PCI: dw-rockchip: Delay link training after hot reset in EP mode

RK3588 TRM, section "11.6.1.3.3 Hot Reset and Link-Down Reset" states that:

  If you want to delay link re-establishment (after reset) so that you can
  reprogram some registers through DBI, you must set app_ltssm_enable =0
  immediately after core_rst_n as shown in above. This can be achieved by
  enable the app_dly2_en, and end-up the delay by assert app_dly2_done.

I.e. setting app_dly2_en will automatically deassert app_ltssm_enable on
a hot reset, and setting app_dly2_done will re-assert app_ltssm_enable,
re-enabling link training.

When receiving a hot reset/link-down IRQ when running in EP mode, we will
call dw_pcie_ep_linkdown(), which may update registers through DBI. Unless
link training is inhibited, these register updates race with the link
training.

To avoid the race, set PCIE_LTSSM_APP_DLY2_EN so the controller never
automatically trains the link after a link-down or hot reset interrupt.
That way any DBI updates done in the dw_pcie_ep_linkdown() path will happen
while the link is still down.  Then allow link training by setting
PCIE_LTSSM_APP_DLY2_DONE

Co-developed-by: Niklas Cassel <[email protected]>
Signed-off-by: Wilfred Mallawa <[email protected]>
Signed-off-by: Niklas Cassel <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <[email protected]>
Link: https://patch.msgid.link/[email protected]

1 files changed, 12 insertions, 3 deletions

diff --git a/drivers/pci/controller/dwc/pcie-dw-rockchip.c b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
index 93171a392879..cd1e9352b21f 100644
--- a/drivers/pci/controller/dwc/pcie-dw-rockchip.c
+++ b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
@@ -58,6 +58,8 @@
 
 /* Hot Reset Control Register */
 #define PCIE_CLIENT_HOT_RESET_CTRL	0x180
+#define  PCIE_LTSSM_APP_DLY2_EN		BIT(1)
+#define  PCIE_LTSSM_APP_DLY2_DONE	BIT(3)
 #define  PCIE_LTSSM_ENABLE_ENHANCE	BIT(4)
 
 /* LTSSM Status Register */
@@ -474,7 +476,7 @@ static irqreturn_t rockchip_pcie_ep_sys_irq_thread(int irq, void *arg)
 	struct rockchip_pcie *rockchip = arg;
 	struct dw_pcie *pci = &rockchip->pci;
 	struct device *dev = pci->dev;
-	u32 reg;
+	u32 reg, val;
 
 	reg = rockchip_pcie_readl_apb(rockchip, PCIE_CLIENT_INTR_STATUS_MISC);
 	rockchip_pcie_writel_apb(rockchip, reg, PCIE_CLIENT_INTR_STATUS_MISC);
@@ -485,6 +487,10 @@ static irqreturn_t rockchip_pcie_ep_sys_irq_thread(int irq, void *arg)
 	if (reg & PCIE_LINK_REQ_RST_NOT_INT) {
 		dev_dbg(dev, "hot reset or link-down reset\n");
 		dw_pcie_ep_linkdown(&pci->ep);
+		/* Stop delaying link training. */
+		val = HIWORD_UPDATE_BIT(PCIE_LTSSM_APP_DLY2_DONE);
+		rockchip_pcie_writel_apb(rockchip, val,
+					 PCIE_CLIENT_HOT_RESET_CTRL);
 	}
 
 	if (reg & PCIE_RDLH_LINK_UP_CHGED) {
@@ -566,8 +572,11 @@ static int rockchip_pcie_configure_ep(struct platform_device *pdev,
 		return ret;
 	}
 
-	/* LTSSM enable control mode */
-	val = HIWORD_UPDATE_BIT(PCIE_LTSSM_ENABLE_ENHANCE);
+	/*
+	 * LTSSM enable control mode, and automatically delay link training on
+	 * hot reset/link-down reset.
+	 */
+	val = HIWORD_UPDATE_BIT(PCIE_LTSSM_ENABLE_ENHANCE | PCIE_LTSSM_APP_DLY2_EN);
 	rockchip_pcie_writel_apb(rockchip, val, PCIE_CLIENT_HOT_RESET_CTRL);
 
 	rockchip_pcie_writel_apb(rockchip, PCIE_CLIENT_EP_MODE,