perf annotate: Add some of the arithmetic instructions to support instruction tracking in powerpc

Data-type profiling has the concept of instruction tracking.

Example sequence in powerpc:

	ld      r10,264(r3)
	mr      r31,r3
	<<after some sequence>
	ld      r9,312(r31)

or differently

	lwz	r10,264(r3)
	add	r31, r3, RB
	lwz	r9, 0(r31)

If a sample is hit at "lwz r9, 0(r31)", data type of r31 depends
on previous instruction sequence here. So to track the previous
instructions, patch adds changes to identify some of the arithmetic
instructions which are having opcode as 31.

Since memory instructions also has cases with opcode 31, use the bits
22:30 to filter the arithmetic instructions here.

Also there are instructions with just two operands like "addme", "addze".

This patch adds new instructions ops "arithmetic_ops" to handle this

Reviewed-by: Kajol Jain <[email protected]>
Reviewed-by: Namhyung Kim <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Tested-by: Kajol Jain <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Akanksha J N <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Hari Bathini <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Segher Boessenkool <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

1 files changed, 51 insertions, 0 deletions

diff --git a/tools/perf/util/disasm.c b/tools/perf/util/disasm.c
index e36be7b7c625..65915e1f575a 100644
--- a/tools/perf/util/disasm.c
+++ b/tools/perf/util/disasm.c
@@ -37,6 +37,7 @@ static struct ins_ops nop_ops;
 static struct ins_ops lock_ops;
 static struct ins_ops ret_ops;
 static struct ins_ops load_store_ops;
+static struct ins_ops arithmetic_ops;
 
 static int jump__scnprintf(struct ins *ins, char *bf, size_t size,
 			   struct ins_operands *ops, int max_ins_name);
@@ -678,6 +679,56 @@ static struct ins_ops mov_ops = {
 	.scnprintf = mov__scnprintf,
 };
 
+#define PPC_22_30(R)    (((R) >> 1) & 0x1ff)
+#define MINUS_EXT_XO_FORM	234
+#define SUB_EXT_XO_FORM		232
+#define	ADD_ZERO_EXT_XO_FORM	202
+#define	SUB_ZERO_EXT_XO_FORM	200
+
+static int arithmetic__scnprintf(struct ins *ins, char *bf, size_t size,
+		struct ins_operands *ops, int max_ins_name)
+{
+	return scnprintf(bf, size, "%-*s %s", max_ins_name, ins->name,
+			ops->raw);
+}
+
+/*
+ * Sets the fields: multi_regs and "mem_ref".
+ * "mem_ref" is set for ops->source which is later used to
+ * fill the objdump->memory_ref-char field. This ops is currently
+ * used by powerpc and since binary instruction code is used to
+ * extract opcode, regs and offset, no other parsing is needed here.
+ *
+ * Dont set multi regs for 4 cases since it has only one operand
+ * for source:
+ * - Add to Minus One Extended XO-form ( Ex: addme, addmeo )
+ * - Subtract From Minus One Extended XO-form ( Ex: subfme )
+ * - Add to Zero Extended XO-form ( Ex: addze, addzeo )
+ * - Subtract From Zero Extended XO-form ( Ex: subfze )
+ */
+static int arithmetic__parse(struct arch *arch __maybe_unused, struct ins_operands *ops,
+		struct map_symbol *ms __maybe_unused, struct disasm_line *dl)
+{
+	int opcode = PPC_OP(dl->raw.raw_insn);
+
+	ops->source.mem_ref = false;
+	if (opcode == 31) {
+		if ((opcode != MINUS_EXT_XO_FORM) && (opcode != SUB_EXT_XO_FORM) \
+				&& (opcode != ADD_ZERO_EXT_XO_FORM) && (opcode != SUB_ZERO_EXT_XO_FORM))
+			ops->source.multi_regs = true;
+	}
+
+	ops->target.mem_ref = false;
+	ops->target.multi_regs = false;
+
+	return 0;
+}
+
+static struct ins_ops arithmetic_ops = {
+	.parse     = arithmetic__parse,
+	.scnprintf = arithmetic__scnprintf,
+};
+
 static int load_store__scnprintf(struct ins *ins, char *bf, size_t size,
 		struct ins_operands *ops, int max_ins_name)
 {