KeyServerSettingsPageKey Server List金鑰伺服器清單Add a Key Server新增金鑰伺服器Operations操作Add新增Set As Default設為預設Test Selected測試選取項目Delete Selected刪除選取項目https://keys.example.orghttps://keys.example.orgA new key server is tested against the HKP and VKS interfaces before it is added. Searching uses HKP; publishing and refreshing use VKS.新增金鑰伺服器前，會先測試其 HKP 與 VKS 介面。搜尋使用 HKP；發布與重新整理使用 VKS。A new key server is tested against the HKP and VKS interfaces before it is added. Searching uses HKP. Publishing and refreshing always use the default server: over VKS where it offers it, over HKP otherwise.新增金鑰伺服器前，會先測試其 HKP 與 VKS 介面。搜尋使用 HKP。發布與重新整理一律使用預設伺服器：若支援 VKS 則使用 VKS，否則使用 HKP。Default預設Address位址HKPHKPVKSVKSStatus狀態Last Tested上次測試yes是no否Verified已驗證Unverified未驗證never從未Invalid Address無效位址"%1" is not a valid key server address.「%1」不是有效的金鑰伺服器位址。Already Listed已列出%1 is already in the key server list.%1 已存在於金鑰伺服器列表中。Insecure Key Server Address不安全的金鑰伺服器位址%1 uses plain HTTP, so anyone on the network can see and change what you look up or publish. Add it anyway?%1 使用純 HTTP，因此網路上的任何人都可以查看或變更您查詢或發布的內容。仍要新增嗎？No Verified Publishing無驗證發布%1 does not support the VKS interface, so publishing and refreshing will use HKP instead.
Over HKP the server does not confirm your email address, and an uploaded key cannot be removed again.
Use %1 as the default anyway?%1 不支援 VKS 介面，因此發布與重新整理將改用 HKP。
透過 HKP，伺服器不會確認您的電子郵件地址，且上傳的金鑰無法再次移除。
是否仍要將 %1 設為預設？Key Server Not Verified金鑰伺服器未驗證%1 did not answer as a key server.
%2
It has been added and marked unverified; use Test Selected to try again.%1 未以金鑰伺服器身分回應。
%2
它已新增並標記為未驗證；請使用「測試選取項目」再試一次。ModuleKeyServerSyncThe following email addresses have status:
以下電子郵件地址的狀態為：Could not parse status information.無法解析狀態資訊。Public Key Upload Successful公鑰上傳成功The public key was successfully uploaded to the key server keys.openpgp.org.
Fingerprint: %1
%2
Please check your email (%3) for further verification from keys.openpgp.org.
Note: For verification, you can find more information here: https://keys.openpgp.org/about公鑰已成功上傳至金鑰伺服器 keys.openpgp.org。
指紋：%1
%2
請檢查您的電子郵件（%3）以接收 keys.openpgp.org 的進一步驗證通知。
注意：如需驗證相關資訊，請參閱此處：https://keys.openpgp.org/aboutKey Upload Failed金鑰上傳失敗Failed to export the public key before uploading.
Key: %1上傳前匯出公鑰失敗。
金鑰：%1The public key was successfully uploaded to the key server %4.
Fingerprint: %1
%2
Please check your email (%3) for further verification from %4.公鑰已成功上傳至金鑰伺服器 %4。
指紋：%1
%2
請檢查您的電子郵件（%3）以接收 %4 的進一步驗證通知。Failed to upload public key to the server.
Fingerprint: %1
Error: %2無法將公鑰上傳至伺服器。
指紋：%1
錯誤：%2The key server did not return a key.金鑰伺服器未回傳金鑰。Publish Without Verification?不經驗證即發布？%1 does not support verified publishing (VKS), so the key would be uploaded over HKP instead.
The server will not confirm your email address, and the upload cannot be undone: HKP key servers do not allow keys to be removed.
Publish to %1 anyway?%1 不支援驗證發布（VKS），因此金鑰將改為透過 HKP 上傳。
伺服器不會確認您的電子郵件地址，且上傳無法撤銷——HKP 金鑰伺服器不允許移除金鑰。
仍要發布至 %1 嗎？%1: the public key could not be exported%1：無法匯出公鑰Key Refresh Stopped金鑰重新整理已停止Key Publishing Stopped金鑰發布已停止the fetched keys could not be imported: the key database is no longer available無法匯入擷取到的金鑰：金鑰資料庫已無法使用Key Refresh Finished金鑰重新整理完成Key Publishing Finished金鑰發布完成A key server operation is already running. Try again when it has finished.已有金鑰伺服器操作正在執行。請等它完成後再試一次。Key Servers金鑰伺服器keyserver,key server,hkp,vks,publish,searchkeyserver,key server,hkp,vks,publish,search,金鑰伺服器,發布,搜尋The public key was uploaded to the key server %2 over HKP.
Fingerprint: %1公鑰已透過 HKP 上傳至金鑰伺服器 %2。
指紋：%1Key Update Failed金鑰更新失敗The public key was fetched but could not be imported, because its key database is no longer available.
Key ID: %1已擷取公鑰，但無法匯入，因為其金鑰資料庫已無法使用。
金鑰 ID：%1Failed to retrieve public key from %3.
Key ID: %1
Error: %2無法從 %3 擷取公鑰。
金鑰 ID：%1
錯誤：%2Upload the public key to the key server used for syncing將公鑰上傳到用於同步的金鑰伺服器Import the latest copy of the public key from the key server從金鑰伺服器匯入該公鑰的最新副本Check Publication Status檢查發布狀態Ask the key server whether it has this public key詢問金鑰伺服器是否存有此公鑰Publication Status發布狀態The public key has been published on %1.公鑰已發布於 %1。The public key is not published on %1.公鑰未發布於 %1。Could not ask %1 about this key.
%2無法向 %1 查詢此金鑰。
%2Failed to retrieve public key from the server.
Key ID: %1
Error: %2無法從伺服器擷取公鑰。
金鑰 ID：%1
錯誤：%2Key Server金鑰伺服器Import public keys from a trusted key server.從受信任的金鑰伺服器匯入公鑰。Key Server Operations金鑰伺服器操作Publish Public Key to Key Server將公鑰發佈至金鑰伺服器Refresh Public Key From Key Server從金鑰伺服器更新公鑰The server could not be reached.無法連線至伺服器。The server responded, but not as a key server: it supports neither the HKP nor the VKS interface.伺服器已回應，但並非金鑰伺服器：既不支援 HKP 也不支援 VKS 介面。Failed:失敗：The key server does not have this key.金鑰伺服器沒有此金鑰。%1 of %2 keys were fetched from the key server.已從金鑰伺服器取得 %2 個金鑰中的 %1 個。%1 of %2 keys were published to the key server %3.已將 %2 個金鑰中的 %1 個發布至金鑰伺服器 %3。The key databases were changed while this was running, so it was stopped after %1 of %2 keys. Nothing fetched was imported. Please start it again.執行期間金鑰資料庫已變更，因此在處理 %2 把金鑰中的 %1 把後停止。未匯入任何擷取到的金鑰。請重新開始。SearchKeyDialogKey ID金鑰 IDUIDUIDCreation Date建立日期Expiration Date到期日期Algorithm演算法Key Size金鑰大小Status狀態By Key ID依金鑰 IDBy Email依電子郵件By Fingerprint依指紋Enter a value, then press Enter or Search輸入數值後，按 Enter 或搜尋Search value is empty.搜尋值為空。Key server URL is empty.金鑰伺服器 URL 為空。Invalid key server URL format.金鑰伺服器 URL 格式無效。Invalid email format.電子郵件格式無效。Invalid fingerprint format. It should be a hex string of length 16, 40 or 64.指紋格式無效。應為長度 16、40 或 64 的十六進位字串。Invalid fingerprint format. It should be a hex string of length 16 or 40.指紋格式無效。應為長度 16 或 40 的十六進位字串。Invalid Key ID format. It should be a hex string of length 8 or 16.金鑰 ID 格式無效。應為長度 8 或 16 的十六進位字串。Unknown search type.未知的搜尋類型。No keys found matching your search.找不到符合搜尋條件的金鑰。(no user ID published)（未發布使用者 ID）Unknown未知Never從未No GPG context is available.沒有可用的 GPG 環境。Search Keys搜尋金鑰Key Server金鑰伺服器Search Type搜尋類型Search Value搜尋值Search搜尋Tips: double click to import the selected key.提示：雙擊可匯入所選金鑰。