Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

1 files changed, 17 insertions, 15 deletions

diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 7bd29a9ff0db..1e1410237b6e 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -60,7 +60,7 @@
 static int ip6_finish_output2(struct net *net, struct sock *sk, struct sk_buff *skb)
 {
 	struct dst_entry *dst = skb_dst(skb);
-	struct net_device *dev = dst->dev;
+	struct net_device *dev = dst_dev(dst);
 	struct inet6_dev *idev = ip6_dst_idev(dst);
 	unsigned int hh_len = LL_RESERVED_SPACE(dev);
 	const struct in6_addr *daddr, *nexthop;
@@ -232,8 +232,9 @@ static int ip6_finish_output(struct net *net, struct sock *sk, struct sk_buff *s
 
 int ip6_output(struct net *net, struct sock *sk, struct sk_buff *skb)
 {
-	struct net_device *dev = skb_dst(skb)->dev, *indev = skb->dev;
-	struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));
+	struct dst_entry *dst = skb_dst(skb);
+	struct net_device *dev = dst_dev(dst), *indev = skb->dev;
+	struct inet6_dev *idev = ip6_dst_idev(dst);
 
 	skb->protocol = htons(ETH_P_IPV6);
 	skb->dev = dev;
@@ -271,7 +272,7 @@ int ip6_xmit(const struct sock *sk, struct sk_buff *skb, struct flowi6 *fl6,
 	const struct ipv6_pinfo *np = inet6_sk(sk);
 	struct in6_addr *first_hop = &fl6->daddr;
 	struct dst_entry *dst = skb_dst(skb);
-	struct net_device *dev = dst->dev;
+	struct net_device *dev = dst_dev(dst);
 	struct inet6_dev *idev = ip6_dst_idev(dst);
 	struct hop_jumbo_hdr *hop_jumbo;
 	int hoplen = sizeof(*hop_jumbo);
@@ -503,13 +504,15 @@ int ip6_forward(struct sk_buff *skb)
 	struct dst_entry *dst = skb_dst(skb);
 	struct ipv6hdr *hdr = ipv6_hdr(skb);
 	struct inet6_skb_parm *opt = IP6CB(skb);
-	struct net *net = dev_net(dst->dev);
+	struct net *net = dev_net(dst_dev(dst));
+	struct net_device *dev;
 	struct inet6_dev *idev;
 	SKB_DR(reason);
 	u32 mtu;
 
 	idev = __in6_dev_get_safely(dev_get_by_index_rcu(net, IP6CB(skb)->iif));
-	if (READ_ONCE(net->ipv6.devconf_all->forwarding) == 0)
+	if (!READ_ONCE(net->ipv6.devconf_all->forwarding) &&
+	    (!idev || !READ_ONCE(idev->cnf.force_forwarding)))
 		goto error;
 
 	if (skb->pkt_type != PACKET_HOST)
@@ -561,7 +564,7 @@ int ip6_forward(struct sk_buff *skb)
 
 	/* XXX: idev->cnf.proxy_ndp? */
 	if (READ_ONCE(net->ipv6.devconf_all->proxy_ndp) &&
-	    pneigh_lookup(&nd_tbl, net, &hdr->daddr, skb->dev, 0)) {
+	    pneigh_lookup(&nd_tbl, net, &hdr->daddr, skb->dev)) {
 		int proxied = ip6_forward_proxy_check(skb);
 		if (proxied > 0) {
 			/* It's tempting to decrease the hop limit
@@ -591,12 +594,12 @@ int ip6_forward(struct sk_buff *skb)
 		goto drop;
 	}
 	dst = skb_dst(skb);
-
+	dev = dst_dev(dst);
 	/* IPv6 specs say nothing about it, but it is clear that we cannot
 	   send redirects to source routed frames.
 	   We don't send redirects to frames decapsulated from IPsec.
 	 */
-	if (IP6CB(skb)->iif == dst->dev->ifindex &&
+	if (IP6CB(skb)->iif == dev->ifindex &&
 	    opt->srcrt == 0 && !skb_sec_path(skb)) {
 		struct in6_addr *target = NULL;
 		struct inet_peer *peer;
@@ -644,7 +647,7 @@ int ip6_forward(struct sk_buff *skb)
 
 	if (ip6_pkt_too_big(skb, mtu)) {
 		/* Again, force OUTPUT device used as source address */
-		skb->dev = dst->dev;
+		skb->dev = dev;
 		icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu);
 		__IP6_INC_STATS(net, idev, IPSTATS_MIB_INTOOBIGERRORS);
 		__IP6_INC_STATS(net, ip6_dst_idev(dst),
@@ -653,7 +656,7 @@ int ip6_forward(struct sk_buff *skb)
 		return -EMSGSIZE;
 	}
 
-	if (skb_cow(skb, dst->dev->hard_header_len)) {
+	if (skb_cow(skb, dev->hard_header_len)) {
 		__IP6_INC_STATS(net, ip6_dst_idev(dst),
 				IPSTATS_MIB_OUTDISCARDS);
 		goto drop;
@@ -666,7 +669,7 @@ int ip6_forward(struct sk_buff *skb)
 	hdr->hop_limit--;
 
 	return NF_HOOK(NFPROTO_IPV6, NF_INET_FORWARD,
-		       net, NULL, skb, skb->dev, dst->dev,
+		       net, NULL, skb, skb->dev, dev,
 		       ip6_forward_finish);
 
 error:
@@ -1093,7 +1096,7 @@ static struct dst_entry *ip6_sk_dst_check(struct sock *sk,
 #ifdef CONFIG_IPV6_SUBTREES
 	    ip6_rt_check(&rt->rt6i_src, &fl6->saddr, np->saddr_cache) ||
 #endif
-	   (fl6->flowi6_oif && fl6->flowi6_oif != dst->dev->ifindex)) {
+	   (fl6->flowi6_oif && fl6->flowi6_oif != dst_dev(dst)->ifindex)) {
 		dst_release(dst);
 		dst = NULL;
 	}
@@ -1760,8 +1763,7 @@ alloc_new_skb:
 			if (WARN_ON_ONCE(copy > msg->msg_iter.count))
 				goto error;
 
-			err = skb_splice_from_iter(skb, &msg->msg_iter, copy,
-						   sk->sk_allocation);
+			err = skb_splice_from_iter(skb, &msg->msg_iter, copy);
 			if (err < 0)
 				goto error;
 			copy = err;