.2) at 2025-11-30 23:47:40 +0000