aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa')
-rw-r--r--drivers/net/dsa/b53/b53_common.c36
-rw-r--r--drivers/net/dsa/b53/b53_regs.h3
-rw-r--r--drivers/net/dsa/dsa_loop.c9
-rw-r--r--drivers/net/dsa/microchip/ksz9477.c98
-rw-r--r--drivers/net/dsa/microchip/ksz9477_reg.h3
-rw-r--r--drivers/net/dsa/microchip/ksz_common.c49
-rw-r--r--drivers/net/dsa/microchip/ksz_common.h2
-rw-r--r--drivers/net/dsa/ocelot/felix.c4
-rw-r--r--drivers/net/dsa/ocelot/felix.h3
-rw-r--r--drivers/net/dsa/ocelot/felix_vsc9959.c3
10 files changed, 177 insertions, 33 deletions
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 2f846381d5a7..eb767edc4c13 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -371,11 +371,11 @@ static void b53_set_forwarding(struct b53_device *dev, int enable)
* frames should be flooded or not.
*/
b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt);
- mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IPMC_FWD_EN;
+ mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IP_MC;
b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
} else {
b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt);
- mgmt |= B53_IP_MCAST_25;
+ mgmt |= B53_IP_MC;
b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
}
}
@@ -1372,6 +1372,10 @@ static void b53_force_port_config(struct b53_device *dev, int port,
else
reg &= ~PORT_OVERRIDE_FULL_DUPLEX;
+ reg &= ~(0x3 << GMII_PO_SPEED_S);
+ if (is5301x(dev) || is58xx(dev))
+ reg &= ~PORT_OVERRIDE_SPEED_2000M;
+
switch (speed) {
case 2000:
reg |= PORT_OVERRIDE_SPEED_2000M;
@@ -1390,6 +1394,11 @@ static void b53_force_port_config(struct b53_device *dev, int port,
return;
}
+ if (is5325(dev))
+ reg &= ~PORT_OVERRIDE_LP_FLOW_25;
+ else
+ reg &= ~(PORT_OVERRIDE_RX_FLOW | PORT_OVERRIDE_TX_FLOW);
+
if (rx_pause) {
if (is5325(dev))
reg |= PORT_OVERRIDE_LP_FLOW_25;
@@ -1593,8 +1602,11 @@ static void b53_phylink_mac_link_down(struct phylink_config *config,
struct b53_device *dev = dp->ds->priv;
int port = dp->index;
- if (mode == MLO_AN_PHY)
+ if (mode == MLO_AN_PHY) {
+ if (is63xx(dev) && in_range(port, B53_63XX_RGMII0, 4))
+ b53_force_link(dev, port, false);
return;
+ }
if (mode == MLO_AN_FIXED) {
b53_force_link(dev, port, false);
@@ -1622,6 +1634,13 @@ static void b53_phylink_mac_link_up(struct phylink_config *config,
if (mode == MLO_AN_PHY) {
/* Re-negotiate EEE if it was enabled already */
p->eee_enabled = b53_eee_init(ds, port, phydev);
+
+ if (is63xx(dev) && in_range(port, B53_63XX_RGMII0, 4)) {
+ b53_force_port_config(dev, port, speed, duplex,
+ tx_pause, rx_pause);
+ b53_force_link(dev, port, true);
+ }
+
return;
}
@@ -2018,7 +2037,7 @@ static int b53_arl_search_wait(struct b53_device *dev)
do {
b53_read8(dev, B53_ARLIO_PAGE, offset, &reg);
if (!(reg & ARL_SRCH_STDN))
- return 0;
+ return -ENOENT;
if (reg & ARL_SRCH_VLID)
return 0;
@@ -2068,13 +2087,16 @@ static int b53_fdb_copy(int port, const struct b53_arl_entry *ent,
int b53_fdb_dump(struct dsa_switch *ds, int port,
dsa_fdb_dump_cb_t *cb, void *data)
{
+ unsigned int count = 0, results_per_hit = 1;
struct b53_device *priv = ds->priv;
struct b53_arl_entry results[2];
- unsigned int count = 0;
u8 offset;
int ret;
u8 reg;
+ if (priv->num_arl_bins > 2)
+ results_per_hit = 2;
+
mutex_lock(&priv->arl_mutex);
if (is5325(priv) || is5365(priv))
@@ -2096,7 +2118,7 @@ int b53_fdb_dump(struct dsa_switch *ds, int port,
if (ret)
break;
- if (priv->num_arl_bins > 2) {
+ if (results_per_hit == 2) {
b53_arl_search_rd(priv, 1, &results[1]);
ret = b53_fdb_copy(port, &results[1], cb, data);
if (ret)
@@ -2106,7 +2128,7 @@ int b53_fdb_dump(struct dsa_switch *ds, int port,
break;
}
- } while (count++ < b53_max_arl_entries(priv) / 2);
+ } while (count++ < b53_max_arl_entries(priv) / results_per_hit);
mutex_unlock(&priv->arl_mutex);
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index 309fe0e46dad..8ce1ce72e938 100644
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -111,8 +111,7 @@
/* IP Multicast control (8 bit) */
#define B53_IP_MULTICAST_CTRL 0x21
-#define B53_IP_MCAST_25 BIT(0)
-#define B53_IPMC_FWD_EN BIT(1)
+#define B53_IP_MC BIT(0)
#define B53_UC_FWD_EN BIT(6)
#define B53_MC_FWD_EN BIT(7)
diff --git a/drivers/net/dsa/dsa_loop.c b/drivers/net/dsa/dsa_loop.c
index d8a35f25a4c8..ad907287a853 100644
--- a/drivers/net/dsa/dsa_loop.c
+++ b/drivers/net/dsa/dsa_loop.c
@@ -386,13 +386,10 @@ static struct mdio_driver dsa_loop_drv = {
static void dsa_loop_phydevs_unregister(void)
{
- unsigned int i;
-
- for (i = 0; i < NUM_FIXED_PHYS; i++)
- if (!IS_ERR(phydevs[i])) {
+ for (int i = 0; i < NUM_FIXED_PHYS; i++) {
+ if (!IS_ERR(phydevs[i]))
fixed_phy_unregister(phydevs[i]);
- phy_device_free(phydevs[i]);
- }
+ }
}
static int __init dsa_loop_init(void)
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index d747ea1c41a7..5df8f153d511 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -1355,9 +1355,15 @@ void ksz9477_config_cpu_port(struct dsa_switch *ds)
}
}
+#define RESV_MCAST_CNT 8
+
+static u8 reserved_mcast_map[RESV_MCAST_CNT] = { 0, 1, 3, 16, 32, 33, 2, 17 };
+
int ksz9477_enable_stp_addr(struct ksz_device *dev)
{
+ u8 i, ports, update;
const u32 *masks;
+ bool override;
u32 data;
int ret;
@@ -1366,23 +1372,87 @@ int ksz9477_enable_stp_addr(struct ksz_device *dev)
/* Enable Reserved multicast table */
ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_RESV_MCAST_ENABLE, true);
- /* Set the Override bit for forwarding BPDU packet to CPU */
- ret = ksz_write32(dev, REG_SW_ALU_VAL_B,
- ALU_V_OVERRIDE | BIT(dev->cpu_port));
- if (ret < 0)
- return ret;
+ /* The reserved multicast address table has 8 entries. Each entry has
+ * a default value of which port to forward. It is assumed the host
+ * port is the last port in most of the switches, but that is not the
+ * case for KSZ9477 or maybe KSZ9897. For LAN937X family the default
+ * port is port 5, the first RGMII port. It is okay for LAN9370, a
+ * 5-port switch, but may not be correct for the other 8-port
+ * versions. It is necessary to update the whole table to forward to
+ * the right ports.
+ * Furthermore PTP messages can use a reserved multicast address and
+ * the host will not receive them if this table is not correct.
+ */
+ for (i = 0; i < RESV_MCAST_CNT; i++) {
+ data = reserved_mcast_map[i] <<
+ dev->info->shifts[ALU_STAT_INDEX];
+ data |= ALU_STAT_START |
+ masks[ALU_STAT_DIRECT] |
+ masks[ALU_RESV_MCAST_ADDR] |
+ masks[ALU_STAT_READ];
+ ret = ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+ if (ret < 0)
+ return ret;
- data = ALU_STAT_START | ALU_RESV_MCAST_ADDR | masks[ALU_STAT_WRITE];
+ /* wait to be finished */
+ ret = ksz9477_wait_alu_sta_ready(dev);
+ if (ret < 0)
+ return ret;
- ret = ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
- if (ret < 0)
- return ret;
+ ret = ksz_read32(dev, REG_SW_ALU_VAL_B, &data);
+ if (ret < 0)
+ return ret;
- /* wait to be finished */
- ret = ksz9477_wait_alu_sta_ready(dev);
- if (ret < 0) {
- dev_err(dev->dev, "Failed to update Reserved Multicast table\n");
- return ret;
+ override = false;
+ ports = data & dev->port_mask;
+ switch (i) {
+ case 0:
+ case 6:
+ /* Change the host port. */
+ update = BIT(dev->cpu_port);
+ override = true;
+ break;
+ case 2:
+ /* Change the host port. */
+ update = BIT(dev->cpu_port);
+ break;
+ case 4:
+ case 5:
+ case 7:
+ /* Skip the host port. */
+ update = dev->port_mask & ~BIT(dev->cpu_port);
+ break;
+ default:
+ update = ports;
+ break;
+ }
+ if (update != ports || override) {
+ data &= ~dev->port_mask;
+ data |= update;
+ /* Set Override bit to receive frame even when port is
+ * closed.
+ */
+ if (override)
+ data |= ALU_V_OVERRIDE;
+ ret = ksz_write32(dev, REG_SW_ALU_VAL_B, data);
+ if (ret < 0)
+ return ret;
+
+ data = reserved_mcast_map[i] <<
+ dev->info->shifts[ALU_STAT_INDEX];
+ data |= ALU_STAT_START |
+ masks[ALU_STAT_DIRECT] |
+ masks[ALU_RESV_MCAST_ADDR] |
+ masks[ALU_STAT_WRITE];
+ ret = ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+ if (ret < 0)
+ return ret;
+
+ /* wait to be finished */
+ ret = ksz9477_wait_alu_sta_ready(dev);
+ if (ret < 0)
+ return ret;
+ }
}
return 0;
diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h
index ff579920078e..61ea11e3338e 100644
--- a/drivers/net/dsa/microchip/ksz9477_reg.h
+++ b/drivers/net/dsa/microchip/ksz9477_reg.h
@@ -2,7 +2,7 @@
/*
* Microchip KSZ9477 register definitions
*
- * Copyright (C) 2017-2024 Microchip Technology Inc.
+ * Copyright (C) 2017-2025 Microchip Technology Inc.
*/
#ifndef __KSZ9477_REGS_H
@@ -397,7 +397,6 @@
#define ALU_RESV_MCAST_INDEX_M (BIT(6) - 1)
#define ALU_STAT_START BIT(7)
-#define ALU_RESV_MCAST_ADDR BIT(1)
#define REG_SW_ALU_VAL_A 0x0420
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 9568cc391fe3..933ae8dc6337 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -23,6 +23,7 @@
#include <linux/of_mdio.h>
#include <linux/of_net.h>
#include <linux/micrel_phy.h>
+#include <linux/pinctrl/consumer.h>
#include <net/dsa.h>
#include <net/ieee8021q.h>
#include <net/pkt_cls.h>
@@ -807,6 +808,8 @@ static const u16 ksz9477_regs[] = {
static const u32 ksz9477_masks[] = {
[ALU_STAT_WRITE] = 0,
[ALU_STAT_READ] = 1,
+ [ALU_STAT_DIRECT] = 0,
+ [ALU_RESV_MCAST_ADDR] = BIT(1),
[P_MII_TX_FLOW_CTRL] = BIT(5),
[P_MII_RX_FLOW_CTRL] = BIT(3),
};
@@ -834,6 +837,8 @@ static const u8 ksz9477_xmii_ctrl1[] = {
static const u32 lan937x_masks[] = {
[ALU_STAT_WRITE] = 1,
[ALU_STAT_READ] = 2,
+ [ALU_STAT_DIRECT] = BIT(3),
+ [ALU_RESV_MCAST_ADDR] = BIT(2),
[P_MII_TX_FLOW_CTRL] = BIT(5),
[P_MII_RX_FLOW_CTRL] = BIT(3),
};
@@ -5345,6 +5350,38 @@ static int ksz_parse_drive_strength(struct ksz_device *dev)
return 0;
}
+static int ksz8463_configure_straps_spi(struct ksz_device *dev)
+{
+ struct pinctrl *pinctrl;
+ struct gpio_desc *rxd0;
+ struct gpio_desc *rxd1;
+
+ rxd0 = devm_gpiod_get_index_optional(dev->dev, "straps-rxd", 0, GPIOD_OUT_LOW);
+ if (IS_ERR(rxd0))
+ return PTR_ERR(rxd0);
+
+ rxd1 = devm_gpiod_get_index_optional(dev->dev, "straps-rxd", 1, GPIOD_OUT_HIGH);
+ if (IS_ERR(rxd1))
+ return PTR_ERR(rxd1);
+
+ if (!rxd0 && !rxd1)
+ return 0;
+
+ if ((rxd0 && !rxd1) || (rxd1 && !rxd0))
+ return -EINVAL;
+
+ pinctrl = devm_pinctrl_get_select(dev->dev, "reset");
+ if (IS_ERR(pinctrl))
+ return PTR_ERR(pinctrl);
+
+ return 0;
+}
+
+static int ksz8463_release_straps_spi(struct ksz_device *dev)
+{
+ return pinctrl_select_default_state(dev->dev);
+}
+
int ksz_switch_register(struct ksz_device *dev)
{
const struct ksz_chip_data *info;
@@ -5360,10 +5397,22 @@ int ksz_switch_register(struct ksz_device *dev)
return PTR_ERR(dev->reset_gpio);
if (dev->reset_gpio) {
+ if (of_device_is_compatible(dev->dev->of_node, "microchip,ksz8463")) {
+ ret = ksz8463_configure_straps_spi(dev);
+ if (ret)
+ return ret;
+ }
+
gpiod_set_value_cansleep(dev->reset_gpio, 1);
usleep_range(10000, 12000);
gpiod_set_value_cansleep(dev->reset_gpio, 0);
msleep(100);
+
+ if (of_device_is_compatible(dev->dev->of_node, "microchip,ksz8463")) {
+ ret = ksz8463_release_straps_spi(dev);
+ if (ret)
+ return ret;
+ }
}
mutex_init(&dev->dev_mutex);
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index a1eb39771bb9..c65188cd3c0a 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -294,6 +294,8 @@ enum ksz_masks {
DYNAMIC_MAC_TABLE_TIMESTAMP,
ALU_STAT_WRITE,
ALU_STAT_READ,
+ ALU_STAT_DIRECT,
+ ALU_RESV_MCAST_ADDR,
P_MII_TX_FLOW_CTRL,
P_MII_RX_FLOW_CTRL,
};
diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index 2dd4e56e1cf1..20ab558fde24 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -1153,6 +1153,9 @@ static void felix_phylink_get_caps(struct dsa_switch *ds, int port,
__set_bit(ocelot->ports[port]->phy_mode,
config->supported_interfaces);
+ if (ocelot->ports[port]->phy_mode == PHY_INTERFACE_MODE_USXGMII)
+ __set_bit(PHY_INTERFACE_MODE_10G_QXGMII,
+ config->supported_interfaces);
}
static void felix_phylink_mac_config(struct phylink_config *config,
@@ -1359,6 +1362,7 @@ static const u32 felix_phy_match_table[PHY_INTERFACE_MODE_MAX] = {
[PHY_INTERFACE_MODE_SGMII] = OCELOT_PORT_MODE_SGMII,
[PHY_INTERFACE_MODE_QSGMII] = OCELOT_PORT_MODE_QSGMII,
[PHY_INTERFACE_MODE_USXGMII] = OCELOT_PORT_MODE_USXGMII,
+ [PHY_INTERFACE_MODE_10G_QXGMII] = OCELOT_PORT_MODE_10G_QXGMII,
[PHY_INTERFACE_MODE_1000BASEX] = OCELOT_PORT_MODE_1000BASEX,
[PHY_INTERFACE_MODE_2500BASEX] = OCELOT_PORT_MODE_2500BASEX,
};
diff --git a/drivers/net/dsa/ocelot/felix.h b/drivers/net/dsa/ocelot/felix.h
index 211991f494e3..a657b190c5d7 100644
--- a/drivers/net/dsa/ocelot/felix.h
+++ b/drivers/net/dsa/ocelot/felix.h
@@ -12,8 +12,9 @@
#define OCELOT_PORT_MODE_SGMII BIT(1)
#define OCELOT_PORT_MODE_QSGMII BIT(2)
#define OCELOT_PORT_MODE_2500BASEX BIT(3)
-#define OCELOT_PORT_MODE_USXGMII BIT(4)
+#define OCELOT_PORT_MODE_USXGMII BIT(4) /* compatibility */
#define OCELOT_PORT_MODE_1000BASEX BIT(5)
+#define OCELOT_PORT_MODE_10G_QXGMII BIT(6)
struct device_node;
diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 7b35d24c38d7..8cf4c8986587 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -34,7 +34,8 @@
OCELOT_PORT_MODE_QSGMII | \
OCELOT_PORT_MODE_1000BASEX | \
OCELOT_PORT_MODE_2500BASEX | \
- OCELOT_PORT_MODE_USXGMII)
+ OCELOT_PORT_MODE_USXGMII | \
+ OCELOT_PORT_MODE_10G_QXGMII)
static const u32 vsc9959_port_modes[VSC9959_NUM_PORTS] = {
VSC9959_PORT_MODE_SERDES,
generated by cgit (git 2.51.2) at 2025-12-01 02:40:46 +0000