aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/platform
Commit message (Collapse)AuthorAgeFilesLines
* BackMerge tag 'v6.15-rc5' into drm-nextDave Airlie2025-05-0618-110/+318
|\ | | | | | | | | | | Linux 6.15-rc5, requested by tzimmerman for fixes required in drm-next. Signed-off-by: Dave Airlie <[email protected]>
| * platform/x86: ideapad-laptop: add support for some new buttonsGašper Nemgar2025-04-231-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | Add entries to unsupported WMI codes in ideapad_keymap[] and one check for WMI code 0x13d to trigger platform_profile_cycle(). Signed-off-by: Gašper Nemgar <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] [ij: joined nested if ()s & major tweaks to changelog] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| * platform/x86: asus-wmi: Disable OOBE state after resume from hibernationPavel Nikulin2025-04-231-1/+10
| | | | | | | | | | | | | | | | | | | | | | ASUS firmware resets OOBE state during S4 suspend, so the keyboard blinks during resume from hibernation. This patch disables OOBE state after resume from hibernation. Signed-off-by: Pavel Nikulin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| * platform/x86: alienware-wmi-wmax: Add support for Alienware m15 R7Kurt Borja2025-04-231-0/+8
| | | | | | | | | | | | | | | | | | | | | | Extend thermal control support to Alienware m15 R7. Cc: [email protected] Tested-by: Romain THERY <[email protected]> Signed-off-by: Kurt Borja <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| * platform/x86/intel: hid: Add Pantherlake supportSaranya Gopal2025-04-231-10/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | Add Pantherlake ACPI device ID to the Intel HID driver. While there, clean up the device ID table to remove the ", 0" parts. Suggested-by: Andy Shevchenko <[email protected]> Signed-off-by: Saranya Gopal <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| * platform/x86: alienware-wmi-wmax: Fix uninitialized variable due to bad ↵Kurt Borja2025-04-171-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | error handling wmax_thermal_information() may also return -ENOMSG, which would leave `id` uninitialized in thermal_profile_probe. Reorder and modify logic to catch all errors. Reported-by: Dan Carpenter <[email protected]> Closes: https://lore.kernel.org/r/[email protected] Fixes: 27e9e6339896 ("platform/x86: alienware-wmi: Refactor thermal control methods") Signed-off-by: Kurt Borja <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| * platform/x86/intel-uncore-freq: Fix missing uncore sysfs during CPU hotplugShouye Liu2025-04-171-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In certain situations, the sysfs for uncore may not be present when all CPUs in a package are offlined and then brought back online after boot. This issue can occur if there is an error in adding the sysfs entry due to a memory allocation failure. Retrying to bring the CPUs online will not resolve the issue, as the uncore_cpu_mask is already set for the package before the failure condition occurs. This issue does not occur if the failure happens during module initialization, as the module will fail to load in the event of any error. To address this, ensure that the uncore_cpu_mask is not set until the successful return of uncore_freq_add_entry(). Fixes: dbce412a7733 ("platform/x86/intel-uncore-freq: Split common and enumeration part") Signed-off-by: Shouye Liu <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| * platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cyclesMario Limonciello2025-04-171-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an APU exits HW sleep with no active wake sources the Linux kernel will rapidly assert that the APU can enter back into HW sleep. This happens in a few ms. Contrasting this to Windows, Windows can take 10s of seconds to enter back into the resiliency phase for Modern Standby. For some situations this can be problematic because it can cause leakage from VDDCR_SOC to VDD_MISC and force VDD_MISC outside of the electrical design guide specifications. On some designs this will trip the over voltage protection feature (OVP) of the voltage regulator module, but it could cause APU damage as well. To prevent this risk, add an explicit sleep call so that future attempts to enter into HW sleep will have enough time to settle. This will occur while the screen is dark and only on cases that the APU should enter HW sleep again, so it shouldn't be noticeable to any user. Cc: [email protected] Signed-off-by: Mario Limonciello <[email protected]> Acked-by: Shyam Sundar S K <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| * platform/x86: msi-wmi-platform: Workaround a ACPI firmware bugArmin Wolf2025-04-161-32/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ACPI byte code inside the ACPI control method responsible for handling the WMI method calls uses a global buffer for constructing the return value, yet the ACPI control method itself is not marked as "Serialized". This means that calling WMI methods on this WMI device is not thread-safe, as concurrent WMI method calls will corrupt the global buffer. Fix this by serializing the WMI method calls using a mutex. Cc: [email protected] # 6.x.x: 912d614ac99e: platform/x86: msi-wmi-platform: Rename "data" variable Fixes: 9c0beb6b29e7 ("platform/x86: wmi: Add MSI WMI Platform driver") Tested-by: Antheas Kapenekakis <[email protected]> Signed-off-by: Armin Wolf <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| * platform/x86: msi-wmi-platform: Rename "data" variableArmin Wolf2025-04-151-4/+4
| | | | | | | | | | | | | | | | | | | | | | Rename the "data" variable inside msi_wmi_platform_read() to avoid a name collision when the driver adds support for a state container struct (that is to be called "data" too) in the future. Signed-off-by: Armin Wolf <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| * platform/x86: alienware-wmi-wmax: Extend support to more laptopsKurt Borja2025-04-151-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend thermal control support to: - Alienware Area-51m R2 - Alienware m16 R1 - Alienware m16 R2 - Dell G16 7630 - Dell G5 5505 SE Cc: [email protected] Signed-off-by: Kurt Borja <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| * platform/x86: alienware-wmi-wmax: Add G-Mode support to Alienware m16 R1Kurt Borja2025-04-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | Some users report the Alienware m16 R1 models, support G-Mode. This was manually verified by inspecting their ACPI tables. Cc: [email protected] Signed-off-by: Kurt Borja <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| * platform/x86: amd: pmf: Fix STT limitsMario Limonciello2025-04-116-12/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some platforms it has been observed that STT limits are not being applied properly causing poor performance as power limits are set too low. STT limits that are sent to the platform are supposed to be in Q8.8 format. Convert them before sending. Reported-by: Yijun Shen <[email protected]> Fixes: 7c45534afa443 ("platform/x86/amd/pmf: Add support for PMF Policy Binary") Cc: [email protected] Tested-by: Yijun Shen <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Acked-by: Shyam Sundar S K <[email protected]> Reviewed-by: Ilpo Järvinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ilpo Järvinen <[email protected]>
| * mlxbf-bootctl: use sysfs_emit_at() in secure_boot_fuse_state_show()David Thompson2025-04-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A warning is seen when running the latest kernel on a BlueField SOC: [251.512704] ------------[ cut here ]------------ [251.512711] invalid sysfs_emit: buf:0000000003aa32ae [251.512720] WARNING: CPU: 1 PID: 705264 at fs/sysfs/file.c:767 sysfs_emit+0xac/0xc8 The warning is triggered because the mlxbf-bootctl driver invokes "sysfs_emit()" with a buffer pointer that is not aligned to the start of the page. The driver should instead use "sysfs_emit_at()" to support non-zero offsets into the destination buffer. Fixes: 9886f575de5a ("platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf()") Signed-off-by: David Thompson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| * platform/x86: x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V dataHans de Goede2025-04-113-0/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Vexia EDU ATLA 10 tablet comes in 2 different versions with significantly different mainboards. The only outward difference is that the charging barrel on one is marked 5V and the other is marked 9V. Both are x86 ACPI tablets which ships with Android x86 as factory OS. with a DSDT which contains a bunch of I2C devices which are not actually there, causing various resource conflicts. Enumeration of these is skipped through the acpi_quirk_skip_i2c_client_enumeration(). Extend the existing support for the 9V version by adding support for manually instantiating the I2C devices which are actually present on the 5V version by adding the necessary device info to the x86-android-tablets module. Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| * platform/x86: x86-android-tablets: Add "9v" to Vexia EDU ATLA 10 tablet symbolsHans de Goede2025-04-113-34/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Vexia EDU ATLA 10 tablet comes in 2 different versions with significantly different mainboards. The only outward difference is that the charging barrel on one is marked 5V and the other is marked 9V. Both need to be handled by the x86-android-tablets code. Add 9v to the symbols for the existing support for the 9V Vexia EDU ATLA 10 tablet symbols to prepare for adding support for the 5V version. All this patch does is s/vexia_edu_atla10_info/vexia_edu_atla10_9v_info/. Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| * asus-laptop: Fix an uninitialized variableDenis Arefev2025-04-111-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The value returned by acpi_evaluate_integer() is not checked, but the result is not always successful, so it is necessary to add a check of the returned value. If the result remains negative during three iterations of the loop, then the uninitialized variable 'val' will be used in the clamp_val() macro, so it must be initialized with the current value of the 'curr' variable. In this case, the algorithm should be less noisy. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: b23910c2194e ("asus-laptop: Pegatron Lucid accelerometer") Cc: [email protected] Signed-off-by: Denis Arefev <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
* | platform: arm64: acer-aspire1-ec: convert to devm_drm_bridge_alloc() APILuca Ceresoli2025-04-291-4/+3
| | | | | | | | | | | | | | | | | | This is the new API for allocating DRM bridges. Acked-by: Ilpo Järvinen <[email protected]> Signed-off-by: Luca Ceresoli <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20250424-drm-bridge-convert-to-alloc-api-v2-2-8f91a404d86b@bootlin.com Signed-off-by: Louis Chauvet <[email protected]>
* | Merge drm/drm-next into drm-misc-nextThomas Zimmermann2025-04-0776-2234/+5625
|\| | | | | | | | | | | | | Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST. Signed-off-by: Thomas Zimmermann <[email protected]>
| * treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner2025-04-053-3/+3
| | | | | | | | | | | | | | | | | | | | timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
| * Merge tag 'platform-drivers-x86-v6.15-2' of ↵Linus Torvalds2025-04-043-11/+30
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Ilpo Järvinen: - thinkpad_acpi: - Fix NULL pointer dereferences while probing - Disable ACPI fan access for T495* and E560 - ISST: Correct command storage data length * tag 'platform-drivers-x86-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: MAINTAINERS: consistently use my dedicated email address platform/x86: ISST: Correct command storage data length platform/x86: thinkpad_acpi: disable ACPI fan access for T495* and E560 platform/x86: thinkpad_acpi: Fix NULL pointer dereferences while probing
| | * MAINTAINERS: consistently use my dedicated email addressThomas Weißschuh2025-04-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I use a dedicated address for kernel development. Unfortunately at some point I used another address and later copied it around to other places. Consistently use the dedicated address everywhere. As the old address does in fact work, an update to mailmap is not necessary. Signed-off-by: Thomas Weißschuh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| | * platform/x86: ISST: Correct command storage data lengthSrinivas Pandruvada2025-04-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After resume/online turbo limit ratio (TRL) is restored partially if the admin explicitly changed TRL from user space. A hash table is used to store SST mail box and MSR settings when modified to restore those settings after resume or online. This uses a struct isst_cmd field "data" to store these settings. This is a 64 bit field. But isst_store_new_cmd() is only assigning as u32. This results in truncation of 32 bits. Change the argument to u64 from u32. Fixes: f607874f35cb ("platform/x86: ISST: Restore state on resume") Signed-off-by: Srinivas Pandruvada <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| | * platform/x86: thinkpad_acpi: disable ACPI fan access for T495* and E560Eduard Christian Dumitrescu2025-04-011-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T495, T495s, and E560 laptops have the FANG+FANW ACPI methods (therefore fang_handle and fanw_handle are not NULL) but they do not actually work, which results in a "No such device or address" error. The DSDT table code for the FANG+FANW methods doesn't seem to do anything special regarding the fan being secondary. The bug was introduced in commit 57d0557dfa49 ("platform/x86: thinkpad_acpi: Add Thinkpad Edge E531 fan support"), which added a new fan control method via the FANG+FANW ACPI methods. Add a quirk for T495, T495s, and E560 to avoid the FANG+FANW methods. Fan access and control is restored after forcing the legacy non-ACPI fan control method by setting both fang_handle and fanw_handle to NULL. Reported-by: Vlastimil Holer <[email protected]> Fixes: 57d0557dfa49 ("platform/x86: thinkpad_acpi: Add Thinkpad Edge E531 fan support") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219643 Cc: [email protected] Tested-by: Alireza Elikahi <[email protected]> Reviewed-by: Kurt Borja <[email protected]> Signed-off-by: Eduard Christian Dumitrescu <[email protected]> Co-developed-by: Seyediman Seyedarab <[email protected]> Signed-off-by: Seyediman Seyedarab <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| | * platform/x86: thinkpad_acpi: Fix NULL pointer dereferences while probingKurt Borja2025-04-011-8/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some subdrivers make use of the global reference tpacpi_pdev during initialization, which is called from the platform driver's probe. However, after the commit 38b9ab80db31 ("platform/x86: thinkpad_acpi: Move subdriver initialization to tpacpi_pdriver's probe.") this variable is only properly initialized *after* probing and this can result in a NULL pointer dereference. In order to fix this without reverting the commit, register the platform bundle in two steps, first create and initialize tpacpi_pdev, then register the driver synchronously with platform_driver_probe(). This way the benefits of commit 38b9ab80db31 are preserved. Additionally, the commit 43fc63a1e8f6 ("platform/x86: thinkpad_acpi: Move HWMON initialization to tpacpi_hwmon_pdriver's probe") introduced a similar problem, however tpacpi_sensors_pdev is only used once inside the probe, so replace the global reference with the one given by the probe. Reported-by: Damian Tometzki <[email protected]> Closes: https://lore.kernel.org/r/CAL=B37kdL1orSQZD2A3skDOevRXBzF__cJJgY_GFh9LZO3FMsw@mail.gmail.com/ Fixes: 38b9ab80db31 ("platform/x86: thinkpad_acpi: Move subdriver initialization to tpacpi_pdriver's probe.") Fixes: 43fc63a1e8f6 ("platform/x86: thinkpad_acpi: Move HWMON initialization to tpacpi_hwmon_pdriver's probe") Tested-by: Damian Tometzki <[email protected]> Tested-by: Gene C <[email protected]> Signed-off-by: Kurt Borja <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| * | Merge tag 'mm-nonmm-stable-2025-03-30-18-23' of ↵Linus Torvalds2025-04-011-1/+1
| |\ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - The series "powerpc/crash: use generic crashkernel reservation" from Sourabh Jain changes powerpc's kexec code to use more of the generic layers. - The series "get_maintainer: report subsystem status separately" from Vlastimil Babka makes some long-requested improvements to the get_maintainer output. - The series "ucount: Simplify refcounting with rcuref_t" from Sebastian Siewior cleans up and optimizing the refcounting in the ucount code. - The series "reboot: support runtime configuration of emergency hw_protection action" from Ahmad Fatoum improves the ability for a driver to perform an emergency system shutdown or reboot. - The series "Converge on using secs_to_jiffies() part two" from Easwar Hariharan performs further migrations from msecs_to_jiffies() to secs_to_jiffies(). - The series "lib/interval_tree: add some test cases and cleanup" from Wei Yang permits more userspace testing of kernel library code, adds some more tests and performs some cleanups. - The series "hung_task: Dump the blocking task stacktrace" from Masami Hiramatsu arranges for the hung_task detector to dump the stack of the blocking task and not just that of the blocked task. - The series "resource: Split and use DEFINE_RES*() macros" from Andy Shevchenko provides some cleanups to the resource definition macros. - Plus the usual shower of singleton patches - please see the individual changelogs for details. * tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits) mailmap: consolidate email addresses of Alexander Sverdlin fs/procfs: fix the comment above proc_pid_wchan() relay: use kasprintf() instead of fixed buffer formatting resource: replace open coded variant of DEFINE_RES() resource: replace open coded variants of DEFINE_RES_*_NAMED() resource: replace open coded variant of DEFINE_RES_NAMED_DESC() resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED() samples: add hung_task detector mutex blocking sample hung_task: show the blocker task if the task is hung on mutex kexec_core: accept unaccepted kexec segments' destination addresses watchdog/perf: optimize bytes copied and remove manual NUL-termination lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap() lib/interval_tree: skip the check before go to the right subtree lib/interval_tree: add test case for span iteration lib/interval_tree: add test case for interval_tree_iter_xxx() helpers lib/rbtree: add random seed lib/rbtree: split tests lib/rbtree: enable userland test suite for rbtree related data structure checkpatch: describe --min-conf-desc-length scripts/gdb/symbols: determine KASLR offset on s390 ...
| | * platform/x86: thinkpad_acpi: convert timeouts to secs_to_jiffies()Easwar Hariharan2025-03-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced secs_to_jiffies(). As the value here is a multiple of 1000, use secs_to_jiffies() instead of msecs_to_jiffies() to avoid the multiplication This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with the following Coccinelle rules: @depends on patch@ expression E; @@ -msecs_to_jiffies +secs_to_jiffies (E - * \( 1000 \| MSEC_PER_SEC \) ) Link: https://lkml.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-15-a43967e36c88@linux.microsoft.com Signed-off-by: Easwar Hariharan <[email protected]> Cc: Carlos Maiolino <[email protected]> Cc: Carlos Maiolino <[email protected]> Cc: Chris Mason <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Damien Le Maol <[email protected]> Cc: "Darrick J. Wong" <[email protected]> Cc: David Sterba <[email protected]> Cc: Dick Kennedy <[email protected]> Cc: Dongsheng Yang <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Frank Li <[email protected]> Cc: Hans de Goede <[email protected]> Cc: Henrique de Moraes Holschuh <[email protected]> Cc: Ilpo Jarvinen <[email protected]> Cc: Ilya Dryomov <[email protected]> Cc: James Bottomley <[email protected]> Cc: James Smart <[email protected]> Cc: Jaroslav Kysela <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Josef Bacik <[email protected]> Cc: Julia Lawall <[email protected]> Cc: Kalesh Anakkur Purayil <[email protected]> Cc: Keith Busch <[email protected]> Cc: Leon Romanovsky <[email protected]> Cc: Marc Kleine-Budde <[email protected]> Cc: Mark Brown <[email protected]> Cc: "Martin K. Petersen" <[email protected]> Cc: Nicolas Palix <[email protected]> Cc: Niklas Cassel <[email protected]> Cc: Oded Gabbay <[email protected]> Cc: Sagi Grimberg <[email protected]> Cc: Sascha Hauer <[email protected]> Cc: Sebastian Reichel <[email protected]> Cc: Selvin Thyparampil Xavier <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Shyam-sundar S-k <[email protected]> Cc: Takashi Iwai <[email protected]> Cc: Takashi Iwai <[email protected]> Cc: Xiubo Li <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
| | * platform/x86/amd/pmf: convert timeouts to secs_to_jiffies()Easwar Hariharan2025-03-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced secs_to_jiffies(). As the value here is a multiple of 1000, use secs_to_jiffies() instead of msecs_to_jiffies() to avoid the multiplication This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with the following Coccinelle rules: @depends on patch@ expression E; @@ -msecs_to_jiffies +secs_to_jiffies (E - * \( 1000 \| MSEC_PER_SEC \) ) Link: https://lkml.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-14-a43967e36c88@linux.microsoft.com Signed-off-by: Easwar Hariharan <[email protected]> Cc: Carlos Maiolino <[email protected]> Cc: Carlos Maiolino <[email protected]> Cc: Chris Mason <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Damien Le Maol <[email protected]> Cc: "Darrick J. Wong" <[email protected]> Cc: David Sterba <[email protected]> Cc: Dick Kennedy <[email protected]> Cc: Dongsheng Yang <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Frank Li <[email protected]> Cc: Hans de Goede <[email protected]> Cc: Henrique de Moraes Holschuh <[email protected]> Cc: Ilpo Jarvinen <[email protected]> Cc: Ilya Dryomov <[email protected]> Cc: James Bottomley <[email protected]> Cc: James Smart <[email protected]> Cc: Jaroslav Kysela <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Josef Bacik <[email protected]> Cc: Julia Lawall <[email protected]> Cc: Kalesh Anakkur Purayil <[email protected]> Cc: Keith Busch <[email protected]> Cc: Leon Romanovsky <[email protected]> Cc: Marc Kleine-Budde <[email protected]> Cc: Mark Brown <[email protected]> Cc: "Martin K. Petersen" <[email protected]> Cc: Nicolas Palix <[email protected]> Cc: Niklas Cassel <[email protected]> Cc: Oded Gabbay <[email protected]> Cc: Sagi Grimberg <[email protected]> Cc: Sascha Hauer <[email protected]> Cc: Sebastian Reichel <[email protected]> Cc: Selvin Thyparampil Xavier <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Shyam-sundar S-k <[email protected]> Cc: Takashi Iwai <[email protected]> Cc: Takashi Iwai <[email protected]> Cc: Xiubo Li <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
| | * platform/chrome: cros_ec_lpc: prepare for hw_protection_shutdown removalAhmad Fatoum2025-03-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the general case, a driver doesn't know which of system shutdown or reboot is the better action to take to protect hardware in an emergency situation. For this reason, hw_protection_shutdown is going to be removed in favor of hw_protection_trigger, which defaults to shutdown, but may be configured at kernel runtime to be a reboot instead. The ChromeOS EC situation is different as we do know that shutdown is the correct action as the EC is programmed to force reset after the short period, thus replace hw_protection_shutdown with __hw_protection_trigger with HWPROT_ACT_SHUTDOWN as argument to maintain the same behavior. No functional change. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ahmad Fatoum <[email protected]> Acked-by: Tzung-Bi Shih <[email protected]> Cc: Benson Leung <[email protected]> Cc: Daniel Lezcano <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Guenter Roeck <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Liam Girdwood <[email protected]> Cc: Lukasz Luba <[email protected]> Cc: Mark Brown <[email protected]> Cc: Matteo Croce <[email protected]> Cc: Matti Vaittinen <[email protected]> Cc: "Rafael J. Wysocki" <[email protected]> Cc: Rob Herring (Arm) <[email protected]> Cc: Rui Zhang <[email protected]> Cc: Sascha Hauer <[email protected]> Cc: "Serge E. Hallyn" <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
| * | Merge tag 'platform-drivers-x86-v6.15-1' of ↵Linus Torvalds2025-03-2654-2169/+5378
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform drivers updates from Ilpo Järvinen: - alienware-wmi: - Refactor and split WMAX/legacy drivers - dell-ddv: - Correct +0.1 offset in temperature - Use the power supply extension mechanism for battery temperatures - intel/pmc: - Refactor init to mostly use a common init function - Add support for Arrow Lake U/H - Add support for Panther Lake - intel/sst: - Improve multi die handling - Prefix header search path with sysroot (fixes cross-compiling) - lenovo-wmi-hotkey-utilities: - Support for mic & audio mute LEDs - samsung-galaxybook: - Add driver for Samsung Galaxy Book series - wmi: - Rework WCxx/WExx ACPI method handling - Enable data block collection when the data block is set - platform/arm: - Add Huawei Matebook E Go EC driver - platform/mellanox: - Relocate to drivers/platform/mellanox/ - mlxbf-bootctl: - RTC battery status sysfs support - Miscellaneous cleanups / refactoring / improvements * tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (75 commits) platform/x86: x86-android-tablets: Add select POWER_SUPPLY to Kconfig platform/x86/amd/pmf: convert timeouts to secs_to_jiffies() platform/x86: thinkpad_acpi: convert timeouts to secs_to_jiffies() irqdomain: platform/x86: Switch to irq_domain_create_linear() platform/x86/amd/pmc: fix leak in probe() tools/power/x86/intel-speed-select: v1.22 release tools/power/x86/intel-speed-select: Prefix header search path with sysroot tools/power/x86/intel-speed-select: Die ID for IO dies tools/power/x86/intel-speed-select: Fix the condition to check multi die system tools/power/x86/intel-speed-select: Prevent increasing MAX_DIE_PER_PACKAGE platform/x86/amd/pmc: Use managed APIs for mutex platform/x86/amd/pmc: Remove unnecessary line breaks platform/x86/amd/pmc: Move macros and structures to the PMC header file platform/x86/amd/pmc: Notify user when platform does not support s0ix transition platform/x86: dell-ddv: Use the power supply extension mechanism platform/x86: dell-ddv: Use devm_battery_hook_register platform/x86: dell-ddv: Fix temperature calculation platform/x86: thinkpad_acpi: check the return value of devm_mutex_init() platform/x86: samsung-galaxybook: Fix block_recording not supported logic platform/x86: dell-uart-backlight: Make dell_uart_bl_serdev_driver static ...
| | * | platform/x86: x86-android-tablets: Add select POWER_SUPPLY to KconfigHans de Goede2025-03-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit c78dd25138d1 ("platform/x86: x86-android-tablets: Add Vexia EDU ATLA 10 EC battery driver"), adds power_supply class registering to the x86-android-tablets code. Add "select POWER_SUPPLY" to the Kconfig entry to avoid these errors: ERROR: modpost: "power_supply_get_drvdata" [drivers/platform/x86/x86-android-tablets/vexia_atla10_ec.ko] undefined! ERROR: modpost: "power_supply_changed" [drivers/platform/x86/x86-android-tablets/vexia_atla10_ec.ko] undefined! ERROR: modpost: "devm_power_supply_register" [drivers/platform/x86/x86-android-tablets/vexia_atla10_ec.ko] undefined! When POWER_SUPPLY support is not enabled. Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| | * | platform/x86/amd/pmf: convert timeouts to secs_to_jiffies()Easwar Hariharan2025-03-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced secs_to_jiffies(). As the value here is a multiple of 1000, use secs_to_jiffies() instead of msecs_to_jiffies() to avoid the multiplication This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with the following Coccinelle rules: @depends on patch@ expression E; @@ -msecs_to_jiffies +secs_to_jiffies (E - * \( 1000 \| MSEC_PER_SEC \) ) Signed-off-by: Easwar Hariharan <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Link: https://lore.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-14-a43967e36c88@linux.microsoft.com Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| | * | platform/x86: thinkpad_acpi: convert timeouts to secs_to_jiffies()Easwar Hariharan2025-03-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced secs_to_jiffies(). As the value here is a multiple of 1000, use secs_to_jiffies() instead of msecs_to_jiffies() to avoid the multiplication This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with the following Coccinelle rules: @depends on patch@ expression E; @@ -msecs_to_jiffies +secs_to_jiffies (E - * \( 1000 \| MSEC_PER_SEC \) ) Signed-off-by: Easwar Hariharan <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Link: https://lore.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-15-a43967e36c88@linux.microsoft.com Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| | * | irqdomain: platform/x86: Switch to irq_domain_create_linear()Jiri Slaby (SUSE)2025-03-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | irq_domain_add_linear() is going away as being obsolete now. Switch to the preferred irq_domain_create_linear(). That differs in the first parameter: It takes more generic struct fwnode_handle instead of struct device_node. The first parameter is NULL here so nothing else needs to be done. Signed-off-by: Jiri Slaby (SUSE) <[email protected]> Link: https://lore.kernel.org/r/[email protected] [ij: Removed unnecessary details from the commit message.] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| | * | platform/x86/amd/pmc: fix leak in probe()Dan Carpenter2025-03-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Call pci_dev_put(rdev) before returning. Fixes: 6ad1b2dc0f2a ("platform/x86/amd/pmc: Use managed APIs for mutex") Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| | * | platform/x86/amd/pmc: Use managed APIs for mutexShyam Sundar S K2025-03-071-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adopt managed devm_* APIs for handling mutex creation and deletion, facilitating automatic resource cleanup. Co-developed-by: Sanket Goswami <[email protected]> Signed-off-by: Sanket Goswami <[email protected]> Signed-off-by: Shyam Sundar S K <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| | * | platform/x86/amd/pmc: Remove unnecessary line breaksShyam Sundar S K2025-03-071-13/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enhance code readability by fixing line break and blank line inconsistencies. Also make the return variable "rc" as function level local. Co-developed-by: Sanket Goswami <[email protected]> Signed-off-by: Sanket Goswami <[email protected]> Signed-off-by: Shyam Sundar S K <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| | * | platform/x86/amd/pmc: Move macros and structures to the PMC header fileShyam Sundar S K2025-03-072-81/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To improve the code organization and readability, move the macros and structures from the AMD PMC driver to the PMC header file. Co-developed-by: Sanket Goswami <[email protected]> Signed-off-by: Sanket Goswami <[email protected]> Signed-off-by: Shyam Sundar S K <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| | * | platform/x86/amd/pmc: Notify user when platform does not support s0ix transitionShyam Sundar S K2025-03-072-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some of the AMD platforms do not support modern standby, so when such CPU ID is detected, a warning message will be displayed to the user. Reviewed-by: Mario Limonciello <[email protected]> Co-developed-by: Sanket Goswami <[email protected]> Signed-off-by: Sanket Goswami <[email protected]> Signed-off-by: Shyam Sundar S K <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| | * | platform/x86: dell-ddv: Use the power supply extension mechanismArmin Wolf2025-03-071-30/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the power supply extension mechanism for registering the battery temperature properties so that they can show up in the hwmon device associated with the ACPI battery. Signed-off-by: Armin Wolf <[email protected]> Reviewed-by: Sebastian Reichel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| | * | platform/x86: dell-ddv: Use devm_battery_hook_registerArmin Wolf2025-03-071-10/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use devm_battery_hook_register() instead of manually calling devm_add_action_or_reset() to simplify the code. Signed-off-by: Armin Wolf <[email protected]> Reviewed-by: Sebastian Reichel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| | * | platform/x86: dell-ddv: Fix temperature calculationArmin Wolf2025-03-071-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the Dell Inspiron 3505 the battery temperature is always 0.1 degrees larger than the temperature show inside the OEM application. Emulate this behaviour to avoid showing strange looking values like 29.1 degrees. Fixes: 0331b1b0ba653 ("platform/x86: dell-ddv: Fix temperature scaling") Signed-off-by: Armin Wolf <[email protected]> Reviewed-by: Sebastian Reichel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| | * | platform/x86: thinkpad_acpi: check the return value of devm_mutex_init()Bartosz Golaszewski2025-03-051-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | devm_mutex_init() can fail so check its return value. Fixes: 38b9ab80db31 ("platform/x86: thinkpad_acpi: Move subdriver initialization to tpacpi_pdriver's probe.") Signed-off-by: Bartosz Golaszewski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| | * | platform/x86: samsung-galaxybook: Fix block_recording not supported logicJoshua Grisham2025-03-051-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes logic error when block_recording is not supported but the fw attr was being added anyway (reported by GitHub user bbregeault). Tested myself on a Samsung Galaxy Book2 Pro (has block_recording) and by bbregeault on a Galaxy Book2 Business (does not have block_recording). Fixes: 56f529ce4370 ("platform/x86: samsung-galaxybook: Add samsung-galaxybook driver") Signed-off-by: Joshua Grisham <[email protected]> Reviewed-by: Armin Wolf <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| | * | platform/x86: dell-uart-backlight: Make dell_uart_bl_serdev_driver staticIlpo Järvinen2025-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sparse reports: dell-uart-backlight.c:328:29: warning: symbol 'dell_uart_bl_serdev_driver' was not declared. Should it be static? Fix it by making the symbol static. Fixes: 484bae9e4d6ac ("platform/x86: Add new Dell UART backlight driver") Reviewed-by: Mario Limonciello <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ilpo Järvinen <[email protected]> Reviewed-by: Ilpo Järvinen <[email protected]>
| | * | platform/x86: lenovo-yoga-tab2-pro-1380-fastcharger: Make symbol staticIlpo Järvinen2025-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sparse reports: lenovo-yoga-tab2-pro-1380-fastcharger.c:222:29: warning: symbol 'yt2_1380_fc_serdev_driver' was not declared. Should it be static? Fix that by making the symbol static. Fixes: b2ed33e8d486a ("platform/x86: Add lenovo-yoga-tab2-pro-1380-fastcharger driver") Reviewed-by: Mario Limonciello <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ilpo Järvinen <[email protected]> Reviewed-by: Ilpo Järvinen <[email protected]>
| | * | platform/x86:lenovo-wmi-hotkey-utilities.c: Support for mic and audio mute LEDsJackie Dong2025-03-033-0/+224
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement Lenovo utility data WMI calls needed to make LEDs work on Ideapads that support this GUID. This enables the mic and audio LEDs to be updated correctly. Tested on below samples. ThinkBook 13X Gen4 IMH ThinkBook 14 G6 ABP ThinkBook 16p Gen4-21J8 ThinkBook 16 G8 IRL ThinkBook 16 G7+ ASP Signed-off-by: Jackie Dong <[email protected]> Suggested-by: Mark Pearson <[email protected]> Reviewed-by: Kurt Borja <[email protected]> Reviewed-by: Ilpo Järvinen <[email protected]> Reviewed-by: Armin Wolf <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ilpo Järvinen <[email protected]>
| | * | platform/x86: hp-bioscfg: Replace deprecated strncpy() with strscpy()Thorsten Blum2025-03-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since kstrtol() requires a NUL-terminated string as input and strncpy() is deprecated for NUL-terminated destination buffers, use strscpy() instead. Compile-tested only. Link: https://github.com/KSPP/linux/issues/90 Cc: [email protected] Signed-off-by: Thorsten Blum <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
| | * | platform: arm64: add Huawei Matebook E Go EC driverPengyu Luo2025-03-033-0/+847
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are three variants of which Huawei released the first two simultaneously. Huawei Matebook E Go LTE(sc8180x), codename seems to be gaokun2. Huawei Matebook E Go([email protected]), codename must be gaokun3. (see [1]) Huawei Matebook E Go 2023([email protected]), codename should be also gaokun3. Adding support for the latter two variants for now, this driver should also work for the sc8180x variant according to acpi table files, but I don't have the device to test yet. Different from other Qualcomm Snapdragon sc8280xp based machines, the Huawei Matebook E Go uses an embedded controller while others use a system called PMIC GLink. This embedded controller can be used to perform a set of various functions, including, but not limited to: - Battery and charger monitoring; - Charge control and smart charge; - Fn_lock settings; - Tablet lid status; - Temperature sensors; - USB Type-C notifications (ports orientation, DP alt mode HPD); - USB Type-C PD (according to observation, up to 48w). Add a driver for the EC which creates devices for UCSI and power supply devices. This driver is inspired by the following drivers: drivers/platform/arm64/acer-aspire1-ec.c drivers/platform/arm64/lenovo-yoga-c630.c drivers/platform/x86/huawei-wmi.c Also thanks for reviewers' working. They have made this patch improve a lot. [1] https://bugzilla.kernel.org/show_bug.cgi?id=219645 Signed-off-by: Pengyu Luo <[email protected]> Reviewed-by: Ilpo Järvinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ilpo Järvinen <[email protected]>
| | * | platform/x86: intel: Use *-y instead of *-objs in MakefileKurt Borja2025-02-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The `objs` suffix is reserved for user-space tools. Use the `y` suffix instead, which is usually used for kernel drivers. Suggested-by: Andy Shevchenko <[email protected]> Signed-off-by: Kurt Borja <[email protected]> Reviewed-by: Jithu Joseph <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
generated by cgit (git 2.51.2) at 2025-12-02 14:26:21 +0000