* src/gpgme.h.in: Mention that Address is not always in addr-spec.
--
The old comment made it look like you could always expect the
address to be parsable as a mailbox address.
* src/data-identify.c (basic_detection): Return signature for
signature.
--
This causes identify to return signature for both binary and
ascii armored detached signatures where previously it would
have returned signed for armored signatures and signature for
binary signatures.
GnuPG-Bug-Id: 2314
* src/b64dec.c: New. Taken from gnupg. Prefix function names with
_gpgme_ and change to use standard C malloc functions.
* src/util.h.h (struct b64state): New.
* src/Makefile.am (main_sources): Add file.
--
The file b64dec.c has been taken from gnupg commit
e430ff6ad0b7dcfcebd92b825dd5168205447ff3
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (GPGME_DATA_TYPE_PGP_ENCRYPTED): New.
(GPGME_DATA_TYPE_PGP_SIGNATURE): New.
* src/data-identify.c: Add enum for OpenPGP packet types.
(buf32_to_ulong): New.
(next_openpgp_packet): New. Based on the gnupg/kbx/keybox-openpgp.c
implementation and relicensed to LGPL by g10 Code.
(pgp_binary_detection): New.
(basic_detection): Call pgp_binary_detection instead of returning
unknown.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (GPGME_STATUS_NOTATION_FLAGS): New.
* src/status-table.c (status_table): Add new status.
* src/verify.c (parse_notation): Handle flags. Also fix NOTATION_DATA
in case gpg would not percent-escape spaces.
(_gpgme_verify_status_handler): Handle flags.
* tests/run-verify.c (print_result): Print notaion data.
--
Note that this does only work with the soon to be released GnuPG
2.1.13.
* src/posix-io.c [__linux__]: Include dirent.h.
(get_max_fds) [__linux__]: Try to figure out the highest used fd.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (gpgme_data_seek_cb_t, gpgme_data_seek): Clarify that
these functions return the new offset.
(gpgme_data_release_cb_t): Fix name of parameter.
Signed-off-by: Justus Winter <justus@gnupg.org>
* src/gpgme.h.in (gpgme_set_ctx_flag): New prototype.
* src/gpgme.c (gpgme_set_ctx_flag): New.
* src/gpgme.def, src/libgpgme.vers: Add new function.
* src/context.h (struct gpgme_context): Add FULL_STATUS.
* src/decrypt.c (_gpgme_decrypt_status_handler): Do not call the
status callback if FULL_STATUS is set.
* src/genkey.c (genkey_status_handler): Ditto.
* src/passphrase.c (_gpgme_passphrase_status_handler): Ditto.
* src/sign.c (_gpgme_sign_status_handler): Ditto.
* src/engine-backend.h (struct engine_ops): Add SET_STATUS_CB and add
adjust all definitions of that variable.
* src/engine.c (_gpgme_engine_set_status_cb): New.
* src/op-support.c (_gpgme_op_reset): Call this function.
* src/engine-gpg.c (struct engine_gpg): Add fields MON_CB and
MON_CB_VALUE.
(gpg_set_status_cb): New.
(_gpgme_engine_ops_gpg): Register that function.
(read_status): Call the monitor callback.
* src/engine-gpgsm.c (struct engine_gpgsm): Add fields MON_CB and
MON_CB_VALUE.
(_gpgme_engine_ops_gpgsm): Register that function.
(gpgsm_assuan_simple_command): Change first arg to be an engine
context and adjust call callers. Call the monitor callback.
* src/engine-uiserver.c (struct engine_uiserver): Add fields MON_CB
and MON_CB_VALUE.
(_gpgme_engine_ops_uiserver): Register that function.
(uiserver_assuan_simple_command): Change first arg to be an engine
context and adjust call callers. Call the monitor callback.
* tests/run-verify.c (status_cb): New.
(print_result): Print algo names.
(main): Add option --status.
--
This new feature is mainly intended for bug tracking. Having access
to the raw status lines might also be useful for applications, though.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/verify.c (verify_start): Do not return GPG_ERR_INV_VALUES when
when SIGNED_TEXT is not given.
--
The original idea behind this restriction probably was that it is
useless to verify a non-detached signatures without also returning the
signed text. However, it is sometimes useful to just check the
signature, for example to see who signed it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/delete.c (delete_status_handler): Remove default case from a
switch so that cc can check the use of all enum values.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (w32-qt): Remove option and Qt checks.
* src/Makefile.am: Remove BUILD_W32_QT handling.
* src/kdpipeiodevice.cpp,
src/kdpipeiodevice.h,
src/kdpipeiodevice.moc,
src/w32-qt-io.cpp: Removed.
--
This code was intended for Kleopatra but Kleopatra is not using
it anymore. QGpgme/dataprovider is a better replacement for this.
* src/posix-io.c [HAVE_STDINT_H]: Include stdint.h.
(get_max_fds): Limit returned value for too high values.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/w32-util.c (mkstemp): Rename to my_mkstemp. Change caller.
--
For some reason the linker seems to use the mkstemp now provided by
mingw instead of our static symbol. Strange.
Reported-by: Andrej Kacian <andrej@kacian.sk>
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/delete.c (delete_status_handler): Return on ERROR status, if the
error location is set to "delete_key.secret" and the code is either
CANCELED or FULLY_CANCELED, which indicates a situation that the user
selected "No" on the confirmation dialog.
* src/passwd.c (passwd_start): set engine passphrase command handler.
--
This allows for inquiring a passphrase when changing a passphrase rather
than requiring a pinentry.
* src/gpgme.c (gpgme_set_global_flag): Add flag "w32-inst-dir";
* src/posix-util.c (_gpgme_set_override_inst_dir): New stub.
* src/w32-util.c (override_inst_dir): New var.
(_gpgme_get_inst_dir): Return this var is set.
(_gpgme_set_override_inst_dir): New.
--
See
https://lists.gnupg.org/pipermail/gnupg-devel/2015-September/030267.html
for background.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/argparse.c, src/argparse.h: New. Taken from current gnupg.
* src/Makefile.am (gpgme_tool_SOURCES): New.
* src/gpgme-tool.c: Remove all argp.h stuff.
(my_strusage): New.
(main): Change to use argparse.
--
As a GnuPG related tool the user should get the same experience in
option parsing as with gpg et al. Thus we use the same parser.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (_GPGME_INLINE): Define using GPGRT_INLINE if
possible. Fix problem with -Wundef by adding an extra "defined()".
(_GPGME_GCC_VERSION): Define using GPGRT_ macro if possible.
* src/engine-assuan.c (llass_new): Don't treat ttyname_r error as
fatal.
* src/engine-g13.c (g13_new): Likewise.
* src/engine-gpg.c (gpg_new): Likewise.
* src/engine-gpgsm.c (gpgsm_new): Likewise.
* src/engine-uiserver.c (uiserver_new): Likewise.
--
Even though isatty() returns 1, ttyname_r() may fail in many ways, e.g.,
when /dev/pts is not accessible under chroot. Since all our uses of
ttyname_r() require that the function works, we can treat the failure as
if isatty() fails.
Signed-off-by: Daiki Ueno <ueno@gnu.org>
* src/gpgme.h.in (GPGME_STATUS_FAILURE): New.
* src/status-table.c (FAILURE): New.
* src/op-support.c (_gpgme_parse_failure): New.
* src/passphrase.c (_gpgme_passphrase_status_handler): Forward FAILURE
status line to the status callback.
* src/decrypt.c (op_data_t): Add field failure_code.
(_gpgme_decrypt_status_handler): Parse that code and act upon it on EOF.
* src/encrypt.c (op_data_t): Add field failure_code.
(_gpgme_encrypt_status_handler): Parse that code and act upon it on EOF.
* src/genkey.c (op_data_t): Add field failure_code.
(genkey_status_handler): Parse that code and act upon it on EOF.
* src/passwd.c (op_data_t): Add field failure_code.
(passwd_status_handler): Parse that code and act upon it on EOF.
* src/sign.c (op_data_t): Add field failure_code.
(_gpgme_sign_status_handler): Parse that code and act upon it on EOF.
* src/verify.c (op_data_t): Add field failure_code.
(_gpgme_verify_status_handler): Parse that code and act upon it on EOF.
--
This requires GnuPG 2.1.8 to actually make a difference.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/passphrase.c (_gpgme_passphrase_status_handler): Call status_cb.
--
Frankly, we should have a more generic way of feeding the status_cb
handler than our current ad-hoc method.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/w32-util.c (find_program_at_standard_place): Remove.
(_gpgme_get_gpg_path): Make the search order more explicit.
(_gpgme_get_gpgconf_path): Ditto.
(_gpgme_get_w32spawn_path): Search only in the inst_dir.
--
This tries to avoid possible unclear bug reports by removing the
fallback to the current gpg4win installation directory for the gpgme
helper. It is expected that users of gpgme installing their own gpgme
version also install the matching helper.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/debug.c (debug_init) [W32]: Show libgpgme installation dir.
--
I expect that gpgme will be distributed by applications and thus it
will be helpful to see in the debug log which gpgme is actually used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/passphrase.c (_gpgme_passphrase_status_handler): Parse
GPGME_STATUS_INQUIRE_MAXLEN.
* src/passphrase.c (_gpgme_passphrase_command_handler): Send the
INQUIRE_MAXLEN status message.
--
Fixes passing this status message along when decrypting symmetric data
from gpg.
* src/gpgme.h.in: (gpgme_status_code_t): Add INQUIRE_MAXLEN.
* src/status-table.c (status_table_s): Ditto.
* src/genkey.c (genkey_status_handler): Parse INQUIRE_MAXLEN.
* src/decrypt.c (_gpgme_decrypt_status_handler): Ditto.
* src/sign.c (_gpgme_sign_status_handler): Ditto.
This status message informs the client of the maximum length of an
inquired line. It is sent from gpg and forwarded to the client via
gpgme_status_cb_t.
* src/gpgme.h.in (gpgme_set_status_cb): New.
(gpgme_get_status_cb): New.
(gpgme_status_cb_t): New.
* src/gpgme.c (gpgme_set_status_cb): New.
(gpgme_get_status_cb): New.
* src/context.h (status_cb): New.
(status_cb_value): New.
* src/gpgme.def: Export new symbols.
* src/libgpgme.vers: Ditto.
* doc/gpgme.texi: Document these new functions.
--
This callback function is used to forward status messages from gpg back
to the client.
* src/genkey.c (genkey_start): set engine passphrase command handler.
--
This allows for inquiring a new passphrase during key generation rather
than requiring a pinentry. Needs a patch to gnupg to make use of
--command-fd with --gen-key.
* doc/gpgme.texi: Document offline mode.
* src/context.h (gpgme_context): Add offline.
* src/engine-backend.h (keylist, keylist_ext): Add engine_flags.
* src/engine.c, src/engine.h (_gpgme_engine_op_keylist): Ditto.
(_gpgme_engine_op_keylist_ext): Ditto.
* src/engine.h (GPGME_ENGINE_FLAG_OFFLINE): New.
* src/engine-gpg.c (gpg_keylist, gpg_keylist_ext): Ditto.
* src/engine-gpgsm.c (gpgsm_keylist): Handle engine_flags.
(gpgsm_keylist_ext): Ditto.
* src/gpgme.c (gpgme_set_offline, gpgme_get_offline): New.
* src/gpgme.def (gpgme_set_offline, gpgme_get_offline): New.
* src/gpgme.h.in (gpgme_set_offline, gpgme_get_offline): New.
* src/libgpgme.vers (gpgme_set_offline, gpgme_get_offline): New.
* src/keylist.c (gpgme_op_keylist_start): Set offline flag.
(gpgme_op_keylist_ext_start): Ditto.
* tests/run-keylist.c (show_usage, main): Add offline argument.
--
The offline engine option was introduced with gpgsm 2.1.6
it is mainly useful for a full keylisting that includes
the certificate validation but does not depend on external
information that could take an indefinite amount of time to
collect.
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* src/engine-gpgsm.c (gpgsm_assuan_simple_command): Do not terminate
on a status lines.
--
This bug has been with us since the support for gpgsm: If there is no
status line handler but a status line is received anyway the command
handling loop terminates and thus the command/answer order gets out of
sync. In the case of the bug report this is triggered by sending an
option which starts the agent and that starting emits a "PROGRESS"
status line.
The solution is not to stop reading after a status line but record a
possible error code and return that only after OK or ERR.
GnuPG-bug-id: 1795
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/debug.h: Change macros to not have a literal 0 as last
expression of the comma operator.
* src/debug.c (_gpgme_debug_frame_end): Return 0.
(_gpgme_debug): Return 0.
--
Instead of using
foo(), 0
for the trace macros we let foo() return 0 instead.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/verify.c (calc_sig_summary): Handle GPG_ERR_CERT_REVOKED.
--
parse_new_sig() handles a revoked key by setting sig->status to
GPG_ERR_CERT_REVOKED, but then later calc_sig_summary() expects that
code in sig->validity_reason.
Additional comments added by wk.
* src/engine-gpg.c (gpg_keylist_preprocess): Increment SRC for a
backslash.
--
This bug is not exploitable because this bug fills up .data with
backslashes and thus causes the segv.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/Makefile.am (extra_ltoptions): New.
(libgpgme_la_LDFLAGS): Use it.
(libgpgme_pthread_la_LDFLAGS): Ditto.
(libgpgme_glib_la_LDFLAGS): Ditto.
--
Since gcc 4.8 there is a regression in Mingw64 in that plain C
programs may link to libgcc_s.a which has a dependency on
libgcc_s_sjlj.dll. This is for example triggered by using long long
arithmetic on a 32 bit Windows (e.g symbol __udivdi3).
Note that we don't use this patch for the Qt version which, as C++
programs, actually requires that DLL,
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/engine-spawn.c (add_data): Fix malloc
--
Bummer. Why did I subtracted one from the size? Did I assume a
dynamically allocated structure with a string field which was not
going to be used? Very strange.
Not a real problem though because malloc will anyway round up the
allocation to at least the next word size.
Detected by Stack 0.3.
* src/context.h (OPDATA_EXPORT): New.
* src/export.c (op_data_t): New.
(release_op_data): New.
(parse_error): New.
(export_status_handler): New.
(export_start, export_ext_start): Prepare op_data.
(gpgme_op_export_ext, gpgme_op_export_keys): Return an error from the
status handler.
--
To support an error return also for the async functions we need to
extend the API. Until we have done that this new features helps at
least in some cases; in particular for --send-keys.
* src/sign.c (gpgme_op_sign_result): Reformat and take care of failed
malloc.
--
Although _gpgme_debug_trace() is current always true, the code should
be run always and not just in trace mode. Also added error checking
to malloc and strdup. And while at replace some while by for loop for
easier readability.
* src/sign.c (gpgme_op_sign_result): Test that invalid and valid
signatures add up to gpgme_signers_count().
--
When invalid and valid signatures do not equal gpgme_signers_count() it
means that there was a bad passphrase during signing after the first
signer. This leaves the result.signatures from previous signers intact
which isn't correct since gpg will report:
gpg: number of one-pass packets does not match number of signature
packets
gpg: can't handle this ambiguous signature data
during verify. So when this happens append the valid signatures to the
.invalid_signers list with .reason set to GPG_ERR_GENERAL.
--
The --no-sk-comments flag is (or should be) a no-op in modern versions
of gnupg, but gpgme should still use its full form rather than the
(slightly) abbreviated --no-sk-comment
* src/engine-gpgsm.c (status_handler):
* src/engine-uiserver.c (status_handler):
--
After a realloc (realloc is also used for initial alloc) the allocated
size if the buffer is not correctly recorded. Thus an overflow can be
introduced by receiving data with different line lengths in a specific
order. This is not easy exploitable because libassuan constructs the
line. However a crash has been reported and thus it might be possible
to constructs an exploit.
CVE-id: CVE-2014-3564
Reported-by: Tomáš Trnka
* src/gpgme.h.in (GPGME_KEYLIST_MODE_WITH_SECRET): New.
* src/engine-gpg.c (gpg_keylist_build_options): Handle new mode.
* src/engine-gpgsm.c (gpgsm_keylist, gpgsm_keylist_ext): Ditto.
* src/keylist.c (parse_sec_field15): Add arg key and take care of
--with-secret output.
* src/gpgme-tool.c (gt_get_keylist_mode, cmd_keylist_mode): Add
"with_secret". Print card info and and secret flag for subkeys.
--
Note: This mode may only be used with GnuPG >= 2.1.
* src/gpgme.h.in (struct _gpgme_subkey): Add field CURVE.
* src/key.c (gpgme_key_unref): Free CURVE.
* src/keylist.c (keylist_colon_handler): Set CURVE.
* src/gpgme.c (gpgme_release): For failsafe reasons reset engine and
engine info after freeing.
--
The engine hack is useful in case the other release functions
accidently call engine release.
* src/engine-spawn.c (engspawn_start): Allocate space for list
terminator.
* src/posix-util.c (walk_path): Fix trailing slash detection.
--
Kudos to Valgrind for pointing out these two problems.
The first is a plain allocation bug in a code pattern I have written
thousands of times - this time it went wrong. The allocation is not
user controlled thus not directly exploitable.
The second is missed to do what it intended to do. Found due to the
access of malloced but not initialized memory. Not using calloc
again proved to be helpful to detect logical error.
* src/w32-io.c (create_writer): Free CTX in cased of bad FD.
* src/w32-util.c (_gpgme_mkstemp): Free TMPNAME in case of a failed
mkstemp.
--
Found by Hans-Christoph Steiner with cppcheck.
* src/spawn.c (gpgme_op_spawn_start, gpgme_op_spawn): Pass FLAGS dow
to spawn_start and add FLAGS args along the call path.
* src/engine-spawn.c (engspawn_start): Hack to automagically provide
argv[0].
* src/posix-io.c (_gpgme_io_spawn): dup /dev/null also to unsued
stdout.
--
Better be sure that stdout of a spawned process is connected to stdout
so that the process does not run into a write error if it writes to
stdout. AFAICS we always use a connected stdout; thus this is only
for correctness.
* configure.ac: Add option --enable-fixed-path.
(FIXED_SEARCH_PATH): New ac_define.
* src/posix-util.c (walk_path): Make use of the option. Remove
current directory from fallback PATH.
--
Note that using this option PATH is entirely ignored by GPGME and only
the given value is used instead to locate the GnuPG binaries.
On Android the use of PATH is not desirable. Instead the GnuPG tools
are expected in a fixed directory. By using
./configure --enable-fixed-path="/foo/bar"
gpg et al are expected to be installed as /foo/bar/gpg. With
./configure --enable-fixed-path="/foo/bar:/bin"
gpg is expected as /foo/bar/gpg or /bin/gpg.
* src/dirinfo.c (WANT_GPG_ONE_MODE): New.
(struct dirinfo): Add field "gpg_one_mode".
(get_gpgconf_item): Set that field and return it if requested.
(_gpgme_in_gpg_one_mode): New.
* src/engine-gpg.c (build_argv): Check GPG_AGENT_INFO only in gpg-1
mode.
* src/dirinfo.c (_gpgme_get_basename): New.
* src/engine-g13.c (g13_new): Take argv[0] from the pgmname.
* src/engine-gpgsm.c (gpgsm_new): Ditto.
* src/engine-gpg.c (build_argv): Ditto. Add arg PGMNAME.
(start): Pass PGMNAME to buildargv.
* src/gpgme.c (gpgme_set_global_flag): Add names "disable-gpgconf",
"gpgconf-name", and "gpg-name".
* src/dirinfo.c (_gpgme_dirinfo_disable_gpgconf): New.
(get_gpgconf_item): Minor debug info change.
* src/posix-util.c (default_gpg_name, default_gpgconf_name): Add vars.
(_gpgme_set_default_gpg_name): New.
(_gpgme_set_default_gpgconf_name): New.
(_gpgme_get_gpg_path, _gpgme_get_gpgconf_path): Use new vars.
(walk_path): Add debug output on failure.
* src/w32-util.c (default_gpg_name, default_gpgconf_name): Add vars.
(replace_slashes): New.
(get_basename): New.
(_gpgme_set_default_gpg_name): New.
(_gpgme_set_default_gpgconf_name): New.
(_gpgme_get_gpg_path, _gpgme_get_gpgconf_path): Use new vars.
* tests/t-engine-info.c (main): Add --verbose and --set-global-flag
options.
--
Note that the Windows part has not been tested.
* configure.ac (NEED_GPG_VERSION, NEED_GPGSM_VERSION)
(NEED_G13_VERSION, NEED_GPGCONF_VERSION): Remove vars and all related
checks. Do not check for any engine version.
(HAVE_ASSUAN): Remove AM conditional.
* src/Makefile.am: Remove separate component vars and always build all
engines but uiserver.
* src/dirinfo.c (WANT_GPGCONF_NAME): New.
(struct dirinfo): Add field gpgconf_name.
(_gpgme_get_default_gpgconf_name): Use WANT_GPGCONF_NAME.
(get_gpgconf_item): Set gpgconf name and adjust for _gpgme_get_*_path
now returning a malloced string.
* src/engine.c (engine_ops): Always init all engines except for
uiserver.
* src/posix-util.c (_gpgme_get_gpgsm_path, _gpgme_get_g13_path):
Remove unused functions.
(walk_path): New.
(_gpgme_get_gpg_path, _gpgme_get_gpgconf_path ): Re-implement using
walk_path.
* src/w32-util.c (_gpgme_get_gpgsm_path, _gpgme_get_g13_path): Remove
unused functions.
(_gpgme_get_gpg_path, _gpgme_get_gpgconf_path): Return a malloced
string.
* src/engine-g13.c (g13_get_req_version): Use a hardwired string with
the required version. This info belongs into this file.
* src/engine-gpg.c (gpg_get_req_version): Ditto.
* src/engine-gpgconf.c (gpgconf_get_req_version): Ditto.
* src/engine-gpgsm.c (gpgsm_get_req_version): Ditto.
* tests/t-engine-info.c: Replace now useless test by an info output.
* tests/gpg/Makefile.am (GPG, GPG_AGENT): Hardwire gpg and gpg-agent.
* tests/gpgsm/Makefile.am (GPGSM): Hardwire gpgsm.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (gpgme_data_type_t): New.
(gpgme_data_identify): New prototype.
* src/data-identify.c: New.
* src/parsetlv.c, src/parsetlv.h: New. Take from gpa.
* src/libgpgme.vers, src/gpgme.def: Add gpgme_data_identify.
* src/gpgme-tool.c (status): Add STATUS_IDENTIFY_RESULT.
(gt_identify): New.
(cmd_identify): New.
(hlp_passwd): Move close to cmd_passwd.
--
It is often useful to have a way to identify the data which needs
processing. This is such a common task that it makes sense to
implement this in gpgme to avoid diverging implementations.
* src/util.h: Move some prototypes to ...
* src/sys-util.h: New.
* src/Makefile.am (main_sources): Add sys-util.h.
* configure.ac (AH_VERBATIM): Add DIRSEP_C and DIRSEP_S.
* src/dirinfo.c: Include sys-util.h.
(WANT_GPG_NAME, WANT_GPGSM_NAME, WANT_G13_NAME)
(WANT_UISRV_SOCKET): New.
(dirinfo): Add corresponding fields.
(parse_output): Add arg COMPONENTS and set new fields.
(read_gpgconf_dirs): Add arg components and act upon it.
(get_gpgconf_item): Call read_gpgconf_dirs two times. Add debug
output.
(_gpgme_get_default_gpg_name): New.
(_gpgme_get_default_gpgsm_name): New.
(_gpgme_get_default_g13_name): New.
(_gpgme_get_default_gpgconf_name): New.
(_gpgme_get_default_uisrv_socket): New.
* src/engine-gpg.c, src/engine-g13.c, src/engine-gpgconf.c
* src/engine-gpgsm.c, src/engine-uiserver.c: Change to use
_gpgme_get_default_ instead of those from sys-util.h.
* src/posix-util.c (_gpgme_get_gpg_path): Include sys-util.h.
(_gpgme_get_uiserver_socket_path): Remove.
* src/w32-util.c (_gpgme_get_gpg_path): Include sys-util.h.
(_gpgme_get_uiserver_socket_path): Remove.
--
The default engines names are now taken from the output of gpgconf.
If gpgconf is not installed gpg 1 is assumed and locate the same was
as gpgconf.
* src/gpgme.h.in: Move gpgme_sssize_t and gpgme_off_t typedefs into
the extern "C" scope.
--
Frankly, this does not help very much because g++ still does not
interpret gpgme_data_seek_cb_t as compatible with the C++ ssize_t. I
am sorry for that API change but C and C++ are too different to always
get both of them under one umbrella. However, the ABI should now be
identical to older gpgme versions.
* configure.ac (NEED__FILE_OFFSET_BITS): Change to define gpgme_off_t
and gpgme_ssize_t.
(API__OFF_T, API__SSIZE_T): New ac_subst.
* src/gpgme.h.in: Replace all ssize_t and off_t by ac_subst macros.
* src/assuan-support.c, src/ath-pthread.c, src/ath.c, src/ath.h
* src/data-compat.c, src/data-fd.c, src/data-mem.c, src/data-stream.c
* src/data-user.c, src/data.c, src/data.h, src/engine-gpgsm.c
* src/engine-uiserver.c, src/gpgme-tool.c, src/gpgme.c: Replace off_t
by gpgme_off_t and sszie_t by gpgme_ssize_t.
* src/ath-pthread.c, src/ath.h: Include gpgme.h.
--
For a detailed description, see the gpgme.texi diff.
* src/w32-io.c (reader_context_s, create_reader)
(writer_context_s, create_writer): Rename STOPPED to CLOSE_EV.
(reader, writer): Remove setting of STOPPED. Wait for CLOSE_EV and
then release the context.
(destroy_reader, destroy_writer): Do not wait but set the CLOSE_EV.
(kill_reader, kill_writer): Remove.
(_gpgme_io_close): Add code from kill_reader and kill_writer.
--
The old code was prone to deadlocks which were actually exhibited at
Kleopatra startup. The new code is much more straightforward and
easier to understand. The reason for the complex old code was
probably due to our former idea to allow re-use of the I/O threads.
However we have long given up on this.
* configure.ac (INSERT__TYPEDEFS_FOR_GPGME_H): Add hacks for 32 bit
mingw64.
* src/util.h [W32]: Include winsock2.h before windows to make mingw64
happy.
* src/w32-util.c (_WIN32_IE): Need to use 5.1 for mingw64.
--
It is not clear to me what mingw64 wants to achieve with their POSIX
hacks. In particular the off64_t stuff looks quite strange given that
Windows has a pretty stable API for close to 2 decades. Thus I can't
say whether it will really work when build with that toolchain.
* configure.ac: Rename my_foo variables to mym4_foo variables to make
clear that they are processed by m4.
(VERSION_NUMBER): New ac_subst.
(AH_BOTTOM): Add CRIGHTBLURB macro.
(BUILD_REVISION, BUILD_FILEVERSION, BUILD_TIMESTAMP): Change them to
work similar to libgpg-error et al.
* src/versioninfo.rc.in: Remove use of BUILD_NUMBER and get it in line
with gpg-error et al.
* src/version.c (cright_blurb): New.
(gpgme_check_version_internal): Add magic to display the above
information.
* tests/t-version.c (main): Add option --verbose.
* src/gpgme.c (gpgme_set_pinentry_mode): New.
* src/gpgme.h.in (gpgme_pinentry_t): New.
(gpgme_set_pinentry_mode): New.
* src/context.h (struct gpgme_context): Add field pinentry_mode.
* src/engine-backend.h (struct engine_ops): Add field
set_pinentry_mode.
* src/engine-gpg.c (struct engine_gpg): Add field pinentry_mode.
(build_argv): Implement pinentry_mode.
(gpg_set_pinentry_mode): New.
(_gpgme_engine_ops_gpg): Register gpg_set_pinentry_mode.
--
Note that this new fucntion may only be used with gpg 2.1.
* src/gpgme.c (gpgme_io_read): New.
--
This is a writen style variant for gpgme_io_write. It is often easier
to use this one in passphrase and edit callbacks.
* src/conversion.c (D_gpgme_encode_percent_string): Remove stray
semicolon. Reported by Xi Wang.
--
Obviously this function is not used with a supplied LEN argument != 0.
* configure.ac: Define macro and conditional HAVE_ANDROID_SYSTEM.
* m4/gnupg-ttyname.m4: Force use of replacement on Android.
* src/ttyname_r.c: Ditto.
--
Android's bionic lib has no working ttyname_r() nor ttyname(). Using
them anyway will print
FIX ME! implement ttyname_r() bionic/libc/bionic/stubs.c:466
Thus we force the use of our replacement code which simply return
"/dev/tty".
* src/debug.h: Include "gpgme.h"
(_gpgme_trace_gpgme_error): New.
(trace_gpg_error): New macro. Use it in all files where we return
GPG_ERR_INV_ENGINE; also "include debug.h" as needed.
--
This is a pretty common error code but often it is hard to figure out
the actual cause. With debug level 4 we now print the file name and
line number where this error code is generated by gpgme. Along with
the git revision printed in the first log lines, this should give us
an easier way to track down the problems related to this error code.
* src/gpgme-tool.c (clear_membuf, init_membuf, put_membuf)
(put_membuf_str, get_membuf, peek_membuf): Add membuf functions.
Take from GnuPG master's common/membuf.[ch] and patch for our use.
(result_xml_escape): Rewrite using new functions.
--
First counting, then allocating, and finally copying data is prone to
errors. We better use the membuf functions which make it much easier.
* src/gpgme-tool.c: Change license notice.
--
gpgme-tool.c is a standalone program, thus it makes no sense to keep
it under the LGPL. We already had the manual under GPLv3+.
[[PGP Signed Part:Undecided]]
src/gpgme-tool.c (result_xml_escape_replacement, result_xml_escape):
New.
(result_xml_tag_data): Use result_xml_escape() to escape data.
(result_add_error): Use unescaped < and >.
--
This is a general solution for generating valid XML, but the specific
output that inspired the change was from the KEYLIST command:
<uid>William Trevor King <wking@tremily.us></uid>
Now the uids are properly escaped:
<uid>William Trevor King <wking@tremily.us></uid>
Signed-off-by: W. Trevor King <wking@tremily.us>
[[PGP Signed Part:Undecided]]
src/gpgme-tool.c (cmd_keylist): Use <chain-id> instead of <chain_id>.
--
All the other tags map struct attribute underscores to hyphens, so
fixing <chain_id> follows the priciple of least surprise.
Signed-off-by: W. Trevor King <wking@tremily.us>
src/gpgme-tool.c (cmd_keylist): Convert output from a list of
to more detailed XML.
(xml_preamble1, xml_preamble2, xml_end): Make global.
(result_add_protocol, result_add_validity): New functions for
generating XML from GPGME types.
(result_add_string): Treat NULL strings as "".
(result_xml_tag_data): Make 'data' a 'const char' so we can use the
value returned by gpgme_get_protocol_name directly.
--
This is a first pass at returning most of the gpgme_key_t data from the
KEYLIST call.
Signed-off-by: W. Trevor King <wking@tremily.us>
* src/gpgme-tool.c (server_reset_fds): Use close/CloseHandle instead
of the assuan close functions.
(_cmd_decrypt_verify, _cmd_sign_encrypt, cmd_verify, cmd_import)
(cmd_export, cmd_genkey, cmd_getauditlog): Use SERVER object instead
of assuan_get_*_fd functions.
--
Although we used our own handlers for INPUT and OUTPUT, we still used
assuan_get_input_fd, assuan_get_output_fd and their close functions.
That clearly can't work because libassuan does not have any values for
them.
* src/gpgme.c (gpgme_set_global_flag): New.
* src/gpgme.h.in (gpgme_set_global_flag): New.
* src/gpgme.def, src/libgpgme.vers: Add new public function.
* src/debug.c (envvar_override): New.:
(_gpgme_debug_set_debug_envvar): New.
(debug_init): Take ENVVAR_OVERRIDE in account.
--
On Android envvars can't be used, thus we need another way to enable
GPGME debugging. The new function allows this and may be used in the
future to implement similar things.
* src/engine-uiserver.c: Remove status-table.h which is not anymore
built. Fixes bug#1412.
--
The file was actually removed from the code by 885243e0 but for
unknown reasons the missing file was not reported by "make distcheck".
* src/engine-gpgconf.c (arg_to_data): Allow for NULL as value.string.
--
I was not able to replicate the problem. However this patch makes the
code more robust and tolerates errors by the user. IT should fix the
problem at hand.
* src/verify.c (gpgme_op_verify_result): Update summary field.
--
This is actually a hack to solve the problem that GPGME currently does
not emit ERRSIG for a missing public key.
