* src/gpgme.h.in (GPGME_SIG_MODE_FILE): New signature mode flag.
* src/engine-gpg.c (gpg_sign): Separate signature mode from additional
flags. Check for incompatible flags. Explicitly set output to stdout if
no output file is used. Pass filename instead of fd to gpg when new flag
is set.
* src/engine-gpgsm.c (gpgsm_sign): Return error if new flag is set.
* src/engine-uiserver.c (uiserver_sign): Ditto.
* src/sign.c (sign_start): Consider new flag on check for invalid flags.
* tests/run-sign.c (show_usage): New options --detach and
--direct-file-io.
(main): Parse new options. Create a detached signature if --detach is
given. Make gpg read the input file itself if --direct-file-io is given.
--
With this change the gpgme_op_sign* functions gain the possibility to
make gpg read the data to sign directly from a file instead of from an
input FD to which it is written by gpgme.
GnuPG-bug-id: 6550
* src/gpgme.h.in (GPGME_ENCRYPT_FILE): New encryption flag.
* src/engine-gpg.c (gpg_encrypt, gpg_encrypt_sign): Check for
incompatible flags. Pass filename instead of fd to gpg when new flag is
set.
* src/engine-gpgsm.c (gpgsm_encrypt): Return error if new flag is set.
* src/engine-uiserver.c (uiserver_encrypt): Ditto.
* tests/run-encrypt.c (show_usage): New option --direct-file-io.
(main): Parse new option. Make gpg read the input file itself if the
option is given.
--
With this change the gpgme_op_encrypt* and gpgme_op_encrypt_sign*
functions gain the possibility to make gpg read the data to (sign and)
encrypt directly from a file instead of from an input FD to which it is
written by gpgme.
GnuPG-bug-id: 6550
* src/gpgme.h.in (GPGME_KEYLIST_MODE_WITH_V5FPR): New.
(struct _gpgme_subkey): Add field v5fpr.
* src/engine-gpg.c (gpg_keylist_build_options): Pass new option to
gpg.
* src/key.c (gpgme_key_unref): Free new field.
* src/keylist.c (op_data_t): Parse and add "fp2" line.
* tests/run-keylist.c (show_usage): Add option --v5fpr.
* src/keylist.c (op_data_t): Add field failure_code.
(keylist_status_handler): Handle special value.
(gpgme_op_keylist_end): Return an error if a FAILURE line has been
seen.
--
Note that the failure code part has been added to better diagnose
problems if a wrong gpg version is used. If verything works right we
should not get this because we check that the gnupg version sis either
>= 2.4.4 or less than 2.3 and >= 2.2.42.
Note further that the v5fpr field may also be used to get the SHA-256
fingerprint of X.509 certificates (even without passing the new mode
flag).
GnuPG-bug-id: 6705
* src/engine-gpgsm.c (gpgsm_encrypt): Send the always-trust options.
* tests/run-encrypt.c: Add option --always-trust.
--
Note that the run-encrypt test tool used to assume always-trust for
OpenPGP since 1.7.0 This bug has also been fixed by introducing the
explicit option.
GnuPG-bug-id: 6559
* src/engine-gpg.c (add_file_name_arg_or_data): New.
(gpg_decrypt): Use add_file_name_arg_or_data instead of add_data for the
ciphertext.
(gpg_verify): Use add_file_name_arg_or_data instead of add_data for the
signature and the signed text.
* tests/run-decrypt.c (show_usage): New option --direct-file-io.
(main): Parse new option. If option is given, then don't open input
file, create simple data object instead of data object from stream and
set input file name on input data.
* tests/run-verify.c (show_usage): New option --direct-file-io.
(main): Parse new option. If option is given, then don't open input
files, create simple data objects instead of data objects from stream
and set input file names on input data objects.
--
This change makes it possible to tell gpg (and gpgtar) to read the
input (i.e. the signed/encrypted data or the signature or the created
archive) directly from the files with given file names instead of from
streams piped through GpgME's Data IO.
GnuPG-bug-id: 6530
* src/engine-gpg.c (gpg_encrypt): Pass output file name to gpg if output
has file name set.
(gpg_encrypt_sign): Ditto.
(gpg_sign): Ditto.
* tests/run-encrypt.c (show_usage): New option --output.
(main): Parse new option. Set file name on output if --output is given.
Do not print output if --output is given.
* tests/run-sign.c (show_usage): New option --output.
(main): Parse new option. Set file name on output if --output is given.
Do not print output if --output is given.
--
This change makes it possible to tell gpg (and gpgtar) to write the
output (i.e. the signed/encrypted data or the signature or the created
archive) directly to a file with given file name instead of piping
the output back to gpgme.
GnuPG-bug-id: 6530
* doc/gpgme.texi (GPG_ERR_FULLY_CANCELED): New.
* lang/cpp/src/context.cpp (Error::isCanceled): Also return true for
GPG_ERR_FULLY_CANCELED.
--
For internal purposes, GnuPG sometimes uses the error code
GPG_ERR_FULLY_CANCELED instead of GPG_ERR_CANCELED. From a user
perspective both values mean the same thing and should therefore be
treated identically.
GnuPG-bug-id: 6510
* src/debug.c (errfp): Remove.
(debug_init): Factor some code out to ...
(safe_to_use_debug_file): new.
(tid_log_callback): New.
(debug_init): Rewrite to make use of gpgrt logging.
(_gpgme_debug): Ditto.
(_gpgme_debug_end): Remove extra LF testing code.
* src/dirinfo.c (get_gpgconf_item): Remove now unneeded LFs. Realign
output.
* src/gpgme.h.in (GPGME_DECRYPT_ARCHIVE): New decryption flag.
* src/engine-gpg.c (gpg_decrypt): Set use_gpgtar engine flag if
GPGME_DECRYPT_ARCHIVE flag is set. Check for new enough gpg and
incompatible flags. Use add_gpg_arg_with_value for gpg-only options
with a value and add_gpg_arg for gpg-only options without a value.
Set extra options for gpgtar and pass input data to stdin when using
gpgtar.
* tests/run-decrypt.c (show_usage): New options --archive and
--directory.
(main): Parse new options. Decrypt with gpgtar if --archive is given.
Set file name of output data to value of --directory option.
--
GnuPG-bug-id: 6342
* src/engine-gpg.c (gpg_encrypt, gpg_encrypt_sign, gpg_sign): Pass
file name set in data with --directory option to gpgtar.
* tests/run-encrypt.c (show_usage): New option --directory.
(main): Parse new option. Set file name of input data to option value.
* tests/run-sign.c (show_usage): New option --directory.
(main): Parse new option. Set file name of input data to option value.
--
GnuPG-bug-id: 6342
* src/dirinfo.c (WANT_GPGTAR_NAME): New.
(dirinfo): Add field gpgtar_name.
(get_gpgconf_item): Build gpgtar_name on demand and return it.
(_gpgme_get_default_gpgtar_name) : New.
(gpgme_get_dirinfo): New value "gpgtar-name" for WHAT.
* src/util.h (_gpgme_get_default_gpgtar_name): New.
* tests/t-engine-info.c (main): Add gpgtar-name to the output.
GnuPG-bug-id: 6342
* src/context.h (gpgme_context): Add field no_auto_check_trustdb.
* src/gpgme.c (gpgme_set_ctx_flag, gpgme_get_ctx_flag): Add flag
"no-auto-check-trustdb".
* src/engine-gpg.c (engine_gpg): Add flags.no_auto_check_trustdb.
(gpg_set_engine_flags): Set the flag.
(build_argv): Pass option to gpg.
* tests/run-keylist.c (show_usage, main): Add option --no-trust-check.
--
This makes the --no-auto-check-trustdb option available in the GPGME API
to disable the potentially expensive automatic trust database check.
GnuPG-bug-id: 6261
* src/gpgme.c (gpgme_set_global_flag): Add flag "inst-type".
* src/w32-util.c (_gpgme_set_get_inst_type): New.
(INST_TYPE_GPG4WIN_DIR): New.
(INST_TYPE_GPGDESK_DIR): New.
(_gpgme_get_gpgconf_path): Implement this flag. Replace fixed strings
by the macros.
* src/posix-util.c (_gpgme_set_get_inst_type): New dummy.
--
This is intended for use by Kleopatra to reliable find the expected
GnuPG installation.
* src/sign.c (parse_sig_created): Special case the rfc4880 "1F" status.
--
This has always been wrong but we can't simply force strtol to assume
hex. Patch compiles but has received no specific test. For details
see
GnuPG-bug-id: 6223
* src/gpgme.h.in (GPGME_KEYLIST_MODE_FORCE_EXTERN): New.
(GPGME_KEYLIST_MODE_LOCATE_EXTERNAL): New.
* src/gpgme.c (gpgme_set_keylist_mode): Check for invalid mode.
* src/engine-gpg.c (gpg_keylist_build_options): Use
"--locate-external-keys" instead of "--locate-keys" if flag is set.
* src/gpgme-json.c (op_keylist): New flag "force-extern".
* src/gpgme-tool.c (gt_get_keylist_mode, cmd_keylist_mode): Handle
new mode.
--
GnuPG-bug-id: 5951
--
These lines were accidentally added with the documentation for
gpgme_op_setexpire. The actual documentation for gpgme_op_revuid_start
is a bit further down.
* src/gpgme.h.in (gpgme_op_receive_keys_start, gpgme_op_receive_keys):
New.
* src/gpgme.def, src/libgpgme.vers: Add them.
* src/engine-backend.h (struct engine_ops): Add arg keyids to field
'import'.
* src/engine.h, src/engine.c (_gpgme_engine_op_import): Add arg keyids.
* src/engine.c (_gpgme_engine_op_import): Forward new arg keyids.
* src/import.c: (_gpgme_op_import_start, _gpgme_op_import_keys_start):
Pass NULL to new arg of _gpgme_op_import_start.
(_gpgme_op_receive_keys_start, gpgme_op_receive_keys_start,
gpgme_op_receive_keys): New.
* src/engine-gpg.c (gpg_import): Add arg keyids. Extend check for
valid arguments. Build command line if keyids are given.
* src/engine-gpgsm.c (gpgsm_import): Add arg keyids. Return error if
keyids is not NULL.
tests/run-receive-keys.c: New.
tests/Makefile.am (noinst_PROGRAMS): Add new test runner.
--
The new function allows importing keys given by their key ids or
fingerprints from a keyserver (like gpg's --recv-keys command).
GnuPG-bug-id: 5808
* src/gpgme.h.in (GPGME_EXPORT_MODE_SECRET_SUBKEY): New.
* src/export.c (check_mode): Allow new mode and check for invalid
combinations.
(export_keys_start): Return error if new mode flag is set.
* src/engine-gpg.c (export_common): Implement.
* src/gpgme-tool.c (cmd_export): New option --secret-subkey.
* tests/run-export.c (main): New option --secret-subkey.
--
This adds support for exporting secret subkeys (via gpg's
--export-secret-subkeys) to gpgme_op_export[_ext][_start].
The flag is not supported by gpgme_op_export_keys[_start] because
there is no way to specify which subkey(s) to export with these
functions.
GnuPG-bug-id: 5757
* src/import.c (gpgme_op_import_result): Check fpr for NULL.
(parse_error): New.
(import_status_handler): Handle error status line.
* doc/gpgme.texi (gpgme_import_status_t): Mention that fpr can be NULL.
* tests/gpg/t-import.c (check_result): Check fpr for NULL.
* tests/run-threaded.c (delete_impres): Check fpr for NULL.
--
When importing an encrypted certificate a wrong passphrase may be
entered. In this case gpgsm emits a status line with a bad passphrase
error and an "invalid object" error. To make it possible for callers
to handle a wrong passphrase error more gracefully, an import status
with bad passphrase error is added to the import result for each
status line with bad passphrase error.
GnuPG-bug-id: 5713
* src/context.h (struct gpgme_context): New field import_filter.
* src/engine-backend.h (struct engine_ops): Add arg import_filter to
field 'import'.
* src/engine-gpg.c (gpg_import): Add arg import_filter and pass option
--import-filter with argument value to gpg. Adjust all callers.
* src/engine-gpgsm.c (gpgsm_import): Add dummy arg import_filter.
* src/gpgme.c (gpgme_release): Free 'import_filter'.
(gpgme_set_ctx_flag, gpgme_get_ctx_flag): New flag "import-filter".
* tests/run-import.c (main): Add option --import-filter.
--
This makes the --import-filter option available in the GPGME API for
key imports.
GnuPG-bug-id: 5739
* src/context.h (struct gpgme_context): New field key_origin.
* src/engine-backend.h (struct engine_ops): Add arg key_origin to
field 'import'.
* src/engine-gpg.c (gpg_import): Add arg key_origin and pass option
--key-origin with argument value to gpg. Adjust all callers.
* src/engine-gpgsm.c (gpgsm_import): Add dummy arg key_origin.
* src/gpgme.c (gpgme_release): Free 'key_origin'.
(gpgme_set_ctx_flag, gpgme_get_ctx_flag): New flag "key-origin".
* tests/run-import.c (main): Add option --key-origin.
* tests/gpg/t-import.c (main): Set and verify key origin.
--
This makes the --key-origin option available in the GPGME API for
key imports.
GnuPG-bug-id: 5733
* src/context.h (struct gpgme_context): Add 'cert_expire'.
* src/engine-gpg.c (append_args_from_cert_expire): New.
(gpg_edit): Set option according to the new flag.
* src/gpgme.c (gpgme_release): Free 'cert_expire'.
(gpgme_set_ctx_flag, gpgme_get_ctx_flag): Add "cert-expire".
* tests/gpg/Makefile.am (c_tests): Add new test.
(gpg.conf): Write "allow-weak-key-signatures" to gpg.conf.
* tests/gpg/t-edit-sign.c: New.
--
The new context flag "cert-expire" allows setting the expiration date
for key signatures created with gpgme_op_interact.
GnuPG-bug-id: 5336, 5505
* src/data.c (_gpgme_data_release): Free buffers.
(gpgme_data_seek): Adjust from renamed fields.
(gpgme_data_set_flag): Implement new flags.
(_gpgme_data_inbound_handler): Allow the use of a malloced buffer.
(_gpgme_data_outbound_handler): Ditto.
* src/data.h (BUFFER_SIZE): Move out of the struct definition.
(struct gpgme_data): Remove pending filed and introduce inbound and
outbound fields.
* src/conversion.c (_gpgme_wipememory): New. Taken from GnuPG.
* src/cJSON.c (wipememory): Use this here too.
* tests/run-decrypt.c (main): Add options "--large-buffers" and
"--sensitive".
--
GnuPG-bug-id: 5478
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (struct _gpgme_key_sig): Add fields 'trust_depth',
'trust_value', and 'trust_scope'.
* src/key.c (gpgme_key_unref): Free trust_scope.
* src/keylist.c (keylist_colon_handler): Set the fields.
* tests/run-keylist.c (main): Print the fields.
--
The trust signature values are part of gpg's output since the year 2003.
This now adds support to gpgme.
GnuPG-bug-id: 5245, 5419
* src/gpgme.h.in (gpgme_op_setexpire_start, gpgme_op_setexpire): New.
* src/libgpgme.vers, src/gpgme.def: Add new functions.
* src/genkey.c (setexpire): New.
(gpgme_op_setexpire_start, gpgme_op_setexpire): New.
* src/engine.h, src/engine.c: (_gpgme_engine_op_setexpire): New.
* src/engine-backend.h (engine_ops): Add 'setexpire' and adjust all
engine initializers.
* src/engine-gpg.c (gpg_setexpire): New.
(_gpgme_engine_ops_gpg): Set setexpire to gpg_setexpire.
* doc/gpgme.texi: Document new functions.
* tests/run-genkey.c: Add option --setexpire.
--
This extends GPGME to support the --quick-set-expire command
added by GnuPG 2.1.22. This allows changing subkeys expiry
date without going through the editinteractor interface.
Co-authored-by: Andre Heinecke <aheinecke@gnupg.org>
GnuPG-bug-id: 4999
* src/gpgme.h.in: Clarify that the trustlist function should not be
used.
* src/engine.c (_gpgme_engine_op_trustlist): Always return an error.
* src/engine-backend.h (struct engine_ops): Remove trustlist member.
* src/engine-gpg.c (gpg_trustlist): Remove.
(struct engine_ops): Remove that member. Also in all other engines.
* tests/gpg/t-trustlist.c: Remove.
* lang/python/tests/t-trustlist.py: Remove.
--
This never worked in reality because the required feature has been
removed from GnuPG version 1.3.2 soon after introduction of this
feature in gpgme - 17 years ago. It was anyway marked as
experimental. We keep the API and ABI, though.
GnuPG-bug-id: 4834
Signed-off-by: Werner Koch <wk@gnupg.org>
