Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

1 files changed, 451 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/libeth/xdp.c b/drivers/net/ethernet/intel/libeth/xdp.c
new file mode 100644
index 000000000000..d4ac027d9584
--- /dev/null
+++ b/drivers/net/ethernet/intel/libeth/xdp.c
@@ -0,0 +1,451 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (C) 2025 Intel Corporation */
+
+#define DEFAULT_SYMBOL_NAMESPACE	"LIBETH_XDP"
+
+#include <linux/export.h>
+
+#include <net/libeth/xdp.h>
+
+#include "priv.h"
+
+/* XDPSQ sharing */
+
+DEFINE_STATIC_KEY_FALSE(libeth_xdpsq_share);
+EXPORT_SYMBOL_GPL(libeth_xdpsq_share);
+
+void __libeth_xdpsq_get(struct libeth_xdpsq_lock *lock,
+			const struct net_device *dev)
+{
+	bool warn;
+
+	spin_lock_init(&lock->lock);
+	lock->share = true;
+
+	warn = !static_key_enabled(&libeth_xdpsq_share);
+	static_branch_inc(&libeth_xdpsq_share);
+
+	if (warn && net_ratelimit())
+		netdev_warn(dev, "XDPSQ sharing enabled, possible XDP Tx slowdown\n");
+}
+EXPORT_SYMBOL_GPL(__libeth_xdpsq_get);
+
+void __libeth_xdpsq_put(struct libeth_xdpsq_lock *lock,
+			const struct net_device *dev)
+{
+	static_branch_dec(&libeth_xdpsq_share);
+
+	if (!static_key_enabled(&libeth_xdpsq_share) && net_ratelimit())
+		netdev_notice(dev, "XDPSQ sharing disabled\n");
+
+	lock->share = false;
+}
+EXPORT_SYMBOL_GPL(__libeth_xdpsq_put);
+
+void __acquires(&lock->lock)
+__libeth_xdpsq_lock(struct libeth_xdpsq_lock *lock)
+{
+	spin_lock(&lock->lock);
+}
+EXPORT_SYMBOL_GPL(__libeth_xdpsq_lock);
+
+void __releases(&lock->lock)
+__libeth_xdpsq_unlock(struct libeth_xdpsq_lock *lock)
+{
+	spin_unlock(&lock->lock);
+}
+EXPORT_SYMBOL_GPL(__libeth_xdpsq_unlock);
+
+/* XDPSQ clean-up timers */
+
+/**
+ * libeth_xdpsq_init_timer - initialize an XDPSQ clean-up timer
+ * @timer: timer to initialize
+ * @xdpsq: queue this timer belongs to
+ * @lock: corresponding XDPSQ lock
+ * @poll: queue polling/completion function
+ *
+ * XDPSQ clean-up timers must be set up before using at the queue configuration
+ * time. Set the required pointers and the cleaning callback.
+ */
+void libeth_xdpsq_init_timer(struct libeth_xdpsq_timer *timer, void *xdpsq,
+			     struct libeth_xdpsq_lock *lock,
+			     void (*poll)(struct work_struct *work))
+{
+	timer->xdpsq = xdpsq;
+	timer->lock = lock;
+
+	INIT_DELAYED_WORK(&timer->dwork, poll);
+}
+EXPORT_SYMBOL_GPL(libeth_xdpsq_init_timer);
+
+/* ``XDP_TX`` bulking */
+
+static void __cold
+libeth_xdp_tx_return_one(const struct libeth_xdp_tx_frame *frm)
+{
+	if (frm->len_fl & LIBETH_XDP_TX_MULTI)
+		libeth_xdp_return_frags(frm->data + frm->soff, true);
+
+	libeth_xdp_return_va(frm->data, true);
+}
+
+static void __cold
+libeth_xdp_tx_return_bulk(const struct libeth_xdp_tx_frame *bq, u32 count)
+{
+	for (u32 i = 0; i < count; i++) {
+		const struct libeth_xdp_tx_frame *frm = &bq[i];
+
+		if (!(frm->len_fl & LIBETH_XDP_TX_FIRST))
+			continue;
+
+		libeth_xdp_tx_return_one(frm);
+	}
+}
+
+static void __cold libeth_trace_xdp_exception(const struct net_device *dev,
+					      const struct bpf_prog *prog,
+					      u32 act)
+{
+	trace_xdp_exception(dev, prog, act);
+}
+
+/**
+ * libeth_xdp_tx_exception - handle Tx exceptions of XDP frames
+ * @bq: XDP Tx frame bulk
+ * @sent: number of frames sent successfully (from this bulk)
+ * @flags: internal libeth_xdp flags (XSk, .ndo_xdp_xmit etc.)
+ *
+ * Cold helper used by __libeth_xdp_tx_flush_bulk(), do not call directly.
+ * Reports XDP Tx exceptions, frees the frames that won't be sent or adjust
+ * the Tx bulk to try again later.
+ */
+void __cold libeth_xdp_tx_exception(struct libeth_xdp_tx_bulk *bq, u32 sent,
+				    u32 flags)
+{
+	const struct libeth_xdp_tx_frame *pos = &bq->bulk[sent];
+	u32 left = bq->count - sent;
+
+	if (!(flags & LIBETH_XDP_TX_NDO))
+		libeth_trace_xdp_exception(bq->dev, bq->prog, XDP_TX);
+
+	if (!(flags & LIBETH_XDP_TX_DROP)) {
+		memmove(bq->bulk, pos, left * sizeof(*bq->bulk));
+		bq->count = left;
+
+		return;
+	}
+
+	if (flags & LIBETH_XDP_TX_XSK)
+		libeth_xsk_tx_return_bulk(pos, left);
+	else if (!(flags & LIBETH_XDP_TX_NDO))
+		libeth_xdp_tx_return_bulk(pos, left);
+	else
+		libeth_xdp_xmit_return_bulk(pos, left, bq->dev);
+
+	bq->count = 0;
+}
+EXPORT_SYMBOL_GPL(libeth_xdp_tx_exception);
+
+/* .ndo_xdp_xmit() implementation */
+
+u32 __cold libeth_xdp_xmit_return_bulk(const struct libeth_xdp_tx_frame *bq,
+				       u32 count, const struct net_device *dev)
+{
+	u32 n = 0;
+
+	for (u32 i = 0; i < count; i++) {
+		const struct libeth_xdp_tx_frame *frm = &bq[i];
+		dma_addr_t dma;
+
+		if (frm->flags & LIBETH_XDP_TX_FIRST)
+			dma = *libeth_xdp_xmit_frame_dma(frm->xdpf);
+		else
+			dma = dma_unmap_addr(frm, dma);
+
+		dma_unmap_page(dev->dev.parent, dma, dma_unmap_len(frm, len),
+			       DMA_TO_DEVICE);
+
+		/* Actual xdp_frames are freed by the core */
+		n += !!(frm->flags & LIBETH_XDP_TX_FIRST);
+	}
+
+	return n;
+}
+EXPORT_SYMBOL_GPL(libeth_xdp_xmit_return_bulk);
+
+/* Rx polling path */
+
+/**
+ * libeth_xdp_load_stash - recreate an &xdp_buff from libeth_xdp buffer stash
+ * @dst: target &libeth_xdp_buff to initialize
+ * @src: source stash
+ *
+ * External helper used by libeth_xdp_init_buff(), do not call directly.
+ * Recreate an onstack &libeth_xdp_buff using the stash saved earlier.
+ * The only field untouched (rxq) is initialized later in the
+ * abovementioned function.
+ */
+void libeth_xdp_load_stash(struct libeth_xdp_buff *dst,
+			   const struct libeth_xdp_buff_stash *src)
+{
+	dst->data = src->data;
+	dst->base.data_end = src->data + src->len;
+	dst->base.data_meta = src->data;
+	dst->base.data_hard_start = src->data - src->headroom;
+
+	dst->base.frame_sz = src->frame_sz;
+	dst->base.flags = src->flags;
+}
+EXPORT_SYMBOL_GPL(libeth_xdp_load_stash);
+
+/**
+ * libeth_xdp_save_stash - convert &xdp_buff to a libeth_xdp buffer stash
+ * @dst: target &libeth_xdp_buff_stash to initialize
+ * @src: source XDP buffer
+ *
+ * External helper used by libeth_xdp_save_buff(), do not call directly.
+ * Use the fields from the passed XDP buffer to initialize the stash on the
+ * queue, so that a partially received frame can be finished later during
+ * the next NAPI poll.
+ */
+void libeth_xdp_save_stash(struct libeth_xdp_buff_stash *dst,
+			   const struct libeth_xdp_buff *src)
+{
+	dst->data = src->data;
+	dst->headroom = src->data - src->base.data_hard_start;
+	dst->len = src->base.data_end - src->data;
+
+	dst->frame_sz = src->base.frame_sz;
+	dst->flags = src->base.flags;
+
+	WARN_ON_ONCE(dst->flags != src->base.flags);
+}
+EXPORT_SYMBOL_GPL(libeth_xdp_save_stash);
+
+void __libeth_xdp_return_stash(struct libeth_xdp_buff_stash *stash)
+{
+	LIBETH_XDP_ONSTACK_BUFF(xdp);
+
+	libeth_xdp_load_stash(xdp, stash);
+	libeth_xdp_return_buff_slow(xdp);
+
+	stash->data = NULL;
+}
+EXPORT_SYMBOL_GPL(__libeth_xdp_return_stash);
+
+/**
+ * libeth_xdp_return_buff_slow - free &libeth_xdp_buff
+ * @xdp: buffer to free/return
+ *
+ * Slowpath version of libeth_xdp_return_buff() to be called on exceptions,
+ * queue clean-ups etc., without unwanted inlining.
+ */
+void __cold libeth_xdp_return_buff_slow(struct libeth_xdp_buff *xdp)
+{
+	__libeth_xdp_return_buff(xdp, false);
+}
+EXPORT_SYMBOL_GPL(libeth_xdp_return_buff_slow);
+
+/**
+ * libeth_xdp_buff_add_frag - add frag to XDP buffer
+ * @xdp: head XDP buffer
+ * @fqe: Rx buffer containing the frag
+ * @len: frag length reported by HW
+ *
+ * External helper used by libeth_xdp_process_buff(), do not call directly.
+ * Frees both head and frag buffers on error.
+ *
+ * Return: true success, false on error (no space for a new frag).
+ */
+bool libeth_xdp_buff_add_frag(struct libeth_xdp_buff *xdp,
+			      const struct libeth_fqe *fqe,
+			      u32 len)
+{
+	netmem_ref netmem = fqe->netmem;
+
+	if (!xdp_buff_add_frag(&xdp->base, netmem,
+			       fqe->offset + netmem_get_pp(netmem)->p.offset,
+			       len, fqe->truesize))
+		goto recycle;
+
+	return true;
+
+recycle:
+	libeth_rx_recycle_slow(netmem);
+	libeth_xdp_return_buff_slow(xdp);
+
+	return false;
+}
+EXPORT_SYMBOL_GPL(libeth_xdp_buff_add_frag);
+
+/**
+ * libeth_xdp_prog_exception - handle XDP prog exceptions
+ * @bq: XDP Tx bulk
+ * @xdp: buffer to process
+ * @act: original XDP prog verdict
+ * @ret: error code if redirect failed
+ *
+ * External helper used by __libeth_xdp_run_prog() and
+ * __libeth_xsk_run_prog_slow(), do not call directly.
+ * Reports invalid @act, XDP exception trace event and frees the buffer.
+ *
+ * Return: libeth_xdp XDP prog verdict.
+ */
+u32 __cold libeth_xdp_prog_exception(const struct libeth_xdp_tx_bulk *bq,
+				     struct libeth_xdp_buff *xdp,
+				     enum xdp_action act, int ret)
+{
+	if (act > XDP_REDIRECT)
+		bpf_warn_invalid_xdp_action(bq->dev, bq->prog, act);
+
+	libeth_trace_xdp_exception(bq->dev, bq->prog, act);
+
+	if (xdp->base.rxq->mem.type == MEM_TYPE_XSK_BUFF_POOL)
+		return libeth_xsk_prog_exception(xdp, act, ret);
+
+	libeth_xdp_return_buff_slow(xdp);
+
+	return LIBETH_XDP_DROP;
+}
+EXPORT_SYMBOL_GPL(libeth_xdp_prog_exception);
+
+/* Tx buffer completion */
+
+static void libeth_xdp_put_netmem_bulk(netmem_ref netmem,
+				       struct xdp_frame_bulk *bq)
+{
+	if (unlikely(bq->count == XDP_BULK_QUEUE_SIZE))
+		xdp_flush_frame_bulk(bq);
+
+	bq->q[bq->count++] = netmem;
+}
+
+/**
+ * libeth_xdp_return_buff_bulk - free &xdp_buff as part of a bulk
+ * @sinfo: shared info corresponding to the buffer
+ * @bq: XDP frame bulk to store the buffer
+ * @frags: whether the buffer has frags
+ *
+ * Same as xdp_return_frame_bulk(), but for &libeth_xdp_buff, speeds up Tx
+ * completion of ``XDP_TX`` buffers and allows to free them in same bulks
+ * with &xdp_frame buffers.
+ */
+void libeth_xdp_return_buff_bulk(const struct skb_shared_info *sinfo,
+				 struct xdp_frame_bulk *bq, bool frags)
+{
+	if (!frags)
+		goto head;
+
+	for (u32 i = 0; i < sinfo->nr_frags; i++)
+		libeth_xdp_put_netmem_bulk(skb_frag_netmem(&sinfo->frags[i]),
+					   bq);
+
+head:
+	libeth_xdp_put_netmem_bulk(virt_to_netmem(sinfo), bq);
+}
+EXPORT_SYMBOL_GPL(libeth_xdp_return_buff_bulk);
+
+/* Misc */
+
+/**
+ * libeth_xdp_queue_threshold - calculate XDP queue clean/refill threshold
+ * @count: number of descriptors in the queue
+ *
+ * The threshold is the limit at which RQs start to refill (when the number of
+ * empty buffers exceeds it) and SQs get cleaned up (when the number of free
+ * descriptors goes below it). To speed up hotpath processing, threshold is
+ * always pow-2, closest to 1/4 of the queue length.
+ * Don't call it on hotpath, calculate and cache the threshold during the
+ * queue initialization.
+ *
+ * Return: the calculated threshold.
+ */
+u32 libeth_xdp_queue_threshold(u32 count)
+{
+	u32 quarter, low, high;
+
+	if (likely(is_power_of_2(count)))
+		return count >> 2;
+
+	quarter = DIV_ROUND_CLOSEST(count, 4);
+	low = rounddown_pow_of_two(quarter);
+	high = roundup_pow_of_two(quarter);
+
+	return high - quarter <= quarter - low ? high : low;
+}
+EXPORT_SYMBOL_GPL(libeth_xdp_queue_threshold);
+
+/**
+ * __libeth_xdp_set_features - set XDP features for netdev
+ * @dev: &net_device to configure
+ * @xmo: XDP metadata ops (Rx hints)
+ * @zc_segs: maximum number of S/G frags the HW can transmit
+ * @tmo: XSk Tx metadata ops (Tx hints)
+ *
+ * Set all the features libeth_xdp supports. Only the first argument is
+ * necessary; without the third one (zero), XSk support won't be advertised.
+ * Use the non-underscored versions in drivers instead.
+ */
+void __libeth_xdp_set_features(struct net_device *dev,
+			       const struct xdp_metadata_ops *xmo,
+			       u32 zc_segs,
+			       const struct xsk_tx_metadata_ops *tmo)
+{
+	xdp_set_features_flag(dev,
+			      NETDEV_XDP_ACT_BASIC |
+			      NETDEV_XDP_ACT_REDIRECT |
+			      NETDEV_XDP_ACT_NDO_XMIT |
+			      (zc_segs ? NETDEV_XDP_ACT_XSK_ZEROCOPY : 0) |
+			      NETDEV_XDP_ACT_RX_SG |
+			      NETDEV_XDP_ACT_NDO_XMIT_SG);
+	dev->xdp_metadata_ops = xmo;
+
+	tmo = tmo == libeth_xsktmo ? &libeth_xsktmo_slow : tmo;
+
+	dev->xdp_zc_max_segs = zc_segs ? : 1;
+	dev->xsk_tx_metadata_ops = zc_segs ? tmo : NULL;
+}
+EXPORT_SYMBOL_GPL(__libeth_xdp_set_features);
+
+/**
+ * libeth_xdp_set_redirect - toggle the XDP redirect feature
+ * @dev: &net_device to configure
+ * @enable: whether XDP is enabled
+ *
+ * Use this when XDPSQs are not always available to dynamically enable
+ * and disable redirect feature.
+ */
+void libeth_xdp_set_redirect(struct net_device *dev, bool enable)
+{
+	if (enable)
+		xdp_features_set_redirect_target(dev, true);
+	else
+		xdp_features_clear_redirect_target(dev);
+}
+EXPORT_SYMBOL_GPL(libeth_xdp_set_redirect);
+
+/* Module */
+
+static const struct libeth_xdp_ops xdp_ops __initconst = {
+	.bulk	= libeth_xdp_return_buff_bulk,
+	.xsk	= libeth_xsk_buff_free_slow,
+};
+
+static int __init libeth_xdp_module_init(void)
+{
+	libeth_attach_xdp(&xdp_ops);
+
+	return 0;
+}
+module_init(libeth_xdp_module_init);
+
+static void __exit libeth_xdp_module_exit(void)
+{
+	libeth_detach_xdp();
+}
+module_exit(libeth_xdp_module_exit);
+
+MODULE_DESCRIPTION("Common Ethernet library - XDP infra");
+MODULE_IMPORT_NS("LIBETH");
+MODULE_LICENSE("GPL");