x86/syscall/32: Move 32-bit syscall dispatch code

Move the 32-bit syscall dispatch code to syscall_32.c.

No functional changes.

Signed-off-by: Brian Gerst <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Sohil Mehta <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

1 files changed, 0 insertions, 321 deletions

diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c
index ce4d88eda693..183efabefe57 100644
--- a/arch/x86/entry/common.c
+++ b/arch/x86/entry/common.c
@@ -125,327 +125,6 @@ __visible noinstr bool do_syscall_64(struct pt_regs *regs, int nr)
 }
 #endif
 
-#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
-static __always_inline int syscall_32_enter(struct pt_regs *regs)
-{
-	if (IS_ENABLED(CONFIG_IA32_EMULATION))
-		current_thread_info()->status |= TS_COMPAT;
-
-	return (int)regs->orig_ax;
-}
-
-#ifdef CONFIG_IA32_EMULATION
-bool __ia32_enabled __ro_after_init = !IS_ENABLED(CONFIG_IA32_EMULATION_DEFAULT_DISABLED);
-
-static int __init ia32_emulation_override_cmdline(char *arg)
-{
-	return kstrtobool(arg, &__ia32_enabled);
-}
-early_param("ia32_emulation", ia32_emulation_override_cmdline);
-#endif
-
-/*
- * Invoke a 32-bit syscall.  Called with IRQs on in CT_STATE_KERNEL.
- */
-static __always_inline void do_syscall_32_irqs_on(struct pt_regs *regs, int nr)
-{
-	/*
-	 * Convert negative numbers to very high and thus out of range
-	 * numbers for comparisons.
-	 */
-	unsigned int unr = nr;
-
-	if (likely(unr < IA32_NR_syscalls)) {
-		unr = array_index_nospec(unr, IA32_NR_syscalls);
-		regs->ax = ia32_sys_call(regs, unr);
-	} else if (nr != -1) {
-		regs->ax = __ia32_sys_ni_syscall(regs);
-	}
-}
-
-#ifdef CONFIG_IA32_EMULATION
-static __always_inline bool int80_is_external(void)
-{
-	const unsigned int offs = (0x80 / 32) * 0x10;
-	const u32 bit = BIT(0x80 % 32);
-
-	/* The local APIC on XENPV guests is fake */
-	if (cpu_feature_enabled(X86_FEATURE_XENPV))
-		return false;
-
-	/*
-	 * If vector 0x80 is set in the APIC ISR then this is an external
-	 * interrupt. Either from broken hardware or injected by a VMM.
-	 *
-	 * Note: In guest mode this is only valid for secure guests where
-	 * the secure module fully controls the vAPIC exposed to the guest.
-	 */
-	return apic_read(APIC_ISR + offs) & bit;
-}
-
-/**
- * do_int80_emulation - 32-bit legacy syscall C entry from asm
- * @regs: syscall arguments in struct pt_args on the stack.
- *
- * This entry point can be used by 32-bit and 64-bit programs to perform
- * 32-bit system calls.  Instances of INT $0x80 can be found inline in
- * various programs and libraries.  It is also used by the vDSO's
- * __kernel_vsyscall fallback for hardware that doesn't support a faster
- * entry method.  Restarted 32-bit system calls also fall back to INT
- * $0x80 regardless of what instruction was originally used to do the
- * system call.
- *
- * This is considered a slow path.  It is not used by most libc
- * implementations on modern hardware except during process startup.
- *
- * The arguments for the INT $0x80 based syscall are on stack in the
- * pt_regs structure:
- *   eax:				system call number
- *   ebx, ecx, edx, esi, edi, ebp:	arg1 - arg 6
- */
-__visible noinstr void do_int80_emulation(struct pt_regs *regs)
-{
-	int nr;
-
-	/* Kernel does not use INT $0x80! */
-	if (unlikely(!user_mode(regs))) {
-		irqentry_enter(regs);
-		instrumentation_begin();
-		panic("Unexpected external interrupt 0x80\n");
-	}
-
-	/*
-	 * Establish kernel context for instrumentation, including for
-	 * int80_is_external() below which calls into the APIC driver.
-	 * Identical for soft and external interrupts.
-	 */
-	enter_from_user_mode(regs);
-
-	instrumentation_begin();
-	add_random_kstack_offset();
-
-	/* Validate that this is a soft interrupt to the extent possible */
-	if (unlikely(int80_is_external()))
-		panic("Unexpected external interrupt 0x80\n");
-
-	/*
-	 * The low level idtentry code pushed -1 into regs::orig_ax
-	 * and regs::ax contains the syscall number.
-	 *
-	 * User tracing code (ptrace or signal handlers) might assume
-	 * that the regs::orig_ax contains a 32-bit number on invoking
-	 * a 32-bit syscall.
-	 *
-	 * Establish the syscall convention by saving the 32bit truncated
-	 * syscall number in regs::orig_ax and by invalidating regs::ax.
-	 */
-	regs->orig_ax = regs->ax & GENMASK(31, 0);
-	regs->ax = -ENOSYS;
-
-	nr = syscall_32_enter(regs);
-
-	local_irq_enable();
-	nr = syscall_enter_from_user_mode_work(regs, nr);
-	do_syscall_32_irqs_on(regs, nr);
-
-	instrumentation_end();
-	syscall_exit_to_user_mode(regs);
-}
-
-#ifdef CONFIG_X86_FRED
-/*
- * A FRED-specific INT80 handler is warranted for the follwing reasons:
- *
- * 1) As INT instructions and hardware interrupts are separate event
- *    types, FRED does not preclude the use of vector 0x80 for external
- *    interrupts. As a result, the FRED setup code does not reserve
- *    vector 0x80 and calling int80_is_external() is not merely
- *    suboptimal but actively incorrect: it could cause a system call
- *    to be incorrectly ignored.
- *
- * 2) It is called only for handling vector 0x80 of event type
- *    EVENT_TYPE_SWINT and will never be called to handle any external
- *    interrupt (event type EVENT_TYPE_EXTINT).
- *
- * 3) FRED has separate entry flows depending on if the event came from
- *    user space or kernel space, and because the kernel does not use
- *    INT insns, the FRED kernel entry handler fred_entry_from_kernel()
- *    falls through to fred_bad_type() if the event type is
- *    EVENT_TYPE_SWINT, i.e., INT insns. So if the kernel is handling
- *    an INT insn, it can only be from a user level.
- *
- * 4) int80_emulation() does a CLEAR_BRANCH_HISTORY. While FRED will
- *    likely take a different approach if it is ever needed: it
- *    probably belongs in either fred_intx()/ fred_other() or
- *    asm_fred_entrypoint_user(), depending on if this ought to be done
- *    for all entries from userspace or only system
- *    calls.
- *
- * 5) INT $0x80 is the fast path for 32-bit system calls under FRED.
- */
-DEFINE_FREDENTRY_RAW(int80_emulation)
-{
-	int nr;
-
-	enter_from_user_mode(regs);
-
-	instrumentation_begin();
-	add_random_kstack_offset();
-
-	/*
-	 * FRED pushed 0 into regs::orig_ax and regs::ax contains the
-	 * syscall number.
-	 *
-	 * User tracing code (ptrace or signal handlers) might assume
-	 * that the regs::orig_ax contains a 32-bit number on invoking
-	 * a 32-bit syscall.
-	 *
-	 * Establish the syscall convention by saving the 32bit truncated
-	 * syscall number in regs::orig_ax and by invalidating regs::ax.
-	 */
-	regs->orig_ax = regs->ax & GENMASK(31, 0);
-	regs->ax = -ENOSYS;
-
-	nr = syscall_32_enter(regs);
-
-	local_irq_enable();
-	nr = syscall_enter_from_user_mode_work(regs, nr);
-	do_syscall_32_irqs_on(regs, nr);
-
-	instrumentation_end();
-	syscall_exit_to_user_mode(regs);
-}
-#endif
-#else /* CONFIG_IA32_EMULATION */
-
-/* Handles int $0x80 on a 32bit kernel */
-__visible noinstr void do_int80_syscall_32(struct pt_regs *regs)
-{
-	int nr = syscall_32_enter(regs);
-
-	add_random_kstack_offset();
-	/*
-	 * Subtlety here: if ptrace pokes something larger than 2^31-1 into
-	 * orig_ax, the int return value truncates it. This matches
-	 * the semantics of syscall_get_nr().
-	 */
-	nr = syscall_enter_from_user_mode(regs, nr);
-	instrumentation_begin();
-
-	do_syscall_32_irqs_on(regs, nr);
-
-	instrumentation_end();
-	syscall_exit_to_user_mode(regs);
-}
-#endif /* !CONFIG_IA32_EMULATION */
-
-static noinstr bool __do_fast_syscall_32(struct pt_regs *regs)
-{
-	int nr = syscall_32_enter(regs);
-	int res;
-
-	add_random_kstack_offset();
-	/*
-	 * This cannot use syscall_enter_from_user_mode() as it has to
-	 * fetch EBP before invoking any of the syscall entry work
-	 * functions.
-	 */
-	syscall_enter_from_user_mode_prepare(regs);
-
-	instrumentation_begin();
-	/* Fetch EBP from where the vDSO stashed it. */
-	if (IS_ENABLED(CONFIG_X86_64)) {
-		/*
-		 * Micro-optimization: the pointer we're following is
-		 * explicitly 32 bits, so it can't be out of range.
-		 */
-		res = __get_user(*(u32 *)&regs->bp,
-			 (u32 __user __force *)(unsigned long)(u32)regs->sp);
-	} else {
-		res = get_user(*(u32 *)&regs->bp,
-		       (u32 __user __force *)(unsigned long)(u32)regs->sp);
-	}
-
-	if (res) {
-		/* User code screwed up. */
-		regs->ax = -EFAULT;
-
-		local_irq_disable();
-		instrumentation_end();
-		irqentry_exit_to_user_mode(regs);
-		return false;
-	}
-
-	nr = syscall_enter_from_user_mode_work(regs, nr);
-
-	/* Now this is just like a normal syscall. */
-	do_syscall_32_irqs_on(regs, nr);
-
-	instrumentation_end();
-	syscall_exit_to_user_mode(regs);
-	return true;
-}
-
-/* Returns true to return using SYSEXIT/SYSRETL, or false to use IRET */
-__visible noinstr bool do_fast_syscall_32(struct pt_regs *regs)
-{
-	/*
-	 * Called using the internal vDSO SYSENTER/SYSCALL32 calling
-	 * convention.  Adjust regs so it looks like we entered using int80.
-	 */
-	unsigned long landing_pad = (unsigned long)current->mm->context.vdso +
-					vdso_image_32.sym_int80_landing_pad;
-
-	/*
-	 * SYSENTER loses EIP, and even SYSCALL32 needs us to skip forward
-	 * so that 'regs->ip -= 2' lands back on an int $0x80 instruction.
-	 * Fix it up.
-	 */
-	regs->ip = landing_pad;
-
-	/* Invoke the syscall. If it failed, keep it simple: use IRET. */
-	if (!__do_fast_syscall_32(regs))
-		return false;
-
-	/*
-	 * Check that the register state is valid for using SYSRETL/SYSEXIT
-	 * to exit to userspace.  Otherwise use the slower but fully capable
-	 * IRET exit path.
-	 */
-
-	/* XEN PV guests always use the IRET path */
-	if (cpu_feature_enabled(X86_FEATURE_XENPV))
-		return false;
-
-	/* EIP must point to the VDSO landing pad */
-	if (unlikely(regs->ip != landing_pad))
-		return false;
-
-	/* CS and SS must match the values set in MSR_STAR */
-	if (unlikely(regs->cs != __USER32_CS || regs->ss != __USER_DS))
-		return false;
-
-	/* If the TF, RF, or VM flags are set, use IRET */
-	if (unlikely(regs->flags & (X86_EFLAGS_RF | X86_EFLAGS_TF | X86_EFLAGS_VM)))
-		return false;
-
-	/* Use SYSRETL/SYSEXIT to exit to userspace */
-	return true;
-}
-
-/* Returns true to return using SYSEXIT/SYSRETL, or false to use IRET */
-__visible noinstr bool do_SYSENTER_32(struct pt_regs *regs)
-{
-	/* SYSENTER loses RSP, but the vDSO saved it in RBP. */
-	regs->sp = regs->bp;
-
-	/* SYSENTER clobbers EFLAGS.IF.  Assume it was set in usermode. */
-	regs->flags |= X86_EFLAGS_IF;
-
-	return do_fast_syscall_32(regs);
-}
-#endif
-
 SYSCALL_DEFINE0(ni_syscall)
 {
 	return -ENOSYS;