Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

1 files changed, 47 insertions, 63 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/mld/mlo.c b/drivers/net/wireless/intel/iwlwifi/mld/mlo.c
index dba5379ed009..e57f5388fe77 100644
--- a/drivers/net/wireless/intel/iwlwifi/mld/mlo.c
+++ b/drivers/net/wireless/intel/iwlwifi/mld/mlo.c
@@ -287,6 +287,36 @@ int iwl_mld_block_emlsr_sync(struct iwl_mld *mld, struct ieee80211_vif *vif,
 	return _iwl_mld_emlsr_block(mld, vif, reason, link_to_keep, true);
 }
 
+#define IWL_MLD_EMLSR_BLOCKED_TMP_NON_BSS_TIMEOUT (10 * HZ)
+
+static void iwl_mld_vif_iter_emlsr_block_tmp_non_bss(void *_data, u8 *mac,
+						     struct ieee80211_vif *vif)
+{
+	struct iwl_mld_vif *mld_vif = iwl_mld_vif_from_mac80211(vif);
+	int ret;
+
+	if (!iwl_mld_vif_has_emlsr_cap(vif))
+		return;
+
+	ret = iwl_mld_block_emlsr_sync(mld_vif->mld, vif,
+				       IWL_MLD_EMLSR_BLOCKED_TMP_NON_BSS,
+				       iwl_mld_get_primary_link(vif));
+	if (ret)
+		return;
+
+	wiphy_delayed_work_queue(mld_vif->mld->wiphy,
+				 &mld_vif->emlsr.tmp_non_bss_done_wk,
+				 IWL_MLD_EMLSR_BLOCKED_TMP_NON_BSS_TIMEOUT);
+}
+
+void iwl_mld_emlsr_block_tmp_non_bss(struct iwl_mld *mld)
+{
+	ieee80211_iterate_active_interfaces_mtx(mld->hw,
+						IEEE80211_IFACE_ITER_NORMAL,
+						iwl_mld_vif_iter_emlsr_block_tmp_non_bss,
+						NULL);
+}
+
 static void _iwl_mld_select_links(struct iwl_mld *mld,
 				  struct ieee80211_vif *vif);
 
@@ -530,10 +560,12 @@ void iwl_mld_emlsr_check_tpt(struct wiphy *wiphy, struct wiphy_work *wk)
 	/*
 	 * TPT is unblocked, need to check if the TPT criteria is still met.
 	 *
-	 * If EMLSR is active, then we also need to check the secondar link
-	 * requirements.
+	 * If EMLSR is active for at least 5 seconds, then we also
+	 * need to check the secondary link requirements.
 	 */
-	if (iwl_mld_emlsr_active(vif)) {
+	if (iwl_mld_emlsr_active(vif) &&
+	    time_is_before_jiffies(mld_vif->emlsr.last_entry_ts +
+				   IWL_MLD_TPT_COUNT_WINDOW)) {
 		sec_link_id = iwl_mld_get_other_link(vif, iwl_mld_get_primary_link(vif));
 		sec_link = iwl_mld_link_dereference_check(mld_vif, sec_link_id);
 		if (WARN_ON_ONCE(!sec_link))
@@ -657,42 +689,6 @@ s8 iwl_mld_get_emlsr_rssi_thresh(struct iwl_mld *mld,
 #undef RSSI_THRESHOLD
 }
 
-#define IWL_MLD_BT_COEX_DISABLE_EMLSR_RSSI_THRESH	-69
-#define IWL_MLD_BT_COEX_ENABLE_EMLSR_RSSI_THRESH	-63
-#define IWL_MLD_BT_COEX_WIFI_LOSS_THRESH		7
-
-VISIBLE_IF_IWLWIFI_KUNIT
-bool
-iwl_mld_bt_allows_emlsr(struct iwl_mld *mld, struct ieee80211_bss_conf *link,
-			bool check_entry)
-{
-	int bt_penalty, rssi_thresh;
-	s32 link_rssi;
-
-	if (WARN_ON_ONCE(!link->bss))
-		return false;
-
-	link_rssi = MBM_TO_DBM(link->bss->signal);
-	rssi_thresh = check_entry ?
-		      IWL_MLD_BT_COEX_ENABLE_EMLSR_RSSI_THRESH :
-		      IWL_MLD_BT_COEX_DISABLE_EMLSR_RSSI_THRESH;
-	/* No valid RSSI - force to take low rssi */
-	if (!link_rssi)
-		link_rssi = rssi_thresh - 1;
-
-	if (link_rssi > rssi_thresh)
-		bt_penalty = max(mld->last_bt_notif.wifi_loss_mid_high_rssi[PHY_BAND_24][0],
-				 mld->last_bt_notif.wifi_loss_mid_high_rssi[PHY_BAND_24][1]);
-	else
-		bt_penalty = max(mld->last_bt_notif.wifi_loss_low_rssi[PHY_BAND_24][0],
-				 mld->last_bt_notif.wifi_loss_low_rssi[PHY_BAND_24][1]);
-
-	IWL_DEBUG_EHT(mld, "BT penalty for link-id %0X is %d\n",
-		      link->link_id, bt_penalty);
-	return bt_penalty < IWL_MLD_BT_COEX_WIFI_LOSS_THRESH;
-}
-EXPORT_SYMBOL_IF_IWLWIFI_KUNIT(iwl_mld_bt_allows_emlsr);
-
 static u32
 iwl_mld_emlsr_disallowed_with_link(struct iwl_mld *mld,
 				   struct ieee80211_vif *vif,
@@ -707,8 +703,7 @@ iwl_mld_emlsr_disallowed_with_link(struct iwl_mld *mld,
 	if (WARN_ON_ONCE(!conf))
 		return IWL_MLD_EMLSR_EXIT_INVALID;
 
-	if (link->chandef->chan->band == NL80211_BAND_2GHZ &&
-	    !iwl_mld_bt_allows_emlsr(mld, conf, true))
+	if (link->chandef->chan->band == NL80211_BAND_2GHZ && mld->bt_is_active)
 		ret |= IWL_MLD_EMLSR_EXIT_BT_COEX;
 
 	if (link->signal <
@@ -1046,41 +1041,30 @@ static void iwl_mld_emlsr_check_bt_iter(void *_data, u8 *mac,
 					struct ieee80211_vif *vif)
 {
 	struct iwl_mld_vif *mld_vif = iwl_mld_vif_from_mac80211(vif);
-	const struct iwl_bt_coex_profile_notif zero_notif = {};
 	struct iwl_mld *mld = mld_vif->mld;
 	struct ieee80211_bss_conf *link;
 	unsigned int link_id;
-	const struct iwl_bt_coex_profile_notif *notif = &mld->last_bt_notif;
 
 	if (!iwl_mld_vif_has_emlsr_cap(vif))
 		return;
 
-	/* zeroed structure means that BT is OFF */
-	if (!memcmp(notif, &zero_notif, sizeof(*notif))) {
+	if (!mld->bt_is_active) {
 		iwl_mld_retry_emlsr(mld, vif);
 		return;
 	}
 
-	for_each_vif_active_link(vif, link, link_id) {
-		bool emlsr_active, emlsr_allowed;
+	/* BT is turned ON but we are not in EMLSR, nothing to do */
+	if (!iwl_mld_emlsr_active(vif))
+		return;
 
-		if (WARN_ON(!link->chanreq.oper.chan))
-			continue;
+	/* In EMLSR and BT is turned ON */
 
-		if (link->chanreq.oper.chan->band != NL80211_BAND_2GHZ)
+	for_each_vif_active_link(vif, link, link_id) {
+		if (WARN_ON(!link->chanreq.oper.chan))
 			continue;
 
-		emlsr_active = iwl_mld_emlsr_active(vif);
-		emlsr_allowed = iwl_mld_bt_allows_emlsr(mld, link,
-							!emlsr_active);
-		if (emlsr_allowed && !emlsr_active) {
-			iwl_mld_retry_emlsr(mld, vif);
-			return;
-		}
-
-		if (!emlsr_allowed && emlsr_active) {
-			iwl_mld_exit_emlsr(mld, vif,
-					   IWL_MLD_EMLSR_EXIT_BT_COEX,
+		if (link->chanreq.oper.chan->band == NL80211_BAND_2GHZ) {
+			iwl_mld_exit_emlsr(mld, vif, IWL_MLD_EMLSR_EXIT_BT_COEX,
 					   iwl_mld_get_primary_link(vif));
 			return;
 		}
@@ -1167,8 +1151,8 @@ void iwl_mld_retry_emlsr(struct iwl_mld *mld, struct ieee80211_vif *vif)
 {
 	struct iwl_mld_vif *mld_vif = iwl_mld_vif_from_mac80211(vif);
 
-	if (!iwl_mld_vif_has_emlsr_cap(vif) || iwl_mld_emlsr_active(vif) ||
-	    mld_vif->emlsr.blocked_reasons)
+	if (!IWL_MLD_AUTO_EML_ENABLE || !iwl_mld_vif_has_emlsr_cap(vif) ||
+	    iwl_mld_emlsr_active(vif) || mld_vif->emlsr.blocked_reasons)
 		return;
 
 	iwl_mld_int_mlo_scan(mld, vif);