Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

1 files changed, 37 insertions, 63 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/mld/regulatory.c b/drivers/net/wireless/intel/iwlwifi/mld/regulatory.c
index 436219d1ec5e..75d2f5cb23a7 100644
--- a/drivers/net/wireless/intel/iwlwifi/mld/regulatory.c
+++ b/drivers/net/wireless/intel/iwlwifi/mld/regulatory.c
@@ -71,40 +71,17 @@ void iwl_mld_get_bios_tables(struct iwl_mld *mld)
 static int iwl_mld_geo_sar_init(struct iwl_mld *mld)
 {
 	u32 cmd_id = WIDE_ID(PHY_OPS_GROUP, PER_CHAIN_LIMIT_OFFSET_CMD);
-	union iwl_geo_tx_power_profiles_cmd cmd;
-	u16 len;
-	u32 n_bands;
-	__le32 sk = cpu_to_le32(0);
-	int ret;
-	u8 cmd_ver = iwl_fw_lookup_cmd_ver(mld->fw, cmd_id,
-					   IWL_FW_CMD_VER_UNKNOWN);
-
-	BUILD_BUG_ON(offsetof(struct iwl_geo_tx_power_profiles_cmd_v4, ops) !=
-		     offsetof(struct iwl_geo_tx_power_profiles_cmd_v5, ops));
-
-	cmd.v4.ops = cpu_to_le32(IWL_PER_CHAIN_OFFSET_SET_TABLES);
-
 	/* Only set to South Korea if the table revision is 1 */
-	if (mld->fwrt.geo_rev == 1)
-		sk = cpu_to_le32(1);
-
-	if (cmd_ver == 5) {
-		len = sizeof(cmd.v5);
-		n_bands = ARRAY_SIZE(cmd.v5.table[0]);
-		cmd.v5.table_revision = sk;
-	} else if (cmd_ver == 4) {
-		len = sizeof(cmd.v4);
-		n_bands = ARRAY_SIZE(cmd.v4.table[0]);
-		cmd.v4.table_revision = sk;
-	} else {
-		return -EOPNOTSUPP;
-	}
+	__le32 sk = cpu_to_le32(mld->fwrt.geo_rev == 1 ? 1 : 0);
+	union iwl_geo_tx_power_profiles_cmd cmd = {
+		.v5.ops = cpu_to_le32(IWL_PER_CHAIN_OFFSET_SET_TABLES),
+		.v5.table_revision = sk,
+	};
+	int ret;
 
-	BUILD_BUG_ON(offsetof(struct iwl_geo_tx_power_profiles_cmd_v4, table) !=
-		     offsetof(struct iwl_geo_tx_power_profiles_cmd_v5, table));
-	/* the table is at the same position for all versions, so set use v4 */
-	ret = iwl_sar_geo_fill_table(&mld->fwrt, &cmd.v4.table[0][0],
-				     n_bands, BIOS_GEO_MAX_PROFILE_NUM);
+	ret = iwl_sar_geo_fill_table(&mld->fwrt, &cmd.v5.table[0][0],
+				     ARRAY_SIZE(cmd.v5.table[0]),
+				     BIOS_GEO_MAX_PROFILE_NUM);
 
 	/* It is a valid scenario to not support SAR, or miss wgds table,
 	 * but in that case there is no need to send the command.
@@ -112,7 +89,7 @@ static int iwl_mld_geo_sar_init(struct iwl_mld *mld)
 	if (ret)
 		return 0;
 
-	return iwl_mld_send_cmd_pdu(mld, cmd_id, &cmd, len);
+	return iwl_mld_send_cmd_pdu(mld, cmd_id, &cmd, sizeof(cmd.v5));
 }
 
 int iwl_mld_config_sar_profile(struct iwl_mld *mld, int prof_a, int prof_b)
@@ -120,37 +97,20 @@ int iwl_mld_config_sar_profile(struct iwl_mld *mld, int prof_a, int prof_b)
 	u32 cmd_id = REDUCE_TX_POWER_CMD;
 	struct iwl_dev_tx_power_cmd cmd = {
 		.common.set_mode = cpu_to_le32(IWL_TX_POWER_MODE_SET_CHAINS),
+		.v10.flags = cpu_to_le32(mld->fwrt.reduced_power_flags),
 	};
-	__le16 *per_chain;
 	int ret;
-	u16 len = sizeof(cmd.common);
-	u32 n_subbands;
-	u8 cmd_ver = iwl_fw_lookup_cmd_ver(mld->fw, cmd_id,
-					   IWL_FW_CMD_VER_UNKNOWN);
-
-	if (cmd_ver == 10) {
-		len += sizeof(cmd.v10);
-		n_subbands = IWL_NUM_SUB_BANDS_V2;
-		per_chain = &cmd.v10.per_chain[0][0][0];
-		cmd.v10.flags =
-			cpu_to_le32(mld->fwrt.reduced_power_flags);
-	} else if (cmd_ver == 9) {
-		len += sizeof(cmd.v9);
-		n_subbands = IWL_NUM_SUB_BANDS_V1;
-		per_chain = &cmd.v9.per_chain[0][0];
-	} else {
-		return -EOPNOTSUPP;
-	}
 
 	/* TODO: CDB - support IWL_NUM_CHAIN_TABLES_V2 */
-	ret = iwl_sar_fill_profile(&mld->fwrt, per_chain,
-				   IWL_NUM_CHAIN_TABLES,
-				   n_subbands, prof_a, prof_b);
+	ret = iwl_sar_fill_profile(&mld->fwrt, &cmd.v10.per_chain[0][0][0],
+				   IWL_NUM_CHAIN_TABLES, IWL_NUM_SUB_BANDS_V2,
+				   prof_a, prof_b);
 	/* return on error or if the profile is disabled (positive number) */
 	if (ret)
 		return ret;
 
-	return iwl_mld_send_cmd_pdu(mld, cmd_id, &cmd, len);
+	return iwl_mld_send_cmd_pdu(mld, cmd_id, &cmd,
+				    sizeof(cmd.common) + sizeof(cmd.v10));
 }
 
 int iwl_mld_init_sar(struct iwl_mld *mld)
@@ -238,21 +198,29 @@ void iwl_mld_configure_lari(struct iwl_mld *mld)
 	struct iwl_lari_config_change_cmd cmd = {
 		.config_bitmap = iwl_get_lari_config_bitmap(fwrt),
 	};
+	bool has_raw_dsm_capa = fw_has_capa(&fwrt->fw->ucode_capa,
+					    IWL_UCODE_TLV_CAPA_FW_ACCEPTS_RAW_DSM_TABLE);
 	int ret;
 	u32 value;
 
 	ret = iwl_bios_get_dsm(fwrt, DSM_FUNC_11AX_ENABLEMENT, &value);
-	if (!ret)
+	if (!ret) {
+		if (!has_raw_dsm_capa)
+			value &= DSM_11AX_ALLOW_BITMAP;
 		cmd.oem_11ax_allow_bitmap = cpu_to_le32(value);
+	}
 
 	ret = iwl_bios_get_dsm(fwrt, DSM_FUNC_ENABLE_UNII4_CHAN, &value);
-	if (!ret)
-		cmd.oem_unii4_allow_bitmap =
-			cpu_to_le32(value &= DSM_UNII4_ALLOW_BITMAP);
+	if (!ret) {
+		if (!has_raw_dsm_capa)
+			value &= DSM_UNII4_ALLOW_BITMAP;
+		cmd.oem_unii4_allow_bitmap = cpu_to_le32(value);
+	}
 
 	ret = iwl_bios_get_dsm(fwrt, DSM_FUNC_ACTIVATE_CHANNEL, &value);
 	if (!ret) {
-		value &= CHAN_STATE_ACTIVE_BITMAP_CMD_V12;
+		if (!has_raw_dsm_capa)
+			value &= CHAN_STATE_ACTIVE_BITMAP_CMD_V12;
 		cmd.chan_state_active_bitmap = cpu_to_le32(value);
 	}
 
@@ -261,13 +229,19 @@ void iwl_mld_configure_lari(struct iwl_mld *mld)
 		cmd.oem_uhb_allow_bitmap = cpu_to_le32(value);
 
 	ret = iwl_bios_get_dsm(fwrt, DSM_FUNC_FORCE_DISABLE_CHANNELS, &value);
-	if (!ret)
+	if (!ret) {
+		if (!has_raw_dsm_capa)
+			value &= DSM_FORCE_DISABLE_CHANNELS_ALLOWED_BITMAP;
 		cmd.force_disable_channels_bitmap = cpu_to_le32(value);
+	}
 
 	ret = iwl_bios_get_dsm(fwrt, DSM_FUNC_ENERGY_DETECTION_THRESHOLD,
 			       &value);
-	if (!ret)
+	if (!ret) {
+		if (!has_raw_dsm_capa)
+			value &= DSM_EDT_ALLOWED_BITMAP;
 		cmd.edt_bitmap = cpu_to_le32(value);
+	}
 
 	ret = iwl_bios_get_wbem(fwrt, &value);
 	if (!ret)