* src/engine-assuan.c (inquire_cb): Implement returning data.
* tests/opassuan/t-command.c (inq_cb): Send some test data.
--
The old code only allowed to send an empty response which was good
enough for scdaemon's KNOWNCARDP inquire but not to send actual data.
A quick test using a test smartcard might be
./t-command 'scd setattr --inquire PRIVATE-DO-1'
and then reading the data back using
gpg-connect-agent 'scd getattr PRIVATE-DO-1' /bye
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (gpgme_op_setexpire_start, gpgme_op_setexpire): New.
* src/libgpgme.vers, src/gpgme.def: Add new functions.
* src/genkey.c (setexpire): New.
(gpgme_op_setexpire_start, gpgme_op_setexpire): New.
* src/engine.h, src/engine.c: (_gpgme_engine_op_setexpire): New.
* src/engine-backend.h (engine_ops): Add 'setexpire' and adjust all
engine initializers.
* src/engine-gpg.c (gpg_setexpire): New.
(_gpgme_engine_ops_gpg): Set setexpire to gpg_setexpire.
* doc/gpgme.texi: Document new functions.
* tests/run-genkey.c: Add option --setexpire.
--
This extends GPGME to support the --quick-set-expire command
added by GnuPG 2.1.22. This allows changing subkeys expiry
date without going through the editinteractor interface.
Co-authored-by: Andre Heinecke <aheinecke@gnupg.org>
GnuPG-bug-id: 4999
* src/gpgme.h.in: Clarify that the trustlist function should not be
used.
* src/engine.c (_gpgme_engine_op_trustlist): Always return an error.
* src/engine-backend.h (struct engine_ops): Remove trustlist member.
* src/engine-gpg.c (gpg_trustlist): Remove.
(struct engine_ops): Remove that member. Also in all other engines.
* tests/gpg/t-trustlist.c: Remove.
* lang/python/tests/t-trustlist.py: Remove.
--
This never worked in reality because the required feature has been
removed from GnuPG version 1.3.2 soon after introduction of this
feature in gpgme - 17 years ago. It was anyway marked as
experimental. We keep the API and ABI, though.
GnuPG-bug-id: 4834
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/json/t-keylist-secret.out.json: Do not check for keygrip
of bravo key.
--
Since GnuPG 2.2.19 the keygrip is not emitted for public keys
in a keylisting --with-secret.
As the GPGME test suite should pass with several versions
the json test cannot test this as the suite does not allow
version checks for different output.
What the intended behavior is might still be up for discussion,
always adding --with-keygip is not a good solution because
it slows down keylistings for large keyrings.
GnuPG-Bug-Id: T4820
* tests/json/t-keylist-secret.out.json
--
Since at least 2.2.19 GnuPG no longer emits secret = true
for keys where it does not have a secret. To avoid
failures with older versions we remove the check altogether.
GnuPG-Bug-Id: T4820
* src/gpgme.h.in (struct _gpgme_user_id): Add field 'uidhash'.
* src/key.c (gpgme_key_unref): Free it.
* src/keylist.c (keylist_colon_handler): Set it.
* tests/run-keylist.c (main): Print it.
--
The uidhash value is part of gpg's output since the year 2005. This
now adds support to gpgme. The application for uidhash is to select
a user id in an edit interactor: Instead of giving the number of the
user id, the uidhash value can be be used to avoid tracking the user
id numbers.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/json/t-decrypt-verify.out.json: Remove check with key of
04071FB807287134.
--
GnuPG 2.3 changes how public key decryption works; It collects list of
PUBKEY_ENC packets and then processes an ENCRYPTED* packet. At the
stage of processing an ENCRYPTED* packet, it checks if private keys
can decrypt any of PUBKEY_ENC packets. It does not necessarily
examine all of PUBKEY_ENC packets. Only when it finds a PUBKEY_ENC
packet cannot be decrypted, it reports STATUS_NO_SECKEY with keyid of
that packet.
GnuPG 2.2 or older tries PUBKEY_ENC packets in order, and the first
successful PUBKEY_ENC packet is used. Rest of PUBKEY_ENC packets are
not examined, but STATUS_NO_SECKEY with keyid is reported even when
there is a valid private key.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/run-threaded.c (random_data_close): Correct FD test.
--
An invalid DS is -1 and not 0; this fix is for correctness and does
not chnage anything in the real world.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/run-threaded.c (main): Handle allow-del.
(allow-del): New. Variable to allow deletion of keys.
(import): Delete key after import if allow-del is set.
(delete_impres): Delete keys from an import result.
(delete_fpr): Delete a key by fingerprint.
--
This is intended to test write access and locking of the
keyring by repeatedly importing and deleting pubkeys.
It is an option because it might cause keyring corruption
etc. so it should be explicitly enabled.
* tests/gpg/cipher-3.asc: add an encrypted file containing signatures
(one from a known key, and one from an unknown key)
* tests/gpg/cipher-no-sig.asc: add an encrypted file containing no
signatures at all
--
We currently aren't using these files yet, but they should be useful
for exercising the library in unusual circumstances (where the bugs
are).
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* tests/run-verify.c (print_result): Chack is_de_vs.
* tests/run-import.c (main): Fix bad parameter for format string.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/Makefile.am (run-threaded): Add.
* tests/run-threaded.c: New.
--
This test is intended to help detect race conditions
or other multithread problems. It can also be used
to put the whole GnuPG system under extreme load.
* tests/gpg/t-support.h (check_gpg_version, compare_versions),
(parse_version_string, parse_version_number): Remove version
check code.
* tests/json/t-json.c (check_gpg_version, compare_versions),
(parse_version_string, parse_version_number): Add.
--
t-support header was not a good place for this. It should
go into a library e.g. gpgrt in the future. For now we
can keep it close to where it is needed.
* t-config-opt.in.json,
t-config-opt.out.json,
t-import.in.json,
t-import.out.json,
t-sign.in.json,
t-sign.out.json: New.
--
These should actually have been in a previous commit as
they are already registered.
* tests/json/t-json.c (test_contains): Try all siblings of
the haystack child.
--
This fixes the case where we don't match against the
first child because the order might have changed or
a new element was inserted at the top. Then we
have to try out also all the siblings.
* t-json.c (tests): Register new tests.
* t-createkey.in.json,
t-createkey.out.json,
t-decrypt-verify.in.json,
t-decrypt-verify.out.json,
t-decrypt.in.json,
t-decrypt.out.json,
t-delete.in.json,
t-delete.out.json,
t-encrypt-sign.in.json,
t-encrypt-sign.out.json,
t-encrypt.in.json,
t-encrypt.out.json,
t-export-secret-info.in.json,
t-export-secret-info.out.json,
t-export.in.json,
t-export.out.json,
t-json.c,
t-keylist-secret.in.json,
t-keylist-secret.out.json,
t-keylist.in.json,
t-keylist.out.json,
t-verify.in.json,
t-verify.out.json,
t-version.in.json,
t-version.out.json: New.
--
Except for help and getmore there is now a test for each command.
* tests/json/t-json.c (test_contains): When searching for "*" accept
every string.
--
This allows it to write tests that check for the existence of
a string value but don't care about the contents. E.g. for Data.
* tests/json/t-json.c (main): Skip if version is not at least
2.2.0
--
In the past new tests often failed when a modern GPGME was
used with old GnuPG's.
This should avoid the hassle for packagers without the
requirement that we test against old versions.
* t-support.h (parse_version_number, parse_version_string)
(compare_versions): New. Copy&Paste from src/version.c
(check_gpg_version): New helper to check for a gpg version.
--
This should make it easier to write tests that e.g.
rely on modern gnupg features.
* configure.ac: Configure makefile.
* tests/Makefile.am: Run json tests if gpg tests are run.
* tests/json/t-json.c: New testrunner for json tests.
* tests/json/t-config.in, tests/json/t-config.out: First test.
--
The idea of this test runner is that it only looks for parts
in the output. This should allow it to write robust tests
that check for the basics in the output but don't fail when
the output is extended or slightly changed.
* src/context.h (gpgme_context): Extend with trust_model.
* src/engine-gpg.c (engine_gpg): Extend with trust_model.
(gpg_set_engine_flags): Take trust_model from context.
(build_argv): Handle trust_model.
(gpg_release): Free trust_model.
* src/gpgme.c (gpgme_set_ctx_flag): Handle trust-model flag.
(gpgme_release): Release trust-model.
* doc/gpgme.texi: Document new flag for gpgme_set_ctx_flag.
(Context Flags): New subsection for the context flags.
* tests/run-keylist.c (show_usage, main): Add new --trust-model
parameter.
--
This gives a GPGME user fine grained control over the
trust-model.
Changing the trust model for only a single application depends
on:
GnuPG-Bug-Id: T4134
Maniphest Tasks: T4134
Differential Revision: https://dev.gnupg.org/D466
* lang/python/tests/Makefile.am,
lang/qt/tests/Makefile.am,
tests/Makefile.am,
tests/gpg/Makefile.am,
tests/gpgsm/Makefile.am,
tests/opassuan/Makefile.am (GNUPGHOME): Make variable explict.
--
If the build directory has too long path, gpgme could fail.
This is similar to
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=847206
In order to fix that, this patch extracts the GNUPGHOME variable
to be presented directly in the Makefile and thus overridable by
command line option.
A build system can then create a symlink to the GNUPGHOME directory
in /tmp and use that symlink as the GNUPGHOME directory
thus making the path very short.
GnuPG-Bug-Id: T4091
Patch provided by vlmarek
* src/engine-gpg.c (engine_gpg): Add diagnostics member.
(gpg_release): Release diagnostics data.
(gpg_new): Set up logger-fd and diagnostics.
(gpg_getauditlog): New. Copy diagnostics to a user data.
(engine_ops): Add getauditlog.
* src/engine-gpgsm.c (gpgsm_getauditlog): Return not implemented
for GPGME_AUDITLOG_DIAG.
* src/getauditlog.c (getauditlog_start): Don't reset engine
for diagnostics.
* src/gpgme.h.in (GPGME_AUDITLOG_DIAG): New.
(GPGME_AUDITLOG_DEFAULT): New alias to 0.
* tests/run-decrypt.c (show_usage, main): Add --diagnostics.
* doc/gpgme.texi(Additional Logs): Document getauditlog.
--
This enables users of GPGME to get more verbose information
from gpg which can assist users in figuring out a problem
that was before hidden behind a generalized error like
"Decryption Failed".
For GPGSM it is not yet available as it is problematic to
get it properly in server mode and GPGSM already had the
original audit log mechanism in place.
GPGME_AUDITLOG_DEFAULT was added for a more explicit
documentation.
