Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

1 files changed, 236 insertions, 73 deletions

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index dc2f4adac9bc..9942fb6f7f4b 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -361,18 +361,23 @@ static void b53_set_forwarding(struct b53_device *dev, int enable)
 
 	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
 
-	/* Include IMP port in dumb forwarding mode
-	 */
-	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
-	mgmt |= B53_MII_DUMB_FWDG_EN;
-	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
+	if (!is5325(dev)) {
+		/* Include IMP port in dumb forwarding mode */
+		b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
+		mgmt |= B53_MII_DUMB_FWDG_EN;
+		b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
 
-	/* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether
-	 * frames should be flooded or not.
-	 */
-	b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt);
-	mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IPMC_FWD_EN;
-	b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
+		/* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether
+		 * frames should be flooded or not.
+		 */
+		b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt);
+		mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IPMC_FWD_EN;
+		b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
+	} else {
+		b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt);
+		mgmt |= B53_IP_MCAST_25;
+		b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
+	}
 }
 
 static void b53_enable_vlan(struct b53_device *dev, int port, bool enable,
@@ -487,6 +492,9 @@ static int b53_flush_arl(struct b53_device *dev, u8 mask)
 {
 	unsigned int i;
 
+	if (is5325(dev))
+		return 0;
+
 	b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
 		   FAST_AGE_DONE | FAST_AGE_DYNAMIC | mask);
 
@@ -511,6 +519,9 @@ out:
 
 static int b53_fast_age_port(struct b53_device *dev, int port)
 {
+	if (is5325(dev))
+		return 0;
+
 	b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_PORT_CTRL, port);
 
 	return b53_flush_arl(dev, FAST_AGE_PORT);
@@ -518,6 +529,9 @@ static int b53_fast_age_port(struct b53_device *dev, int port)
 
 static int b53_fast_age_vlan(struct b53_device *dev, u16 vid)
 {
+	if (is5325(dev))
+		return 0;
+
 	b53_write16(dev, B53_CTRL_PAGE, B53_FAST_AGE_VID_CTRL, vid);
 
 	return b53_flush_arl(dev, FAST_AGE_VLAN);
@@ -529,6 +543,10 @@ void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
 	unsigned int i;
 	u16 pvlan;
 
+	/* BCM5325 CPU port is at 8 */
+	if ((is5325(dev) || is5365(dev)) && cpu_port == B53_CPU_PORT_25)
+		cpu_port = B53_CPU_PORT;
+
 	/* Enable the IMP port to be in the same VLAN as the other ports
 	 * on a per-port basis such that we only have Port i and IMP in
 	 * the same VLAN.
@@ -546,12 +564,24 @@ static void b53_port_set_ucast_flood(struct b53_device *dev, int port,
 {
 	u16 uc;
 
-	b53_read16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, &uc);
-	if (unicast)
-		uc |= BIT(port);
-	else
-		uc &= ~BIT(port);
-	b53_write16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, uc);
+	if (is5325(dev)) {
+		if (port == B53_CPU_PORT_25)
+			port = B53_CPU_PORT;
+
+		b53_read16(dev, B53_IEEE_PAGE, B53_IEEE_UCAST_DLF, &uc);
+		if (unicast)
+			uc |= BIT(port) | B53_IEEE_UCAST_DROP_EN;
+		else
+			uc &= ~BIT(port);
+		b53_write16(dev, B53_IEEE_PAGE, B53_IEEE_UCAST_DLF, uc);
+	} else {
+		b53_read16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, &uc);
+		if (unicast)
+			uc |= BIT(port);
+		else
+			uc &= ~BIT(port);
+		b53_write16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, uc);
+	}
 }
 
 static void b53_port_set_mcast_flood(struct b53_device *dev, int port,
@@ -559,19 +589,31 @@ static void b53_port_set_mcast_flood(struct b53_device *dev, int port,
 {
 	u16 mc;
 
-	b53_read16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, &mc);
-	if (multicast)
-		mc |= BIT(port);
-	else
-		mc &= ~BIT(port);
-	b53_write16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, mc);
+	if (is5325(dev)) {
+		if (port == B53_CPU_PORT_25)
+			port = B53_CPU_PORT;
 
-	b53_read16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, &mc);
-	if (multicast)
-		mc |= BIT(port);
-	else
-		mc &= ~BIT(port);
-	b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc);
+		b53_read16(dev, B53_IEEE_PAGE, B53_IEEE_MCAST_DLF, &mc);
+		if (multicast)
+			mc |= BIT(port) | B53_IEEE_MCAST_DROP_EN;
+		else
+			mc &= ~BIT(port);
+		b53_write16(dev, B53_IEEE_PAGE, B53_IEEE_MCAST_DLF, mc);
+	} else {
+		b53_read16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, &mc);
+		if (multicast)
+			mc |= BIT(port);
+		else
+			mc &= ~BIT(port);
+		b53_write16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, mc);
+
+		b53_read16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, &mc);
+		if (multicast)
+			mc |= BIT(port);
+		else
+			mc &= ~BIT(port);
+		b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc);
+	}
 }
 
 static void b53_port_set_learning(struct b53_device *dev, int port,
@@ -579,6 +621,9 @@ static void b53_port_set_learning(struct b53_device *dev, int port,
 {
 	u16 reg;
 
+	if (is5325(dev))
+		return;
+
 	b53_read16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, &reg);
 	if (learning)
 		reg &= ~BIT(port);
@@ -615,6 +660,19 @@ int b53_setup_port(struct dsa_switch *ds, int port)
 	if (dsa_is_user_port(ds, port))
 		b53_set_eap_mode(dev, port, EAP_MODE_SIMPLIFIED);
 
+	if (is5325(dev) &&
+	    in_range(port, 1, 4)) {
+		u8 reg;
+
+		b53_read8(dev, B53_CTRL_PAGE, B53_PD_MODE_CTRL_25, &reg);
+		reg &= ~PD_MODE_POWER_DOWN_PORT(0);
+		if (dsa_is_unused_port(ds, port))
+			reg |= PD_MODE_POWER_DOWN_PORT(port);
+		else
+			reg &= ~PD_MODE_POWER_DOWN_PORT(port);
+		b53_write8(dev, B53_CTRL_PAGE, B53_PD_MODE_CTRL_25, reg);
+	}
+
 	return 0;
 }
 EXPORT_SYMBOL(b53_setup_port);
@@ -631,6 +689,9 @@ int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
 
 	cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
 
+	if (dev->ops->phy_enable)
+		dev->ops->phy_enable(dev, port);
+
 	if (dev->ops->irq_enable)
 		ret = dev->ops->irq_enable(dev, port);
 	if (ret)
@@ -669,6 +730,9 @@ void b53_disable_port(struct dsa_switch *ds, int port)
 	reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE;
 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
 
+	if (dev->ops->phy_disable)
+		dev->ops->phy_disable(dev, port);
+
 	if (dev->ops->irq_disable)
 		dev->ops->irq_disable(dev, port);
 }
@@ -713,6 +777,11 @@ void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
 		hdr_ctl |= GC_FRM_MGMT_PORT_M;
 	b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, hdr_ctl);
 
+	/* B53_BRCM_HDR not present on devices with legacy tags */
+	if (dev->tag_protocol == DSA_TAG_PROTO_BRCM_LEGACY ||
+	    dev->tag_protocol == DSA_TAG_PROTO_BRCM_LEGACY_FCS)
+		return;
+
 	/* Enable Broadcom tags for IMP port */
 	b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl);
 	if (tag_en)
@@ -1257,6 +1326,8 @@ static void b53_force_link(struct b53_device *dev, int port, int link)
 	if (port == dev->imp_port) {
 		off = B53_PORT_OVERRIDE_CTRL;
 		val = PORT_OVERRIDE_EN;
+	} else if (is5325(dev)) {
+		return;
 	} else {
 		off = B53_GMII_PORT_OVERRIDE_CTRL(port);
 		val = GMII_PO_EN;
@@ -1281,6 +1352,8 @@ static void b53_force_port_config(struct b53_device *dev, int port,
 	if (port == dev->imp_port) {
 		off = B53_PORT_OVERRIDE_CTRL;
 		val = PORT_OVERRIDE_EN;
+	} else if (is5325(dev)) {
+		return;
 	} else {
 		off = B53_GMII_PORT_OVERRIDE_CTRL(port);
 		val = GMII_PO_EN;
@@ -1311,10 +1384,19 @@ static void b53_force_port_config(struct b53_device *dev, int port,
 		return;
 	}
 
-	if (rx_pause)
-		reg |= PORT_OVERRIDE_RX_FLOW;
-	if (tx_pause)
-		reg |= PORT_OVERRIDE_TX_FLOW;
+	if (rx_pause) {
+		if (is5325(dev))
+			reg |= PORT_OVERRIDE_LP_FLOW_25;
+		else
+			reg |= PORT_OVERRIDE_RX_FLOW;
+	}
+
+	if (tx_pause) {
+		if (is5325(dev))
+			reg |= PORT_OVERRIDE_LP_FLOW_25;
+		else
+			reg |= PORT_OVERRIDE_TX_FLOW;
+	}
 
 	b53_write8(dev, B53_CTRL_PAGE, off, reg);
 }
@@ -1328,7 +1410,7 @@ static void b53_adjust_63xx_rgmii(struct dsa_switch *ds, int port,
 	b53_read8(dev, B53_CTRL_PAGE, B53_RGMII_CTRL_P(port), &rgmii_ctrl);
 	rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC);
 
-	if (is63268(dev))
+	if (is6318_268(dev))
 		rgmii_ctrl |= RGMII_CTRL_MII_OVERRIDE;
 
 	rgmii_ctrl |= RGMII_CTRL_ENABLE_GMII;
@@ -1764,6 +1846,45 @@ static int b53_arl_read(struct b53_device *dev, u64 mac,
 	return *idx >= dev->num_arl_bins ? -ENOSPC : -ENOENT;
 }
 
+static int b53_arl_read_25(struct b53_device *dev, u64 mac,
+			   u16 vid, struct b53_arl_entry *ent, u8 *idx)
+{
+	DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES);
+	unsigned int i;
+	int ret;
+
+	ret = b53_arl_op_wait(dev);
+	if (ret)
+		return ret;
+
+	bitmap_zero(free_bins, dev->num_arl_bins);
+
+	/* Read the bins */
+	for (i = 0; i < dev->num_arl_bins; i++) {
+		u64 mac_vid;
+
+		b53_read64(dev, B53_ARLIO_PAGE,
+			   B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid);
+
+		b53_arl_to_entry_25(ent, mac_vid);
+
+		if (!(mac_vid & ARLTBL_VALID_25)) {
+			set_bit(i, free_bins);
+			continue;
+		}
+		if ((mac_vid & ARLTBL_MAC_MASK) != mac)
+			continue;
+		if (dev->vlan_enabled &&
+		    ((mac_vid >> ARLTBL_VID_S_65) & ARLTBL_VID_MASK_25) != vid)
+			continue;
+		*idx = i;
+		return 0;
+	}
+
+	*idx = find_first_bit(free_bins, dev->num_arl_bins);
+	return *idx >= dev->num_arl_bins ? -ENOSPC : -ENOENT;
+}
+
 static int b53_arl_op(struct b53_device *dev, int op, int port,
 		      const unsigned char *addr, u16 vid, bool is_valid)
 {
@@ -1778,14 +1899,18 @@ static int b53_arl_op(struct b53_device *dev, int op, int port,
 
 	/* Perform a read for the given MAC and VID */
 	b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac);
-	b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid);
+	if (!is5325m(dev))
+		b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid);
 
 	/* Issue a read operation for this MAC */
 	ret = b53_arl_rw_op(dev, 1);
 	if (ret)
 		return ret;
 
-	ret = b53_arl_read(dev, mac, vid, &ent, &idx);
+	if (is5325(dev) || is5365(dev))
+		ret = b53_arl_read_25(dev, mac, vid, &ent, &idx);
+	else
+		ret = b53_arl_read(dev, mac, vid, &ent, &idx);
 
 	/* If this is a read, just finish now */
 	if (op)
@@ -1829,12 +1954,17 @@ static int b53_arl_op(struct b53_device *dev, int op, int port,
 	ent.is_static = true;
 	ent.is_age = false;
 	memcpy(ent.mac, addr, ETH_ALEN);
-	b53_arl_from_entry(&mac_vid, &fwd_entry, &ent);
+	if (is5325(dev) || is5365(dev))
+		b53_arl_from_entry_25(&mac_vid, &ent);
+	else
+		b53_arl_from_entry(&mac_vid, &fwd_entry, &ent);
 
 	b53_write64(dev, B53_ARLIO_PAGE,
 		    B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid);
-	b53_write32(dev, B53_ARLIO_PAGE,
-		    B53_ARLTBL_DATA_ENTRY(idx), fwd_entry);
+
+	if (!is5325(dev) && !is5365(dev))
+		b53_write32(dev, B53_ARLIO_PAGE,
+			    B53_ARLTBL_DATA_ENTRY(idx), fwd_entry);
 
 	return b53_arl_rw_op(dev, 0);
 }
@@ -1846,12 +1976,6 @@ int b53_fdb_add(struct dsa_switch *ds, int port,
 	struct b53_device *priv = ds->priv;
 	int ret;
 
-	/* 5325 and 5365 require some more massaging, but could
-	 * be supported eventually
-	 */
-	if (is5325(priv) || is5365(priv))
-		return -EOPNOTSUPP;
-
 	mutex_lock(&priv->arl_mutex);
 	ret = b53_arl_op(priv, 0, port, addr, vid, true);
 	mutex_unlock(&priv->arl_mutex);
@@ -1878,10 +2002,15 @@ EXPORT_SYMBOL(b53_fdb_del);
 static int b53_arl_search_wait(struct b53_device *dev)
 {
 	unsigned int timeout = 1000;
-	u8 reg;
+	u8 reg, offset;
+
+	if (is5325(dev) || is5365(dev))
+		offset = B53_ARL_SRCH_CTL_25;
+	else
+		offset = B53_ARL_SRCH_CTL;
 
 	do {
-		b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, &reg);
+		b53_read8(dev, B53_ARLIO_PAGE, offset, &reg);
 		if (!(reg & ARL_SRCH_STDN))
 			return 0;
 
@@ -1898,13 +2027,24 @@ static void b53_arl_search_rd(struct b53_device *dev, u8 idx,
 			      struct b53_arl_entry *ent)
 {
 	u64 mac_vid;
-	u32 fwd_entry;
 
-	b53_read64(dev, B53_ARLIO_PAGE,
-		   B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid);
-	b53_read32(dev, B53_ARLIO_PAGE,
-		   B53_ARL_SRCH_RSTL(idx), &fwd_entry);
-	b53_arl_to_entry(ent, mac_vid, fwd_entry);
+	if (is5325(dev)) {
+		b53_read64(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSTL_0_MACVID_25,
+			   &mac_vid);
+		b53_arl_to_entry_25(ent, mac_vid);
+	} else if (is5365(dev)) {
+		b53_read64(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSTL_0_MACVID_65,
+			   &mac_vid);
+		b53_arl_to_entry_25(ent, mac_vid);
+	} else {
+		u32 fwd_entry;
+
+		b53_read64(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSTL_MACVID(idx),
+			   &mac_vid);
+		b53_read32(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSTL(idx),
+			   &fwd_entry);
+		b53_arl_to_entry(ent, mac_vid, fwd_entry);
+	}
 }
 
 static int b53_fdb_copy(int port, const struct b53_arl_entry *ent,
@@ -1925,14 +2065,20 @@ int b53_fdb_dump(struct dsa_switch *ds, int port,
 	struct b53_device *priv = ds->priv;
 	struct b53_arl_entry results[2];
 	unsigned int count = 0;
+	u8 offset;
 	int ret;
 	u8 reg;
 
 	mutex_lock(&priv->arl_mutex);
 
+	if (is5325(priv) || is5365(priv))
+		offset = B53_ARL_SRCH_CTL_25;
+	else
+		offset = B53_ARL_SRCH_CTL;
+
 	/* Start search operation */
 	reg = ARL_SRCH_STDN;
-	b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg);
+	b53_write8(priv, offset, B53_ARL_SRCH_CTL, reg);
 
 	do {
 		ret = b53_arl_search_wait(priv);
@@ -2165,7 +2311,13 @@ int b53_br_flags_pre(struct dsa_switch *ds, int port,
 		     struct switchdev_brport_flags flags,
 		     struct netlink_ext_ack *extack)
 {
-	if (flags.mask & ~(BR_FLOOD | BR_MCAST_FLOOD | BR_LEARNING))
+	struct b53_device *dev = ds->priv;
+	unsigned long mask = (BR_FLOOD | BR_MCAST_FLOOD);
+
+	if (!is5325(dev))
+		mask |= BR_LEARNING;
+
+	if (flags.mask & ~mask)
 		return -EINVAL;
 
 	return 0;
@@ -2241,8 +2393,11 @@ enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port,
 		goto out;
 	}
 
-	/* Older models require a different 6 byte tag */
-	if (is5325(dev) || is5365(dev) || is63xx(dev)) {
+	/* Older models require different 6 byte tags */
+	if (is5325(dev) || is5365(dev)) {
+		dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY_FCS;
+		goto out;
+	} else if (is63xx(dev)) {
 		dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY;
 		goto out;
 	}
@@ -2620,19 +2775,6 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
 	},
 	{
-		.chip_id = BCM63268_DEVICE_ID,
-		.dev_name = "BCM63268",
-		.vlans = 4096,
-		.enabled_ports = 0, /* pdata must provide them */
-		.arl_bins = 4,
-		.arl_buckets = 1024,
-		.imp_port = 8,
-		.vta_regs = B53_VTA_REGS_63XX,
-		.duplex_reg = B53_DUPLEX_STAT_63XX,
-		.jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
-		.jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
-	},
-	{
 		.chip_id = BCM53010_DEVICE_ID,
 		.dev_name = "BCM53010",
 		.vlans = 4096,
@@ -2781,13 +2923,17 @@ static const struct b53_chip_data b53_switch_chips[] = {
 
 static int b53_switch_init(struct b53_device *dev)
 {
+	u32 chip_id = dev->chip_id;
 	unsigned int i;
 	int ret;
 
+	if (is63xx(dev))
+		chip_id = BCM63XX_DEVICE_ID;
+
 	for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) {
 		const struct b53_chip_data *chip = &b53_switch_chips[i];
 
-		if (chip->chip_id == dev->chip_id) {
+		if (chip->chip_id == chip_id) {
 			if (!dev->enabled_ports)
 				dev->enabled_ports = chip->enabled_ports;
 			dev->name = chip->dev_name;
@@ -2830,6 +2976,9 @@ static int b53_switch_init(struct b53_device *dev)
 		}
 	}
 
+	if (is5325e(dev))
+		dev->num_arl_buckets = 512;
+
 	dev->num_ports = fls(dev->enabled_ports);
 
 	dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS);
@@ -2931,10 +3080,24 @@ int b53_switch_detect(struct b53_device *dev)
 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf);
 		b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp);
 
-		if (tmp == 0xf)
+		if (tmp == 0xf) {
+			u32 phy_id;
+			int val;
+
 			dev->chip_id = BCM5325_DEVICE_ID;
-		else
+
+			val = b53_phy_read16(dev->ds, 0, MII_PHYSID1);
+			phy_id = (val & 0xffff) << 16;
+			val = b53_phy_read16(dev->ds, 0, MII_PHYSID2);
+			phy_id |= (val & 0xfff0);
+
+			if (phy_id == 0x00406330)
+				dev->variant_id = B53_VARIANT_5325M;
+			else if (phy_id == 0x0143bc30)
+				dev->variant_id = B53_VARIANT_5325E;
+		} else {
 			dev->chip_id = BCM5365_DEVICE_ID;
+		}
 		break;
 	case BCM5389_DEVICE_ID:
 	case BCM5395_DEVICE_ID: