1 files changed, 27 insertions, 43 deletions

diff --git a/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c b/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
index 4236700fc1ad..a2b411a93b0f 100644
--- a/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
+++ b/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
@@ -3081,7 +3081,7 @@ static int si_get_vce_clock_voltage(struct amdgpu_device *adev,
 static bool si_dpm_vblank_too_short(void *handle)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
-	u32 vblank_time = amdgpu_dpm_get_vblank_time(adev);
+	u32 vblank_time = adev->pm.pm_display_cfg.min_vblank_time;
 	/* we never hit the non-gddr5 limit so disable it */
 	u32 switch_limit = adev->gmc.vram_type == AMDGPU_VRAM_TYPE_GDDR5 ? 450 : 0;
 
@@ -3447,9 +3447,10 @@ static void rv770_get_engine_memory_ss(struct amdgpu_device *adev)
 static void si_apply_state_adjust_rules(struct amdgpu_device *adev,
 					struct amdgpu_ps *rps)
 {
+	const struct amd_pp_display_configuration *display_cfg =
+		&adev->pm.pm_display_cfg;
 	struct  si_ps *ps = si_get_ps(rps);
 	struct amdgpu_clock_and_voltage_limits *max_limits;
-	struct amdgpu_connector *conn;
 	bool disable_mclk_switching = false;
 	bool disable_sclk_switching = false;
 	u32 mclk, sclk;
@@ -3488,14 +3489,9 @@ static void si_apply_state_adjust_rules(struct amdgpu_device *adev,
 	 * For example, 4K 60Hz and 1080p 144Hz fall into this category.
 	 * Find number of such displays connected.
 	 */
-	for (i = 0; i < adev->mode_info.num_crtc; i++) {
-		if (!(adev->pm.dpm.new_active_crtcs & (1 << i)) ||
-			!adev->mode_info.crtcs[i]->enabled)
-			continue;
-
-		conn = to_amdgpu_connector(adev->mode_info.crtcs[i]->connector);
-
-		if (conn->pixelclock_for_modeset > 297000)
+	for (i = 0; i < display_cfg->num_display; i++) {
+		/* The array only contains active displays. */
+		if (display_cfg->displays[i].pixel_clock > 297000)
 			high_pixelclock_count++;
 	}
 
@@ -3504,6 +3500,11 @@ static void si_apply_state_adjust_rules(struct amdgpu_device *adev,
 	 * for these GPUs to calculate bandwidth requirements.
 	 */
 	if (high_pixelclock_count) {
+		/* Work around flickering lines at the bottom edge
+		 * of the screen when using a single 4K 60Hz monitor.
+		 */
+		disable_mclk_switching = true;
+
 		/* On Oland, we observe some flickering when two 4K 60Hz
 		 * displays are connected, possibly because voltage is too low.
 		 * Raise the voltage by requiring a higher SCLK.
@@ -3523,7 +3524,7 @@ static void si_apply_state_adjust_rules(struct amdgpu_device *adev,
 		rps->ecclk = 0;
 	}
 
-	if ((adev->pm.dpm.new_active_crtc_count > 1) ||
+	if ((adev->pm.pm_display_cfg.num_display > 1) ||
 	    si_dpm_vblank_too_short(adev))
 		disable_mclk_switching = true;
 
@@ -3671,7 +3672,7 @@ static void si_apply_state_adjust_rules(struct amdgpu_device *adev,
 						   ps->performance_levels[i].mclk,
 						   max_limits->vddc,  &ps->performance_levels[i].vddc);
 		btc_apply_voltage_dependency_rules(&adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk,
-						   adev->clock.current_dispclk,
+						   display_cfg->display_clk,
 						   max_limits->vddc,  &ps->performance_levels[i].vddc);
 	}
 
@@ -4196,16 +4197,16 @@ static void si_program_ds_registers(struct amdgpu_device *adev)
 
 static void si_program_display_gap(struct amdgpu_device *adev)
 {
+	const struct amd_pp_display_configuration *cfg = &adev->pm.pm_display_cfg;
 	u32 tmp, pipe;
-	int i;
 
 	tmp = RREG32(mmCG_DISPLAY_GAP_CNTL) & ~(CG_DISPLAY_GAP_CNTL__DISP1_GAP_MASK | CG_DISPLAY_GAP_CNTL__DISP2_GAP_MASK);
-	if (adev->pm.dpm.new_active_crtc_count > 0)
+	if (cfg->num_display > 0)
 		tmp |= R600_PM_DISPLAY_GAP_VBLANK_OR_WM << CG_DISPLAY_GAP_CNTL__DISP1_GAP__SHIFT;
 	else
 		tmp |= R600_PM_DISPLAY_GAP_IGNORE << CG_DISPLAY_GAP_CNTL__DISP1_GAP__SHIFT;
 
-	if (adev->pm.dpm.new_active_crtc_count > 1)
+	if (cfg->num_display > 1)
 		tmp |= R600_PM_DISPLAY_GAP_VBLANK_OR_WM << CG_DISPLAY_GAP_CNTL__DISP2_GAP__SHIFT;
 	else
 		tmp |= R600_PM_DISPLAY_GAP_IGNORE << CG_DISPLAY_GAP_CNTL__DISP2_GAP__SHIFT;
@@ -4215,17 +4216,8 @@ static void si_program_display_gap(struct amdgpu_device *adev)
 	tmp = RREG32(DCCG_DISP_SLOW_SELECT_REG);
 	pipe = (tmp & DCCG_DISP1_SLOW_SELECT_MASK) >> DCCG_DISP1_SLOW_SELECT_SHIFT;
 
-	if ((adev->pm.dpm.new_active_crtc_count > 0) &&
-	    (!(adev->pm.dpm.new_active_crtcs & (1 << pipe)))) {
-		/* find the first active crtc */
-		for (i = 0; i < adev->mode_info.num_crtc; i++) {
-			if (adev->pm.dpm.new_active_crtcs & (1 << i))
-				break;
-		}
-		if (i == adev->mode_info.num_crtc)
-			pipe = 0;
-		else
-			pipe = i;
+	if (cfg->num_display > 0 && pipe != cfg->crtc_index) {
+		pipe = cfg->crtc_index;
 
 		tmp &= ~DCCG_DISP1_SLOW_SELECT_MASK;
 		tmp |= DCCG_DISP1_SLOW_SELECT(pipe);
@@ -4236,7 +4228,7 @@ static void si_program_display_gap(struct amdgpu_device *adev)
 	 * This can be a problem on PowerXpress systems or if you want to use the card
 	 * for offscreen rendering or compute if there are no crtcs enabled.
 	 */
-	si_notify_smc_display_change(adev, adev->pm.dpm.new_active_crtc_count > 0);
+	si_notify_smc_display_change(adev, cfg->num_display > 0);
 }
 
 static void si_enable_spread_spectrum(struct amdgpu_device *adev, bool enable)
@@ -5545,7 +5537,7 @@ static int si_convert_power_level_to_smc(struct amdgpu_device *adev,
 	    (pl->mclk <= pi->mclk_stutter_mode_threshold) &&
 	    !eg_pi->uvd_enabled &&
 	    (RREG32(mmDPG_PIPE_STUTTER_CONTROL) & DPG_PIPE_STUTTER_CONTROL__STUTTER_ENABLE_MASK) &&
-	    (adev->pm.dpm.new_active_crtc_count <= 2)) {
+	    (adev->pm.pm_display_cfg.num_display <= 2)) {
 		level->mcFlags |= SISLANDS_SMC_MC_STUTTER_EN;
 	}
 
@@ -5694,7 +5686,7 @@ static bool si_is_state_ulv_compatible(struct amdgpu_device *adev,
 	/* XXX validate against display requirements! */
 
 	for (i = 0; i < adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.count; i++) {
-		if (adev->clock.current_dispclk <=
+		if (adev->pm.pm_display_cfg.display_clk <=
 		    adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.entries[i].clk) {
 			if (ulv->pl.vddc <
 			    adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.entries[i].v)
@@ -5848,30 +5840,22 @@ static int si_upload_ulv_state(struct amdgpu_device *adev)
 
 static int si_upload_smc_data(struct amdgpu_device *adev)
 {
-	struct amdgpu_crtc *amdgpu_crtc = NULL;
-	int i;
+	const struct amd_pp_display_configuration *cfg = &adev->pm.pm_display_cfg;
 	u32 crtc_index = 0;
 	u32 mclk_change_block_cp_min = 0;
 	u32 mclk_change_block_cp_max = 0;
 
-	for (i = 0; i < adev->mode_info.num_crtc; i++) {
-		if (adev->pm.dpm.new_active_crtcs & (1 << i)) {
-			amdgpu_crtc = adev->mode_info.crtcs[i];
-			break;
-		}
-	}
-
 	/* When a display is plugged in, program these so that the SMC
 	 * performs MCLK switching when it doesn't cause flickering.
 	 * When no display is plugged in, there is no need to restrict
 	 * MCLK switching, so program them to zero.
 	 */
-	if (adev->pm.dpm.new_active_crtc_count && amdgpu_crtc) {
-		crtc_index = amdgpu_crtc->crtc_id;
+	if (cfg->num_display) {
+		crtc_index = cfg->crtc_index;
 
-		if (amdgpu_crtc->line_time) {
-			mclk_change_block_cp_min = 200 / amdgpu_crtc->line_time;
-			mclk_change_block_cp_max = 100 / amdgpu_crtc->line_time;
+		if (cfg->line_time_in_us) {
+			mclk_change_block_cp_min = 200 / cfg->line_time_in_us;
+			mclk_change_block_cp_max = 100 / cfg->line_time_in_us;
 		}
 	}