Merge tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This has two exciting community drivers for ARM Mali accelerators.
  Since ARM has never been open source friendly on the GPU side of the
  house, the community has had to create open source drivers for the
  Mali GPUs. Lima covers the older t4xx and panfrost the newer 6xx/7xx
  series. Well done to all involved and hopefully this will help ARM
  head in the right direction.

  There is also now the ability if you don't have any of the legacy
  drivers enabled (pre-KMS) to remove all the pre-KMS support code from
  the core drm, this saves 10% or so in codesize on my machine.

  i915 also enable Icelake/Elkhart Lake Gen11 GPUs by default, vboxvideo
  moves out of staging.

  There are also some rcar-du patches which crossover with media tree
  but all should be acked by Mauro.

  Summary:

  uapi changes:
   - Colorspace connector property
   - fourcc - new YUV formts
   - timeline sync objects initially merged
   - expose FB_DAMAGE_CLIPS to atomic userspace

  new drivers:
   - vboxvideo: moved out of staging
   - aspeed: ASPEED SoC BMC chip display support
   - lima: ARM Mali4xx GPU acceleration driver support
   - panfrost: ARM Mali6xx/7xx Midgard/Bitfrost acceleration driver support

  core:
   - component helper docs
   - unplugging fixes
   - devm device init
   - MIPI/DSI rate control
   - shmem backed gem objects
   - connector, display_info, edid_quirks cleanups
   - dma_buf fence chain support
   - 64-bit dma-fence seqno comparison fixes
   - move initial fb config code to core
   - gem fence array helpers for Lima
   - ability to remove legacy support code if no drivers requires it (removes 10% of drm.ko size)
   - lease fixes

  ttm:
   - unified DRM_FILE_PAGE_OFFSET handling
   - Account for kernel allocations in kernel zone only

  panel:
   - OSD070T1718-19TS panel support
   - panel-tpo-td028ttec1 backlight support
   - Ronbo RB070D30 MIPI/DSI
   - Feiyang FY07024DI26A30-D MIPI-DSI panel
   - Rocktech jh057n00900 MIPI-DSI panel

  i915:
   - Comet Lake (Gen9) PCI IDs
   - Updated Icelake PCI IDs
   - Elkhartlake (Gen11) support
   - DP MST property addtions
   - plane and watermark fixes
   - Icelake port sync and VEBOX disable fixes
   - struct_mutex usage reduction
   - Icelake gamma fix
   - GuC reset fixes
   - make mmap more asynchronous
   - sound display power well race fixes
   - DDI/MIPI-DSI clocks for Icelake
   - Icelake RPS frequency changing support
   - Icelake workarounds

  amdgpu:
   - Use HMM for userptr
   - vega20 experimental smu11 support
   - RAS support for vega20
   - BACO support for vega12 + fixes for vega20
   - reworked IH interrupt handling
   - amdkfd RAS support
   - Freesync improvements
   - initial timeline sync object support
   - DC Z ordering fixes
   - NV12 planes support
   - colorspace properties for planes=
   - eDP opts if eDP already initialized

  nouveau:
   - misc fixes

  etnaviv:
   - misc fixes

  msm:
   - GPU zap shader support expansion
   - robustness ABI addition

  exynos:
   - Logging cleanups

  tegra:
   - Shared reset fix
   - CPU cache maintenance fix

  cirrus:
   - driver rewritten using simple helpers

  meson:
   - G12A support

  vmwgfx:
   - Resource dirtying management improvements
   - Userspace logging improvements

  virtio:
   - PRIME fixes

  rockchip:
   - rk3066 hdmi support

  sun4i:
   - DSI burst mode support

  vc4:
   - load tracker to detect underflow

  v3d:
   - v3d v4.2 support

  malidp:
   - initial Mali D71 support in komeda driver

  tfp410:
   - omap related improvement

  omapdrm:
   - drm bridge/panel support
   - drop some omap specific panels

  rcar-du:
   - Display writeback support"

* tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm: (1507 commits)
  drm/msm/a6xx: No zap shader is not an error
  drm/cma-helper: Fix drm_gem_cma_free_object()
  drm: Fix timestamp docs for variable refresh properties.
  drm/komeda: Mark the local functions as static
  drm/komeda: Fixed warning: Function parameter or member not described
  drm/komeda: Expose bus_width to Komeda-CORE
  drm/komeda: Add sysfs attribute: core_id and config_id
  drm: add non-desktop quirk for Valve HMDs
  drm/panfrost: Show stored feature registers
  drm/panfrost: Don't scream about deferred probe
  drm/panfrost: Disable PM on probe failure
  drm/panfrost: Set DMA masks earlier
  drm/panfrost: Add sanity checks to submit IOCTL
  drm/etnaviv: initialize idle mask before querying the HW db
  drm: introduce a capability flag for syncobj timeline support
  drm: report consistent errors when checking syncobj capibility
  drm/nouveau/nouveau: forward error generated while resuming objects tree
  drm/nouveau/fb/ramgk104: fix spelling mistake "sucessfully" -> "successfully"
  drm/nouveau/i2c: Disable i2c bus access after ->fini()
  drm/nouveau: Remove duplicate ACPI_VIDEO_NOTIFY_PROBE definition
  ...

1 files changed, 91 insertions, 7 deletions

diff --git a/drivers/gpu/drm/amd/include/atomfirmware.h b/drivers/gpu/drm/amd/include/atomfirmware.h
index 8eb0bb241210..d3075adb3297 100644
--- a/drivers/gpu/drm/amd/include/atomfirmware.h
+++ b/drivers/gpu/drm/amd/include/atomfirmware.h
@@ -494,6 +494,9 @@ enum atombios_firmware_capability
   ATOM_FIRMWARE_CAP_FIRMWARE_POSTED = 0x00000001,
   ATOM_FIRMWARE_CAP_GPU_VIRTUALIZATION  = 0x00000002,
   ATOM_FIRMWARE_CAP_WMI_SUPPORT  = 0x00000040,
+  ATOM_FIRMWARE_CAP_HWEMU_ENABLE  = 0x00000080,
+  ATOM_FIRMWARE_CAP_HWEMU_UMC_CFG = 0x00000100,
+  ATOM_FIRMWARE_CAP_SRAM_ECC      = 0x00000200,
 };
 
 enum atom_cooling_solution_id{
@@ -528,6 +531,35 @@ struct atom_firmware_info_v3_2 {
   uint32_t reserved2[3];
 };
 
+struct atom_firmware_info_v3_3
+{
+  struct atom_common_table_header table_header;
+  uint32_t firmware_revision;
+  uint32_t bootup_sclk_in10khz;
+  uint32_t bootup_mclk_in10khz;
+  uint32_t firmware_capability;             // enum atombios_firmware_capability
+  uint32_t main_call_parser_entry;          /* direct address of main parser call in VBIOS binary. */
+  uint32_t bios_scratch_reg_startaddr;      // 1st bios scratch register dword address
+  uint16_t bootup_vddc_mv;
+  uint16_t bootup_vddci_mv;
+  uint16_t bootup_mvddc_mv;
+  uint16_t bootup_vddgfx_mv;
+  uint8_t  mem_module_id;
+  uint8_t  coolingsolution_id;              /*0: Air cooling; 1: Liquid cooling ... */
+  uint8_t  reserved1[2];
+  uint32_t mc_baseaddr_high;
+  uint32_t mc_baseaddr_low;
+  uint8_t  board_i2c_feature_id;            // enum of atom_board_i2c_feature_id_def
+  uint8_t  board_i2c_feature_gpio_id;       // i2c id find in gpio_lut data table gpio_id
+  uint8_t  board_i2c_feature_slave_addr;
+  uint8_t  reserved3;
+  uint16_t bootup_mvddq_mv;
+  uint16_t bootup_mvpp_mv;
+  uint32_t zfbstartaddrin16mb;
+  uint32_t pplib_pptable_id;                // if pplib_pptable_id!=0, pplib get powerplay table inside driver instead of from VBIOS
+  uint32_t reserved2[2];
+};
+
 /* 
   ***************************************************************************
     Data Table lcd_info  structure
@@ -686,6 +718,7 @@ enum atom_encoder_caps_def
   ATOM_ENCODER_CAP_RECORD_HBR2_EN               =0x02,         // DP1.2 HBR2 setting is qualified and HBR2 can be enabled 
   ATOM_ENCODER_CAP_RECORD_HDMI6Gbps_EN          =0x04,         // HDMI2.0 6Gbps enable or not. 
   ATOM_ENCODER_CAP_RECORD_HBR3_EN               =0x08,         // DP1.3 HBR3 is supported by board. 
+  ATOM_ENCODER_CAP_RECORD_USB_C_TYPE            =0x100,        // the DP connector is a USB-C type.
 };
 
 struct  atom_encoder_caps_record
@@ -1226,16 +1259,17 @@ struct  atom_gfx_info_v2_3 {
   uint32_t rm21_sram_vmin_value;
 };
 
-struct  atom_gfx_info_v2_4 {
+struct  atom_gfx_info_v2_4
+{
   struct  atom_common_table_header  table_header;
   uint8_t gfxip_min_ver;
   uint8_t gfxip_max_ver;
-  uint8_t gc_num_se;
-  uint8_t max_tile_pipes;
-  uint8_t gc_num_cu_per_sh;
-  uint8_t gc_num_sh_per_se;
-  uint8_t gc_num_rb_per_se;
-  uint8_t gc_num_tccs;
+  uint8_t max_shader_engines;
+  uint8_t reserved;
+  uint8_t max_cu_per_sh;
+  uint8_t max_sh_per_se;
+  uint8_t max_backends_per_se;
+  uint8_t max_texture_channel_caches;
   uint32_t regaddr_cp_dma_src_addr;
   uint32_t regaddr_cp_dma_src_addr_hi;
   uint32_t regaddr_cp_dma_dst_addr;
@@ -1780,6 +1814,56 @@ struct atom_umc_info_v3_1
   uint32_t mem_refclk_10khz;
 };
 
+// umc_info.umc_config
+enum atom_umc_config_def {
+  UMC_CONFIG__ENABLE_1KB_INTERLEAVE_MODE  =   0x00000001,
+  UMC_CONFIG__DEFAULT_MEM_ECC_ENABLE      =   0x00000002,
+  UMC_CONFIG__ENABLE_HBM_LANE_REPAIR      =   0x00000004,
+  UMC_CONFIG__ENABLE_BANK_HARVESTING      =   0x00000008,
+  UMC_CONFIG__ENABLE_PHY_REINIT           =   0x00000010,
+  UMC_CONFIG__DISABLE_UCODE_CHKSTATUS     =   0x00000020,
+};
+
+struct atom_umc_info_v3_2
+{
+  struct  atom_common_table_header  table_header;
+  uint32_t ucode_version;
+  uint32_t ucode_rom_startaddr;
+  uint32_t ucode_length;
+  uint16_t umc_reg_init_offset;
+  uint16_t customer_ucode_name_offset;
+  uint16_t mclk_ss_percentage;
+  uint16_t mclk_ss_rate_10hz;
+  uint8_t umcip_min_ver;
+  uint8_t umcip_max_ver;
+  uint8_t vram_type;              //enum of atom_dgpu_vram_type
+  uint8_t umc_config;
+  uint32_t mem_refclk_10khz;
+  uint32_t pstate_uclk_10khz[4];
+  uint16_t umcgoldenoffset;
+  uint16_t densitygoldenoffset;
+};
+
+struct atom_umc_info_v3_3
+{
+  struct  atom_common_table_header  table_header;
+  uint32_t ucode_reserved;
+  uint32_t ucode_rom_startaddr;
+  uint32_t ucode_length;
+  uint16_t umc_reg_init_offset;
+  uint16_t customer_ucode_name_offset;
+  uint16_t mclk_ss_percentage;
+  uint16_t mclk_ss_rate_10hz;
+  uint8_t umcip_min_ver;
+  uint8_t umcip_max_ver;
+  uint8_t vram_type;              //enum of atom_dgpu_vram_type
+  uint8_t umc_config;
+  uint32_t mem_refclk_10khz;
+  uint32_t pstate_uclk_10khz[4];
+  uint16_t umcgoldenoffset;
+  uint16_t densitygoldenoffset;
+  uint32_t reserved[4];
+};
 
 /* 
   ***************************************************************************