iwlwifi: Read the correct addresses when getting the crf id

The original implementation checked the HW family, and as a result
of that used different addresses for the prph registers.

The old HWs addresses start with 0xa****** and the newer
ones start with 0xd******.

For this there are iwl_read/write_umac_prph functions that just add the

diff in the address automatically (in this case 0x300000), so the code will
be common for all HWs

In the original implementation the address given already had the 0xd******
causing the address to become 0x10***** (after adding the offset)

Change the registers to start with 0xa*****.

Signed-off-by: Matti Gottlieb <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211210090244.db2722547eb2.I03dce63698befc2fd9105111c3015b8d6e36868a@changeid
Signed-off-by: Luca Coelho <[email protected]>

1 files changed, 1 insertions, 1 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
index a373a2bc964a..483b1446f2e6 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
+++ b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
@@ -2110,7 +2110,7 @@ static u32 iwl_dump_ini_info(struct iwl_fw_runtime *fwrt,
 	 */
 	hw_type = CSR_HW_REV_TYPE(fwrt->trans->hw_rev);
 	if (hw_type == IWL_AX210_HW_TYPE) {
-		u32 prph_val = iwl_read_prph(fwrt->trans, WFPM_OTP_CFG1_ADDR_GEN2);
+		u32 prph_val = iwl_read_umac_prph(fwrt->trans, WFPM_OTP_CFG1_ADDR);
 		u32 is_jacket = !!(prph_val & WFPM_OTP_CFG1_IS_JACKET_BIT);
 		u32 is_cdb = !!(prph_val & WFPM_OTP_CFG1_IS_CDB_BIT);
 		u32 masked_bits = is_jacket | (is_cdb << 1);