* NEWS: Update.
* doc/gpgme.texi (gpgme_op_createkey): Clarify the meaning of the
'expire' parameter.
(GPGME_CREATE_NOEXPIRE): Document new flag.
(gpgme_op_createsubkey): Clarify the meaning of the 'expire'
parameter.
* src/engine-gpg.c (gpg_add_algo_usage_expire): Fix handling of the
expiration time.
* src/gpgme.h.in (GPGME_CREATE_NOEXPIRE): New macro.
--
Previously, the documentation stated that the expiration time was an
absolute timestamp. However, this value was passed using the
'seconds=N' syntax to GnuPG which specifies the expiration time in
seconds relative to the creation time. Fix the documentation.
Furthermore, the documentation stated that using 0 results in keys
that do not expire. This was communicated to GnuPG by using the
implicit default. However, as of GnuPG 2.1.17, the default was
changed to create keys that expire within a reasonable timespan.
Fix this discrepancy by aligning the behavior with recent GnuPG
versions: 0 means use a reasonable default, and introduce a flag that
can be used to create keys that do not expire. Communicate this
explicitly to GnuPG.
Signed-off-by: Justus Winter <justus@g10code.com>
--
While educating students we can also get them to use useful habits, in
particular to parenthese bit tests.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpgme.texi (gpgme_sigsum_t summary): Clarify what "you
can check one bit means"
--
It was unclear which bit to test for is. And tests
with students have shown that they would "test" for
this one bit by using if(sig.summary == GPGME_SIGSUM_VALID)
which would fail because valid sigs are also SIGSUM_GREEN.
So lets give an example for people not used to checking bits and
clarify through this example which bit is meant to be checked.
* src/engine-gpg.c (struct engine_gpg): New field
override_session_key.
(gpg_release): Free that field.
(gpg_decrypt): With gnupg 2.1.16 use --override-session-key-fd.
* tests/run-decrypt.c (main): Fix setting over the override key.
--
Note that this works only with gnupg 2.1.16 and later.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpgme.texi: Document requirements of verifying that it is OK to
use session_key.
* tests/run-decrypt.c: Ensure that we fail if we're unable to access
the session key, so that we do not violate the guidance above.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Changed the description
-@code{gpgme_set_ctx_flag (ctx, "export-session-key")} returns
-@code{GPG_ERR_NO_ERROR} or @code{gpgme_get_ctx_flag (ctx,
-"export-session-key")} returns @code{"1"}.
+@code{gpgme_set_ctx_flag (ctx, "export-session-key")} returns success
+or @code{gpgme_get_ctx_flag (ctx, "export-session-key")} returns true
+(non-empty string).
to get gpgme_get_ctx_flag for boolean values in sync with its own
description.
Note that I don't agree with the above suggestion but it does not
really harm to have it in the man page.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.c (gpgme_set_ctx_flag): Add flags "export-session-key" and
"override-session-key".
(gpgme_get_ctx_flag): Ditto.
(gpgme_set_export_session_keys): Remove.
(gpgme_get_export_session_keys): Remove.
* src/gpgme.def, src/libgpgme.vers: Remove them.
* src/context.h (struct gpgme_context): Add field
override_session_key.
* src/decrypt-verify.c (decrypt_verify_start): Pass
override_session_key value to the engine.
* src/decrypt.c (decrypt_start): Ditto.
* src/engine.c (_gpgme_engine_op_decrypt): Ditto.
(_gpgme_engine_op_decrypt_verify): Ditto.
* src/engine-backend.h (struct engine_ops): Extend DECRYPT and
DECRYPT_VERIFY_START with override_session_key.
* src/engine-uiserver.c (_uiserver_decrypt): Add stub arg
override_session_key.
(uiserver_decrypt): Ditto.
(uiserver_decrypt_verify): Ditto.
* src/engine-gpgsm.c (gpgsm_decrypt): Ditto.
* src/engine-gpg.c (gpg_decrypt): Add arg override_session_key and set
corresponding gpg option.
* tests/run-decrypt.c (print_result): Print the session key if
available.
(main): Add options --export-session-key and --override-session-key.
--
To keep the number of context manipulation functions at bay, this
patches removes the just added gpgme_set_export_session_keys and
gpgme_get_export_session_keys by flags for the generic context
function.
The patch also implements the --override-session-key feature.
GnuPG-bug-id: 2754
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (gpgme_get_ctx_flag): New.
* src/gpgme.c (gpgme_set_ctx_flag): Move down the file and add a trace
statement.
(gpgme_get_ctx_flag): New.
* src/gpgme.def, src/libgpgme.vers: Add new interface.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.c (gpgme_set_export_session_keys): New function.
(gpgme_get_export_session_keys): New function.
* src/gpgme.h.in (struct _gpgme_op_decrypt_result): Add session_key
member.
(gpgme_{set,get}_export_session_keys): Declare new functions.
* src/libgpgme.vers, src/gpgme.def: Export new functions in shared
object.
* src/engine.h: (_gpgme_engine_op_decrypt) Add export_session_key
parameter.
(_gpgme_engine_op_decrypt_verify): Add export_session_key parameter.
* src/engine-backend.h: (struct engine_ops): Change function
pointer declarations to match.
* src/context.h (struct gpgme_context): Add export_session_keys member.
* src/decrypt.c (release_op_data): Free result.session_key.
(_gpgme_decrypt_status_handler): Store a copy of the exported session
key.
(decrypt_start): Pass export_session_keys from the context.
* src/decrypt-verify.c (decrypt_verify_start): Pass
export_session_keys from context.
* src/engine.c (_gpgme_engine_op_decrypt): Pass through
export_session_key flag.
(_gpgme_engine_op_decrypt_verify): Pass through export_session_key
flag.
* src/engine-gpg.c (gpg_decrypt): If export_session_key is set, add
--export-session-key to argument list.
* src/engine-gpgsm.c (gpgsm_decrypt): Ignore export_session_key for
now, since gpgsm offers no such mechanism.
* src/engine-uiserver.c (_uiserver_decrypt): If export_session_key is
set, add --export-session-key flag to cmd.
* doc/gpgme.texi: Document new functions and session_key member of
decrypt_result_t.
* doc/uiserver.texi: Add --export-session-key flag to DECRYPT command.
--
gpg(1) documents session key export as useful for key escrow, and is
rightly dubious of that use case. However, session key export is also
useful in other use cases. Two examples from MUA development (where
this functionality would be specifically useful to me right now):
* If the MUA stores a local copy of the session key upon decrypting
the message, it can re-decrypt the message without expensive
asymmetric operations. When rendering a thread with dozens of
encrypted messages, this can represent a significant speedup.
* A user may have expired encryption-capable secret key material,
along with many messages encrypted to that material. If she stores
the session keys for those messages she wants to keep, she can
destroy her secret key material and make any messages she has
deleted completely unrecoverable, even to an attacker who gets her
remaining secret keys in the future.
This patchset makes a two specific implementation decisions that could
have gone in different ways. I welcome feedback on preferred outcomes.
0) session key representation: we currently represent the session key
as an opaque textual string, rather than trying to provide any
sort of in-memory structure. While it wouldn't be hard to parse
the data produced by gpg's --export-session-key, I chose to use
the opaque string rather than lock in a particular data format.
1) API/ABI: i've added a member to gpgme_op_decrypt_result_t. This
has the potential to cause an out-of-bound memory access if
someone uses code compiled against the newer verision, but linked
at runtime against an older version. I've attempted to limit that
risk by documenting that users must verify
gpgme_get_export_session_keys() before accessing this new struct
member -- this means that code expecting this capability will
require the symbol at link-time, and will refuse to link against
older versions.
Another approach to solving this problem would be to avoid
modifying gpgme_op_decrypt_result_t, and to introduce instead a
new function gpgme_op_session_key(), which could be called in the
same places as gpgme_op_decrypt_result(). Depending on the
representation of the session key, this might introduce new
memory-management burdens on the user of the library, and the
session key is certainly part of a decryption result, so it seemed
simpler to go with what i have here.
If anyone has strong preferences that these choices should be solved
in a different way, i'm happy to hear them.
Additionally, I note that i'm also still pretty unclear about how the
"UI Server" fits into this whole ecosystem. In particular, I don't
know whether it's kosher to just add an --export-session-key flag to
the DECRYPT operation without actually having implemented it anywhere,
but i don't see where i would actually implement it either :/
If this patch (or some variant) is adopted, i will supply another
patch that permits offering a session key during decryption (e.g. "gpg
--override-session-key"), but I wanted to get these implementation
choices ironed out first.
Gnupg-Bug-Id: 2754
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
On the concern of adding a new field to a structure: It may not be
clearly documented but we don't expect that a user ever allocates such
a structure - those result structure may only be created bu gpgme and
are read-only for the user. Adding a new member constitutes a
compatible ABI change and thus an older SO may not be used by code
compiled with a header for the newer API. Unless someone tinkers with
the build system, this should never happen. We have added new fields
to result structure may times and I can't remember any problems.
- wk
* doc/gpgme.texi: Documentationabout gpgme_op_decrypt_verify_start was
stored under the name gpgme_op_decrypt_verify instead.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* configure.ac: Require libgpg-error 1.17. No longer
check for pthread.
* doc/gpgme.texi: Document removed neccessity for thread
safe gpgme flavours.
* src/sema.h (DEFINE_GLOBAL_LOCK),
(DEFINE_STATIC_LOCK, INIT_LOCK, DECLARE_LOCK)
(DESTROY_LOCK, LOCK, UNLOCK): Change to gpgrt equivalents.
* src/posix-sema.c, src/w32-sema.c: Removed.
* src/Makefile.am: Remove libpthread and
Update accordingly.
* src/ath.c, src/ath.h (ath_mutex_init)
(ath_mutex_destroy, ath_mutex_lock, ath_mutex_unlock): Removed.
* src/ath.h (ATH_MUTEX_INITIALIZER): Removed.
* src/version.c (do_subsystem_inits): sema_subsystem_init is
no longer required.
* tests/gpg/Makefile.am: Add new threading tests.
(t_thread1_LDADD, t_cancel_LDADD):
Use just gpgme.
* tests/gpg/t-thread-keylist-verify.c,
tests/gpg/t-thread-keylist.c: New.
* src/gpgme-config.in: Use -lgpgme for thread-model pthread.
--
Using gpgrt locks instead of pthread locks removes
the neccessity to link pthread directly to gpgme and
have a different, thread safe flavor of gpgme. Now
gpgme is thread-safe if the conditions mentioned
in the doc are met.
As the cpp bindings linked against libgpgme
and not libgpgme-pthread this fixes threading problems
with them.
libgpgme-pthread is removed but gpgme-config still supports
--thread=pthread for compatibility with find scripts.
* THANKS, doc/ChangeLog-2011, tests/ChangeLog-2011,
tests/gpg/geheim.txt: convert from iso 8859-1 to utf-8.
* lang/qt/src/dataprovider.cpp, lang/qt/src/qgpgmerefreshkeysjob.cpp,
lang/qt/src/qgpgmesecretkeyexportjob.cpp: replace U+FFFD REPLACEMENT
CHARACTER with proper U+00E4 LATIN SMALL LETTER A WITH DIAERESIS.
--
Note that src/versioninfo.rc.in is still ISO-8859-1. I don't know
whether Windows will properly handle UTF-8 in this file or not, so i
have not touched it.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* src/status-table.c (_gpgme_status_to_string): Return "" for EOF.
* src/engine-gpg.c (read_status): Ditto. The old code accidently used
GPGME_STATUS_EOF which is the integer 0 and neiteyr NULL nor a string.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (gpgme_interact_cb_t): New.
(GPGME_INTERACT_CARD): New.
(gpgme_op_interact_start, gpgme_op_interact): New.
* src/libgpgme.vers, src/gpgme.def: Add new functions.
* src/edit.c (op_data_t): Rename fnc to fnc_old and change users. Add
fnc.
(edit_status_handler): Call old or new callback.
(command_handler): Ditto.
(interact_start): New.
(gpgme_op_interact_start, gpgme_op_interact_start): New.
* src/status-table.c (_gpgme_status_to_string): New.
* tests/gpg/t-edit.c (edit_fnc): Rename to interact_fnc and change
type of STATUS. Use gpgme_io_writen.
(main): s/gpgme_op_edit/gpgme_op_interact/.
--
This change will eventually allow us to remove all those status codes
from gpgme.h.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/edit.c (command_handler): Handle special error code.
* src/engine-gpg.c (read_status): Ditto.
* src/engine-gpgsm.c (status_handler): Ditto.
* src/engine-uiserver.c (status_handler): Ditto.
* src/util.h (GPG_ERR_FALSE): Define for older libgpg-error versions.
--
An edit callback may now simply return GPG_ERR_FALSE to indicate that
it did not handled the status code. GPGME will the do the appropriate
action, which is to send an empty line.
Note that it is highly unlikely that GPG_ERR_FALSE has ever been used
by an application as return value from an edit interactor.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (struct _gpgme_signature): Remove field 'tofu'. Add
field 'key'.
(struct _gpgme_key): Add field 'fpr'.
(struct _gpgme_user_id): Add field 'tofu'.
(struct _gpgme_tofu_info): Remove fields 'address' and 'fpr'.
* src/key.c (gpgme_key_unref): Release TOFU and FPR.
* src/keylist.c (keylist_colon_handler): Store the fingerprint of the
first subkey also in KEY.
* src/verify.c (release_tofu_info): Remove.
(release_op_data): Release KEY.
(parse_tofu_user): Rewrite for new data structure.
(parse_tofu_stats): Ditto.
(parse_tofu_stats_long): Ditto.
* tests/run-verify.c (print_result): Ditto.
* tests/run-keylist.c (main): Print more fields.
--
TOFU information are now associated with the user ID and not with a
separate object.
Note that this breaks code relying on the former non-released TOFU
feature. The C++ bindings won't work right now.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/engine-gpg.c: Include data.h.
(add_input_size_hint): New.
(gpg_decrypt, gpg_encrypt, gpg_encrypt_sign, gpg_sign)
(gpg_verify): Call new function,
* tests/run-encrypt.c (status_cb): Print to stderr.
(progress_cb): New.o
(main): Add option --progress. Print full-status lines. Provide a
size for the input data.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (CC_FOR_BUILD): New.
* doc/mkdefsinc.c: New. Taken from GnuPG and modified for gpgme.
* doc/Makefile.am (EXTRA_DIST): Add defsincdate and mkdefsinc.c
(BUILT_SOURCES): new.
(gpgme.texi): New dependency.
(mkdefsinc, defsincdate, defs.inc): New rules.
(dist-hook): New.
* doc/gpgme.texi: Include defs.inc. Remove version.texi.
--
GnuPG-bug-id: 2352
That new system should also yield more approriate date infos for the
manual.
* src/gpgme.h.in (gpgme_encrypt_flags_t): New flag
GPGME_ENCRYPT_SYMMETRIC.
* src/engine-gpg.c (gpg_encrypt): Also add --symmetric if the flag
is given.
* NEWS: Mention new flag.
* tests/run-encrypt.c (show_usage): Extend for --symmetric.
(main): Handle --symmetric.
(main): Set passphrase_cb in loopback mode.
(main): Fix encrypt call if no recipients are given.
* tests/gpg/t-encrypt-mixed.c: New.
* tests/gpg/Makefile.am (c_tests): Add new test.
* doc/gpgme.texi: Document new flag.
* src/gpgme.h.in (GPGME_DATA_ENCODING_MIME): New.
* src/data.c (gpgme_data_set_encoding): Adjust check.
* src/engine-gpg.c (have_gpg_version): New.
(gpg_encrypt, gpg_encrypt_sign): Pass flag '--mimemode'.
(gpg_sign): Ditto.
* lang/cpp/src/data.h (GpgME): Add MimeEncoding.
* lang/cpp/src/data.cpp (encoding, setEncoding): Support MimeEncoding.
* src/gpgme-tool.c (server_data_encoding): Add flag --mime.
--
This feature allows an application to declare that the encrypted or
signed data is a valid MIME part.
What is missing is a way to return that information to the application
after decryption/verification. This can be done by setting the
encoding of the output data object; however this requires some
internal additions to our processing model.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpgme.texi (Passphrase Callback): Document as context
attribute.
(gpgme_set_passphrase_cb): Note that this requires LOOPBACK mode
with GnuPG 2.1.
* src/gpgme.h.in (gpgme_set_ctx_flag): New prototype.
* src/gpgme.c (gpgme_set_ctx_flag): New.
* src/gpgme.def, src/libgpgme.vers: Add new function.
* src/context.h (struct gpgme_context): Add FULL_STATUS.
* src/decrypt.c (_gpgme_decrypt_status_handler): Do not call the
status callback if FULL_STATUS is set.
* src/genkey.c (genkey_status_handler): Ditto.
* src/passphrase.c (_gpgme_passphrase_status_handler): Ditto.
* src/sign.c (_gpgme_sign_status_handler): Ditto.
* src/engine-backend.h (struct engine_ops): Add SET_STATUS_CB and add
adjust all definitions of that variable.
* src/engine.c (_gpgme_engine_set_status_cb): New.
* src/op-support.c (_gpgme_op_reset): Call this function.
* src/engine-gpg.c (struct engine_gpg): Add fields MON_CB and
MON_CB_VALUE.
(gpg_set_status_cb): New.
(_gpgme_engine_ops_gpg): Register that function.
(read_status): Call the monitor callback.
* src/engine-gpgsm.c (struct engine_gpgsm): Add fields MON_CB and
MON_CB_VALUE.
(_gpgme_engine_ops_gpgsm): Register that function.
(gpgsm_assuan_simple_command): Change first arg to be an engine
context and adjust call callers. Call the monitor callback.
* src/engine-uiserver.c (struct engine_uiserver): Add fields MON_CB
and MON_CB_VALUE.
(_gpgme_engine_ops_uiserver): Register that function.
(uiserver_assuan_simple_command): Change first arg to be an engine
context and adjust call callers. Call the monitor callback.
* tests/run-verify.c (status_cb): New.
(print_result): Print algo names.
(main): Add option --status.
--
This new feature is mainly intended for bug tracking. Having access
to the raw status lines might also be useful for applications, though.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.c (gpgme_set_global_flag): Add flag "w32-inst-dir";
* src/posix-util.c (_gpgme_set_override_inst_dir): New stub.
* src/w32-util.c (override_inst_dir): New var.
(_gpgme_get_inst_dir): Return this var is set.
(_gpgme_set_override_inst_dir): New.
--
See
https://lists.gnupg.org/pipermail/gnupg-devel/2015-September/030267.html
for background.
Signed-off-by: Werner Koch <wk@gnupg.org>
