Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

1 files changed, 271 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/libeth/xsk.c b/drivers/net/ethernet/intel/libeth/xsk.c
new file mode 100644
index 000000000000..846e902e31b6
--- /dev/null
+++ b/drivers/net/ethernet/intel/libeth/xsk.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (C) 2025 Intel Corporation */
+
+#define DEFAULT_SYMBOL_NAMESPACE	"LIBETH_XDP"
+
+#include <linux/export.h>
+
+#include <net/libeth/xsk.h>
+
+#include "priv.h"
+
+/* ``XDP_TX`` bulking */
+
+void __cold libeth_xsk_tx_return_bulk(const struct libeth_xdp_tx_frame *bq,
+				      u32 count)
+{
+	for (u32 i = 0; i < count; i++)
+		libeth_xsk_buff_free_slow(bq[i].xsk);
+}
+
+/* XSk TMO */
+
+const struct xsk_tx_metadata_ops libeth_xsktmo_slow = {
+	.tmo_request_checksum		= libeth_xsktmo_req_csum,
+};
+
+/* Rx polling path */
+
+/**
+ * libeth_xsk_buff_free_slow - free an XSk Rx buffer
+ * @xdp: buffer to free
+ *
+ * Slowpath version of xsk_buff_free() to be used on exceptions, cleanups etc.
+ * to avoid unwanted inlining.
+ */
+void libeth_xsk_buff_free_slow(struct libeth_xdp_buff *xdp)
+{
+	xsk_buff_free(&xdp->base);
+}
+EXPORT_SYMBOL_GPL(libeth_xsk_buff_free_slow);
+
+/**
+ * libeth_xsk_buff_add_frag - add frag to XSk Rx buffer
+ * @head: head buffer
+ * @xdp: frag buffer
+ *
+ * External helper used by libeth_xsk_process_buff(), do not call directly.
+ * Frees both main and frag buffers on error.
+ *
+ * Return: main buffer with attached frag on success, %NULL on error (no space
+ * for a new frag).
+ */
+struct libeth_xdp_buff *libeth_xsk_buff_add_frag(struct libeth_xdp_buff *head,
+						 struct libeth_xdp_buff *xdp)
+{
+	if (!xsk_buff_add_frag(&head->base, &xdp->base))
+		goto free;
+
+	return head;
+
+free:
+	libeth_xsk_buff_free_slow(xdp);
+	libeth_xsk_buff_free_slow(head);
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(libeth_xsk_buff_add_frag);
+
+/**
+ * libeth_xsk_buff_stats_frags - update onstack RQ stats with XSk frags info
+ * @rs: onstack stats to update
+ * @xdp: buffer to account
+ *
+ * External helper used by __libeth_xsk_run_pass(), do not call directly.
+ * Adds buffer's frags count and total len to the onstack stats.
+ */
+void libeth_xsk_buff_stats_frags(struct libeth_rq_napi_stats *rs,
+				 const struct libeth_xdp_buff *xdp)
+{
+	libeth_xdp_buff_stats_frags(rs, xdp);
+}
+EXPORT_SYMBOL_GPL(libeth_xsk_buff_stats_frags);
+
+/**
+ * __libeth_xsk_run_prog_slow - process the non-``XDP_REDIRECT`` verdicts
+ * @xdp: buffer to process
+ * @bq: Tx bulk for queueing on ``XDP_TX``
+ * @act: verdict to process
+ * @ret: error code if ``XDP_REDIRECT`` failed
+ *
+ * External helper used by __libeth_xsk_run_prog(), do not call directly.
+ * ``XDP_REDIRECT`` is the most common and hottest verdict on XSk, thus
+ * it is processed inline. The rest goes here for out-of-line processing,
+ * together with redirect errors.
+ *
+ * Return: libeth_xdp XDP prog verdict.
+ */
+u32 __libeth_xsk_run_prog_slow(struct libeth_xdp_buff *xdp,
+			       const struct libeth_xdp_tx_bulk *bq,
+			       enum xdp_action act, int ret)
+{
+	switch (act) {
+	case XDP_DROP:
+		xsk_buff_free(&xdp->base);
+
+		return LIBETH_XDP_DROP;
+	case XDP_TX:
+		return LIBETH_XDP_TX;
+	case XDP_PASS:
+		return LIBETH_XDP_PASS;
+	default:
+		break;
+	}
+
+	return libeth_xdp_prog_exception(bq, xdp, act, ret);
+}
+EXPORT_SYMBOL_GPL(__libeth_xsk_run_prog_slow);
+
+/**
+ * libeth_xsk_prog_exception - handle XDP prog exceptions on XSk
+ * @xdp: buffer to process
+ * @act: verdict returned by the prog
+ * @ret: error code if ``XDP_REDIRECT`` failed
+ *
+ * Internal. Frees the buffer and, if the queue uses XSk wakeups, stop the
+ * current NAPI poll when there are no free buffers left.
+ *
+ * Return: libeth_xdp's XDP prog verdict.
+ */
+u32 __cold libeth_xsk_prog_exception(struct libeth_xdp_buff *xdp,
+				     enum xdp_action act, int ret)
+{
+	const struct xdp_buff_xsk *xsk;
+	u32 __ret = LIBETH_XDP_DROP;
+
+	if (act != XDP_REDIRECT)
+		goto drop;
+
+	xsk = container_of(&xdp->base, typeof(*xsk), xdp);
+	if (xsk_uses_need_wakeup(xsk->pool) && ret == -ENOBUFS)
+		__ret = LIBETH_XDP_ABORTED;
+
+drop:
+	libeth_xsk_buff_free_slow(xdp);
+
+	return __ret;
+}
+
+/* Refill */
+
+/**
+ * libeth_xskfq_create - create an XSkFQ
+ * @fq: fill queue to initialize
+ *
+ * Allocates the FQEs and initializes the fields used by libeth_xdp: number
+ * of buffers to refill, refill threshold and buffer len.
+ *
+ * Return: %0 on success, -errno otherwise.
+ */
+int libeth_xskfq_create(struct libeth_xskfq *fq)
+{
+	fq->fqes = kvcalloc_node(fq->count, sizeof(*fq->fqes), GFP_KERNEL,
+				 fq->nid);
+	if (!fq->fqes)
+		return -ENOMEM;
+
+	fq->pending = fq->count;
+	fq->thresh = libeth_xdp_queue_threshold(fq->count);
+	fq->buf_len = xsk_pool_get_rx_frame_size(fq->pool);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(libeth_xskfq_create);
+
+/**
+ * libeth_xskfq_destroy - destroy an XSkFQ
+ * @fq: fill queue to destroy
+ *
+ * Zeroes the used fields and frees the FQEs array.
+ */
+void libeth_xskfq_destroy(struct libeth_xskfq *fq)
+{
+	fq->buf_len = 0;
+	fq->thresh = 0;
+	fq->pending = 0;
+
+	kvfree(fq->fqes);
+}
+EXPORT_SYMBOL_GPL(libeth_xskfq_destroy);
+
+/* .ndo_xsk_wakeup */
+
+static void libeth_xsk_napi_sched(void *info)
+{
+	__napi_schedule_irqoff(info);
+}
+
+/**
+ * libeth_xsk_init_wakeup - initialize libeth XSk wakeup structure
+ * @csd: struct to initialize
+ * @napi: NAPI corresponding to this queue
+ *
+ * libeth_xdp uses inter-processor interrupts to perform XSk wakeups. In order
+ * to do that, the corresponding CSDs must be initialized when creating the
+ * queues.
+ */
+void libeth_xsk_init_wakeup(call_single_data_t *csd, struct napi_struct *napi)
+{
+	INIT_CSD(csd, libeth_xsk_napi_sched, napi);
+}
+EXPORT_SYMBOL_GPL(libeth_xsk_init_wakeup);
+
+/**
+ * libeth_xsk_wakeup - perform an XSk wakeup
+ * @csd: CSD corresponding to the queue
+ * @qid: the stack queue index
+ *
+ * Try to mark the NAPI as missed first, so that it could be rescheduled.
+ * If it's not, schedule it on the corresponding CPU using IPIs (or directly
+ * if already running on it).
+ */
+void libeth_xsk_wakeup(call_single_data_t *csd, u32 qid)
+{
+	struct napi_struct *napi = csd->info;
+
+	if (napi_if_scheduled_mark_missed(napi) ||
+	    unlikely(!napi_schedule_prep(napi)))
+		return;
+
+	if (unlikely(qid >= nr_cpu_ids))
+		qid %= nr_cpu_ids;
+
+	if (qid != raw_smp_processor_id() && cpu_online(qid))
+		smp_call_function_single_async(qid, csd);
+	else
+		__napi_schedule(napi);
+}
+EXPORT_SYMBOL_GPL(libeth_xsk_wakeup);
+
+/* Pool setup */
+
+#define LIBETH_XSK_DMA_ATTR					\
+	(DMA_ATTR_WEAK_ORDERING | DMA_ATTR_SKIP_CPU_SYNC)
+
+/**
+ * libeth_xsk_setup_pool - setup or destroy an XSk pool for a queue
+ * @dev: target &net_device
+ * @qid: stack queue index to configure
+ * @enable: whether to enable or disable the pool
+ *
+ * Check that @qid is valid and then map or unmap the pool.
+ *
+ * Return: %0 on success, -errno otherwise.
+ */
+int libeth_xsk_setup_pool(struct net_device *dev, u32 qid, bool enable)
+{
+	struct xsk_buff_pool *pool;
+
+	pool = xsk_get_pool_from_qid(dev, qid);
+	if (!pool)
+		return -EINVAL;
+
+	if (enable)
+		return xsk_pool_dma_map(pool, dev->dev.parent,
+					LIBETH_XSK_DMA_ATTR);
+	else
+		xsk_pool_dma_unmap(pool, LIBETH_XSK_DMA_ATTR);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(libeth_xsk_setup_pool);