aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
diff options
context:
space:
mode:
authorKarol Kolacinski <[email protected]>2024-09-30 12:12:38 +0000
committerTony Nguyen <[email protected]>2025-02-10 16:52:04 +0000
commite2c6737e6e82e9991646cd5389391bb6d3572a68 (patch)
treed6f9851b51318cad2b8f5a9ddfed8c905cf146ad /drivers/net/ethernet/intel/ice/ice_ptp_hw.c
parentMerge branch 'eth-fbnic-support-rss-contexts-and-ntuple-filters' (diff)
downloadkernel-e2c6737e6e82e9991646cd5389391bb6d3572a68.tar.gz
kernel-e2c6737e6e82e9991646cd5389391bb6d3572a68.zip
ice: Don't check device type when checking GNSS presence
Don't check if the device type is E810T as non-E810T devices can support GNSS too and PCA9575 check is enough to determine if GNSS is present or not. Rename ice_gnss_is_gps_present() to ice_gnss_is_module_present() because GNSS module supports multiple GNSS providers, not only GPS. Move functions related to PCA9575 from ice_ptp_hw.c to ice_common.c to be able to access them when PTP is disabled in the kernel, but GNSS is enabled. Remove logical AND with ICE_AQC_LINK_TOPO_NODE_TYPE_M in ice_get_pca9575_handle(), which has no effect, and reorder device type checks to check the device_id first, then set other variables. Signed-off-by: Karol Kolacinski <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
Diffstat (limited to 'drivers/net/ethernet/intel/ice/ice_ptp_hw.c')
-rw-r--r--drivers/net/ethernet/intel/ice/ice_ptp_hw.c93
1 files changed, 0 insertions, 93 deletions
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
index ec91822e9280..53ce40fa2fe6 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
@@ -5316,68 +5316,6 @@ ice_get_phy_tx_tstamp_ready_e810(struct ice_hw *hw, u8 port, u64 *tstamp_ready)
*/
/**
- * ice_get_pca9575_handle
- * @hw: pointer to the hw struct
- * @pca9575_handle: GPIO controller's handle
- *
- * Find and return the GPIO controller's handle in the netlist.
- * When found - the value will be cached in the hw structure and following calls
- * will return cached value
- */
-static int
-ice_get_pca9575_handle(struct ice_hw *hw, u16 *pca9575_handle)
-{
- struct ice_aqc_get_link_topo *cmd;
- struct ice_aq_desc desc;
- int status;
- u8 idx;
-
- /* If handle was read previously return cached value */
- if (hw->io_expander_handle) {
- *pca9575_handle = hw->io_expander_handle;
- return 0;
- }
-
- /* If handle was not detected read it from the netlist */
- cmd = &desc.params.get_link_topo;
- ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_get_link_topo);
-
- /* Set node type to GPIO controller */
- cmd->addr.topo_params.node_type_ctx =
- (ICE_AQC_LINK_TOPO_NODE_TYPE_M &
- ICE_AQC_LINK_TOPO_NODE_TYPE_GPIO_CTRL);
-
-#define SW_PCA9575_SFP_TOPO_IDX 2
-#define SW_PCA9575_QSFP_TOPO_IDX 1
-
- /* Check if the SW IO expander controlling SMA exists in the netlist. */
- if (hw->device_id == ICE_DEV_ID_E810C_SFP)
- idx = SW_PCA9575_SFP_TOPO_IDX;
- else if (hw->device_id == ICE_DEV_ID_E810C_QSFP)
- idx = SW_PCA9575_QSFP_TOPO_IDX;
- else
- return -EOPNOTSUPP;
-
- cmd->addr.topo_params.index = idx;
-
- status = ice_aq_send_cmd(hw, &desc, NULL, 0, NULL);
- if (status)
- return -EOPNOTSUPP;
-
- /* Verify if we found the right IO expander type */
- if (desc.params.get_link_topo.node_part_num !=
- ICE_AQC_GET_LINK_TOPO_NODE_NR_PCA9575)
- return -EOPNOTSUPP;
-
- /* If present save the handle and return it */
- hw->io_expander_handle =
- le16_to_cpu(desc.params.get_link_topo.addr.handle);
- *pca9575_handle = hw->io_expander_handle;
-
- return 0;
-}
-
-/**
* ice_read_sma_ctrl
* @hw: pointer to the hw struct
* @data: pointer to data to be read from the GPIO controller
@@ -5442,37 +5380,6 @@ int ice_write_sma_ctrl(struct ice_hw *hw, u8 data)
}
/**
- * ice_read_pca9575_reg
- * @hw: pointer to the hw struct
- * @offset: GPIO controller register offset
- * @data: pointer to data to be read from the GPIO controller
- *
- * Read the register from the GPIO controller
- */
-int ice_read_pca9575_reg(struct ice_hw *hw, u8 offset, u8 *data)
-{
- struct ice_aqc_link_topo_addr link_topo;
- __le16 addr;
- u16 handle;
- int err;
-
- memset(&link_topo, 0, sizeof(link_topo));
-
- err = ice_get_pca9575_handle(hw, &handle);
- if (err)
- return err;
-
- link_topo.handle = cpu_to_le16(handle);
- link_topo.topo_params.node_type_ctx =
- FIELD_PREP(ICE_AQC_LINK_TOPO_NODE_CTX_M,
- ICE_AQC_LINK_TOPO_NODE_CTX_PROVIDED);
-
- addr = cpu_to_le16((u16)offset);
-
- return ice_aq_read_i2c(hw, link_topo, 0, addr, 1, data, NULL);
-}
-
-/**
* ice_ptp_read_sdp_ac - read SDP available connections section from NVM
* @hw: pointer to the HW struct
* @entries: returns the SDP available connections section from NVM