* src/gpgme.h.in: Clarify that the trustlist function should not be
used.
* src/engine.c (_gpgme_engine_op_trustlist): Always return an error.
* src/engine-backend.h (struct engine_ops): Remove trustlist member.
* src/engine-gpg.c (gpg_trustlist): Remove.
(struct engine_ops): Remove that member. Also in all other engines.
* tests/gpg/t-trustlist.c: Remove.
* lang/python/tests/t-trustlist.py: Remove.
--
This never worked in reality because the required feature has been
removed from GnuPG version 1.3.2 soon after introduction of this
feature in gpgme - 17 years ago. It was anyway marked as
experimental. We keep the API and ABI, though.
GnuPG-bug-id: 4834
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpg/cipher-3.asc: add an encrypted file containing signatures
(one from a known key, and one from an unknown key)
* tests/gpg/cipher-no-sig.asc: add an encrypted file containing no
signatures at all
--
We currently aren't using these files yet, but they should be useful
for exercising the library in unusual circumstances (where the bugs
are).
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* lang/python/tests/Makefile.am,
lang/qt/tests/Makefile.am,
tests/Makefile.am,
tests/gpg/Makefile.am,
tests/gpgsm/Makefile.am,
tests/opassuan/Makefile.am (GNUPGHOME): Make variable explict.
--
If the build directory has too long path, gpgme could fail.
This is similar to
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=847206
In order to fix that, this patch extracts the GNUPGHOME variable
to be presented directly in the Makefile and thus overridable by
command line option.
A build system can then create a symlink to the GNUPGHOME directory
in /tmp and use that symlink as the GNUPGHOME directory
thus making the path very short.
GnuPG-Bug-Id: T4091
Patch provided by vlmarek
* tests/gpg/Makefile.am: Don't allow target with '/'.
* tests/gpgsm/Makefile.am: Ditto.
--
BSD Make doesn't allow a target with '/'. We still have such a target
in lang/python/Makefile.am, but it's for maintainer only, so,
assumption to GNU Make is OK there.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/gpg/Makefile.am, tests/gpgsm/Makefile.am: Remove ./.
--
GNU Make is powerful enough for handling and interpreting of
pathname as target, but BSD Make is not.
GnuPG-bug-id: 3056
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* lang/python/tests/Makefile.am: Distinguish target and path.
* tests/gpg/Makefile.am: Ditto.
* tests/gpgsm/Makefile.am: Ditto.
--
GNU Make is powerful enough to match path to target (and vice versa),
but BSD make is not.
GnuPG-bug-id: 3056
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* lang/python/tests/Makefile.am: Kill all previously running daemons
before creating the private key store.
* lang/qt/tests/Makefile.am: Likewise.
* tests/gpg/Makefile.am: Likewise.
* tests/gpgsm/Makefile.am: Likewise.
--
Now that the daemons sockets are no longer created in the GNUPGHOME,
we cannot rely on cleaning the build directory to make sure they are
shut down. Therefore, we explicitly kill any running daemons when
creating the test environment.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/tests/Makefile.am: Create test environment as part of
'make all'.
* tests/gpg/Makefile.am: Make sure the private keystore is created
first.
* tests/gpgsm/Makefile.am: Create test environment as part of
'make all'. Make sure the private keystore is created
first.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpg/Makefile.am: Use BUILT_SOURCES instead of check-local
and initial.test.
* lang/qt/tests/Makefile.am: Ditto.
--
This fixes "make dist" failure when source tree is clean:
git clean -dxf
autoreconf -ivf
./configure
make dist
BUILT_SOURCES should be used when file as generated without explicit
dependency. The check-local is all-am dependency, this means that it
will be resolved also in "make dist".
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
* tests/gpg/Makefile.am (tests_unix): Add 't-thread-keylist' and
't-thread-keylist-verify'.
(c_tests): Drop them here.
--
The tests use pthreads and we suspect problems with MinGW's wrappers.
Signed-off-by: Justus Winter <justus@g10code.com>
* configure.ac: Require libgpg-error 1.17. No longer
check for pthread.
* doc/gpgme.texi: Document removed neccessity for thread
safe gpgme flavours.
* src/sema.h (DEFINE_GLOBAL_LOCK),
(DEFINE_STATIC_LOCK, INIT_LOCK, DECLARE_LOCK)
(DESTROY_LOCK, LOCK, UNLOCK): Change to gpgrt equivalents.
* src/posix-sema.c, src/w32-sema.c: Removed.
* src/Makefile.am: Remove libpthread and
Update accordingly.
* src/ath.c, src/ath.h (ath_mutex_init)
(ath_mutex_destroy, ath_mutex_lock, ath_mutex_unlock): Removed.
* src/ath.h (ATH_MUTEX_INITIALIZER): Removed.
* src/version.c (do_subsystem_inits): sema_subsystem_init is
no longer required.
* tests/gpg/Makefile.am: Add new threading tests.
(t_thread1_LDADD, t_cancel_LDADD):
Use just gpgme.
* tests/gpg/t-thread-keylist-verify.c,
tests/gpg/t-thread-keylist.c: New.
* src/gpgme-config.in: Use -lgpgme for thread-model pthread.
--
Using gpgrt locks instead of pthread locks removes
the neccessity to link pthread directly to gpgme and
have a different, thread safe flavor of gpgme. Now
gpgme is thread-safe if the conditions mentioned
in the doc are met.
As the cpp bindings linked against libgpgme
and not libgpgme-pthread this fixes threading problems
with them.
libgpgme-pthread is removed but gpgme-config still supports
--thread=pthread for compatibility with find scripts.
* lang/python/tests/Makefile.am (./pubring-stamp): Use --batch with
GPG to avoid Pinentries during import when using GnuPG >= 2.1.
Replace touch by echo.
* tests/gpg/Makefile.am (./pubring-stamp): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (gpgme_encrypt_flags_t): New flag
GPGME_ENCRYPT_SYMMETRIC.
* src/engine-gpg.c (gpg_encrypt): Also add --symmetric if the flag
is given.
* NEWS: Mention new flag.
* tests/run-encrypt.c (show_usage): Extend for --symmetric.
(main): Handle --symmetric.
(main): Set passphrase_cb in loopback mode.
(main): Fix encrypt call if no recipients are given.
* tests/gpg/t-encrypt-mixed.c: New.
* tests/gpg/Makefile.am (c_tests): Add new test.
* doc/gpgme.texi: Document new flag.
* tests/gpgsm/final.test: New.
* tests/gpgsm/initial.test: New.
* tests/gpg/start-stop-agent: Move to ../.
* tests/gpgsm/Makefile.am (TESTS_ENVIRONMENT): Export top_srcdir.
(TESTS): Add intial.test and final.test.
(AM_LDFLAGS): Add -no-install.
(clean-local): Use start-stop-agent
(initial.test): Add dependency.
* tests/gpg/Makefile.am (top_srcdir): Export top_srcdir.
(AM_LDFLAGS): Add -no-install.
(check-local): Depend on pubring-stamp instead of pubring.gpg.
(initial.test): Depend on check-local.
(./pubring-gpg): Replace by rule for ./pubring-stamp.
--
There are also a couple of other changes which should make the tests a
bit more robust and the gpg and gpgsm tests more similar.
The -no-install avoids creating wrappers for test programs, which make
debugging easier.
The dependency on check-local guarantees that its rules are run before
the first test. This is important because conf files are setup by
this rule. Earlier automake versions seem to have run check-local
always before the tests but today the order of execution is not
defined.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (NEED_GPG_VERSION, NEED_GPGSM_VERSION)
(NEED_G13_VERSION, NEED_GPGCONF_VERSION): Remove vars and all related
checks. Do not check for any engine version.
(HAVE_ASSUAN): Remove AM conditional.
* src/Makefile.am: Remove separate component vars and always build all
engines but uiserver.
* src/dirinfo.c (WANT_GPGCONF_NAME): New.
(struct dirinfo): Add field gpgconf_name.
(_gpgme_get_default_gpgconf_name): Use WANT_GPGCONF_NAME.
(get_gpgconf_item): Set gpgconf name and adjust for _gpgme_get_*_path
now returning a malloced string.
* src/engine.c (engine_ops): Always init all engines except for
uiserver.
* src/posix-util.c (_gpgme_get_gpgsm_path, _gpgme_get_g13_path):
Remove unused functions.
(walk_path): New.
(_gpgme_get_gpg_path, _gpgme_get_gpgconf_path ): Re-implement using
walk_path.
* src/w32-util.c (_gpgme_get_gpgsm_path, _gpgme_get_g13_path): Remove
unused functions.
(_gpgme_get_gpg_path, _gpgme_get_gpgconf_path): Return a malloced
string.
* src/engine-g13.c (g13_get_req_version): Use a hardwired string with
the required version. This info belongs into this file.
* src/engine-gpg.c (gpg_get_req_version): Ditto.
* src/engine-gpgconf.c (gpgconf_get_req_version): Ditto.
* src/engine-gpgsm.c (gpgsm_get_req_version): Ditto.
* tests/t-engine-info.c: Replace now useless test by an info output.
* tests/gpg/Makefile.am (GPG, GPG_AGENT): Hardwire gpg and gpg-agent.
* tests/gpgsm/Makefile.am (GPGSM): Hardwire gpgsm.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpg/start-stop-agent: New.
* tests/gpg/initial.test: New.
* tests/gpg/final.test: New.
* tests/gpg/Makefile.am (c_tests): New.
(TESTS): Move all to c_tests. Add initial.test, final.test, and
c_tests.
(TESTS_ENVIRONMENT): Add C_ALL=C
(private_keys): New.
(EXTRA_DIST): Add new files.
(./private-keys-v1.d/gpg-sample.stamp): Copy private keys.
(all-local): Depend on gpg-sample.stamp.
* tests/gpg/13CBE3758AFE42B5E5E2AE4CED27AFA455E3F87F: New.
* tests/gpg/13CD0F3BDF24BE53FE192D62F18737256FF6E4FD: New.
* tests/gpg/76F7E2B35832976B50A27A282D9B87E44577EB66: New.
* tests/gpg/7A030357C0F253A5BBCD282FFC4E521B37558F5C: New.
* tests/gpg/A0747D5F9425E6664F4FFBEED20FBCA79FDED2BD: New.
--
GnuPG 2.1 requires that the agent knows the private keys. Thus we
need to install them. The code should still work with GnuPG < 2.1.
To make the whole testing using a agent more robust, the way to start
the agent has also be changed.
* assuan-pipe-connect.c (pipe_connect_gpgme): Do not close process
handle here. Use this function also on Unix systems.
gpgme/
2007-09-27 Marcus Brinkmann <marcus@g10code.de>
* w32-glib-io.c (_gpgme_io_spawn),
w32-qt-io.cpp (_gpgme_io_spawn), w32-io.c (_gpgme_io_spawn): Close
the process handle, return 0.
tests/
2007-09-27 Marcus Brinkmann <marcus@g10code.de>
* t-engine-info.c (check_engine_info): Fix debug output.
* gpg/Makefile.am (tests_unix): New variable.
(TESTS): Use it.
* gpg/t-support.h (passphrase_cb) [HAVE_W32_SYSTEM]: Use WriteFile instead of write.
* gpg/t-wait.c [HAVE_W32_SYSTEM]: Define sleep as _sleep.
2005-10-01 Marcus Brinkmann <marcus@g10code.de>
* gpgme.texi (Signature Notation Data): New section.
(Verify): Added more about the notation data structure.
gpgme/
2005-10-01 Marcus Brinkmann <marcus@g10code.de>
* gpgme.def: Add gpgme_data_set_file_name,
gpgme_data_get_file_name, gpgme_sig_notation_clear,
gpgme_sig_notation_add and gpgme_sig_notation_get.
* libgpgme.vers: Add gpgme_sig_notation_clear,
gpgme_sig_notation_add and gpgme_sig_notation_get.
* Makefile.am (libgpgme_real_la_SOURCES): Add sig-notation.c.
* context.h (struct gpgme_context): New field sig_notations.
* gpgme.h (struct _gpgme_sig_notation): New member value_len and
critical.
(GPGME_SIG_NOTATION_CRITICAL): New symbol.
(gpgme_sig_notation_flags_t): New type.
(gpgme_sig_notation_add, gpgme_sig_notation_clear,
gpgme_sig_notation_get): New prototypes.
* ops.h (_gpgme_sig_notation_create, _gpgme_sig_notation_free):
New prototypes.
* sig-notation.c (_gpgme_sig_notation_free): New file.
* verify.c (parse_notation): Use support functions.
(release_op_data): Likewise.
* rungpg.c (append_args_from_sig_notations): New function.
(gpg_encrypt_sign, gpg_sign): Call it.
tests/
2005-10-01 Marcus Brinkmann <marcus@g10code.de>
* gpg/Makefile.am (TESTS): Add t-sig-notation.
* gpg/t-sig-notation.c (check_result): New file.
* gpg/t-verify.c (check_result): Also check the length of the
notation data.
* gpg/gpg.conf: New file.
