aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ice/ice_lib.c
Commit message (Collapse)AuthorAgeFilesLines
* ice: use irq_update_affinity_hint()Michal Schmidt2024-06-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | irq_set_affinity_hint() is deprecated. Use irq_update_affinity_hint() instead. This removes the side-effect of actually applying the affinity. The driver does not really need to worry about spreading its IRQs across CPUs. The core code already takes care of that. On the contrary, when the driver applies affinities by itself, it breaks the users' expectations: 1. The user configures irqbalance with IRQBALANCE_BANNED_CPULIST in order to prevent IRQs from being moved to certain CPUs that run a real-time workload. 2. ice reconfigures VSIs at runtime due to a MIB change (ice_dcb_process_lldp_set_mib_change). Reopening a VSI resets the affinity in ice_vsi_req_irq_msix(). 3. ice has no idea about irqbalance's config, so it may move an IRQ to a banned CPU. The real-time workload suffers unacceptable latency. I am not sure if updating the affinity hints is at all useful, because irqbalance ignores them since 2016 ([1]), but at least it's harmless. This ice change is similar to i40e commit d34c54d1739c ("i40e: Use irq_update_affinity_hint()"). [1] https://github.com/Irqbalance/irqbalance/commit/dcc411e7bfdd Signed-off-by: Michal Schmidt <[email protected]> Reviewed-by: Sunil Goutham <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-3-d1470cee3347@intel.com Signed-off-by: Jakub Kicinski <[email protected]>
* ice: map XDP queues to vectors in ice_vsi_map_rings_to_vectors()Larysa Zaremba2024-06-061-7/+7
| | | | | | | | | | | | | | | | | | | ice_pf_dcb_recfg() re-maps queues to vectors with ice_vsi_map_rings_to_vectors(), which does not restore the previous state for XDP queues. This leads to no AF_XDP traffic after rebuild. Map XDP queues to vectors in ice_vsi_map_rings_to_vectors(). Also, move the code around, so XDP queues are mapped independently only through .ndo_bpf(). Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Reviewed-by: Przemek Kitszel <[email protected]> Signed-off-by: Larysa Zaremba <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Chandan Kumar Rout <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-5-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski <[email protected]>
* ice: add flag to distinguish reset from .ndo_bpf in XDP rings configLarysa Zaremba2024-06-061-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") has placed ice_vsi_free_q_vectors() after ice_destroy_xdp_rings() in the rebuild process. The behaviour of the XDP rings config functions is context-dependent, so the change of order has led to ice_destroy_xdp_rings() doing additional work and removing XDP prog, when it was supposed to be preserved. Also, dependency on the PF state reset flags creates an additional, fortunately less common problem: * PFR is requested e.g. by tx_timeout handler * .ndo_bpf() is asked to delete the program, calls ice_destroy_xdp_rings(), but reset flag is set, so rings are destroyed without deleting the program * ice_vsi_rebuild tries to delete non-existent XDP rings, because the program is still on the VSI * system crashes With a similar race, when requested to attach a program, ice_prepare_xdp_rings() can actually skip setting the program in the VSI and nevertheless report success. Instead of reverting to the old order of function calls, add an enum argument to both ice_prepare_xdp_rings() and ice_destroy_xdp_rings() in order to distinguish between calls from rebuild and .ndo_bpf(). Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Igor Bagnucki <[email protected]> Signed-off-by: Larysa Zaremba <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Chandan Kumar Rout <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-4-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski <[email protected]>
* ice: remove af_xdp_zc_qps bitmapLarysa Zaremba2024-06-061-8/+0
| | | | | | | | | | | | | | | | | | | | | | | Referenced commit has introduced a bitmap to distinguish between ZC and copy-mode AF_XDP queues, because xsk_get_pool_from_qid() does not do this for us. The bitmap would be especially useful when restoring previous state after rebuild, if only it was not reallocated in the process. This leads to e.g. xdpsock dying after changing number of queues. Instead of preserving the bitmap during the rebuild, remove it completely and distinguish between ZC and copy-mode queues based on the presence of a device associated with the pool. Fixes: e102db780e1c ("ice: track AF_XDP ZC enabled queues in bitmap") Reviewed-by: Przemek Kitszel <[email protected]> Signed-off-by: Larysa Zaremba <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Chandan Kumar Rout <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-3-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski <[email protected]>
* ice: refactor struct ice_vsi_cfg_params to be inside of struct ice_vsiMateusz Polchlopek2024-05-061-22/+11
| | | | | | | | | | | | | | | Refactor struct ice_vsi_cfg_params to be embedded into struct ice_vsi. Prior to that the members of the struct were scattered around ice_vsi, and were copy-pasted for purposes of reinit. Now we have struct handy, and it is easier to have something sticky in the flags field. Suggested-by: Przemek Kitszel <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Reviewed-by: Vaishnavi Tipireddy <[email protected]> Signed-off-by: Mateusz Polchlopek <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* ice: move devlink port code to a separate filePiotr Raczynski2024-04-011-1/+0
| | | | | | | | | | | | | | | Keep devlink related code in a separate file. More devlink port code and handlers will be added here for other port operations. Remove no longer needed include of our devlink.h in ice_lib.c. Reviewed-by: Przemek Kitszel <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Piotr Raczynski <[email protected]> Signed-off-by: Michal Swiatkowski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* ice: move ice_devlink.[ch] to devlink folderMichal Swiatkowski2024-04-011-1/+1
| | | | | | | | | | | | | | | | Only moving whole files, fixing Makefile and bunch of includes. Some changes to ice_devlink file was done even in representor part (Tx topology), so keep it as final patch to not mess up with rebasing. After moving to devlink folder there is no need to have such long name for these files. Rename them to simple devlink. Reviewed-by: Aleksandr Loktionov <[email protected]> Signed-off-by: Michal Swiatkowski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* Merge branch '100GbE' of ↵Jakub Kicinski2024-03-291-48/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ice: use less resources in switchdev Michal Swiatkowski says: Switchdev is using one queue per created port representor. This can quickly lead to Rx queue shortage, as with subfunction support user can create high number of PRs. Save one MSI-X and 'number of PRs' * 1 queues. Refactor switchdev slow-path to use less resources (even no additional resources). Do this by removing control plane VSI and move its functionality to PF VSI. Even with current solution PF is acting like uplink and can't be used simultaneously for other use cases (adding filters can break slow-path). In short, do Tx via PF VSI and Rx packets using PF resources. Rx needs additional code in interrupt handler to choose correct PR netdev. Previous solution had to queue filters, it was way more elegant but needed one queue per PRs. Beside that this refactor mostly simplifies switchdev configuration. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: count representor stats ice: do switchdev slow-path Rx using PF VSI ice: change repr::id values ice: remove switchdev control plane VSI ice: control default Tx rule in lag ice: default Tx rule instead of to queue ice: do Tx through PF netdev in slow-path ice: remove eswitch changing queues algorithm ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
| * ice: remove switchdev control plane VSIMichal Swiatkowski2024-03-251-48/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | For slow-path Rx and Tx PF VSI is used. There is no need to have control plane VSI. Remove all code related to it. Eswitch rebuild can't fail without rebuilding control plane VSI. Return void from ice_eswitch_rebuild(). Reviewed-by: Marcin Szycik <[email protected]> Signed-off-by: Michal Swiatkowski <[email protected]> Tested-by: Sujai Buvaneswaran <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
* | ice: fix memory corruption bug with suspend and rebuildJesse Brandeburg2024-03-251-9/+9
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ice driver would previously panic after suspend. This is caused from the driver *only* calling the ice_vsi_free_q_vectors() function by itself, when it is suspending. Since commit b3e7b3a6ee92 ("ice: prevent NULL pointer deref during reload") the driver has zeroed out num_q_vectors, and only restored it in ice_vsi_cfg_def(). This further causes the ice_rebuild() function to allocate a zero length buffer, after which num_q_vectors is updated, and then the new value of num_q_vectors is used to index into the zero length buffer, which corrupts memory. The fix entails making sure all the code referencing num_q_vectors only does so after it has been reset via ice_vsi_cfg_def(). I didn't perform a full bisect, but I was able to test against 6.1.77 kernel and that ice driver works fine for suspend/resume with no panic, so sometime since then, this problem was introduced. Also clean up an un-needed init of a local variable in the function being modified. PANIC from 6.8.0-rc1: [1026674.915596] PM: suspend exit [1026675.664697] ice 0000:17:00.1: PTP reset successful [1026675.664707] ice 0000:17:00.1: 2755 msecs passed between update to cached PHC time [1026675.667660] ice 0000:b1:00.0: PTP reset successful [1026675.675944] ice 0000:b1:00.0: 2832 msecs passed between update to cached PHC time [1026677.137733] ixgbe 0000:31:00.0 ens787: NIC Link is Up 1 Gbps, Flow Control: None [1026677.190201] BUG: kernel NULL pointer dereference, address: 0000000000000010 [1026677.192753] ice 0000:17:00.0: PTP reset successful [1026677.192764] ice 0000:17:00.0: 4548 msecs passed between update to cached PHC time [1026677.197928] #PF: supervisor read access in kernel mode [1026677.197933] #PF: error_code(0x0000) - not-present page [1026677.197937] PGD 1557a7067 P4D 0 [1026677.212133] ice 0000:b1:00.1: PTP reset successful [1026677.212143] ice 0000:b1:00.1: 4344 msecs passed between update to cached PHC time [1026677.212575] [1026677.243142] Oops: 0000 [#1] PREEMPT SMP NOPTI [1026677.247918] CPU: 23 PID: 42790 Comm: kworker/23:0 Kdump: loaded Tainted: G W 6.8.0-rc1+ #1 [1026677.257989] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [1026677.269367] Workqueue: ice ice_service_task [ice] [1026677.274592] RIP: 0010:ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.281421] Code: 0f 84 3a ff ff ff 41 0f b7 74 ec 02 66 89 b0 22 02 00 00 81 e6 ff 1f 00 00 e8 ec fd ff ff e9 35 ff ff ff 48 8b 43 30 49 63 ed <41> 0f b7 34 24 41 83 c5 01 48 8b 3c e8 66 89 b7 aa 02 00 00 81 e6 [1026677.300877] RSP: 0018:ff3be62a6399bcc0 EFLAGS: 00010202 [1026677.306556] RAX: ff28691e28980828 RBX: ff28691e41099828 RCX: 0000000000188000 [1026677.314148] RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff28691e41099828 [1026677.321730] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [1026677.329311] R10: 0000000000000007 R11: ffffffffffffffc0 R12: 0000000000000010 [1026677.336896] R13: 0000000000000000 R14: 0000000000000000 R15: ff28691e0eaa81a0 [1026677.344472] FS: 0000000000000000(0000) GS:ff28693cbffc0000(0000) knlGS:0000000000000000 [1026677.353000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1026677.359195] CR2: 0000000000000010 CR3: 0000000128df4001 CR4: 0000000000771ef0 [1026677.366779] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1026677.374369] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1026677.381952] PKRU: 55555554 [1026677.385116] Call Trace: [1026677.388023] <TASK> [1026677.390589] ? __die+0x20/0x70 [1026677.394105] ? page_fault_oops+0x82/0x160 [1026677.398576] ? do_user_addr_fault+0x65/0x6a0 [1026677.403307] ? exc_page_fault+0x6a/0x150 [1026677.407694] ? asm_exc_page_fault+0x22/0x30 [1026677.412349] ? ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.418614] ice_vsi_rebuild+0x34b/0x3c0 [ice] [1026677.423583] ice_vsi_rebuild_by_type+0x76/0x180 [ice] [1026677.429147] ice_rebuild+0x18b/0x520 [ice] [1026677.433746] ? delay_tsc+0x8f/0xc0 [1026677.437630] ice_do_reset+0xa3/0x190 [ice] [1026677.442231] ice_service_task+0x26/0x440 [ice] [1026677.447180] process_one_work+0x174/0x340 [1026677.451669] worker_thread+0x27e/0x390 [1026677.455890] ? __pfx_worker_thread+0x10/0x10 [1026677.460627] kthread+0xee/0x120 [1026677.464235] ? __pfx_kthread+0x10/0x10 [1026677.468445] ret_from_fork+0x2d/0x50 [1026677.472476] ? __pfx_kthread+0x10/0x10 [1026677.476671] ret_from_fork_asm+0x1b/0x30 [1026677.481050] </TASK> Fixes: b3e7b3a6ee92 ("ice: prevent NULL pointer deref during reload") Reported-by: Robert Elliott <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Aleksandr Loktionov <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* Merge branch '100GbE' of ↵David S. Miller2024-03-111-0/+37
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ethtool: ice: Support for RSS settings to GTP Takeru Hayasaka enables RSS functionality for GTP packets on ice driver with ethtool. A user can include TEID and make RSS work for GTP-U over IPv4 by doing the following:`ethtool -N ens3 rx-flow-hash gtpu4 sde` In addition to gtpu(4|6), we now support gtpc(4|6),gtpc(4|6)t,gtpu(4|6)e, gtpu(4|6)u, and gtpu(4|6)d. gtpc(4|6): Used for GTP-C in IPv4 and IPv6, where the GTP header format does not include a TEID. gtpc(4|6)t: Used for GTP-C in IPv4 and IPv6, with a GTP header format that includes a TEID. gtpu(4|6): Used for GTP-U in both IPv4 and IPv6 scenarios. gtpu(4|6)e: Used for GTP-U with extended headers in both IPv4 and IPv6. gtpu(4|6)u: Used when the PSC (PDU session container) in the GTP-U extended header includes Uplink, applicable to both IPv4 and IPv6. gtpu(4|6)d: Used when the PSC in the GTP-U extended header includes Downlink, for both IPv4 and IPv6. ==================== Signed-off-by: David S. Miller <[email protected]>
| * ice: Implement RSS settings for GTP using ethtoolTakeru Hayasaka2024-03-061-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following the addition of new GTP RSS hash options to ethtool.h, this patch implements the corresponding RSS settings for GTP packets in the Intel ice driver. It enables users to configure RSS for GTP-U and GTP-C traffic over IPv4 and IPv6, utilizing the newly defined hash options. The implementation covers the handling of gtpu(4|6), gtpc(4|6), gtpc(4|6)t, gtpu(4|6)e, gtpu(4|6)u, and gtpu(4|6)d traffic, providing enhanced load distribution for GTP traffic across multiple processing units. Signed-off-by: Takeru Hayasaka <[email protected]> Reviewed-by: Marcin Szycik <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2024-03-071-1/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/page_pool_user.c 0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors") 429679dcf7d9 ("page_pool: fix netlink dump stop/resume") Signed-off-by: Jakub Kicinski <[email protected]>
| * ice: fix typo in assignmentJesse Brandeburg2024-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | Fix an obviously incorrect assignment, created with a typo or cut-n-paste error. Fixes: 5995ef88e3a8 ("ice: realloc VSI stats arrays") Signed-off-by: Jesse Brandeburg <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Paul Menzel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
* | ice: do not disable Tx queues twice in ice_down()Maciej Fijalkowski2024-03-041-55/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | ice_down() clears QINT_TQCTL_CAUSE_ENA_M bit twice, which is not necessary. First clearing happens in ice_vsi_dis_irq() and second in ice_vsi_stop_tx_ring() - remove the first one. While at it, make ice_vsi_dis_irq() static as ice_down() is the only current caller of it. Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2024-02-291-17/+69
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR. Conflicts: net/mptcp/protocol.c adf1bb78dab5 ("mptcp: fix snd_wnd initialization for passive socket") 9426ce476a70 ("mptcp: annotate lockless access for RX path fields") https://lore.kernel.org/all/[email protected]/ Adjacent changes: drivers/dpll/dpll_core.c 0d60d8df6f49 ("dpll: rely on rcu for netdev_dpll_pin()") e7f8df0e81bf ("dpll: move xa_erase() call in to match dpll_pin_alloc() error path order") drivers/net/veth.c 1ce7d306ea63 ("veth: try harder when allocating queue memory") 0bef512012b1 ("net: add netdev_lockdep_set_classes() to virtual drivers") drivers/net/wireless/intel/iwlwifi/mvm/d3.c 8c9bef26e98b ("wifi: iwlwifi: mvm: d3: implement suspend with MLO") 78f65fbf421a ("wifi: iwlwifi: mvm: ensure offloading TID queue exists") net/wireless/nl80211.c f78c1375339a ("wifi: nl80211: reject iftype change with mesh ID change") 414532d8aa89 ("wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriately") Signed-off-by: Jakub Kicinski <[email protected]>
| * ice: Fix ASSERT_RTNL() warning during certain scenariosAmritha Nambiar2024-02-201-17/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 91fdbce7e8d6 ("ice: Add support in the driver for associating queue with napi") invoked the netif_queue_set_napi() call. This kernel function requires to be called with rtnl_lock taken, otherwise ASSERT_RTNL() warning will be triggered. ice_vsi_rebuild() initiating this call is under rtnl_lock when the rebuild is in response to configuration changes from external interfaces (such as tc, ethtool etc. which holds the lock). But, the VSI rebuild generated from service tasks and resets (PFR/CORER/GLOBR) is not under rtnl lock protection. Handle these cases as well to hold lock before the kernel call (by setting the 'locked' boolean to false). netif_queue_set_napi() is also used to clear previously set napi in the q_vector unroll flow. Handle this for locked/lockless execution paths. Fixes: 91fdbce7e8d6 ("ice: Add support in the driver for associating queue with napi") Signed-off-by: Amritha Nambiar <[email protected]> Reviewed-by: Sridhar Samudrala <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* | ice: make ice_vsi_cfg_txq() staticMaciej Fijalkowski2024-02-021-73/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, XSK control path in ice driver calls directly ice_vsi_cfg_txq() whereas we have ice_vsi_cfg_single_txq() for that purpose. Use the latter from XSK side and make ice_vsi_cfg_txq() static. ice_vsi_cfg_txq() resides in ice_base.c and is rather big, so to reduce the code churn let us move the callers of it from ice_lib.c to ice_base.c. This change puts ice_qp_ena() on nice diet due to the checks and operations that ice_vsi_cfg_single_{r,t}xq() do internally. add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-182 (-182) Function old new delta ice_xsk_pool_setup 2165 1983 -182 Total: Before=472597, After=472415, chg -0.04% Signed-off-by: Maciej Fijalkowski <[email protected]> Acked-by: Magnus Karlsson <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Chandan Kumar Rout <[email protected]> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* | ice: make ice_vsi_cfg_rxq() staticMaciej Fijalkowski2024-02-021-56/+0
|/ | | | | | | | | | | | | | | | Currently, XSK control path in ice driver calls directly ice_vsi_cfg_rxq() whereas we have ice_vsi_cfg_single_rxq() for that purpose. Use the latter from XSK side and make ice_vsi_cfg_rxq() static. ice_vsi_cfg_rxq() resides in ice_base.c and is rather big, so to reduce the code churn let us move two callers of it from ice_lib.c to ice_base.c. Signed-off-by: Maciej Fijalkowski <[email protected]> Acked-by: Magnus Karlsson <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Chandan Kumar Rout <[email protected]> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* Merge branch '1GbE' of ↵David S. Miller2023-12-221-34/+20
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== intel: use bitfield operations Jesse Brandeburg says: After repeatedly getting review comments on new patches, and sporadic patches to fix parts of our drivers, we should just convert the Intel code to use FIELD_PREP() and FIELD_GET(). It's then "common" in the code and hopefully future change-sets will see the context and do-the-right-thing. This conversion was done with a coccinelle script which is mentioned in the commit messages. Generally there were only a couple conversions that were "undone" after the automatic changes because they tried to convert a non-contiguous mask. Patch 1 is required at the beginning of this series to fix a "forever" issue in the e1000e driver that fails the compilation test after conversion because the shift / mask was out of range. The second patch just adds all the new #includes in one go. The patch titled: "ice: fix pre-shifted bit usage" is needed to allow the use of the FIELD_* macros and fix up the unexpected "shifts included" defines found while creating this series. The rest are the conversion to use FIELD_PREP()/FIELD_GET(), and the occasional leXX_{get,set,encode}_bits() call, as suggested by Alex. ==================== Signed-off-by: David S. Miller <[email protected]>
| * ice: cleanup inconsistent codeJesse Brandeburg2023-12-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was found while doing further testing of the previous commit fbf32a9bab91 ("ice: field get conversion") that one of the FIELD_GET conversions should really be a FIELD_PREP. The previous code was styled as a match to the FIELD_GET conversion, which always worked because the shift value was 0. The code makes way more sense as a FIELD_PREP and was in fact the only FIELD_GET with two constant arguments in this series. Didn't squash this patch to make it easier to call out the (non-impactful) bug. Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
| * ice: field get conversionJesse Brandeburg2023-12-181-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refactor the ice driver to use FIELD_GET() for mask and shift reads, which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. @get@ constant shift,mask; type T; expression a; @@ -(((T)(a) & mask) >> shift) +FIELD_GET(mask, a) and applied via: spatch --sp-file field_prep.cocci --in-place --dir \ drivers/net/ethernet/intel/ CC: Alexander Lobakin <[email protected]> Cc: Julia Lawall <[email protected]> Reviewed-by: Marcin Szycik <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
| * ice: fix pre-shifted bit usageJesse Brandeburg2023-12-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While converting to FIELD_PREP() and FIELD_GET(), it was noticed that some of the RSS defines had *included* the shift in their definitions. This is completely outside of normal, such that a developer could easily make a mistake and shift at the usage site (like when using FIELD_PREP()). Rename the defines and set them to the "pre-shifted values" so they match the template the driver normally uses for masks and the member bits of the mask, which also allows the driver to use FIELD_PREP correctly with these values. Use GENMASK() for this changed MASK value. Do the same for the VLAN EMODE defines as well. Reviewed-by: Marcin Szycik <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
| * ice: field prep conversionJesse Brandeburg2023-12-181-30/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refactor ice driver to use FIELD_PREP(), which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. Several places I changed to OR into a single variable with |= instead of using a multi-line statement with trailing OR operators, as it (subjectively) makes the code clearer. A local variable vmvf_and_timeout was created and used to avoid multiple logical ORs being __le16 converted, which shortened some lines and makes the code cleaner. Also clean up a couple of places where conversions were made to have the code read more clearly/consistently. @prep2@ constant shift,mask; type T; expression a; @@ -(((T)(a) << shift) & mask) +FIELD_PREP(mask, a) @prep@ constant shift,mask; type T; expression a; @@ -((T)((a) << shift) & mask) +FIELD_PREP(mask, a) Cc: Julia Lawall <[email protected]> CC: Alexander Lobakin <[email protected]> Reviewed-by: Marcin Szycik <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni2023-12-211-4/+3
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR. Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c 23c93c3b6275 ("bnxt_en: do not map packet buffers twice") 6d1add95536b ("bnxt_en: Modify TX ring indexing logic.") tools/testing/selftests/net/Makefile 2258b666482d ("selftests: add vlan hw filter tests") a0bc96c0cd6e ("selftests: net: verify fq per-band packet limit") Signed-off-by: Paolo Abeni <[email protected]>
| * ice: Fix PF with enabled XDP going no-carrier after resetLarysa Zaremba2023-12-181-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6624e780a577fc596788 ("ice: split ice_vsi_setup into smaller functions") has refactored a bunch of code involved in PFR. In this process, TC queue number adjustment for XDP was lost. Bring it back. Lack of such adjustment causes interface to go into no-carrier after a reset, if XDP program is attached, with the following message: ice 0000:b1:00.0: Failed to set LAN Tx queue context, error: -22 ice 0000:b1:00.0 ens801f0np0: Failed to open VSI 0x0006 on switch 0x0001 ice 0000:b1:00.0: enable VSI failed, err -22, VSI index 0, type ICE_VSI_PF ice 0000:b1:00.0: PF VSI rebuild failed: -22 ice 0000:b1:00.0: Rebuild failed, unload and reload driver Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Reviewed-by: Przemek Kitszel <[email protected]> Signed-off-by: Larysa Zaremba <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Chandan Kumar Rout <[email protected]> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
| * ice: stop trashing VF VSI aggregator node ID informationJacob Keller2023-12-181-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When creating new VSIs, they are assigned into an aggregator node in the scheduler tree. Information about which aggregator node a VSI is assigned into is maintained by the vsi->agg_node structure. In ice_vsi_decfg(), this information is being destroyed, by overwriting the valid flag and the agg_id field to zero. For VF VSIs, this breaks the aggregator node configuration replay, which depends on this information. This results in VFs being inserted into the default aggregator node. The resulting configuration will have unexpected Tx bandwidth sharing behavior. This was broken by commit 6624e780a577 ("ice: split ice_vsi_setup into smaller functions"), which added the block to reset the agg_node data. The vsi->agg_node structure is not managed by the scheduler code, but is instead a wrapper around an aggregator node ID that is tracked at the VSI layer. Its been around for a long time, and its primary purpose was for handling VFs. The SR-IOV VF reset flow does not make use of the standard VSI rebuild/replay logic, and uses vsi->agg_node as part of its handling to rebuild the aggregator node configuration. The logic for aggregator nodes stretches back to early ice driver code from commit b126bd6bcd67 ("ice: create scheduler aggregator node config and move VSIs") The logic in ice_vsi_decfg() which trashes the ice_agg_node data is clearly wrong. It destroys information that is necessary for handling VF reset,. It is also not the correct way to actually remove a VSI from an aggregator node. For that, we need to implement logic in the scheduler code. Further, non-VF VSIs properly replay their aggregator configuration using existing scheduler replay logic. To fix the VF replay logic, remove this broken aggregator node cleanup logic. This is the simplest way to immediately fix this. This ensures that VFs will have proper aggregate configuration after a reset. This is especially important since VFs often perform resets as part of their reconfiguration flows. Without fixing this, VFs will be placed in the default aggregator node and Tx bandwidth will not be shared in the expected and configured manner. Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Signed-off-by: Jacob Keller <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
* | ice: enable symmetric-xor RSS for Toeplitz hash functionJeff Guo2023-12-141-19/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow the user to set the symmetric Toeplitz hash function via: # ethtool -X eth0 hfunc toeplitz symmetric-xor All existing RSS configurations will be converted to symmetric unless they have a non-symmetric field (other than IP src/dst and L4 src/dst ports) used for hashing. The driver will reject a new RSS configuration if such a field is requested. The hash function in the E800 NICs is set per-VSI and a specific AQ command is needed to modify the hash function. Use the AQ command to enable setting the symmetric Toeplitz RSS hash function for any VSI in the new ice_set_rss_hfunc(). When the Symmetric Toeplitz hash function is used, the hardware sets the input set of the RSS (Toeplitz) algorithm to be the XOR of the fields index by HSYMM and the fields index by the INSET registers. We use this to create a symmetric hash by setting the HSYMM registers to point to their counterparts in the INSET registers: HSYMM [src_fv] = dst_fv; HSYMM [dst_fv] = src_fv; where src_fv and dst_fv are the indexes of the protocol's src and dst fields. Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Jeff Guo <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Co-developed-by: Ahmed Zaki <[email protected]> Signed-off-by: Ahmed Zaki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
* | ice: refactor RSS configurationQi Zhang2023-12-141-60/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refactor the driver to use a communication data structure for RSS config. To do so we introduce the new ice_rss_hash_cfg struct, and then pass it as an argument to several functions. Also introduce enum ice_rss_cfg_hdr_type to specify a more granular and flexible RSS configuration: ICE_RSS_OUTER_HEADERS - take outer layer as RSS input set ICE_RSS_INNER_HEADERS - take inner layer as RSS input set ICE_RSS_INNER_HEADERS_W_OUTER_IPV4 - take inner layer as RSS input set for packet with outer IPV4 ICE_RSS_INNER_HEADERS_W_OUTER_IPV6 - take inner layer as RSS input set for packet with outer IPV6 ICE_RSS_ANY_HEADERS - try with outer first then inner (same as the behaviour without this change) Finally, move the virtchnl_rss_algorithm enum to be with the other RSS related structures in the virtchnl.h file. There should be no functional change due to this patch. Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Qi Zhang <[email protected]> Co-developed-by: Jesse Brandeburg <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Co-developed-by: Ahmed Zaki <[email protected]> Signed-off-by: Ahmed Zaki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
* | ice: fix ICE_AQ_VSI_Q_OPT_RSS_* register valuesAhmed Zaki2023-12-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the values of the ICE_AQ_VSI_Q_OPT_RSS_* registers. Shifting is already done when the values are used, no need to double shift. Bug was not discovered earlier since only ICE_AQ_VSI_Q_OPT_RSS_TPLZ (Zero) is currently used. Also, rename ICE_AQ_VSI_Q_OPT_RSS_XXX to ICE_AQ_VSI_Q_OPT_RSS_HASH_XXX for consistency. Co-developed-by: Jesse Brandeburg <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Ahmed Zaki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
* | net: Add NAPI IRQ supportAmritha Nambiar2023-12-051-0/+2
| | | | | | | | | | | | | | | | | | | | Add support to associate the interrupt vector number for a NAPI instance. Signed-off-by: Amritha Nambiar <[email protected]> Reviewed-by: Sridhar Samudrala <[email protected]> Link: https://lore.kernel.org/r/170147334728.5260.13221803396905901904.stgit@anambiarhost.jf.intel.com Signed-off-by: Jakub Kicinski <[email protected]>
* | ice: Add support in the driver for associating queue with napiAmritha Nambiar2023-12-051-0/+67
| | | | | | | | | | | | | | | | | | | | After the napi context is initialized, map the napi instance with the queue/queue-set on the corresponding irq line. Signed-off-by: Amritha Nambiar <[email protected]> Reviewed-by: Sridhar Samudrala <[email protected]> Link: https://lore.kernel.org/r/170147332060.5260.13310934657151560599.stgit@anambiarhost.jf.intel.com Signed-off-by: Jakub Kicinski <[email protected]>
* | ice: realloc VSI stats arraysMichal Swiatkowski2023-11-131-19/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously only case when queues amount is lower was covered. Implement realloc for case when queues amount is higher than previous one. Use krealloc() function and zero new allocated elements. It has to be done before ice_vsi_def_cfg(), because stats element for ring is set there. Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Michal Swiatkowski <[email protected]> Tested-by: Sujai Buvaneswaran <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
* | ice: allow changing SWITCHDEV_CTRL VSI queuesMichal Swiatkowski2023-11-131-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement mechanism to change number of queues for SWITCHDEV_CTRL VSI type. Value from ::req_txq/rxq will be written to ::alloc_txq/rxq after calling ice_vsi_rebuild(). Reviewed-by: Piotr Raczynski <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Michal Swiatkowski <[email protected]> Tested-by: Sujai Buvaneswaran <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
* | ice: make representor code genericMichal Swiatkowski2023-11-131-6/+4
|/ | | | | | | | | | | | | | | | Representor code needs to be independent from specific device type, like in this case VF. Make generic add / remove representor function and specific add VF / rem VF function. New device types will follow this scheme. In bridge offload code there is a need to get representor pointer based on VSI. Implement helper function to achieve that. Reviewed-by: Piotr Raczynski <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Michal Swiatkowski <[email protected]> Tested-by: Sujai Buvaneswaran <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
* ice: implement num_msix field per VFMichal Swiatkowski2023-10-201-1/+1
| | | | | | | | | | | | | | | Store the amount of MSI-X per VF instead of storing it in pf struct. It is used to calculate number of q_vectors (and queues) for VF VSI. This is necessary because with follow up changes the number of MSI-X can be different between VFs. Use it instead of using pf->vf_msix value in all cases. Signed-off-by: Michal Swiatkowski <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2023-10-191-2/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR. net/mac80211/key.c 02e0e426a2fb ("wifi: mac80211: fix error path key leak") 2a8b665e6bcc ("wifi: mac80211: remove key_mtx") 7d6904bf26b9 ("Merge wireless into wireless-next") https://lore.kernel.org/all/[email protected]/ Adjacent changes: drivers/net/ethernet/ti/Kconfig a602ee3176a8 ("net: ethernet: ti: Fix mixed module-builtin object") 98bdeae9502b ("net: cpmac: remove driver to prepare for platform removal") Signed-off-by: Jakub Kicinski <[email protected]>
| * ice: fix over-shifted variableJesse Brandeburg2023-10-131-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the introduction of the ice driver the code has been double-shifting the RSS enabling field, because the define already has shifts in it and can't have the regular pattern of "a << shiftval & mask" applied. Most places in the code got it right, but one line was still wrong. Fix this one location for easy backports to stable. An in-progress patch fixes the defines to "standard" and will be applied as part of the regular -next process sometime after this one. Fixes: d76a60ba7afb ("ice: Add support for VLANs and offloads") Reviewed-by: Przemek Kitszel <[email protected]> CC: [email protected] Signed-off-by: Jesse Brandeburg <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2023-10-131-0/+6
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: kernel/bpf/verifier.c 829955981c55 ("bpf: Fix verifier log for async callback return values") a923819fb2c5 ("bpf: Treat first argument as return value for bpf_throw") Signed-off-by: Jakub Kicinski <[email protected]>
| * ice: block default rule setting on LAG interfaceMichal Swiatkowski2023-10-081-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When one of the LAG interfaces is in switchdev mode, setting default rule can't be done. The interface on which switchdev is running has ice_set_rx_mode() blocked to avoid default rule adding (and other rules). The other interfaces (without switchdev running but connected via bond with interface that runs switchdev) can't follow the same scheme, because rx filtering needs to be disabled when failover happens. Notification for bridge to set promisc mode seems like good place to do that. Fixes: bb52f42acef6 ("ice: Add driver support for firmware changes for LAG") Signed-off-by: Michal Swiatkowski <[email protected]> Signed-off-by: Marcin Szycik <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Sujai Buvaneswaran <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
* | ice: fix linking when CONFIG_PTP_1588_CLOCK=nJacob Keller2023-10-041-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent support for DPLL introduced by commit 8a3a565ff210 ("ice: add admin commands to access cgu configuration") and commit d7999f5ea64b ("ice: implement dpll interface to control cgu") broke linking the ice driver if CONFIG_PTP_1588_CLOCK=n: ld: vmlinux.o: in function `ice_init_feature_support': (.text+0x8702b8): undefined reference to `ice_is_phy_rclk_present' ld: (.text+0x8702cd): undefined reference to `ice_is_cgu_present' ld: (.text+0x8702d9): undefined reference to `ice_is_clock_mux_present_e810t' ld: vmlinux.o: in function `ice_dpll_init_info_direct_pins': ice_dpll.c:(.text+0x894167): undefined reference to `ice_cgu_get_pin_freq_supp' ld: ice_dpll.c:(.text+0x894197): undefined reference to `ice_cgu_get_pin_name' ld: ice_dpll.c:(.text+0x8941a8): undefined reference to `ice_cgu_get_pin_type' ld: vmlinux.o: in function `ice_dpll_update_state': ice_dpll.c:(.text+0x894494): undefined reference to `ice_get_cgu_state' ld: vmlinux.o: in function `ice_dpll_init': (.text+0x8953d5): undefined reference to `ice_get_cgu_rclk_pin_info' The first commit broke things by calling functions in ice_init_feature_support that are compiled as part of ice_ptp_hw.o, including: * ice_is_phy_rclk_present * ice_is_clock_mux_present_e810t * ice_is_cgU_present The second commit continued the break by calling several CGU functions defined in ice_ptp_hw.c in the DPLL code. Because the ice_dpll.c file is compiled unconditionally, it will not link when CONFIG_PTP_1588_CLOCK=n. It might be possible to break this dependency and expose those functions without CONFIG_PTP_1588_CLOCK, but that is not clear to me. For the DPLL case, simply compile ice_dpll.o only when we have CONFIG_PTP_1588_CLOCK. Add stub no-op implementation of ice_dpll_init() and ice_dpll_uninit() when CONFIG_PTP_1588_CLOCK=n into ice_dpll.h The other functions are part of checking the netlist to see if hardware features are enabled. These checks don't really belong in ice_ptp_hw.c, and make more sense as part of the ice_common.c file. We already have ice_is_gps_in_netlist() in ice_common.c which is doing a similar check. Move the functions into ice_common.c and rename them to have the similar postfix of "in_netlist()" to be more expressive of what they are actually checking. This also makes the ice_find_netlist_node only called from within ice_common.c, so its safe to mark it static and stop declaring it in the ice_common.h header as well. Fixes: 8a3a565ff210 ("ice: add admin commands to access cgu configuration") Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected] Signed-off-by: Jacob Keller <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Simon Horman <[email protected]> # build-tested Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
* | ice: make use of DEFINE_FLEX() for struct ice_aqc_add_tx_qgrpPrzemek Kitszel2023-10-031-18/+5
| | | | | | | | | | | | | | | | | | Use DEFINE_FLEX() macro for 1-elem flex array use case of struct ice_aqc_add_tx_qgrp. Signed-off-by: Przemek Kitszel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
* | ice: introduce ice_pf_src_tmr_ownedJacob Keller2023-09-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | Add ice_pf_src_tmr_owned() macro to check the function capability bit indicating if the current function owns the PTP hardware clock. This is slightly shorter than the more verbose access via hw.func_caps.ts_func_info.src_tmr_owned. Use this where possible rather than open coding its equivalent. Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
* | ice: remove ICE_F_PTP_EXTTS feature flagJacob Keller2023-09-181-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ICE_F_PTP_EXTTS feature flag is ostensibly intended to support checking whether the device supports external timestamp pins. It is only checked in E810-specific code flows, and is enabled for all E810-based devices. E822 and E823 flows unconditionally enable external timestamp support. This makes the feature flag meaningless, as it is always enabled. Just unconditionally enable support for external timestamp pins and remove this unnecessary flag. Signed-off-by: Jacob Keller <[email protected]> Tested-by: Sunitha Mekala <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* | ice: add admin commands to access cgu configurationArkadiusz Kubalewski2023-09-171-4/+13
|/ | | | | | | | | | | | | Add firmware admin command to access clock generation unit configuration, it is required to enable Extended PTP and SyncE features in the driver. Add definitions of possible hardware variations of input and output pins related to clock generation unit and functions to access the data. Signed-off-by: Arkadiusz Kubalewski <[email protected]> Signed-off-by: Vadim Fedorenko <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
* ice: refactor ice_vsi_is_vlan_pruning_enaJan Sokolowski2023-08-171-4/+1
| | | | | | | | | | | | As this method became static, and is already called with check for vsi being non-null, an unnecessary check along with superfluous parentheses is removed. Signed-off-by: Jan Sokolowski <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
* ice: refactor ice_lib to make functions staticJan Sokolowski2023-08-171-35/+35
| | | | | | | | | | | | | As following methods are not used outside of ice_lib, they can be made static: ice_vsi_is_vlan_pruning_ena ice_vsi_cfg_frame_size Signed-off-by: Jan Sokolowski <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
* ice: remove unused methodsJan Sokolowski2023-08-171-15/+0
| | | | | | | | | | | | | | | Following methods were found to no longer be in use: ice_is_pca9575_present ice_mac_fltr_exist ice_napi_del Remove them. Signed-off-by: Jan Sokolowski <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
* ice: clean up __ice_aq_get_set_rss_lut()Przemek Kitszel2023-08-071-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refactor __ice_aq_get_set_rss_lut() to improve reader experience and limit misuse scenarios (undesired LUT size for given LUT type). Allow only 3 RSS LUT type+size variants: PF LUT sized 2048, GLOBAL LUT sized 512, and VSI LUT sized 64, which were used on default flows prior to this commit. Prior to the change, code was mixing the meaning of @params->lut_size and @params->lut_type, flag assigning logic was cryptic, while long defines made everything harder to follow. Fix that by extracting some code out to separate helpers. Drop some of "shift by 0" statements that originated from Intel's internal HW documentation. Drop some redundant VSI masks (since ice_is_vsi_valid() gives "valid" for up to 0x300 VSIs). After sweeping all the defines out of struct ice_aqc_get_set_rss_lut, it fits into 7 lines. Finally apply some cleanup to the callsite (use of the new enums, tmp var for lengthy bit extraction). Note that flags for 128 and 64 sized VSI LUT are the same, and 64 is used everywhere in the code (updated to new enum here), it just happened that there was 128 in flag name. __ice_aq_get_set_rss_key() uses the same VSI valid bit, make constant common for it and __ice_aq_get_set_rss_lut(). Signed-off-by: Przemek Kitszel <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Arpana Arland <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
* ice: Add driver support for firmware changes for LAGDave Ertman2023-07-271-1/+1
| | | | | | | | | | | | | | Add the defines, fields, and detection code for FW support of LAG for SRIOV. Also exposes some previously static functions to allow access in the lag code. Clean up code that is unused or not needed for LAG support. Also add an ordered workqueue for processing LAG events. Reviewed-by: Daniel Machon <[email protected]> Signed-off-by: Dave Ertman <[email protected]> Tested-by: Sujai Buvaneswaran <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
generated by cgit (git 2.51.2) at 2025-12-03 07:21:39 +0000