Merge tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This has two exciting community drivers for ARM Mali accelerators.
  Since ARM has never been open source friendly on the GPU side of the
  house, the community has had to create open source drivers for the
  Mali GPUs. Lima covers the older t4xx and panfrost the newer 6xx/7xx
  series. Well done to all involved and hopefully this will help ARM
  head in the right direction.

  There is also now the ability if you don't have any of the legacy
  drivers enabled (pre-KMS) to remove all the pre-KMS support code from
  the core drm, this saves 10% or so in codesize on my machine.

  i915 also enable Icelake/Elkhart Lake Gen11 GPUs by default, vboxvideo
  moves out of staging.

  There are also some rcar-du patches which crossover with media tree
  but all should be acked by Mauro.

  Summary:

  uapi changes:
   - Colorspace connector property
   - fourcc - new YUV formts
   - timeline sync objects initially merged
   - expose FB_DAMAGE_CLIPS to atomic userspace

  new drivers:
   - vboxvideo: moved out of staging
   - aspeed: ASPEED SoC BMC chip display support
   - lima: ARM Mali4xx GPU acceleration driver support
   - panfrost: ARM Mali6xx/7xx Midgard/Bitfrost acceleration driver support

  core:
   - component helper docs
   - unplugging fixes
   - devm device init
   - MIPI/DSI rate control
   - shmem backed gem objects
   - connector, display_info, edid_quirks cleanups
   - dma_buf fence chain support
   - 64-bit dma-fence seqno comparison fixes
   - move initial fb config code to core
   - gem fence array helpers for Lima
   - ability to remove legacy support code if no drivers requires it (removes 10% of drm.ko size)
   - lease fixes

  ttm:
   - unified DRM_FILE_PAGE_OFFSET handling
   - Account for kernel allocations in kernel zone only

  panel:
   - OSD070T1718-19TS panel support
   - panel-tpo-td028ttec1 backlight support
   - Ronbo RB070D30 MIPI/DSI
   - Feiyang FY07024DI26A30-D MIPI-DSI panel
   - Rocktech jh057n00900 MIPI-DSI panel

  i915:
   - Comet Lake (Gen9) PCI IDs
   - Updated Icelake PCI IDs
   - Elkhartlake (Gen11) support
   - DP MST property addtions
   - plane and watermark fixes
   - Icelake port sync and VEBOX disable fixes
   - struct_mutex usage reduction
   - Icelake gamma fix
   - GuC reset fixes
   - make mmap more asynchronous
   - sound display power well race fixes
   - DDI/MIPI-DSI clocks for Icelake
   - Icelake RPS frequency changing support
   - Icelake workarounds

  amdgpu:
   - Use HMM for userptr
   - vega20 experimental smu11 support
   - RAS support for vega20
   - BACO support for vega12 + fixes for vega20
   - reworked IH interrupt handling
   - amdkfd RAS support
   - Freesync improvements
   - initial timeline sync object support
   - DC Z ordering fixes
   - NV12 planes support
   - colorspace properties for planes=
   - eDP opts if eDP already initialized

  nouveau:
   - misc fixes

  etnaviv:
   - misc fixes

  msm:
   - GPU zap shader support expansion
   - robustness ABI addition

  exynos:
   - Logging cleanups

  tegra:
   - Shared reset fix
   - CPU cache maintenance fix

  cirrus:
   - driver rewritten using simple helpers

  meson:
   - G12A support

  vmwgfx:
   - Resource dirtying management improvements
   - Userspace logging improvements

  virtio:
   - PRIME fixes

  rockchip:
   - rk3066 hdmi support

  sun4i:
   - DSI burst mode support

  vc4:
   - load tracker to detect underflow

  v3d:
   - v3d v4.2 support

  malidp:
   - initial Mali D71 support in komeda driver

  tfp410:
   - omap related improvement

  omapdrm:
   - drm bridge/panel support
   - drop some omap specific panels

  rcar-du:
   - Display writeback support"

* tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm: (1507 commits)
  drm/msm/a6xx: No zap shader is not an error
  drm/cma-helper: Fix drm_gem_cma_free_object()
  drm: Fix timestamp docs for variable refresh properties.
  drm/komeda: Mark the local functions as static
  drm/komeda: Fixed warning: Function parameter or member not described
  drm/komeda: Expose bus_width to Komeda-CORE
  drm/komeda: Add sysfs attribute: core_id and config_id
  drm: add non-desktop quirk for Valve HMDs
  drm/panfrost: Show stored feature registers
  drm/panfrost: Don't scream about deferred probe
  drm/panfrost: Disable PM on probe failure
  drm/panfrost: Set DMA masks earlier
  drm/panfrost: Add sanity checks to submit IOCTL
  drm/etnaviv: initialize idle mask before querying the HW db
  drm: introduce a capability flag for syncobj timeline support
  drm: report consistent errors when checking syncobj capibility
  drm/nouveau/nouveau: forward error generated while resuming objects tree
  drm/nouveau/fb/ramgk104: fix spelling mistake "sucessfully" -> "successfully"
  drm/nouveau/i2c: Disable i2c bus access after ->fini()
  drm/nouveau: Remove duplicate ACPI_VIDEO_NOTIFY_PROBE definition
  ...

1 files changed, 13 insertions, 23 deletions

diff --git a/drivers/gpu/drm/amd/display/dc/dm_services.h b/drivers/gpu/drm/amd/display/dc/dm_services.h
index 1961cc6d9143..b426ba02b793 100644
--- a/drivers/gpu/drm/amd/display/dc/dm_services.h
+++ b/drivers/gpu/drm/amd/display/dc/dm_services.h
@@ -52,30 +52,17 @@ irq_handler_idx dm_register_interrupt(
  * GPU registers access
  *
  */
-
+uint32_t dm_read_reg_func(
+	const struct dc_context *ctx,
+	uint32_t address,
+	const char *func_name);
 /* enable for debugging new code, this adds 50k to the driver size. */
 /* #define DM_CHECK_ADDR_0 */
 
 #define dm_read_reg(ctx, address)	\
 		dm_read_reg_func(ctx, address, __func__)
 
-static inline uint32_t dm_read_reg_func(
-	const struct dc_context *ctx,
-	uint32_t address,
-	const char *func_name)
-{
-	uint32_t value;
-#ifdef DM_CHECK_ADDR_0
-	if (address == 0) {
-		DC_ERR("invalid register read; address = 0\n");
-		return 0;
-	}
-#endif
-	value = cgs_read_register(ctx->cgs_device, address);
-	trace_amdgpu_dc_rreg(&ctx->perf_trace->read_count, address, value);
 
-	return value;
-}
 
 #define dm_write_reg(ctx, address, value)	\
 	dm_write_reg_func(ctx, address, value, __func__)
@@ -144,10 +131,14 @@ static inline uint32_t set_reg_field_value_ex(
 		reg_name ## __ ## reg_field ## _MASK,\
 		reg_name ## __ ## reg_field ## __SHIFT)
 
-uint32_t generic_reg_update_ex(const struct dc_context *ctx,
+uint32_t generic_reg_set_ex(const struct dc_context *ctx,
 		uint32_t addr, uint32_t reg_val, int n,
 		uint8_t shift1, uint32_t mask1, uint32_t field_value1, ...);
 
+uint32_t generic_reg_update_ex(const struct dc_context *ctx,
+		uint32_t addr, int n,
+		uint8_t shift1, uint32_t mask1, uint32_t field_value1, ...);
+
 #define FD(reg_field)	reg_field ## __SHIFT, \
 						reg_field ## _MASK
 
@@ -155,7 +146,7 @@ uint32_t generic_reg_update_ex(const struct dc_context *ctx,
  * return number of poll before condition is met
  * return 0 if condition is not meet after specified time out tries
  */
-unsigned int generic_reg_wait(const struct dc_context *ctx,
+void generic_reg_wait(const struct dc_context *ctx,
 	uint32_t addr, uint32_t mask, uint32_t shift, uint32_t condition_value,
 	unsigned int delay_between_poll_us, unsigned int time_out_num_tries,
 	const char *func_name, int line);
@@ -172,11 +163,10 @@ unsigned int generic_reg_wait(const struct dc_context *ctx,
 
 #define generic_reg_update_soc15(ctx, inst_offset, reg_name, n, ...)\
 		generic_reg_update_ex(ctx, DCE_BASE.instance[0].segment[mm##reg_name##_BASE_IDX] +  mm##reg_name + inst_offset, \
-		dm_read_reg_func(ctx, mm##reg_name + DCE_BASE.instance[0].segment[mm##reg_name##_BASE_IDX] + inst_offset, __func__), \
 		n, __VA_ARGS__)
 
 #define generic_reg_set_soc15(ctx, inst_offset, reg_name, n, ...)\
-		generic_reg_update_ex(ctx, DCE_BASE.instance[0].segment[mm##reg_name##_BASE_IDX] + mm##reg_name + inst_offset, 0, \
+		generic_reg_set_ex(ctx, DCE_BASE.instance[0].segment[mm##reg_name##_BASE_IDX] + mm##reg_name + inst_offset, 0, \
 		n, __VA_ARGS__)
 
 #define get_reg_field_value_soc15(reg_value, block, reg_num, reg_name, reg_field)\
@@ -223,8 +213,8 @@ bool dm_pp_notify_wm_clock_changes(
 	const struct dc_context *ctx,
 	struct dm_pp_wm_sets_with_clock_ranges *wm_with_clock_ranges);
 
-void dm_pp_get_funcs_rv(struct dc_context *ctx,
-		struct pp_smu_funcs_rv *funcs);
+void dm_pp_get_funcs(struct dc_context *ctx,
+		struct pp_smu_funcs *funcs);
 
 /* DAL calls this function to notify PP about completion of Mode Set.
  * For PP it means that current DCE clocks are those which were returned