| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- LTO fix for clang when building with CONFIG_CMODEL_MEDLOW
- Fix for ACPI CPPC CSR read/write return values
- Several fixes for incorrect access widths in thread_info.cpu reads
- Fix an issue in __put_user_nocheck() that was causing the glibc
tst-socket-timestamp test to fail
- Initialize struct kexec_buf records in several kexec-related
functions, which were generating UBSAN warnings
- Two fixes for sparse warnings
* tag 'riscv-for-linus-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix sparse warning about different address spaces
riscv: Fix sparse warning in __get_user_error()
riscv: kexec: Initialize kexec_buf struct
riscv: use lw when reading int cpu in asm_per_cpu
riscv, bpf: use lw when reading int cpu in bpf_get_smp_processor_id
riscv, bpf: use lw when reading int cpu in BPF_MOV64_PERCPU_REG
riscv: uaccess: fix __put_user_nocheck for unaligned accesses
riscv: use lw when reading int cpu in new_vmalloc_check
ACPI: RISC-V: Fix FFH_CPPC_CSR error handling
riscv: Only allow LTO with CMODEL_MEDANY
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The cppc_ffh_csr_read() and cppc_ffh_csr_write() returns Linux error
code in "data->ret.error" so cpc_read_ffh() and cpc_write_ffh() must
not use sbi_err_map_linux_errno() for FFH_CPPC_CSR.
Fixes: 30f3ffbee86b ("ACPI: RISC-V: Add CPPC driver")
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Troy Mitchell <[email protected]>
Reviewed-by: Sunil V L <[email protected]>
Reviewed-by: Nutty Liu <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paul Walmsley <[email protected]>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Incorrect __BITS_PER_LONG as 64 when compiling the compat vDSO
- Unreachable PLT for ftrace_caller() in a module's .init.text
following past reworking of the module VA range selection
- Memory leak in the ACPI iort_rmr_alloc_sids() after a failed
krealloc_array()
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ftrace: fix unreachable PLT for ftrace_caller in init_module with CONFIG_DYNAMIC_FTRACE
ACPI/IORT: Fix memory leak in iort_rmr_alloc_sids()
arm64: uapi: Provide correct __BITS_PER_LONG for the compat vDSO
|
| | |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
If krealloc_array() fails in iort_rmr_alloc_sids(), the function returns
NULL but does not free the original 'sids' allocation. This results in a
memory leak since the caller overwrites the original pointer with the
NULL return value.
Fixes: 491cf4a6735a ("ACPI/IORT: Add support to retrieve IORT RMR reserved regions")
Cc: <[email protected]> # 6.0.x
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Hanjun Guo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Merge ACPI APEI fixes and an ACPI platform firmware runtime update fix
for 6.17-rc3.
* acpi-apei:
ACPI: APEI: EINJ: Fix resource leak by remove callback in .exit.text
ACPI: APEI: EINJ: fix potential NULL dereference in __einj_error_inject()
ACPI: APEI: EINJ: Check if user asked for EINJV2 injection
* acpi-pfrut:
ACPI: pfr_update: Fix the driver update version check
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The security-version-number check should be used rather
than the runtime version check for driver updates.
Otherwise, the firmware update would fail when the update binary had
a lower runtime version number than the current one.
Fixes: 0db89fa243e5 ("ACPI: Introduce Platform Firmware Runtime Update device driver")
Cc: 5.17+ <[email protected]> # 5.17+
Reported-by: "Govindarajulu, Hariganesh" <[email protected]>
Signed-off-by: Chen Yu <[email protected]>
Link: https://patch.msgid.link/[email protected]
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The .remove() callback is also used during error handling in
faux_probe(). As einj_remove() was marked with __exit it's not linked
into the kernel if the driver is built-in, potentially resulting in
resource leaks.
Also remove the comment justifying the __exit annotation which doesn't
apply any more since the driver was converted to the faux device
interface.
Fixes: 6cb9441bfe8d ("ACPI: APEI: EINJ: Transition to the faux device interface")
Signed-off-by: Uwe Kleine-König <[email protected]>
Cc: 6.16+ <[email protected]> # 6.16+
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The __einj_error_inject() function allocates memory via kmalloc()
without checking for allocation failure, which could lead to a
NULL pointer dereference.
Return -ENOMEM in case allocation fails.
Fixes: b47610296d17 ("ACPI: APEI: EINJ: Enable EINJv2 error injections")
Signed-off-by: Charles Han <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Reviewed-by: Hanjun Guo <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| |/ /
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
On an EINJV2 capable system, users may still use the old injection
interface but einj_get_parameter_address() takes the EINJV2 path to map
the parameter structure. This results in the address the user supplied
being stored to the wrong location and the BIOS injecting based on an
uninitialized field (0x0 in the reported case).
Check the version of the request when mapping the EINJ parameter
structure in BIOS reserved memory.
Fixes: 691a0f0a557b ("ACPI: APEI: EINJ: Discover EINJv2 parameters")
Reported-by: Lai, Yi1 <[email protected]>
Signed-off-by: Tony Luck <[email protected]>
Reviewed-by: Zaid Alali <[email protected]>
Reviewed-by: Hanjun Guo <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
* acpi-ec:
ACPI: EC: Relax sanity check of the ECDT ID string
* acpi-processor:
ACPI: processor: perflib: Move problematic pr->performance check
|
| | |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Commit d33bd88ac0eb ("ACPI: processor: perflib: Fix initial _PPC limit
application") added a pr->performance check that prevents the frequency
QoS request from being added when the given processor has no performance
object. Unfortunately, this causes a WARN() in freq_qos_remove_request()
to trigger on an attempt to take the given CPU offline later because the
frequency QoS object has not been added for it due to the missing
performance object.
Address this by moving the pr->performance check before calling
acpi_processor_get_platform_limit() so it only prevents a limit from
being set for the CPU if the performance object is not present. This
way, the frequency QoS request is added as it was before the above
commit and it is present all the time along with the CPU's cpufreq
policy regardless of whether or not the CPU is online.
Fixes: d33bd88ac0eb ("ACPI: processor: perflib: Fix initial _PPC limit application")
Tested-by: Rafael J. Wysocki <[email protected]>
Cc: 5.4+ <[email protected]> # 5.4+
Signed-off-by: Rafael J. Wysocki <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It turns out that the ECDT table inside the ThinkBook 14 G7 IML
contains a valid EC description but an invalid ID string
("_SB.PC00.LPCB.EC0"). Ignoring this ECDT based on the invalid
ID string prevents the kernel from detecting the built-in touchpad,
so relax the sanity check of the ID string and only reject ECDTs
with empty ID strings.
Reported-by: Ilya K <[email protected]>
Fixes: 7a0d59f6a913 ("ACPI: EC: Ignore ECDT tables with an invalid ID string")
Signed-off-by: Armin Wolf <[email protected]>
Tested-by: Ilya K <[email protected]>
Link: https://patch.msgid.link/[email protected]
Cc: 6.16+ <[email protected]> # 6.16+
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
hmat driver is only concerned when a numa node changes its memory state,
specifically when a numa node with memory comes into play for the first
time, because it will register the memory_targets belonging to that numa
node. So stop using the memory notifier and use the new numa node notifer
instead.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Oscar Salvador <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Harry Yoo <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Hyeonggon Yoo <[email protected]>
Cc: Rakie Kim <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
|
| | |\ \
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
We need the driver-core fixes that are in 6.16-rc3 into here as well
to build on top of.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The normal bin_attrs field can now handle const pointers.
This makes the _new variant unnecessary.
Switch all users back.
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-4-724bfcf05b99@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The bin_attribute argument of bin_attribute::read() is now const.
This makes the _new() callbacks unnecessary. Switch all users back.
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-3-724bfcf05b99@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
| |\ \ \ \
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update APEI (new EINJv2 error injection, assorted fixes), fix
the ACPI processor driver, update the legacy ACPI /proc interface
(multiple assorted fixes of minor issues) and several assorted ACPI
drivers (minor fixes and cleanups):
- Printing the address in acpi_ex_trace_point() is either incorrect
during early kernel boot or not really useful later when pathnames
resolve properly, so stop doing it (Mario Limonciello)
- Address several minor issues in the legacy ACPI proc interface
(Andy Shevchenko)
- Fix acpi_object union initialization in the ACPI processor driver
to avoid using memory that contains leftover data (Sebastian Ott)
- Make the ACPI processor perflib driver take the initial _PPC limit
into account as appropriate (Jiayi Li)
- Fix message formatting in the ACPI processor throttling driver and
in the ACPI PCI link driver (Colin Ian King)
- Clean up general ACPI PM domain handling (Rafael Wysocki)
- Fix iomem-related sparse warnings in the APEI EINJ driver (Zaid
Alali, Tony Luck)
- Add EINJv2 error injection support to the APEI EINJ driver (Zaid
Alali)
- Fix memory corruption in error_type_set() in the APEI EINJ driver
(Dan Carpenter)
- Fix less than zero comparison on a size_t variable in the APEI EINJ
driver (Colin Ian King)
- Fix check and iounmap of an uninitialized pointer in the APEI EINJ
driver (Colin Ian King)
- Add TAINT_MACHINE_CHECK to the GHES panic path in APEI to improve
diagnostics and post-mortem analysis (Breno Leitao)
- Update APEI reviewer records and other ACPI-related information in
MAINTAINERS as well as the contact information in the ACPI ABI
documentation (Rafael Wysocki)
- Fix the handling of synchronous uncorrected memory errors in APEI
(Shuai Xue)
- Remove an AudioDSP-related ID from the ACPI LPSS driver (Andy
Shevchenko)
- Replace sprintf()/scnprintf() with sysfs_emit() in the ACPI fan
driver and update a debug message in fan_get_state_acpi4() (Eslam
Khafagy, Abdelrahman Fekry, Sumeet Pawnikar)
- Add Intel Wildcat Lake support to the ACPI DPTF driver (Srinivas
Pandruvada)
- Add more debug information regarding failing firmware updates to
the ACPI pfr_update driver (Chen Yu)
- Reduce the verbosity of the ACPI PRM (platform runtime mechanism)
driver to avoid user confusion (Zhu Qiyu)
- Replace sprintf() with sysfs_emit() in the ACPI TAD (time and alarm
device) driver (Sukrut Heroorkar)
- Enable CONFIG_ACPI_DEBUG by default to make it easier to get ACPI
debug messages from OEM platforms (Mario Limonciello)
- Fix parent device references in ASL examples in the ACPI
documentation and fix spelling and style in the gpio-properties
documentation in firmware-guide (Andy Shevchenko)
- Fix typos in ACPI documentation and comments (Bjorn Helgaas)"
* tag 'acpi-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
ACPI: Fix typos
ACPI/PCI: Remove space before newline
ACPI: processor: throttling: Remove space before newline
ACPI: processor: perflib: Fix initial _PPC limit application
ACPI/PNP: Use my kernel.org address in MAINTAINERS and ABI docs
ACPI: TAD: Replace sprintf() with sysfs_emit()
ACPI: APEI: handle synchronous exceptions in task work
ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered
ACPI: APEI: MAINTAINERS: Update reviewers for APEI
Documentation: ACPI: Fix parent device references
ACPI: fan: Update debug message in fan_get_state_acpi4()
ACPI: PRM: Reduce unnecessary printing to avoid user confusion
ACPI: fan: Replace sprintf() with sysfs_emit()
ACPI: APEI: EINJ: Fix trigger actions
ACPI: processor: fix acpi_object initialization
ACPI: APEI: GHES: add TAINT_MACHINE_CHECK on GHES panic path
ACPI: LPSS: Remove AudioDSP related ID
Documentation: firmware-guide: gpio-properties: Spelling and style fixes
ACPI: fan: Replace sprintf()/scnprintf() with sysfs_emit() in show() functions
ACPI: PM: Set .detach in acpi_general_pm_domain definition
...
|
| | |\ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Merge an update fixing typos in ACPI documentation and comments for
6.17-rc1 (Bjorn Helgaas).
* acpi-misc:
ACPI: Fix typos
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Fix typos in documentation and comments.
Signed-off-by: Bjorn Helgaas <[email protected]>
Link: https://patch.msgid.link/20250722132653.GA2781885@bhelgaas
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | | | |
| | | \ \ \ \ | |
| | |\ \ \ \ \ \
| | | | |_|/ /
| | | |/| | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Merge an update related to ACPI debugging and ACPI documentation updates
for 6.17-rc1:
- Enable CONFIG_ACPI_DEBUG by default to make it easier to get ACPI
debug messages from OEM platforms (Mario Limonciello)
- Fix parent device references in ASL examples in the ACPI
documentation and fix spelling and style in the gpio-properties
documentation in firmware-guide (Andy Shevchenko)
* acpi-debug:
ACPI: Enable CONFIG_ACPI_DEBUG by default
* acpi-docs:
Documentation: ACPI: Fix parent device references
Documentation: firmware-guide: gpio-properties: Spelling and style fixes
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
CONFIG_ACPI_DEBUG can be helpful for getting debug messages on OEM
systems to identify a BIOS bug. It's a relatively small size increase
to turn it on by default (50kb) and that saves asking people to enable
it when an issue comes up because it wasn't in defconfig.
Enable it by default.
Signed-off-by: Mario Limonciello <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | | | | |
| | | \ \ \ \ \ | |
| | | \ \ \ \ \ | |
| | | \ \ \ \ \ | |
| | | \ \ \ \ \ | |
| | | \ \ \ \ \ | |
| | | \ \ \ \ \ | |
| | | \ \ \ \ \ | |
| | | \ \ \ \ \ | |
| | | \ \ \ \ \ | |
| | |\ \ \ \ \ \ \ \ \ \ \
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | | |
and 'acpi-tad'
Merge updates of assorted ACPI drivers for 6.17-rc1:
- Remove an AudioDSP-related ID from the ACPI LPSS driver (Andy
Shevchenko)
- Replace sprintf()/scnprintf() with sysfs_emit() in the ACPI fan
driver and update a debug message in fan_get_state_acpi4() (Eslam
Khafagy, Abdelrahman Fekry, Sumeet Pawnikar)
- Add Intel Wildcat Lake support to the ACPI DPTF driver (Srinivas
Pandruvada)
- Add more debug information regarding failing firmware updates to the
ACPI pfr_update driver (Chen Yu)
- Reduce the verbosity of the ACPI PRM (platform runtime mechanism)
driver to avoid user confusion (Zhu Qiyu)
- Replace sprintf() with sysfs_emit() in the ACPI TAD (time and alarm
device) driver (Sukrut Heroorkar)
* acpi-soc:
ACPI: LPSS: Remove AudioDSP related ID
* acpi-fan:
ACPI: fan: Update debug message in fan_get_state_acpi4()
ACPI: fan: Replace sprintf() with sysfs_emit()
ACPI: fan: Replace sprintf()/scnprintf() with sysfs_emit() in show() functions
* acpi-dptf:
ACPI: DPTF: Support for Wildcat Lake
* acpi-pfrut:
ACPI: pfr_update: Add more debug information when firmware update failed
* acpi-prm:
ACPI: PRM: Reduce unnecessary printing to avoid user confusion
* acpi-tad:
ACPI: TAD: Replace sprintf() with sysfs_emit()
|
| | | | | | | | | |_|_|_|/
| | | | | | | |/| | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | | |
Replace sprintf() in *_show() callbacks of sysfs attributes with
sysfs_emit().
While the current implementation works, sysfs_emit() helps to prevent
potential buffer overflows and aligns with kernel documentation
Documentation/filesystems/sysfs.rst.
Tested on an x86_64 system with acpi_tad built as a module:
- Inserted patched acpi_tad.ko successfully
- Verified /sys/devices/platform/ACPI000E:00/time and /caps are
accessible
- Confirmed correct output from 'cat' with no dmesg errors
Signed-off-by: Sukrut Heroorkar <[email protected]>
Link: https://patch.msgid.link/[email protected]
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | | |/ / / / /
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
Commit 088984c8d54c ("ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM
handler and context") introduced non-essential printing "Failed to find
VA for GUID: xxxx, PA: 0x0" which may confuse users to think that
something wrong is going on while it is not the case.
According to the PRM Spec Section 4.1.2 [1], both static data buffer
address and ACPI parameter buffer address may be NULL if they are not
needed, so there is no need to print out the "Failed to find VA ... "
in those cases.
Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1]
Signed-off-by: Zhu Qiyu <[email protected]>
Link: https://patch.msgid.link/[email protected]
[ rjw: Edits in new comments, subject and changelog ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | | |_|/ / /
| | | | | |/| | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Users reported insufficient error information for debugging during
firmware update failures on certain platforms. Add verbose error logs
in the error code path to enhance debuggability.
Reported-by: "Govindarajulu, Hariganesh" <[email protected]>
Signed-off-by: Chen Yu <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | |_|/ / /
| | | | |/| | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
Add Wildcat Lake ACPI IDs for DPTF.
Signed-off-by: Srinivas Pandruvada <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
Update invalid control value returned debug print with
appropriate message as no matching fps control value
for checking fan fps count condition.
Signed-off-by: Sumeet Pawnikar <[email protected]>
Link: https://patch.msgid.link/[email protected]>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
Replace sprintf() with sysfs_emit() in function show_fine_grain_control()
in according to Documentation/filesystems/sysfs.rst.
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Eslam Khafagy <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | |/ / / /
| | | |/| | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
Update two sysfs show() functions in the ACPI fan driver to use sysfs_emit()
and sysfs_emit_at() instead of sprintf() and scnprintf().
- show_fan_speed(): replaced sprintf() with sysfs_emit().
- show_state(): replaced scnprintf() with sysfs_emit() for the first
write, and retained sysfs_emit_at() for incremental writes.
This change is in accordance with Documentation/filesystems/sysfs.rst,
which recommends using sysfs_emit/sysfs_emit_at in all sysfs show()
callbacks for buffer safety, clarity, and consistency.
Signed-off-by: Abdelrahman Fekry <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | |/ / / / /
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
The AudioDSP drivers are in control for all functions of the hardware
they have (they are multi-functional devices). The LPSS driver prepares
for enumeration only single devices, such as DMA, UART, SPI, I²C. Hence
the registration of AudioDSP should not be covered. Moreover, the very
same ACPI _HID has been added by the catpt driver a few years ago.
And even more serious issue with this, is that the register window at
offset 0x800 is actually D-SRAM0 in case of AudioDSP and writing to it
is a data corruption.
That all being said, remove the AudioDSP ID from the LPSS driver,
where it doesn't belong to.
Fixes: c2f8783fa2d0 ("ASoC: Intel: Add common SST driver loader on ACPI systems")
Reviewed-by: Cezary Rojewski <[email protected]>
Tested-by: Cezary Rojewski <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | |\ \ \ \ \ \
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
Merge ACPI APEI updates for 6.17-rc1:
- Fix iomem-related sparse warnings in the APEI EINJ driver (Zaid
Alali, Tony Luck)
- Add EINJv2 error injection support to the APEI EINJ driver (Zaid
Alali)
- Fix memory corruption in error_type_set() in the APEI EINJ driver (Dan
Carpenter)
- Fix less than zero comparison on a size_t variable in the APEI EINJ
driver (Colin Ian King)
- Fix check and iounmap of an uninitialized pointer in the APEI EINJ
driver (Colin Ian King)
- Add TAINT_MACHINE_CHECK to the GHES panic path in APEI to improve
diagnostics and post-mortem analysis (Breno Leitao)
- Update APEI reviewer records in MAINTAINERS (Rafael Wysocki)
- Fix the handling of synchronous uncorrected memory errors in APEI
(Shuai Xue)
* acpi-apei:
ACPI: APEI: handle synchronous exceptions in task work
ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered
ACPI: APEI: MAINTAINERS: Update reviewers for APEI
ACPI: APEI: EINJ: Fix trigger actions
ACPI: APEI: GHES: add TAINT_MACHINE_CHECK on GHES panic path
ACPI: APEI: EINJ: Fix check and iounmap of uninitialized pointer p
ACPI: APEI: EINJ: Fix less than zero comparison on a size_t variable
ACPI: APEI: EINJ: prevent memory corruption in error_type_set()
ACPI: APEI: EINJ: Update the documentation for EINJv2 support
ACPI: APEI: EINJ: Enable EINJv2 error injections
ACPI: APEI: EINJ: Create debugfs files to enter device id and syndrome
ACPI: APEI: EINJ: Discover EINJv2 parameters
ACPI: APEI: EINJ: Add einjv2 extension struct
ACPI: APEI: EINJ: Enable the discovery of EINJv2 capabilities
ACPI: APEI: EINJ: Fix kernel test sparse warnings
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
The memory uncorrected error could be signaled by asynchronous interrupt
(specifically, SPI in arm64 platform), e.g. when an error is detected by
a background scrubber, or signaled by synchronous exception
(specifically, data abort exception in arm64 platform), e.g. when a CPU
tries to access a poisoned cache line. Currently, both synchronous and
asynchronous errors use memory_failure_queue() to schedule
memory_failure() to exectute in a kworker context.
As a result, when a user-space process is accessing a poisoned data, a
data abort is taken and the memory_failure() is executed in the kworker
context, which:
- will send wrong si_code by SIGBUS signal in early_kill mode, and
- can not kill the user-space in some cases resulting a synchronous
error infinite loop
Issue 1: send wrong si_code in early_kill mode
Since commit a70297d22132 ("ACPI: APEI: set memory failure flags as
MF_ACTION_REQUIRED on synchronous events")', the flag MF_ACTION_REQUIRED
could be used to determine whether a synchronous exception occurs on
ARM64 platform. When a synchronous exception is detected, the kernel is
expected to terminate the current process which has accessed a poisoned
page. This is done by sending a SIGBUS signal with error code
BUS_MCEERR_AR, indicating an action-required machine check error on
read.
However, when kill_proc() is called to terminate the processes who has
the poisoned page mapped, it sends the incorrect SIGBUS error code
BUS_MCEERR_AO because the context in which it operates is not the one
where the error was triggered.
To reproduce this problem:
#sysctl -w vm.memory_failure_early_kill=1
vm.memory_failure_early_kill = 1
# STEP2: inject an UCE error and consume it to trigger a synchronous error
#einj_mem_uc single
0: single vaddr = 0xffffb0d75400 paddr = 4092d55b400
injecting ...
triggering ...
signal 7 code 5 addr 0xffffb0d75000
page not present
Test passed
The si_code (code 5) from einj_mem_uc indicates that it is BUS_MCEERR_AO
error and it is not factually correct.
After this change:
# STEP1: enable early kill mode
#sysctl -w vm.memory_failure_early_kill=1
vm.memory_failure_early_kill = 1
# STEP2: inject an UCE error and consume it to trigger a synchronous error
#einj_mem_uc single
0: single vaddr = 0xffffb0d75400 paddr = 4092d55b400
injecting ...
triggering ...
signal 7 code 4 addr 0xffffb0d75000
page not present
Test passed
The si_code (code 4) from einj_mem_uc indicates that it is a BUS_MCEERR_AR
error as expected.
Issue 2: a synchronous error infinite loop
If a user-space process, e.g. devmem, accesses a poisoned page for which
the HWPoison flag is set, kill_accessing_process() is called to send
SIGBUS to current processs with error info. Since the memory_failure()
is executed in the kworker context, it will just do nothing but return
EFAULT. So, devmem will access the posioned page and trigger an
exception again, resulting in a synchronous error infinite loop. Such
exception loop may cause platform firmware to exceed some threshold and
reboot when Linux could have recovered from this error.
To reproduce this problem:
# STEP 1: inject an UCE error, and kernel will set HWPosion flag for related page
#einj_mem_uc single
0: single vaddr = 0xffffb0d75400 paddr = 4092d55b400
injecting ...
triggering ...
signal 7 code 4 addr 0xffffb0d75000
page not present
Test passed
# STEP 2: access the same page and it will trigger a synchronous error infinite loop
devmem 0x4092d55b400
To fix above two issues, queue memory_failure() as a task_work so that
it runs in the context of the process that is actually consuming the
poisoned data.
Signed-off-by: Shuai Xue <[email protected]>
Tested-by: Ma Wupeng <[email protected]>
Reviewed-by: Kefeng Wang <[email protected]>
Reviewed-by: Xiaofei Tan <[email protected]>
Reviewed-by: Baolin Wang <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Jane Chu <[email protected]>
Reviewed-by: Yazen Ghannam <[email protected]>
Reviewed-by: Hanjun Guo <[email protected]>
Link: https://patch.msgid.link/[email protected]
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
recovered
If a synchronous error is detected as a result of user-space process
triggering a 2-bit uncorrected error, the CPU will take a synchronous
error exception such as Synchronous External Abort (SEA) on Arm64. The
kernel will queue a memory_failure() work which poisons the related
page, unmaps the page, and then sends a SIGBUS to the process, so that
a system wide panic can be avoided.
However, no memory_failure() work will be queued when abnormal
synchronous errors occur. These errors can include situations like
invalid PA, unexpected severity, no memory failure config support,
invalid GUID section, etc. In such a case, the user-space process will
trigger SEA again. This loop can potentially exceed the platform
firmware threshold or even trigger a kernel hard lockup, leading to a
system reboot.
Fix it by performing a force kill if no memory_failure() work is queued
for synchronous errors.
Signed-off-by: Shuai Xue <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Yazen Ghannam <[email protected]>
Reviewed-by: Jane Chu <[email protected]>
Reviewed-by: Hanjun Guo <[email protected]>
Link: https://patch.msgid.link/[email protected]
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
The trigger events are in BIOS memory immediately following the
acpi_einj_trigger structure. These were not copied to regular
kernel memory for use by apei_exec_ctx_init() so injections in
"notrigger=0" mode failed with a message like this:
APEI: Invalid action table, unknown instruction type: 123
Fix by allocating a "table_size" block of memory and copying the whole
table for use in the rest of the trigger flow.
Fixes: 1a35c88302a3 ("ACPI: APEI: EINJ: Fix kernel test sparse warnings")
Reported-by: Yi1 Lai <[email protected]>
Signed-off-by: Tony Luck <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
When a GHES (Generic Hardware Error Source) triggers a panic, add the
TAINT_MACHINE_CHECK taint flag to the kernel. This explicitly marks the
kernel as tainted due to a machine check event, improving diagnostics
and post-mortem analysis. The taint is set with LOCKDEP_STILL_OK to
indicate lockdep remains valid.
At large scale deployment, this helps to quickly determine panics that
are coming due to hardware failures.
Signed-off-by: Breno Leitao <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
In the case where a request_mem_region call fails and pointer r is null
the error exit path via label 'out' will check for a non-null pointer
p and try to iounmap it. However, pointer p has not been assigned a
value at this point, so it may potentially contain any garbage value.
Fix this by ensuring pointer p is initialized to NULL.
Fixes: 1a35c88302a3 ("ACPI: APEI: EINJ: Fix kernel test sparse warnings")
Signed-off-by: Colin Ian King <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
The check for c < 0 is always false because variable c is a size_t which
is not a signed type. Fix this by making c a ssize_t.
Fixes: 90711f7bdf76 ("ACPI: APEI: EINJ: Create debugfs files to enter device id and syndrome")
Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
The "einj_buf" buffer is 32 chars. If "count" is larger than that it
results in memory corruption. Cap it at 31 so that we leave the last
character as a NUL terminator. By the way, the highest reasonable value
for "count" is 24.
Fixes: 0c6176e1e186 ("ACPI: APEI: EINJ: Enable the discovery of EINJv2 capabilities")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
Enable injection using EINJv2 mode of operation.
[Tony: Mostly Zaid's original code. I just changed how the error ID
and syndrome bits are implemented. Also swapped out some camelcase
variable names]
Co-developed-by: Tony Luck <[email protected]>
Signed-off-by: Tony Luck <[email protected]>
Signed-off-by: Zaid Alali <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
EINJv2 allows users to inject multiple errors at the same time by
specifying the device id and syndrome bits for each error in a flex
array.
Create files in the einj debugfs directory to enter data for each
device id and syndrome value. Note that the specification says these
are 128-bit little-endian values. Linux doesn't have a handy helper
to manage objects of this type.
Signed-off-by: Tony Luck <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Signed-off-by: Zaid Alali <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
The EINJv2 set_error_type_with_address structure has a flex array
to hold the component IDs and syndrome values used when injecting
multiple errors at once.
Discover the size of this array by taking the address from the
ACPI_EINJ_SET_ERROR_TYPE_WITH_ADDRESS entry in the EINJ table
and reading the BIOS copy of the structure.
Derive the maximum number of components from the length field
in the einjv2_extension_struct at the end of the BIOS copy.
Map the whole of the structure into kernel memory (and unmap
on module unload).
[Tony: Code unchanged from Zaid's original. New commit message]
Reviewed-by: Tony Luck <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Signed-off-by: Zaid Alali <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
Add einjv2 extension struct and EINJv2 error types to prepare
the driver for EINJv2 support. ACPI specifications[1] enables
EINJv2 by extending set_error_type_with_address struct.
Link: https://uefi.org/specs/ACPI/6.6/18_Platform_Error_Interfaces.html#einjv2-extension-structure [1]
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Signed-off-by: Zaid Alali <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
Enable the driver to show all supported error injections for EINJ
and EINJv2 at the same time. EINJv2 capabilities can be discovered
by checking the return value of get_error_type, where bit 30 set
indicates EINJv2 support.
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Signed-off-by: Zaid Alali <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | |/ / / /
| | |/| | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
This patch fixes the kernel test robot warning reported here:
Link: https://lore.kernel.org/all/[email protected]/
Use pointers annotated with the __iomem marker for all iomem map calls,
and creates a local copy of the mapped IO memory for future access in
the code. memcpy_fromio() and memcpy_toio() are used to read/write data
from/to mapped IO memory.
Reviewed-by: Ira Weiny <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Signed-off-by: Zaid Alali <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | | | | |
| | | \ \ \ \ \ | |
| | | \ \ \ \ \ | |
| | | \ \ \ \ \ | |
| | | \ \ \ \ \ | |
| | | \ \ \ \ \ | |
| | |\ \ \ \ \ \ \ \ \
| | |_|_|_|_|_|_|/ /
| |/| | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Merge an ACPICA update, ACPI proc interface updates, ACPI processor
driver updates, and ACPI power management updates for 6.17-rc1:
- Printing the address in acpi_ex_trace_point() is either incorrect
during early kernel boot or not really useful later when pathnames
resolve properly, so stop doing it (Mario Limonciello)
- Address several minor issues in the legacy ACPI proc interface (Andy
Shevchenko)
- Fix acpi_object union initialization in the ACPI processor driver to
avoid using memory that contains leftover data (Sebastian Ott).
- Make the ACPI processor perflib driver take the initial _PPC limit
into account as appropriate (Jiayi Li).
- Fix message formatting in the ACPI processor throttling driver (Colin
Ian King).
- Clean up general ACPI PM domain handling (Rafael Wysocki)
* acpica:
ACPICA: Decrease `AcpiExTracePoint` verbosity
* acpi-proc:
ACPI: proc: Prefer to use octal permission
ACPI: proc: Use str_enabled_disabled() helper
ACPI: proc: Remove unused header
ACPI: proc: Use correct format specifier and drop casting
ACPI: wakeup: Drop unneeded casting for sleep_state
* acpi-processor:
ACPI: processor: throttling: Remove space before newline
ACPI: processor: perflib: Fix initial _PPC limit application
ACPI: processor: fix acpi_object initialization
* acpi-pm:
ACPI: PM: Set .detach in acpi_general_pm_domain definition
|
| | | | | | | |/ / /
| | | | | |/| | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
Instead of setting the .detach callback pointer for acpi_general_pm_domain
every time it is attached to a device, which is confusing, set it once
in the definition of acpi_general_pm_domain.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Mika Westerberg <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
There is a extraneous space before a newline in a pr_warn message.
Remove it.
Signed-off-by: Colin Ian King <[email protected]>
Link: https://patch.msgid.link/[email protected]
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
If the BIOS sets a _PPC frequency limit upfront, it will fail to take
effect due to a call ordering issue. Namely, freq_qos_update_request()
is called before freq_qos_add_request() for the given request causing
the constraint update to be ignored. The call sequence in question is
as follows:
cpufreq_policy_online()
acpi_cpufreq_cpu_init()
acpi_processor_register_performance()
acpi_processor_get_performance_info()
acpi_processor_get_platform_limit()
freq_qos_update_request(&perflib_req) <- inactive QoS request
blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
CPUFREQ_CREATE_POLICY)
acpi_processor_notifier()
acpi_processor_ppc_init()
freq_qos_add_request(&perflib_req) <- QoS request activation
Address this by adding an acpi_processor_get_platform_limit() call
to acpi_processor_ppc_init(), after the perflib_req activation via
freq_qos_add_request(), which causes the initial _PPC limit to be
picked up as appropriate. However, also ensure that the _PPC limit
will not be picked up in the cases when the cpufreq driver does not
call acpi_processor_register_performance() by adding a pr->performance
check to the related_cpus loop in acpi_processor_ppc_init().
Fixes: d15ce412737a ("ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier")
Signed-off-by: Jiayi Li <[email protected]>
Link: https://patch.msgid.link/[email protected]
[ rjw: Consolidate pr-related checks in acpi_processor_ppc_init() ]
[ rjw: Subject and changelog adjustments ]
Cc: 5.4+ <[email protected]> # 5.4+: 2d8b39a62a5d ACPI: processor: Avoid NULL pointer dereferences at init time
Cc: 5.4+ <[email protected]> # 5.4+: 3000ce3c52f8 cpufreq: Use per-policy frequency QoS
Cc: 5.4+ <[email protected]> # 5.4+: a1bb46c36ce3 ACPI: processor: Add QoS requests for all CPUs
Cc: 5.4+ <[email protected]> # 5.4+
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
