aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/nxp/imx
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: imx6-gw: Replace license text comment with SPDX identifierBence Csókás2025-07-1115-645/+15
| | | | | | | | | | | | | | | | | Replace verbatim license text with a `SPDX-License-Identifier`. The comment header mis-attributes this license to be "X11", but the license text does not include the last line "Except as contained in this notice, the name of the X Consortium shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from the X Consortium.". Therefore, this license is actually equivalent to the SPDX "MIT" license (confirmed by text diffing). Cc: Tim Harvey <[email protected]> Signed-off-by: Bence Csókás <[email protected]> Acked-by: Tim Harvey <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
* ARM: dts: imx6ul-kontron-sl-common: Fix QSPI NAND node nameFrieder Schrempf2025-07-111-1/+1
| | | | | | | | | | | Rename QSPI NAND node to 'flash@0' in order to fix the following dt-schema warning: spi-flash@0 (spi-nand): $nodename:0: 'spi-flash@0' does not match '^(flash|.*sram|nand)(@.*)?$' Signed-off-by: Frieder Schrempf <[email protected]> Reviewed-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
* ARM: dts: imx6ul-kontron-sl-common: Add SPI NOR partitionsEberhard Stoll2025-07-111-1/+22
| | | | | | | | | | Describe the partitions for the bootloader and the environment on the SPI NOR. While at it also fix the order of the properties in the flash node itself. Signed-off-by: Eberhard Stoll <[email protected]> Signed-off-by: Frieder Schrempf <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
* ARM: dts: imx6ul-kontron-bl-common: Fix RTS polarity for RS485 interfaceAnnette Kobou2025-07-111-1/+0
| | | | | | | | | | | The polarity of the DE signal of the transceiver is active-high for sending. Therefore rs485-rts-active-low is wrong and needs to be removed to make RS485 transmissions work. Signed-off-by: Annette Kobou <[email protected]> Signed-off-by: Frieder Schrempf <[email protected]> Fixes: 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards") Signed-off-by: Shawn Guo <[email protected]>
* ARM: dts: imx6-karo: Replace license text comment with SPDX identifierBence Csókás2025-07-0735-1301/+35
| | | | | | | | | | | | | | | | | Replace verbatim license text with a `SPDX-License-Identifier` The comment header mis-attributes this license to be "X11", but the license text does not include the last line "Except as contained in this notice, the name of the X Consortium shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from the X Consortium.". Therefore, this license is actually equivalent to the SPDX "MIT" license (confirmed by text diffing). Cc: Lothar Waßmann <[email protected]> Acked-By: Lothar Waßmann <[email protected]> Signed-off-by: Bence Csókás <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
* ARM: dts: imx6ul: support Engicam MicroGEA GTW boardDario Binacchi2025-07-022-0/+163
| | | | | | | | | | | | | | | | Support Engicam MicroGEA GTW board with: - 256 Mbytes NAND Flash - 512 Mbytes DRAM DDR2 - Buttons - LEDs - Micro SD card connector - USB 2.0 high-speed/full-speed - Ethernet MAC Signed-off-by: Dario Binacchi <[email protected]> Reviewed-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
* ARM: dts: imx6ul: support Engicam MicroGEA RMM boardDario Binacchi2025-07-022-0/+361
| | | | | | | | | | | | | | | | | Support Engicam MicroGEA RMM board with: - 256 Mbytes NAND Flash - 512 Mbytes DRAM DDR2 - CAN - LEDs - Micro SD card connector - USB 2.0 high-speed/full-speed - Ethernet MAC Signed-off-by: Dario Binacchi <[email protected]> Reviewed-by: Peng Fan <[email protected]> Reviewed-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
* ARM: dts: imx6ul: support Engicam MicroGEA BMM boardDario Binacchi2025-07-022-0/+304
| | | | | | | | | | | | | | | | Support Engicam MicroGEA BMM board with: - 256 Mbytes NAND Flash - 512 Mbytes DRAM DDR2 - CAN - Micro SD card connector - USB 2.0 high-speed/full-speed - Ethernet MAC Signed-off-by: Dario Binacchi <[email protected]> Reviewed-by: Peng Fan <[email protected]> Reviewed-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
* ARM: dts: imx6ul: support Engicam MicroGEA-MX6UL SoMDario Binacchi2025-07-021-0/+95
| | | | | | | | | | | | Support Engicam MicroGEA-MX6UL SoM with: - 256 Mbytes NAND Flash - 512 Mbytes DRAM DDR2 - Ethernet MAC Signed-off-by: Dario Binacchi <[email protected]> Reviewed-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
* ARM: dts: add ngpios for vf610 compatible gpio controllersHaibo Chen2025-06-191-0/+4
| | | | | | | | | | | | | | | | After commit da5dd31efd24 ("gpio: vf610: Switch to gpio-mmio"), the vf610 GPIO driver no longer uses the static number 32 for gc->ngpio. This allows users to configure the number of GPIOs per port. And some gpio controllers did have less pads. So add 'ngpios' here, this can save some memory when request bitmap, and also show user more accurate information when use gpio tools. Reviewed-by: Frank Li <[email protected]> Signed-off-by: Haibo Chen <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
* ARM: dts: imx7s-warp: Improve the Wifi descriptionFabio Estevam2025-06-131-13/+16
| | | | | | | | | | | GPIO5_10 is connected to the BCM43455 WL_REG_ON pin and it is better descrbed via mmc-pwrseq-simple.yaml. Also improve the Wifi devicetree description by passing a compatible string that describes the BCM43455 presence as per brcm,bcm4329-fmac.yaml. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
* ARM: dts: imx7s-warp: Improve the Bluetooth descriptionFabio Estevam2025-06-131-12/+8
| | | | | | | | | | GPIO5_17 is connected to the BCM43455 BT_REG_ON pin. Improve the Bluetooth devicetree description by using a more accurate description of the hardware as per brcm,bluetooth.yaml. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
* Merge tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2025-05-3114-26/+16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SoC devicetree updates from Arnd Bergmann: "There are 11 newly supported SoCs, but these are all either new variants of existing designs, or straight reuses of the existing chip in a new package: - RK3562 is a new chip based on the old Cortex-A53 core, apparently a low-cost version of the Cortex-A55 based RK3568/RK3566. - NXP i.MX94 is a minor variation of i.MX93/i.MX95 with a different set of on-chip peripherals. - Renesas RZ/V2N (R9A09G056) is a new member of the larger RZ/V2 family - Amlogic S6/S7/S7D - Samsung Exynos7870 is an older chip similar to Exynos7885 - WonderMedia wm8950 is a minor variation on the wm8850 chip - Amlogic s805y is almost idential to s805x - Allwinner A523 is similar to A527 and T527 - Qualcomm MSM8926 is a variant of MSM8226 - Qualcomm Snapdragon X1P42100 is related to R1E80100 There are also 65 boards, including reference designs for the chips above, this includes - 12 new boards based on TI K3 series chips, most of them from Toradex - 10 devices using Rockchips RK35xx and PX30 chips - 2 phones and 2 laptops based on Qualcomm Snapdragon designs - 10 NXP i.MX8/i.MX9 boards, mostly for embedded/industrial uses - 3 Samsung Galaxy phones based on Exynos7870 - 5 Allwinner based boards using a variety of ARMv8 chips - 9 32-bit machines, each based on a different SoC family Aside from the new hardware, there is the usual set of cleanups and newly added hardware support on existing machines, for a total of 965 devicetree changesets" * tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (956 commits) MAINTAINERS, mailmap: update Sven Peter's email address arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequency arm64: dts: nuvoton: Add pinctrl ARM: dts: samsung: sp5v210-aries: Align wifi node name with bindings arm64: dts: blaize-blzp1600: Enable GPIO support dt-bindings: clock: socfpga: convert to yaml arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node arm64: dts: rockchip: fix rk3562 pcie unit addresses arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node arm64: dts: rockchip: fix rk3576 pcie unit addresses arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588 arm64: dts: rockchip: Add missing SFC power-domains to rk3576 Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0" arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes arm64: dts: mt6359: Rename RTC node to match binding expectations arm64: dts: mt8365-evk: Add goodix touchscreen support arm64: dts: mediatek: mt8188: Add missing #reset-cells property arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board ...
| * ARM: dts: imx7d: update opp-table voltagesEfe Can İçöz2025-05-091-3/+3
| | | | | | | | | | | | | | Update accepted voltage levels according to IMX7DCEC Table 9 Operating ranges Signed-off-by: Efe Can İçöz <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: nxp: Align wifi node name with bindingsKrzysztof Kozlowski2025-05-092-2/+2
| | | | | | | | | | | | | | | | | | | | | | Since commit 3c3606793f7e ("dt-bindings: wireless: bcm4329-fmac: Use wireless-controller.yaml schema"), bindings expect 'wifi' as node name: imx7d-remarkable2.dtb: bcrmf@1: $nodename:0: 'bcrmf@1' does not match '^wifi(@.*)?$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Daniel Baluta <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx6q-apalis: remove pcie-switch nodeFrancesco Dolcini2025-04-251-9/+0
| | | | | | | | | | | | | | | | The compatible "plx,pex8605" does not exist, there is no DT binding for it and there was never a driver matching this compatible, remove it. Signed-off-by: Francesco Dolcini <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx: Drop redundant CPU "clock-latency"Rob Herring (Arm)2025-04-231-1/+0
| | | | | | | | | | | | | | | | | | | | The "clock-latency" property is part of the deprecated opp-v1 binding and is redundant if the opp-v2 table has equal or larger values in any "clock-latency-ns". The OPP tables have values of 150000, so it can be removed. Signed-off-by: Rob Herring (Arm) <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx51-digi-connectcore-som: Fix MMA7455 compatibleFabio Estevam2025-04-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | The "fsl,mma7455l" compatible string is not documented anywhere. MMA7455L is the exact same device as the MMA7455, with the exception that it is lead-free. Use the documented compatible string. Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: nxp: Align NAND controller node name with bindingsKrzysztof Kozlowski2025-04-224-4/+4
| | | | | | | | | | | | | | | | | | | | Bindings expect NAND controller device nodes to be named "nand-controller". Cc: Fabio Estevam <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Daniel Baluta <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx: Fix the iim compatible stringFabio Estevam2025-04-223-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Per imx-iim.yaml, the compatible string should only contain a single entry. Change it accordingly to fix the following dt-schema warnings: efuse@83f98000: compatible: ['fsl,imx51-iim', 'fsl,imx27-iim', 'syscon'] is too long Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx31/imx6: Use flash as the NOR node nameFabio Estevam2025-04-223-3/+3
| | | | | | | | | | | | | | | | | | | | | | According to mtd-physmap.yaml, 'nor' is not a valid node name. Change it to 'flash' to fix the following dt-schema warning: nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$' Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
* | ARM: dts: opos6ul: add ksz8081 phy propertiesSébastien Szymanski2025-04-221-0/+3
|/ | | | | | | | | | | | | Commit c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup") removed a PHY fixup that setted the clock mode and the LED mode. Make the Ethernet interface work again by doing as advised in the commit's log, set clock mode and the LED mode in the device tree. Fixes: c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup") Signed-off-by: Sébastien Szymanski <[email protected]> Reviewed-by: Oleksij Rempel <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
* Merge tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2025-03-2735-66/+908
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SoC devicetree updates from Arnd Bergmann: "There is new support for additional on-chip devices on Apple, Mediatek, Renesas, Rockchip, Samsung, Google, TI, ST, Nvidia and Amlogic devices. The Arm Morello reference platform gets a devicetree for booting in normal aarch64 mode. The hardware supports experimental CHERI support, which requires a modified kernel. The AMD (formerly Xilinx) Versal NET SoC gets added, this is a combined FPGA with Cortex-A78 CPUs in a SoC. Six new ST STM32MP2 SoC variants are added. Like the earlier STM32MP25, the MP211, MP213, MP215, MP231, MP233 and MP235 models are based on one or two Cortex-A35 cores but each feature a different set of I/O devices. Mediatek MT8370 is a minor variation of MT8390 with fewer CPU and GPU cores Apple T2 is the baseboard management controller on earlier Intel CPU based Macs, with 16 models now gaining initial support. All the above come with dts files for the reference boards. In addition, these boards are added for the SoCs that are already supported: - The Milk-V Jupiter board based on SpacemiT K1/M1 - NetCube Systems Kumquat board based on the 32-bit Allwinner V3s SoC - Three boards based on 32-bit stm32mp1 - 11 distinct board variants from Toradex and one from Variscite, all based on i.MX6 - Google Pixel Pro 6 phone based on gs101 (Tensor) - Three additional variants of the i.MX8MP based "Skov" board - A second variant of the i.MX95 EVK board - Two boards based on Renesas SoCs - Four boards based the Rockchip RK35xx series, plus the RK3588 'MNT Reform 2' laptop" * tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (538 commits) arm64: dts: Add gpio_intc node for Amlogic A5 SoCs arm64: dts: Add gpio_intc node for Amlogic A4 SoCs arm64: dts: hi3660: Add property for fixing CPUIdle arm64: dts: rockchip: remove ethm0_clk0_25m_out from Sige5 gmac0 arm64: dts: marvell: Use preferred node names for "simple-bus" arm64: dts: marvell: Drop unused CP11X_TYPE define arm64: dts: marvell: Move arch timer and pmu nodes to top-level arm64: dts: rockchip: Fix PWM pinctrl names arm64: dts: rockchip: fix RK3576 SCMI clock IDs dt-bindings: clock: rk3576: add SCMI clocks arm64: dts: rockchip: Fix pcie reset gpio on Orange Pi 5 Max arm64: dts: amd/seattle: Drop undocumented "spi-controller" properties arm64: dts: amd/seattle: Fix bus, mmc, and ethernet node names arm64: dts: amd/seattle: Move and simplify fixed clocks arm64: dts: amd/seattle: Base Overdrive B1 on top of B0 version arm64: dts: rockchip: Enable HDMI audio output for ArmSoM Sige7 arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C arm64: dts: rockchip: Add SDHCI controller for RK3528 arm64: dts: rockchip: Remove bluetooth node from rock-3a arm64: dts: rockchip: Move rk356x scmi SHMEM to reserved memory ...
| * ARM: dts: apalis/colibri-imx6: Add support for v1.2Ernest Van Hoecke2025-03-1112-0/+222
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Apalis/Colibri iMX6 V1.2 replaced the STMPE811 ADC/touch controller, which is EOL, with the TLA2024 ADC and AD7879 touch controller. Accurately describe the new hardware. v1.1 of these SoMs is still described by the following DTSI files: imx6qdl-apalis.dtsi imx6qdl-colibri.dtsi v1.2 is now supported by a DTSI that modifies v1.1: imx6qdl-apalis-v1.2.dtsi imx6qdl-colibri-v1.2.dtsi For each carrier board using these modules, a new DTS file was added that includes the v1.1 DTS and modifies it with this v1.2 DTSI. The original DTS can be used for modules up to and including v1.1. Signed-off-by: Ernest Van Hoecke <[email protected]> Reviewed-by: Francesco Dolcini <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: apalis/colibri-imx6: Enable STMPE811 TSErnest Van Hoecke2025-03-112-2/+0
| | | | | | | | | | | | | | | | | | | | Enable the STMPE811 touchscreen in the SOM dtsi files. The STMPE811 is part of the SOM. It's self contained within it, therefore, disabling it is not the correct default behavior. Signed-off-by: Ernest Van Hoecke <[email protected]> Reviewed-by: Francesco Dolcini <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx6ul: Add Variscite Concerto board supportAntonin Godard2025-03-112-0/+321
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Variscite Concerto Carrier Board with: - LVDS interface for the VLCD-CAP-GLD-LVDS 7" LCD 800 x 480 touch display (not configured) - USB Host + USB OTG Connector - 10/100 Mbps Ethernet - miniPCI-Express slot - SD Card connector - Audio Headphone/Line In jack connectors - S-ATA - On-board DMIC Product Page: https://www.variscite.com/product/single-board-computers/concerto-board This file is based on the one provided by Variscite on their own kernel, but adapted for mainline. Signed-off-by: Antonin Godard <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx6ul: Add Variscite VAR-SOM-MX6UL SoM supportAntonin Godard2025-03-111-0/+233
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Variscite VAR_SOM-MX6UL SoM with: - NXP i.MX6 UltraLite SoC - 128–1024 MB DDR3L - 8–128 GB eMMC - 128–512 MB SLC NAND - Camera Interface - LVDS / Parallel RGB interfaces (not configured) - Touch controller (not configured) - Ethernet RMII interface (not configured) - On-SoM Wi-Fi/Bluetooth with CYW43353 on SDIO Module (not configured) - SD/MMC/SDIO interface - USB Host + USB OTG interface - I2C interfaces - SPI interfaces - PCI-Express 2.0 interface - on-SoM Audio Codec (not configured) - S/PDIF interface (not configured) Product website: https://www.variscite.com/product/system-on-module-som/cortex-a7/var-som-6ul-nxp-imx6ul-6ull-6ulz Support is handled with a SoM-centric dtsi exporting the default interfaces along the default pinmuxing to be enabled by the board dts file. I tested this on a VAR-SOM-6UL_G2_700C_512R_8N_IT_REV1.3A, which is why some of the features above are mentioned as "not configured" (I couldn't test them). This file is based on the one provided by Variscite on their own kernel, but adapted for mainline. Signed-off-by: Antonin Godard <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx6qdl-apalis/colibri: Remove compatible from SoM dtsiFrancesco Dolcini2025-03-112-2/+0
| | | | | | | | | | | | | | | | | | The SoM cannot be used standalone, this compatible is invalid and it is always overwritten when this .dtsi file is included, remove it therefore. Signed-off-by: Francesco Dolcini <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx6ul-tqma6ul1: Change include order to disable fec2 nodeMax Merchel2025-03-112-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | TQMa6UL1 has only one FEC which needs to be disabled as one of the last steps. imx6ul-tqma6ul2.dtsi can't be included in imx6ul-tqma6ul1.dtsi as the defaults from imx6ul.dtsi will be applied again. Fixes: 7b8861d8e627 ("ARM: dts: imx6ul: add TQ-Systems MBa6ULx device trees") Signed-off-by: Max Merchel <[email protected]> Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx53-mba53: Fix the PCA9554 compatibleFabio Estevam2025-03-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | gpio-pca95xx.yaml documents 'nxp,pca9554', so use this compatible to fix the following dt-schema warning: failed to match any schema with compatible: ['pca9554'] Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx31: Use nand-controller as node nameFabio Estevam2025-03-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | According to mxc-nand.yaml, the correct node name must be 'nand-controller'. Change it accordingly to fix the following dt-schema warning: $nodename:0: 'nand@b8000000' does not match '^nand-controller(@.*)?' Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: tqma7: Add partitions subnode to spi-norMarkus Niebel2025-03-111-0/+6
| | | | | | | | | | | | | | | | | | | | The bootloader adds MTD partitions in this subnode if present. Add an empty partitions node which the bootloader will fill with configured MTD partitions. Signed-off-by: Markus Niebel <[email protected]> Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx7-tqma7: Add vcc-supply for spi-norAlexander Stein2025-03-111-0/+1
| | | | | | | | | | | | | | (Q)SPI NOR flash is supplied by 3.3V. Add the corresponding supply. Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: tqma6ul: Add partitions subnode to spi-norMarkus Niebel2025-03-111-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | The bootloader adds MTD partitions in this subnode if present, or in the spi-nor node itself otherwise. Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml. Fix all this by adding an empty partitions node which the bootloader will fill with configured MTD partitions. Remove the deprecated properties as well. Signed-off-by: Markus Niebel <[email protected]> Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx6ul-tqma6ul: Add vcc-supply for spi-norAlexander Stein2025-03-111-0/+1
| | | | | | | | | | | | | | (Q)SPI NOR flash is supplied by 1.8V. Add the corresponding supply. Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx6ul-tqma6ul: Order DT propertiesAlexander Stein2025-03-111-2/+2
| | | | | | | | | | | | | | 'compatible' and 'reg' are put first. Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx6qdl-tqma6: Add partitions subnode to spi-norMarkus Niebel2025-03-111-2/+6
| | | | | | | | | | | | | | | | | | | | | | The bootloader may add MTD partitions in this subnode if present. Add an empty partitions node which the bootloader will fill with configured MTD partitions. Remove #size-cells from MTD node because this is deprecated. Signed-off-by: Markus Niebel <[email protected]> Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx6qdl-tqma6: use sw4_reg as 3.3V supplyMarkus Niebel2025-03-113-15/+6
| | | | | | | | | | | | | | | | | | This matches the real hardware and allows to remove the virtual 3.3V regulator. Signed-off-by: Markus Niebel <[email protected]> Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx6qdl-tqma6: limit PMIC SW4 to 3.3VMarkus Niebel2025-03-111-1/+1
| | | | | | | | | | | | | | | | This is a fixed 3.3V rail supplying several hardware on SOM. Signed-off-by: Markus Niebel <[email protected]> Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx6qdl-tqma6: Order DT propertiesAlexander Stein2025-03-111-1/+1
| | | | | | | | | | | | | | 'compatible' and 'reg' are put first. Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx7d-sdb: Complete WM8960 power suppliesChancel Liu2025-02-251-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WM8960 has the following power supplies: - AVDD - DBVDD - DCVDD - SPKVDD1 - SPKVDD2 Add new audio regulators to reflect the schematic and complete missed power supplies. Signed-off-by: Chancel Liu <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx6ul-14x14-evk: Complete WM8960 power suppliesChancel Liu2025-02-251-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WM8960 has the following power supplies: - AVDD - DBVDD - DCVDD - SPKVDD1 - SPKVDD2 Add new audio regulators to reflect the schematic and complete missed power supplies. Signed-off-by: Chancel Liu <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: mba6ul: change sound card model nameMarkus Niebel2025-02-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The card name for ALSA is generated from the model name string and is limited to 16 characters. Use a shorter name to prevent cutting the name. Since nearly all starter kit mainboards for i.MX based SoM by TQ-Systems use the same codec with the same routing on board it is a good idea to use the same mode name for the sound card. This allows sharing a default asound.conf in BSP over all the kits. Signed-off-by: Markus Niebel <[email protected]> Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx7-mba7: change sound card model nameMarkus Niebel2025-02-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The card name for ALSA is generated from the model name string and is limited to 16 characters. Use a shorter name to prevent cutting the name. Since nearly all starter kit mainboards for i.MX based SoM by TQ-Systems use the same codec with the same routing on board it is a good idea to use the same mode name for the sound card. This allows sharing a default asound.conf in BSP over all the kits. Signed-off-by: Markus Niebel <[email protected]> Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx6qdl-mba6: change sound card model nameMarkus Niebel2025-02-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The card name for ALSA is generated from the model name string and is limited to 16 characters. Use a shorter name to prevent cutting the name. Since nearly all starter kit mainboards for i.MX based SoM by TQ-Systems use the same codec with the same routing on board it is a good idea to use the same mode name for the sound card. This allows sharing a default asound.conf in BSP over all the kits. Signed-off-by: Markus Niebel <[email protected]> Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx5: Fix the CCM interrupts descriptionFabio Estevam2025-02-183-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the i.MX5 chips the peripheral interrupts are represented directly only by their interrupt numbers. The CCM nodes are not following this format and cause the following dt-schema warnings: ccm@73fd4000: interrupts: [[0], [71], [4], [0], [72], [4]] is too long Fix it by passing only the two interrupt numbers. Run-time tested in on an imx53-qsb board. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx53-ppd: Fix touchscreen reset-gpiosFabio Estevam2025-02-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | According to atmel,maxtouch.yaml, the correct property that describes the GPIO connected to the touchscreen reset line is 'reset-gpios'. Change it accordingly to fix the following dt-schema warning: 'reset-gpio' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
| * ARM: dts: imx7s: Move csi-mux to below rootAlexander Stein2025-02-181-28/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | fsl,imx-iomuxc-gpr.yaml only contains the mux-controller but the actual video-mux is not part of it. So move it below root node. Fixes the dtbs_check warning: arch/arm/boot/dts/nxp/imx/imx7s-mba7.dtb: iomuxc-gpr@30340000: 'csi-mux' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/soc/imx/fsl,imx-iomuxc-gpr.yaml# Signed-off-by: Alexander Stein <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
* | ARM: dts: imx6qdl-apalis: Fix poweroff on Apalis iMX6Stefan Eichenberger2025-02-181-5/+5
|/ | | | | | | | | | | | | | | | The current solution for powering off the Apalis iMX6 is not functioning as intended. To resolve this, it is necessary to power off the vgen2_reg, which will also set the POWER_ENABLE_MOCI signal to a low state. This ensures the carrier board is properly informed to initiate its power-off sequence. The new solution uses the regulator-poweroff driver, which will power off the regulator during a system shutdown. Cc: <[email protected]> Fixes: 4eb56e26f92e ("ARM: dts: imx6q-apalis: Command pmic to standby for poweroff") Signed-off-by: Stefan Eichenberger <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
* Merge tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2025-01-2416-64/+44
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SoC devicetree updates from Arnd Bergmann: "We see the addition of eleven new SoCs, including a total of sixx arm64 chips from Qualcomm alone. Overall, the Qualcomm platforms once again make up the majority of all changes, after a couple of quieter releases. The new SoCs in this branch are: - Microchip sama7d65 is a new 32-bit embedded chip with a single Cortex-A7 and the current high end of the old Atmel SoC line. - Samsung Exynos 9810 is a mobile phone chip used in some older phones like the Samsung Galaxy S9 - Renesas R-Car V4H ES3.0 (R8A779G3) is an updated version of the V4H (R8A779G0) low-power automotive SoC - Renesas RZ/G3E (R0A09G047) is a family of embedded chips using Cortex-A55 cores - Qualcomm Snapdragon 8 Elite (SM8750) is a new phone chip based on Qualcomm's Oryon CPU cores. - Qualcomm Snapdragon AR2 (SAR2130P) is a SoC for augmented reality glasses. - Qualcomm IQ6 (QCS610) and IQ8 (QCS8300) are two industrial IOT platforms. - Snapdragon 425 (MSM8917) is a mobile phone SoC from 2016 - Qualcomm IPQ5424 is a Wi-Fi 7 networking chip All of the above are part of already supported SoC families that only need new devicetree files. Two additional SoCs in new families are part of a separate branch. There are 48 new machines in total, including six arm32 ones based on aspeed. broadcom, microchip and st SoCs all using Cortex-A7 cores, and a single risc-v board, the Banana Pi R3. The remaining ones use arm64 chips from Broadcom, Samsung, NXP, Mediatek, Qualcomm, Renesas and Rockchips and cover development boards, phones, laptops, industrial machines routers. A lot of ongoing work is for cleaning up build time warnings and other issues, in addition to the new machines and added features" * tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (619 commits) arm64: tegra: Fix Tegra234 PCIe interrupt-map arm64: dts: qcom: x1e80100-romulus: Update firmware nodes arm64: dts: rockchip: add DTs for Firefly ITX-3588J and its Core-3588J SoM dt-bindings: arm: rockchip: Add Firefly ITX-3588J board arm64: dts: rockchip: Add Orange Pi 5 Max board dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi arm64: dts: rockchip: add WLAN to rk3588-evb1 controller arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma arm64: dts: rockchip: Delete redundant RK3328 GMAC stability fixes arm64: tegra: Disable Tegra234 sce-fabric node arm64: tegra: Fix typo in Tegra234 dce-fabric compatible arm64: tegra: Fix DMA ID for SPI2 arm64: dts: qcom: msm8916-samsung-serranove: Add display panel arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes arm64: dts: qcom: Remove unused and undocumented properties arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes arm64: dts: qcom: pmi8950: add LAB-IBB nodes arm64: dts: qcom: ipq5424: enable the download mode support ...
generated by cgit (git 2.51.2) at 2025-12-02 06:48:18 +0000