diff options
Diffstat (limited to 'TODO')
| -rw-r--r-- | TODO | 157 |
1 files changed, 118 insertions, 39 deletions
@@ -14,23 +14,46 @@ Hey Emacs, this is -*- org -*- mode! tracked through the [[https://dev.gnupg.org/][dev.gnupg.org]] site. -* TODO Document all the new stuff. +* Documentation :PROPERTIES: - :CUSTOM_ID: more-docs-is-better + :CUSTOM_ID: documentation :END: -** STARTED Fix this TODO list. +** Document all the new stuff. :PROPERTIES: - :CUSTOM_ID: fix-todo + :CUSTOM_ID: more-docs-is-better :END: - - State "STARTED" from "TODO" [2018-03-09 Fri 08:31] - Clean up the current TODO list. Include properties as relevant (so - if someone does make a PDF or HTML version the TOC will work). - Also check ans see if some of these ancient things can be removed - (e.g. do we really need to fix things that were broken in GPG - 1.3.x? I'm thinking not so much). +*** TODO Fix this TODO list. + :PROPERTIES: + :CUSTOM_ID: fix-todo + :END: + + Clean up the current TODO list. Include properties as relevant (so + if someone does make a PDF or HTML version the TOC will work). + + Also check ans see if some of these ancient things can be removed + (e.g. do we really need to fix things that were broken in GPG + 1.3.x? I'm thinking not so much). + +**** DONE fix TODO items + CLOSED: [2018-03-04 Sun 08:55] + :PROPERTIES: + :CUSTOM_ID: fix-todo-items + :END: + + Adjust todo items so each can now be referenced by custom-id and + checked off as necessary. +** TODO Document validity and trust issues. + :PROPERTIES: + :CUSTOM_ID: valid-trust-issues + :END: + +** In gpgme.texi: Register callbacks under the right letter in the index. + :PROPERTIES: + :CUSTOM_ID: gpgme-texi + :END: * Fix the remaining UI Server problems: @@ -63,10 +86,12 @@ Hey Emacs, this is -*- org -*- mode! :END: Right now we block reading the next line with assuan. + * Before release: :PROPERTIES: :CUSTOM_ID: pre-release :END: + ** CANCELLED Some gpg tests fail with gpg 1.3.4-cvs (gpg/t-keylist-sig) CLOSED: [2018-03-09 Fri 08:16] :PROPERTIES: @@ -75,100 +100,123 @@ Hey Emacs, this is -*- org -*- mode! - State "CANCELLED" from "TODO" [2018-03-09 Fri 08:16] \\ WON'T FIX — too old or no longer applies. The test is currently disabled there and in gpg/t-import. + ** When gpg supports it, write binary subpackets directly, :PROPERTIES: :CUSTOM_ID: binary-subpackets :END: and parse SUBPACKET status lines. + * ABI's to break: :PROPERTIES: :CUSTOM_ID: abi-breakage-apparently-on-purpose :END: + ** Old opassuan interface. :PROPERTIES: :CUSTOM_ID: old-opassuan :END: + ** Implementation: Remove support for old style error codes in :PROPERTIES: :CUSTOM_ID: remove-old-error-codes :END: conversion.c::_gpgme_map_gnupg_error. + ** gpgme_edit_cb_t: Add "processed" return argument :PROPERTIES: :CUSTOM_ID: add-processed-return :END: (see edit.c::command_handler). + ** I/O and User Data could be made extensible. But this can be done :PROPERTIES: :CUSTOM_ID: add-io-user-data :END: without breaking the ABI hopefully. + ** All enums should be replaced by ints and simple macros for :PROPERTIES: :CUSTOM_ID: enums-should-be-ints :END: maximum compatibility. + ** Compatibility interfaces that can be removed in future versions: :PROPERTIES: :CUSTOM_ID: compat-interfaces-to-go :END: + *** gpgme_data_new_from_filepart :PROPERTIES: :CUSTOM_ID: gpgme-data-new-from-filepart :END: + *** gpgme_data_new_from_file :PROPERTIES: :CUSTOM_ID: gpgme-data-new-from-file :END: + *** gpgme_data_new_with_read_cb :PROPERTIES: :CUSTOM_ID: gpgme-data-new-with-read-cb :END: + *** gpgme_data_rewind :PROPERTIES: :CUSTOM_ID: gpgme-data-rewind :END: + *** gpgme_op_import_ext :PROPERTIES: :CUSTOM_ID: gpgme-op-import-ext :END: + *** gpgme_get_sig_key :PROPERTIES: :CUSTOM_ID: gpgme-get-sig-key :END: + *** gpgme_get_sig_ulong_attr :PROPERTIES: :CUSTOM_ID: gpgme-get-sig-ulong-attr :END: + *** gpgme_get_sig_string_attr :PROPERTIES: :CUSTOM_ID: gpgme-get-sig-string-attr :END: + *** GPGME_SIG_STAT_* :PROPERTIES: :CUSTOM_ID: gpgme-sig-stat :END: + *** gpgme_get_sig_status :PROPERTIES: :CUSTOM_ID: gpgme-get-sig-status :END: + *** gpgme_trust_item_release :PROPERTIES: :CUSTOM_ID: gpgme-trust-item-release :END: + *** gpgme_trust_item_get_string_attr :PROPERTIES: :CUSTOM_ID: gpgme-trust-item-get-string-attr :END: + *** gpgme_trust_item_get_ulong_attr :PROPERTIES: :CUSTOM_ID: gpgme-trust-item-get-ulong-attr :END: + *** gpgme_attr_t :PROPERTIES: :CUSTOM_ID: gpgme-attr-t :END: + *** All Gpgme* typedefs. :PROPERTIES: :CUSTOM_ID: all-gpgme-typedefs @@ -179,20 +227,24 @@ Hey Emacs, this is -*- org -*- mode! :PROPERTIES: :CUSTOM_ID: threads :END: + ** When GNU Pth supports sendmsg/recvmsg, wrap them properly. :PROPERTIES: :CUSTOM_ID: wrap-oth :END: + ** Without timegm (3) support our ISO time parser is not thread safe. :PROPERTIES: :CUSTOM_ID: time-threads :END: There is a configure time warning, though. + * New features: :PROPERTIES: :CUSTOM_ID: new-features :END: + ** Flow control for data objects. :PROPERTIES: :CUSTOM_ID: flow-control-is-not-a-euphemism-for-an-s-bend @@ -205,11 +257,13 @@ Hey Emacs, this is -*- org -*- mode! respective event loop. or (B) a way for gpgme data objects to be associated with a waitable object, that can be registered with the user event loop. Neither is particularly simple. + ** Extended notation support. When gpg supports arbitrary binary :PROPERTIES: :CUSTOM_ID: extended-notation :END: notation data, provide a user interface for that. + ** notification system :PROPERTIES: :CUSTOM_ID: notification-system @@ -236,25 +290,30 @@ Hey Emacs, this is -*- org -*- mode! :PROPERTIES: :CUSTOM_ID: stat-data :END: + ** Implement support for photo ids. :PROPERTIES: :CUSTOM_ID: photo-id :END: + ** Allow selection of subkeys :PROPERTIES: :CUSTOM_ID: subkey-selection :END: + ** Allow to return time stamps in ISO format :PROPERTIES: :CUSTOM_ID: iso-format-datetime :END: - This allows us to handle years later than 2037 properly. With the - time_t interface they are all mapped to 2037-12-31 + This allows us to handle years later than 2037 properly. With the + time_t interface they are all mapped to 2037-12-31 + ** New features requested by our dear users, but rejected or left for :PROPERTIES: :CUSTOM_ID: feature-requests :END: later consideration: + *** Allow to export secret keys. :PROPERTIES: :CUSTOM_ID: export-secret-keys @@ -262,6 +321,7 @@ Hey Emacs, this is -*- org -*- mode! Rejected because this is conceptually flawed. Secret keys on a smart card can not be exported, for example. May eventually e supproted with a keywrapping system. + *** Selecting the key ring, setting the version or comment in output. :PROPERTIES: :CUSTOM_ID: select-keyring-version @@ -269,46 +329,23 @@ Hey Emacs, this is -*- org -*- mode! Rejected because the naive implementation is engine specific, the configuration is part of the engine's configuration or readily worked around in a different way + *** Selecting the symmetric cipher. :PROPERTIES: :CUSTOM_ID: symmetric-cipher-selection :END: + *** Exchanging keys with key servers. :PROPERTIES: :CUSTOM_ID: key-server-exchange :END: -* Documentation - :PROPERTIES: - :CUSTOM_ID: documentation - :END: -** TODO Document validity and trust issues. - :PROPERTIES: - :CUSTOM_ID: valid-trust-issues - :END: -** In gpgme.texi: Register callbacks under the right letter in the index. - :PROPERTIES: - :CUSTOM_ID: gpgme-texi - :END: -** TODO Update TODO file - :PROPERTIES: - :CUSTOM_ID: todo-update - :END: - -*** DONE fix TODO items - CLOSED: [2018-03-04 Sun 08:55] - :PROPERTIES: - :CUSTOM_ID: fix-todo-items - :END: - - Adjust todo items so each can now be referenced by custom-id and - checked off as necessary. - * Engines :PROPERTIES: :CUSTOM_ID: engines :END: + ** Do not create/destroy engines, but create engine and then reset it. :PROPERTIES: :CUSTOM_ID: reset-engine-is-not-quite-just-ignition @@ -321,26 +358,31 @@ Hey Emacs, this is -*- org -*- mode! Note that we need support in gpgsm to set include-certs to default as RESET does not reset it, also for no_encrypt_to and probably other options. + ** Optimize the case where a data object has an underlying fd we can pass :PROPERTIES: :CUSTOM_ID: optimus-data-cousin-of-optimus-prime :END: directly to the engine. This will be automatic with socket I/O and descriptor passing. + ** Move code common to all engines up from gpg to engine. :PROPERTIES: :CUSTOM_ID: move-code-common-to-engines-out-of-gpg :END: + ** engine operations can return General Error on unknown protocol :PROPERTIES: :CUSTOM_ID: general-error-looking-to-be-court-martialled :END: (it's an internal error, as select_protocol checks already). + ** When server mode is implemented properly, more care has to be taken to :PROPERTIES: :CUSTOM_ID: server-mode :END: release all resources on error (for example to free assuan_cmd). + ** op_import_keys and op_export_keys have a limit in the number of keys. :PROPERTIES: :CUSTOM_ID: import-export-problems @@ -354,6 +396,7 @@ Hey Emacs, this is -*- org -*- mode! :PROPERTIES: :CUSTOM_ID: gpg-breakage :END: + ** CANCELLED gpg 1.4.2 lacks error reporting if sign/encrypt with revoked key. CLOSED: [2018-03-09 Fri 08:19] :PROPERTIES: @@ -361,6 +404,7 @@ Hey Emacs, this is -*- org -*- mode! :END: - State "CANCELLED" from "TODO" [2018-03-09 Fri 08:19] \\ WON'T FIX. + ** CANCELLED gpg 1.4.2 does crappy error reporting (namely none at all) when CLOSED: [2018-03-09 Fri 08:20] :PROPERTIES: @@ -374,6 +418,7 @@ Hey Emacs, this is -*- org -*- mode! gpg: signing failed: general error [GNUPG:] BEGIN_ENCRYPTION 2 10 gpg: test: sign+encrypt failed: general error + ** DONE Without agent and with wrong passphrase, gpg 1.4.2 enters into an CLOSED: [2018-03-09 Fri 08:20] :PROPERTIES: @@ -382,6 +427,7 @@ Hey Emacs, this is -*- org -*- mode! - State "DONE" from "TODO" [2018-03-09 Fri 08:20] \\ Must have been fixed in a subsequent release. infinite loop. + ** CANCELLED Use correct argv[0] CLOSED: [2018-03-09 Fri 08:24] :PROPERTIES: @@ -402,71 +448,86 @@ Hey Emacs, this is -*- org -*- mode! :PROPERTIES: :CUSTOM_ID: operations-are-not-surgical :END: + ** Include cert values -2, -1, 0 and 1 should be defined as macros. :PROPERTIES: :CUSTOM_ID: certified-macros :END: + ** If an operation failed, make sure that the result functions don't return :PROPERTIES: :CUSTOM_ID: operation-failure :END: corrupt partial information. !!! NOTE: The EOF status handler is not called in this case !!! + ** Verify must not fail on NODATA premature if auto-key-retrieval failed. :PROPERTIES: :CUSTOM_ID: autobot-key-retrieval :END: It should not fail silently if it knows there is an error. !!! + ** All operations: Better error reporting. !! :PROPERTIES: :CUSTOM_ID: better-reporting-not-like-fox-news :END: + ** Export status handler need much more work. !!! :PROPERTIES: :CUSTOM_ID: export-status-handler :END: + ** Import should return a useful error when one happened. :PROPERTIES: :CUSTOM_ID: import-useful-stuff-even-wrong-stuff :END: + *** Import does not take notice of NODATA status report. :PROPERTIES: :CUSTOM_ID: import-no-data :END: + *** When GPGSM does issue IMPORT_OK status reports, make sure to check for :PROPERTIES: :CUSTOM_ID: gpgsm-import-ok :END: them in tests/gpgs m/t-import.c. + ** Verify can include info about version/algo/class, but currently :PROPERTIES: :CUSTOM_ID: verify-class :END: this is only available for gpg, not gpgsm. + ** Return ENC_TO output in verify result. Again, this is not available :PROPERTIES: :CUSTOM_ID: return-to-enc :END: for gpgsm. + ** Genkey should return something more useful than General_Error. :PROPERTIES: :CUSTOM_ID: general-key-assumed-command-from-general-error :END: + ** If possible, use --file-setsize to set the file size for proper progress :PROPERTIES: :CUSTOM_ID: file-setsize :END: callback handling. Write data interface for file size. + ** Optimize the file descriptor list, so the number of open fds is :PROPERTIES: :CUSTOM_ID: optimus-descriptus-younger-brother-of-optimus-prime :END: always known easily. + ** Encryption: It should be verified that the behaviour for partially untrusted :PROPERTIES: :CUSTOM_ID: only-mostly-dead-means-partially-alive :END: recipients is correct. + ** When GPG issues INV_something for invalid signers, catch them. :PROPERTIES: :CUSTOM_ID: invalid-sig @@ -477,15 +538,18 @@ Hey Emacs, this is -*- org -*- mode! :PROPERTIES: :CUSTOM_ID: error-value :END: + ** Map ASSUAN/GpgSM ERR error values in a better way than is done now. !! :PROPERTIES: :CUSTOM_ID: map-ass-error :END: + ** Some error values should identify the source more correctly (mostly error :PROPERTIES: :CUSTOM_ID: source-errors :END: values derived from status messages). + ** In rungpg.c we need to check the version of the engine :PROPERTIES: :CUSTOM_ID: rungpg-c-engine-ver @@ -498,6 +562,7 @@ Hey Emacs, this is -*- org -*- mode! :PROPERTIES: :CUSTOM_ID: tests :END: + ** TODO Write a fake gpg-agent so that we can supply known passphrases to :PROPERTIES: :CUSTOM_ID: test-fake-gpg-agent @@ -505,23 +570,28 @@ Hey Emacs, this is -*- org -*- mode! gpgsm and setup the configuration files to use the agent. Without this we are testing a currently running gpg-agent which is not a clever idea. ! + ** t-data :PROPERTIES: :CUSTOM_ID: test-data :END: + *** Test gpgme_data_release_and_get_mem. :PROPERTIES: :CUSTOM_ID: test-gpgme-data-release-mem :END: + *** Test gpgme_data_seek for invalid types. :PROPERTIES: :CUSTOM_ID: test-gpgme-data-seek :END: + ** t-keylist :PROPERTIES: :CUSTOM_ID: test-keylist :END: Write a test for ext_keylist. + ** Test reading key signatures. :PROPERTIES: :CUSTOM_ID: test-key-sig @@ -532,6 +602,7 @@ Hey Emacs, this is -*- org -*- mode! :PROPERTIES: :CUSTOM_ID: debug :END: + ** Tracepoints should be added at: Every public interface enter/leave, :PROPERTIES: :CUSTOM_ID: tracepoint-pub-int @@ -547,6 +618,7 @@ Hey Emacs, this is -*- org -*- mode! decrypt-verify.c delete.c edit.c encrypt.c encrypt-sign.c export.c genkey.c import.c key.c keylist.c passphrase.c progress.c signers.c sig-notation.c trust-item.c trustlist.c verify.c + ** TODO Handle malloc and vasprintf errors. But decide first if they should be :PROPERTIES: :CUSTOM_ID: malloc-vasprintf @@ -559,10 +631,12 @@ Hey Emacs, this is -*- org -*- mode! :PROPERTIES: :CUSTOM_ID: build-suite :END: + ** TODO Make sure everything is cleaned correctly (esp. test area). :PROPERTIES: :CUSTOM_ID: clean-tests :END: + ** TODO Enable AC_CONFIG_MACRO_DIR and bump up autoconf version requirement. :PROPERTIES: :CUSTOM_ID: autoconf-macros @@ -575,6 +649,7 @@ Hey Emacs, this is -*- org -*- mode! :PROPERTIES: :CUSTOM_ID: error-checking :END: + ** TODO engine-gpgsm, with-validation :PROPERTIES: :CUSTOM_ID: gpgsm-validation @@ -615,7 +690,11 @@ Hey Emacs, this is -*- org -*- mode! Write a guide/best practices for maintainers of GPGME packages with third party package management systems. -Copyright 2004, 2005, 2018 g10 Code GmbH + +* Copyright 2004, 2005, 2018 g10 Code GmbH + :PROPERTIES: + :CUSTOM_ID: copyright-and-license + :END: This file is free software; as a special exception the author gives unlimited permission to copy and/or distribute it, with or without |