Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

1 files changed, 58 insertions, 55 deletions

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index e73431549ce7..4d4ff4d4917a 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -231,8 +231,19 @@ static void __ieee80211_queue_skb_to_iface(struct ieee80211_sub_if_data *sdata,
 
 	skb_queue_tail(&sdata->skb_queue, skb);
 	wiphy_work_queue(sdata->local->hw.wiphy, &sdata->work);
-	if (sta)
-		sta->deflink.rx_stats.packets++;
+	if (sta) {
+		struct link_sta_info *link_sta_info;
+
+		if (link_id >= 0) {
+			link_sta_info = rcu_dereference(sta->link[link_id]);
+			if (!link_sta_info)
+				return;
+		} else {
+			link_sta_info = &sta->deflink;
+		}
+
+		link_sta_info->rx_stats.packets++;
+	}
 }
 
 static void ieee80211_queue_skb_to_iface(struct ieee80211_sub_if_data *sdata,
@@ -1521,9 +1532,8 @@ ieee80211_rx_h_check(struct ieee80211_rx_data *rx)
 		}
 
 		if (rx->sdata->vif.type == NL80211_IFTYPE_AP &&
-		    cfg80211_rx_spurious_frame(rx->sdata->dev,
-					       hdr->addr2,
-					       GFP_ATOMIC))
+		    cfg80211_rx_spurious_frame(rx->sdata->dev, hdr->addr2,
+					       rx->link_id, GFP_ATOMIC))
 			return RX_DROP_U_SPURIOUS;
 
 		return RX_DROP;
@@ -1861,7 +1871,7 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx)
 			if (!test_and_set_sta_flag(sta, WLAN_STA_4ADDR_EVENT))
 				cfg80211_rx_unexpected_4addr_frame(
 					rx->sdata->dev, sta->sta.addr,
-					GFP_ATOMIC);
+					rx->link_id, GFP_ATOMIC);
 			return RX_DROP_U_UNEXPECTED_4ADDR_FRAME;
 		}
 		/*
@@ -3022,7 +3032,6 @@ __ieee80211_rx_h_amsdu(struct ieee80211_rx_data *rx, u8 data_offset)
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	__le16 fc = hdr->frame_control;
 	struct sk_buff_head frame_list;
-	ieee80211_rx_result res;
 	struct ethhdr ethhdr;
 	const u8 *check_da = ethhdr.h_dest, *check_sa = ethhdr.h_source;
 
@@ -3084,24 +3093,18 @@ __ieee80211_rx_h_amsdu(struct ieee80211_rx_data *rx, u8 data_offset)
 	while (!skb_queue_empty(&frame_list)) {
 		rx->skb = __skb_dequeue(&frame_list);
 
-		res = ieee80211_rx_mesh_data(rx->sdata, rx->sta, rx->skb);
-		switch (res) {
+		switch (ieee80211_rx_mesh_data(rx->sdata, rx->sta, rx->skb)) {
 		case RX_QUEUED:
-			continue;
-		case RX_CONTINUE:
 			break;
+		case RX_CONTINUE:
+			if (ieee80211_frame_allowed(rx, fc)) {
+				ieee80211_deliver_skb(rx);
+				break;
+			}
+			fallthrough;
 		default:
-			goto free;
+			dev_kfree_skb(rx->skb);
 		}
-
-		if (!ieee80211_frame_allowed(rx, fc))
-			goto free;
-
-		ieee80211_deliver_skb(rx);
-		continue;
-
-free:
-		dev_kfree_skb(rx->skb);
 	}
 
 	return RX_QUEUED;
@@ -3187,7 +3190,8 @@ ieee80211_rx_h_data(struct ieee80211_rx_data *rx)
 		if (rx->sta &&
 		    !test_and_set_sta_flag(rx->sta, WLAN_STA_4ADDR_EVENT))
 			cfg80211_rx_unexpected_4addr_frame(
-				rx->sdata->dev, rx->sta->sta.addr, GFP_ATOMIC);
+				rx->sdata->dev, rx->sta->sta.addr, rx->link_id,
+				GFP_ATOMIC);
 		return RX_DROP;
 	}
 
@@ -3576,41 +3580,18 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
 			goto handled;
 		}
 		case WLAN_HT_ACTION_NOTIFY_CHANWIDTH: {
-			struct ieee80211_supported_band *sband;
 			u8 chanwidth = mgmt->u.action.u.ht_notify_cw.chanwidth;
-			enum ieee80211_sta_rx_bandwidth max_bw, new_bw;
-			struct sta_opmode_info sta_opmode = {};
+
+			if (chanwidth != IEEE80211_HT_CHANWIDTH_20MHZ &&
+			    chanwidth != IEEE80211_HT_CHANWIDTH_ANY)
+				goto invalid;
 
 			/* If it doesn't support 40 MHz it can't change ... */
 			if (!(rx->link_sta->pub->ht_cap.cap &
-					IEEE80211_HT_CAP_SUP_WIDTH_20_40))
+				IEEE80211_HT_CAP_SUP_WIDTH_20_40))
 				goto handled;
 
-			if (chanwidth == IEEE80211_HT_CHANWIDTH_20MHZ)
-				max_bw = IEEE80211_STA_RX_BW_20;
-			else
-				max_bw = ieee80211_sta_cap_rx_bw(rx->link_sta);
-
-			/* set cur_max_bandwidth and recalc sta bw */
-			rx->link_sta->cur_max_bandwidth = max_bw;
-			new_bw = ieee80211_sta_cur_vht_bw(rx->link_sta);
-
-			if (rx->link_sta->pub->bandwidth == new_bw)
-				goto handled;
-
-			rx->link_sta->pub->bandwidth = new_bw;
-			sband = rx->local->hw.wiphy->bands[status->band];
-			sta_opmode.bw =
-				ieee80211_sta_rx_bw_to_chan_width(rx->link_sta);
-			sta_opmode.changed = STA_OPMODE_MAX_BW_CHANGED;
-
-			rate_control_rate_update(local, sband, rx->link_sta,
-						 IEEE80211_RC_BW_CHANGED);
-			cfg80211_sta_opmode_change_notify(sdata->dev,
-							  rx->sta->addr,
-							  &sta_opmode,
-							  GFP_ATOMIC);
-			goto handled;
+			goto queue;
 		}
 		default:
 			goto invalid;
@@ -4234,10 +4215,16 @@ static bool ieee80211_rx_data_set_sta(struct ieee80211_rx_data *rx,
 		rx->link_sta = NULL;
 	}
 
-	if (link_id < 0)
-		rx->link = &rx->sdata->deflink;
-	else if (!ieee80211_rx_data_set_link(rx, link_id))
+	if (link_id < 0) {
+		if (ieee80211_vif_is_mld(&rx->sdata->vif) &&
+		    sta && !sta->sta.valid_links)
+			rx->link =
+				rcu_dereference(rx->sdata->link[sta->deflink.link_id]);
+		else
+			rx->link = &rx->sdata->deflink;
+	} else if (!ieee80211_rx_data_set_link(rx, link_id)) {
 		return false;
+	}
 
 	return true;
 }
@@ -5119,8 +5106,24 @@ static bool ieee80211_rx_for_interface(struct ieee80211_rx_data *rx,
 		struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
 
 		sta = sta_info_get_bss(rx->sdata, hdr->addr2);
-		if (status->link_valid)
+		if (status->link_valid) {
 			link_id = status->link_id;
+		} else if (ieee80211_vif_is_mld(&rx->sdata->vif) &&
+			   status->freq) {
+			struct ieee80211_link_data *link;
+			struct ieee80211_chanctx_conf *conf;
+
+			for_each_link_data_rcu(rx->sdata, link) {
+				conf = rcu_dereference(link->conf->chanctx_conf);
+				if (!conf || !conf->def.chan)
+					continue;
+
+				if (status->freq == conf->def.chan->center_freq) {
+					link_id = link->link_id;
+					break;
+				}
+			}
+		}
 	}
 
 	if (!ieee80211_rx_data_set_sta(rx, sta, link_id))