Merge branch 'pci/errors'

- Add PCI_ERROR_RESPONSE and related definitions for signaling and checking
  for transaction errors on PCI (Naveen Naidu)

- Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead
  of in host controller drivers, when transactions fail on PCI (Naveen
  Naidu)

- Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads
  (Naveen Naidu)

* pci/errors:
  PCI: xgene: Use PCI_ERROR_RESPONSE to identify config read errors
  PCI: hv: Use PCI_ERROR_RESPONSE to identify config read errors
  PCI: keystone: Use PCI_ERROR_RESPONSE to identify config read errors
  PCI: Use PCI_ERROR_RESPONSE to identify config read errors
  PCI: cpqphp: Use PCI_POSSIBLE_ERROR() to check config reads
  PCI/PME: Use PCI_POSSIBLE_ERROR() to check config reads
  PCI/DPC: Use PCI_POSSIBLE_ERROR() to check config reads
  PCI: pciehp: Use PCI_POSSIBLE_ERROR() to check config reads
  PCI: vmd: Use PCI_POSSIBLE_ERROR() to check config reads
  PCI/ERR: Use PCI_POSSIBLE_ERROR() to check config reads
  PCI: rockchip-host: Drop error data fabrication when config read fails
  PCI: rcar-host: Drop error data fabrication when config read fails
  PCI: altera: Drop error data fabrication when config read fails
  PCI: mvebu: Drop error data fabrication when config read fails
  PCI: aardvark: Drop error data fabrication when config read fails
  PCI: kirin: Drop error data fabrication when config read fails
  PCI: histb: Drop error data fabrication when config read fails
  PCI: exynos: Drop error data fabrication when config read fails
  PCI: mediatek: Drop error data fabrication when config read fails
  PCI: iproc: Drop error data fabrication when config read fails
  PCI: thunder: Drop error data fabrication when config read fails
  PCI: Drop error data fabrication when config read fails
  PCI: Use PCI_SET_ERROR_RESPONSE() for disconnected devices
  PCI: Set error response data when config read fails
  PCI: Add PCI_ERROR_RESPONSE and related definitions

1 files changed, 1 insertions, 3 deletions

diff --git a/drivers/pci/controller/pci-thunder-pem.c b/drivers/pci/controller/pci-thunder-pem.c
index 0660b9da204f..06a9855cb431 100644
--- a/drivers/pci/controller/pci-thunder-pem.c
+++ b/drivers/pci/controller/pci-thunder-pem.c
@@ -41,10 +41,8 @@ static int thunder_pem_bridge_read(struct pci_bus *bus, unsigned int devfn,
 	struct pci_config_window *cfg = bus->sysdata;
 	struct thunder_pem_pci *pem_pci = (struct thunder_pem_pci *)cfg->priv;
 
-	if (devfn != 0 || where >= 2048) {
-		*val = ~0;
+	if (devfn != 0 || where >= 2048)
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
 
 	/*
 	 * 32-bit accesses only.  Write the address to the low order