diff options
| author | Pekon Gupta <[email protected]> | 2014-05-19 09:15:46 +0000 |
|---|---|---|
| committer | Tony Lindgren <[email protected]> | 2014-05-27 21:22:31 +0000 |
| commit | 99ffa6425f1b9ac39c5e9946c1c286f687b97c3e (patch) | |
| tree | acf10444f4b64f6ff73d3223a2e73aa7e20ca405 /tools/perf/scripts/python/sctop.py | |
| parent | ARM: OMAP2+: gpmc: enable BCH_HW ecc-scheme for AM43xx platforms (diff) | |
| download | kernel-99ffa6425f1b9ac39c5e9946c1c286f687b97c3e.tar.gz kernel-99ffa6425f1b9ac39c5e9946c1c286f687b97c3e.zip | |
ARM: dts: am437x-gp-evm: add support for parallel NAND flash
Adds pinmux and DT node for Micron (MT29F4G08AB) x8 NAND device present on
am437x-gp-evm board.
(1) As NAND Flash data lines are muxed with eMMC, Thus at a given time either
eMMC or NAND can be enabled. Selection between eMMC and NAND is controlled:
(a) By dynamically driving following GPIO pin from software
SPI2_CS0(GPIO) == 0 NAND is selected (default)
SPI2_CS0(GPIO) == 1 eMMC is selected
(b) By statically using Jumper (J89) on the board
(2) As NAND device connnected to this board has page-size=4K and oob-size=224,
So ROM code expects boot-loaders to be flashed in BCH16 ECC scheme for
NAND boot.
Signed-off-by: Pekon Gupta <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Diffstat (limited to 'tools/perf/scripts/python/sctop.py')
0 files changed, 0 insertions, 0 deletions