* lang/python/gpgme.i: Added a genericrepr macro and use it for
gpgme_key, gpgme_subkey, and gpgme_key_sig.
--
To look nicer in Python's REPL.
We define a generic __repr__ as a SWIG macro and use that to extend some
defined SWIG objects.
The alternative would have been to write a custom __repr__ function for
each class but that would need to be changed everytime the object's
structure changes. The bindings should be easy to maintain, I guess.
This comes at the expense that the reprs are now relatively long and
contain, for example, both keyid and fingerprint.
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* lang/python/setup.py.in: Call SWIG without the builtin flag.
--
The SWIG documentation
<http://www.swig.org/Doc2.0/Python.html#Python_nn28> leaves the
impression that -builtin is solely for increasing performance:
New in SWIG version 2.0.4: The use of Python proxy classes has
performance implications that may be unacceptable for a high-
performance library. The new -builtin option instructs SWIG to
forego the use of proxy classes, and instead create wrapped types as
new built-in Python types. When this option is used, the following
section ("Proxy classes") does not apply. Details on the use of the
-builtin option are in the Built-in Types section.
While not wasting CPU cycles is good, it also prevents Python code being
written in the wrapper itself. That, however, may be useful to make it
easier to extend the wrapper.
Partially reverts: 856bcfe293
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* lang/python/gpgme.i (pygpgme_wrap_gpgme_data_t): Provide a "self"
variable for SWIG_NewPointerObj and call SWIG_NewPointerObj rather than
SWIG_Python_NewPointerObj.
--
SWIG_Python_NewPointerObj seems to be an implementation detail, because
SWIG's documentation does not mention that function at all. In fact,
SWIG_NewPointerObj is a call to SWIG_Python_NewPointerObj with the first
parameter being either NULL or the "self" variable, depending on whether
SWIG is called with the -builtin flag. So far, the first parameter was
hard-coded to NULL. This change also hard-codes it to NULL but makes
it more explicit. The benefit is that the documented function is being
used and that compilation works regardless of the -builtin flag.
Partially reverts: 856bcfe293
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* lang/python/setup.py.in: Only call with -py3 when we run under python3
or higher.
--
If we ever remove the -builtin flag and leave the the -py3 flag, SWIG
will generate Python code which will be incompatible with Python 2,
because the py3 flag generates python3 code which is incompatible with
python2.
So we conditionally generate SWIG bindings with -py3.
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* lang/python/Makefile.am (copystamp): Create one copy per Python
version.
(all-local): Adapt.
(clean-local): Likewise.
(install-exec-local): Likewise.
* lang/python/tests/run-tests.py: Likewise.
--
Currently, we use one copy of the Python module's source to build for
all Python versions. This is problematic, because SWIG writes a
wrapper file into the source tree. Currently, this file works with
both Python 2 and 3, but this is purely by chance.
Improve the situation by creating one copy per Python version so that
SWIG can write version-specific code into each copy.
Signed-off-by: Justus Winter <justus@g10code.com>
* configure.ac: On macOS, use the compatibility macros to expose every
feature of the libc. This is the equivalent of _GNU_SOURCE on GNU
libc.
--
Not defining this leads to compilation errors or superfluous warnings
on macOS.
GnuPG-bug-id: 2910
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/qt/src/qgpgmenewcryptoconfig.cpp,
lang/qt/src/threadedjobmixin.h: Include functional.
--
With GCC 7.0, functional is not included transitively and we get:
In file included from qgpgmedeletejob.h:39:0,
from qgpgmedeletejob.cpp:38:
threadedjobmixin.h:98:33: error: 'function' in namespace 'std'
does not name a template type
void setFunction(const std::function<T_result()> &function)
^~~~~~~~
std::{function,bind,placeholders,mem_fn} are defined in functional.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1417383
Signed-off-by: Igor Gnatenko <ignatenkobrain@fedoraproject.org>
GnuPG-Bug-Id: 2955
Commit Message amended by Andre Heinecke
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* src/verify.c (parse_tofu_user): For cleanness use gpg_error ...
(_gpgme_verify_status_handler): ... and gpg_err_code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/verify.c (op_data_t): Add conflict_user_seen.
(parse_tofu_user): Return ERR_DUP_VALUE for mutltiple TOFU_USERS.
(_gpgme_verify_status_handler): Handle ERR_DUP_VALUE from
parse_tofu_user to ignore the next TOFU_STATS.
--
This fixes TOFU Conflict verification with GnuPG-2.1.17 and 2.1.18
GnuPG-Bug-Id: 2914
* configure.ac (vasprintf): Remove check.
* src/vasprintf.c: Remove file.
* src/util.h (vasprintf, asprintf): Remove prototypes. Replace all
calls to vasprintf and asprintf by gpgrt_vasprintf or gpgrt_asprintf.
Also take care to use gpgrt_free on the returned value.
* src/w32-util.c (_gpgme_get_gpgconf_path): Replace a gpgrt_asprintf
by _gpgme_strconcat.
(snprintf): New macro to use gpgrt_snprintf instead of the system's
standard snprintf.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
It is common that developers look up only the header file and do not
read the manual. These comments should make it clear that most
structures in gpgme.h are read-only and may only be allocated by
gpgme.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (gpgme_data_rewind): Un-deprecate.
* src/data-compat.c (gpgme_data_rewind): Move to ...
* src/data.c (gpgme_data_rewind): here.
--
That function is very convenient because it is required a lot with
memory streams. It also documents the intention of the caller better
than gpgme_data_seek with its addition parameters and the need to map
system errors. Thus it does not make sense to make it a first class
citizen again.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/key.c (gpgme_key_unref): Always free address if set.
(_gpgme_key_append_name): Remove memory optimization for address.
--
The check if address is not allocated would now be more complicated
then just comparing it to email because email is set to address
also when an email was not parsed from the user id.
* src/key.c (_gpgme_key_append_name): Set email and remove name
for uid only keys.
--
If we have a name and no email but the name can be parsed as
an address we now treat the address as email and remove the name.
This fixes downstream users that rely on email to show email
addresses and don't expilicity handle this case.
E.g. A userid foo@example.com was:
uid->name = "foo@example.com"
uid->email = ""
uid->address = "foo@example.com"
It is now:
uid->name = ""
uid->email = "foo@example.com"
uid->address = "foo@example.com"
* lang/qt/tests/t-support.h (QSIGNALSPY_TIMEOUT): New macro.
* lang/qt/tests/t-encrypt.cpp: Use the new macro as timeout when
waiting for signals.
* lang/qt/tests/t-keylist.cpp: Likewise.
* lang/qt/tests/t-keylocate.cpp: Likewise.
* lang/qt/tests/t-ownertrust.cpp: Likewise.
* lang/qt/tests/t-wkspublish.cpp: Likewise.
--
Increase the timeout when waiting for signals from 5 seconds to 60.
This addresses intermittent test failures on slow machines.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpg/t-gpgconf.c (main): Reduce iterations to 10.
* tests/gpg/t-thread-keylist-verify.c,
tests/gpg/t-thread-keylist.c (THREAD_COUNT): Reduce to 10.
--
While these tests tested for race conditions a smaller number
of iteration should still show problems if they are run on
multiple systems and regulary. While the 100 Thread count in
the t-thread tests could lead to resource problems.
* lang/python/gpgme.i: Added gpgme_op_keylist_start with defaults
* lang/python/tests/t-keylist.py: Added tests for default parameters
--
To increase the ease of use, op_keylist_start
parameters default to sensible values.
The empty string matches all keys.
We assume that the user wants to retrieve public keys most of the time,
so we default to public keys rather than secret keys.
Signed-off-by: Tobias Mueller <muelli@cryptobitch.de>
* tests/start-stop-agent: Don't autostart agent on --stop and
running check. Use --debug-quick-random when starting.
--
This should speed up the tests especially on low entropy systems.
Possibly fixing a hang on pythons op_genkey test in the Launchpad
build enviorment (see launchpad issue 1655298)
* src/w32-io.c (writer): Only stop once the buffer is drained.
(destroy_writer): Wait for the writers buffer to be drained. This
aligns '_gpgme_io_close's behavior with close(2) and fclose(3).
GnuPG-bug-id: 2881
Signed-off-by: Justus Winter <justus@g10code.com>
* src/engine-gpgconf.c (gpgconf_write): Connect a pipe to the child's
stderr, and wait for it to be closed as an indication that gpgconf has
exited. Also improve error handling.
GnuPG-bug-id: 2881
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpg/t-gpgconf.c: Include support functions.
(fail_if_err): Remove macro.
(init_gpgme): Remove function.
(lookup): New function.
(main): Update some values and verify that the changes are applied.
* tests/gpg/t-support.h (test): New assert-like macro.
GnuPG-bug-id: 2881
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/qt/src/Makefile.am (qgpgme_sources): Add cryptoconfig.cpp
* lang/qt/src/cryptoconfig.cpp: New.
* lang/qt/src/cryptoconfig.h (CryptoConfigEntry::stringValueList):
New.
* lang/qt/src/qgpgmenewcryptoconfig.cpp
(QGpgMENewCryptoConfigEntry::stringValueList): New.
* lang/qt/src/qgpgmenewcryptoconfig.h: Update accordingly.
--
This is a pardigm change in cryptoconfig.h to avoid ABI breaks
with each new config value we support it now has an implementation
that is directly related to qgpgmenewcryptoconfig, which is now
the only one.
* lang/qt/tests/t-support.h (TestPassphraseProvider::getPassphrase):
Use gpgrt_asprintf instead of strdup.
--
To avoid problems on MacOS we want to avoid strdup so that
qgpgme can be built without extensions. But qstrdup allocates
with new and not with malloc, so use gpgrt_asprintf instead.
* configure.ac: Set HAVE_MACOS_SYSTEM conditional.
* lang/qt/src/Makefile.am,
lang/cpp/src/Makefile.am,
lang/qt/src/QGpgmeConfig.cmake.in.in,
lang/cpp/src/GpgmeConfig.cmake.in.in: Use libsuffix again to
distinguish between macos .dylib
--
GnuPG-Bug-Id: 2884
* lang/python/tests/run-tests.py: Add and honor a switch '--quiet'.
This way we can use this script to run Python tests one by one without
the noise, and the script will setup the necessary environment for us.
Signed-off-by: Justus Winter <justus@g10code.com>
