* Woumd up the "what's new" section.
* Added an example for sending a key to the keyservers via hkp4py.
* Updated the export key code to use a more complete check for the
$GNUPGHOME location.
* Expanded on the installation and reinstallation troubleshooting
section.
Tested-by: Ben McGinnes <ben@adversary.org>
Signed-off-by: Ben McGinnes <ben@adversary.org>
* Added a What's New section to summarise changes since the last
release. There have been quite a few and some attention does need
to be drawn to some of them.
* Confirming certain issues with some platform builds, especially
BSD/OSX vs. Linux issues which will need to update the installation
troubleshooting guides.
* Added more comprehensive examples using hkp4py and added a couple
more example scripts for protonmail.
Tested-by: Ben McGinnes <ben@adversary.org>
Signed-off-by: Ben McGinnes <ben@adversary.org>
* Mostly tightening up the details on the hkp4py example script.
* Also fixed a typo in the LGPL boiler plate text included in all the
other example scripts for the HOWTO.
* added a new example script to search the keyservers and import the
results, this time using Marcel Fest's hkp4py module.
* Updated the key importing section to match this addition.
* Tested with the current version of hkp4py from github.
Tested-by: Ben McGinnes <ben@adversary.org>
Signed-off-by: Ben McGinnes <ben@adversary.org>
* Confirmed that updates to the tests have significant'y improved that
output.
* Updated some of the additional notes for the section on hkp4py.
** This is in anticipation adding at least import examples using that
module as well. It may also include adding examples of exporting a
key and uploading it to the keyservers.
Tested-by: Ben McGinnes <ben@adversary.org>
Signed-off-by: Ben McGinnes <ben@adversary.org>
* Added some material on using the new-ish hkp4py module with GPGME.
* Example code will be added later once a couple of little issues are
addressed.
Signed-off-by: Ben McGinnes <ben@adversary.org>
* Sanitized the shell command examples of extraneous whitespace.
* Removed keycount.c as sanitising it is pointless and it will be
generated by Cython when the example is followed.
* Regenerated the .texi version.
* Added new advanced section with an example of using the Python
bindings with CPython code compiled back to C code using Cython.
* Though it may seem a bit counter-intuitive to use the bindings just
to go back to C via a different route, this is not actually stupid.
* Added examples/howto/advanced/cython/ directory.
* Added keycount.pyx, setup.py and the keycount.c file which the first
two generated with Cython. Not including the .so and .o files from
the build.
* Exported the .texi version of the howto for the main docs.
* lang/python/docs/gpgme-python-howto.org: more tweaks and edits,
along with another build of output formats.
* doc/gpgme-python-howto.texi: updated texinfo version for parent docs.
* lang/python/docs/GPGMEpythonHOWTOen.org: Added corresponding GPGME
version number to table at the start and cut the shortcut from the
groups.py example.
* doc/gpgme-python-howto.texi: New export of Texinfo file for docs
build.
* gpgme.spec.in: Added gpgme-python-howto.info build on the grounds
that it now deals with certain possible installation issues and end
users encountering them would want the docs to hand.
* doc/gpgme.texi: updated the copyright year to this year.
* Added doc/gpgme-python-howto.texi: generated from
GPGMEpythonHOWTOen.org and then slightly modified so the generated
Info file doesn't use camelCase.
* doc/Makefile.am: Updated makefile to include the Python HOWTO with
gpgme_TEXINFOS and to export the generated files to the webserver
along with the main GPGME one.
This adds a new language binding "gpgme.js" to GPGME. It
serves as a bridge between the native-messaging service "gpgme-json"
and JavaScript Applications.
The first user of this binding will be Mailvelope which will
see GnuPG integration in the near future.
GnuPG-Bug-Id: T4107
* doc/examples/gpgme-chrome.json, doc/examples/gpgme-mozilla.json: New.
* doc/Makefile.am (EXTRA_DIST): Include them.
--
The id contained in the examples is the ID of Mailvelope.
* src/gpgme.h.in (gpgme_data_new_from_estream): New.
* src/data-estream.c: New.
* src/data.h (gpgme_data): New union member e_stream.
--
The estream functions (gpgrt_fopen et al.) are any waypart of the
required libgpg-error library and thus it makes sense to provide this
convenience interface.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpgme.texi (GPGME_KEYLIST_MODE_EXTERN),
(GPGME_KEYLIST_MODE_LOCATE, GPGME_KEYLIST_MODE_LOCAL): Mention
command line flags for CMS and OpenPGP Protocol.
--
This might help new users coming to gnupg to understand what
the flags do.
* src/engine-gpg.c (engine_gpg): Add diagnostics member.
(gpg_release): Release diagnostics data.
(gpg_new): Set up logger-fd and diagnostics.
(gpg_getauditlog): New. Copy diagnostics to a user data.
(engine_ops): Add getauditlog.
* src/engine-gpgsm.c (gpgsm_getauditlog): Return not implemented
for GPGME_AUDITLOG_DIAG.
* src/getauditlog.c (getauditlog_start): Don't reset engine
for diagnostics.
* src/gpgme.h.in (GPGME_AUDITLOG_DIAG): New.
(GPGME_AUDITLOG_DEFAULT): New alias to 0.
* tests/run-decrypt.c (show_usage, main): Add --diagnostics.
* doc/gpgme.texi(Additional Logs): Document getauditlog.
--
This enables users of GPGME to get more verbose information
from gpg which can assist users in figuring out a problem
that was before hidden behind a generalized error like
"Decryption Failed".
For GPGSM it is not yet available as it is problematic to
get it properly in server mode and GPGSM already had the
original audit log mechanism in place.
GPGME_AUDITLOG_DEFAULT was added for a more explicit
documentation.
* src/gpgme.h.in (_gpgme_op_decrypt_result): Add flag
legacy_cipher_nomdc.
* src/decrypt.c (parse_status_error): Set this flag.
* tests/run-decrypt.c (print_result): print it.
(main): Print the result even on error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/decrypt.c (struct op_data_t): Add field not_integrity_protected.
(parse_decryption_info): Set this. Also rename mode to aead_algo for
clarity.
(_gpgme_decrypt_status_handler): Force failure in case of a missing
MDC.
--
This extra check makes sure that a missing or stripped MDC in
- gpg < 2.1
- or gpg 2.2 with an old cipher algorithm
will lead to a decryption failure. gpg 2.3 will always fail in this
case. Implementing this check here and not backporting the 2.3 change
to 2.2 has the benefit that all GPGME using applications are protected
but scripts relying on rfc2440 (i.e. without MDC) will only break when
migrating to 2.3.
Note that S/MIME has no integrity protection mechanism but gpgsm
neither emits a DECRYPTION_INFO status line, so an error will not be
triggered. If in the future gpgsm supports authenticated encryption
it may issue a DECRYPTION_INFO line to force a failure here but it
will in that case also emit a DECRYPTION_FAILED anyway.
GnuPG-bug-id: 3981
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/op-support.c (_gpgme_parse_plaintext): Add arg r_mime.
* src/decrypt.c (_gpgme_decrypt_status_handler): Ser mime flag.
* src/verify.c (_gpgme_verify_status_handler): Ditto.
* src/gpgme.h.in (gpgme_op_verify_result_t): Append fields 'is_mime'
and '_unused'.
(gpgme_op_decrypt_result_t): New field 'is_mime'. Shrink '_unused'.
* tests/run-decrypt.c (print_result): Print MIME flag.
* tests/run-verify.c (print_result): Ditto.
--
Note that this flag (Liternal Data packet's 'm' mode) is only
specified in RFC-4880bis. To use it you currently need to add
"rfc4880bis" to the the gpg.conf.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/engine-gpg.c (append_args_from_recipients_string): Add new
flags.
--
Now you can use gpgme to encrypt without first importing a key.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/engine-gpg.c (struct engine_gpg): New flag.offline.
(gpg_set_engine_flags): Set it. Also fix setting of no_symkey_cache.
(build_argv): Pass --disable-dirmngr in offline mode.
--
GnuPG-bug-id: 3831
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (gpgme_op_encrypt_ext_start) New.
(gpgme_op_encrypt_ext): New.
(gpgme_op_encrypt_sign_ext_start): New.
(gpgme_op_encrypt_sign_ext): New.
* src/libgpgme.vers, tests/run-encrypt.c: Add them.
* src/encrypt.c (encrypt_start): Add arg recpstring.
(gpgme_op_encrypt): Factor code out to ...
(gpgme_op_encrypt_ext): new function with new arg recpstring.
(gpgme_op_encrypt_start): Factor code out to ...
(gpgme_op_encrypt_ext_start): new function with new arg recpstring.
* src/encrypt-sign.c (encrypt_sign_start): Add arg recpstring.
(gpgme_op_encrypt_sign): Factor code out to ...
(gpgme_op_encrypt_sign_ext): new function with new arg recpstring.
(gpgme_op_encrypt_sign_start): Factor code out to ...
(gpgme_op_encrypt_sign_ext_start): new function with new arg
recpstring.
* src/engine-backend.h (struct engine_ops): Change fields encrypt and
encrypt_sign.
* src/engine.c (_gpgme_engine_op_encrypt): Add arg recpstring and pass
to engine.
(_gpgme_engine_op_encrypt_sign): Ditto.
* src/engine-gpg.c (append_args_from_recipients_string): New.
(gpg_encrypt): Add arg recpstring and call new function as needed.
(gpg_encrypt_sign): Ditto.
* src/engine-gpgsm.c (set_recipients_from_string): New.
(gpgsm_encrypt): Add arg recpstring and call new function as needed.
* src/engine-uiserver.c (set_recipients_from_string): New.
(uiserver_encrypt): Add arg recpstring and call new function as
needed.
* tests/run-encrypt.c (xstrdup): New.
(main): Add option --keystring.
* src/gpgme-json.c (get_keys): Simplify.
(op_encrypt): Modify to make use of the extended encrypt function.
--
This new feature can be used to avoid the need for a key lookup and
thus several extra calls to the backend.
Note that run-test uses a semicolon as delimiter because that make
testing the feature on the command line much easier.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (_gpgme_op_import_result): Move new field
'skipped_v3_keys' to the end.
--
The ABI break has not made it into a release.
Also document the new field.
Fixes-commit: a630a1e3e7
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/data.c (_gpgme_data_new): Check for failed selftest.
* tests/run-support.h (make_filename): Print a message on mallooc
failure.
(init_gpgme_basic): New.
* tests/run-identify.c (main): Call init_gpgme_basic becuase we do not
need to setup a protocol.
* tests/t-data.c: Define PGM and include run-support.h.
(make_filename): Remove.
(main): Call init_gpgme_basic.
--
Note: This patch may break applications which used gpgme_data but no
gpgme_new without having called the required gpgme_check_version.
GPGME can be used without a protocol for example to work with the data
object abstraction. Thus a call to gpgme_data_new also needs to check
the result of the core selftests - including on whether
gpgme_check_version has been called.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.c (gpgme_set_ctx_flag, gpgme_get_ctx_flag): New flag
"auto-key-retrieve".
* src/context.h (gpgme_context): New field auto_key_retrieve.
* src/engine-backend.h (struct engine_ops): Add arg auto_key_retrieve
to field 'decrypt'.
* src/engine-gpg.c (gpg_decrypt): Add arg auto_key_retrieve and pass
option --auto-key-retrieve to gpg. Adjust all callers.
(gpg_verify): Ditto.
* src/engine-gpgsm.c (gpgsm_decrypt): Add dummy arg auto_key_retrieve.
* src/engine-uiserver.c (uiserver_decrypt): Ditto.
* tests/run-verify.c (main): Add option --auto-key-retrieve.
--
This makes the --auto-key-retrieve option available in the GPGME API.
Test plan:
Run
GPGME_DEBUG=9:out tests/run-verify SIGNEDFILE
with and without its new option --auto-key-retrieve and check in the
trace stored in "out" whether --auto-key-retrieve was passed to gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpgme.texi (since): New macro. Use it to add version
information to those APIs that are mentioned in the NEWS file.
Signed-off-by: Marcus Brinkmann <mb@g10code.com>
GnuPG-bug-id: 3137
* src/decrypt.c (op_data_t): Add flag any_no_seckey.
(_gpgme_decrypt_status_handler): Consult that flag.
(_gpgme_decrypt_status_handler): Set that flag.
--
The NO_SECKEY is emitted instead of an "S ERROR pkdecrypt_failed" if
gpg knowns that a key has been encrypted to that key (cf. "S ENC_TO").
it is not fool proffof but in the majority of cases we can provide a
better error message than just DECRYPTION_FAILED.
GnuPG-bug-id: 3270
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpgme.texi (Passphrase Callback): Mention pinentry_mode and
restrictions.
(Pinentry Mode): Fix wording and clarify versions that need
loopback mode for passphrase_cb to work.
