* tests/gpgsm/Makefile.am (check-local): Drop rule and the dependency
on it.
--
Previously, the test environment was created during 'make check'.
Nowadays we create it using 'BUILT_SOURCES' during 'make all'. Drop
remnant of the previous method.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/tests/Makefile.am: Kill all previously running daemons
before creating the private key store.
* lang/qt/tests/Makefile.am: Likewise.
* tests/gpg/Makefile.am: Likewise.
* tests/gpgsm/Makefile.am: Likewise.
--
Now that the daemons sockets are no longer created in the GNUPGHOME,
we cannot rely on cleaning the build directory to make sure they are
shut down. Therefore, we explicitly kill any running daemons when
creating the test environment.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/tests/Makefile.am: Create test environment as part of
'make all'.
* tests/gpg/Makefile.am: Make sure the private keystore is created
first.
* tests/gpgsm/Makefile.am: Create test environment as part of
'make all'. Make sure the private keystore is created
first.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpg/Makefile.am: Use BUILT_SOURCES instead of check-local
and initial.test.
* lang/qt/tests/Makefile.am: Ditto.
--
This fixes "make dist" failure when source tree is clean:
git clean -dxf
autoreconf -ivf
./configure
make dist
BUILT_SOURCES should be used when file as generated without explicit
dependency. The check-local is all-am dependency, this means that it
will be resolved also in "make dist".
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
* tests/gpg/Makefile.am (tests_unix): Add 't-thread-keylist' and
't-thread-keylist-verify'.
(c_tests): Drop them here.
--
The tests use pthreads and we suspect problems with MinGW's wrappers.
Signed-off-by: Justus Winter <justus@g10code.com>
* src/gpgme.h.in (GPGME_ENCRYPT_WRAP): New const.
(gpgme_decrypt_flags_t): New enum.
(GPGME_DECRYPT_VERIFY): New const
(GPGME_DECRYPT_UNWRAP): New const
(gpgme_op_decrypt_ext_start): New func.
(gpgme_op_decrypt_ext): New func.
* src/decrypt-verify.c (gpgme_op_decrypt_ext_start): New.
(gpgme_op_decrypt_ext): New.
(decrypt_verify_start): Add arg FLAGS. Replace call to
engine_op_decrypt_verify by the plain decrypt with the flag set.
(gpgme_op_decrypt_verify_start): Pass the flag.
(gpgme_op_decrypt_verify): Pass the flag.
* src/decrypt.c (decrypt_start): Rename to ...
(_gpgme_decrypt_start): this. Add arg FLAGS. Pass FLAGS to
engine_op_decrypt.
(gpgme_op_decrypt_start): Adjust for chnage pass 0 for FLAG.
(gpgme_op_decrypt_start): Ditto.
* src/engine.c (_gpgme_engine_op_decrypt_verify): Remove.
(_gpgme_engine_op_decrypt): Add arg FLAGS.
* src/gpgme.def, src/libgpgme.vers: Add new functions.
* src/engine-backend.h (struct engine_ops): Remove member
'decrypt_verify'. Add FLAGS to 'decrypt'. Adjust all initialization.
* src/engine-uiserver.c (uiserver_decrypt): Remove.
(uiserver_decrypt_verify): Remove.
(_uiserver_decrypt): Rename to ...
(uiserver_decrypt): this. Replace arg VERIFY by new arg FLAGS.
* src/engine-gpg.c (gpg_decrypt): Support GPGME_DECRYPT_UNWRAP.
(gpg_encrypt): Support GPGME_ENCRYPT_WRAP.
* tests/run-decrypt.c (main): New option --unwrap.
* tests/run-encrypt.c (main): New option --wrap.
--
Manual testing of that wrap/unwrap feature can be done this way:
./run-encrypt --verbose --key Alice /etc/motd > x
./run-decrypt --verbose --unwrap x > y
./run-encrypt --verbose --key Bob --wrap y > z
1. The message was first encrypted to Alice.
2. Alice decrypts the message receiving a valid OpenPGP message.
3. Alice encrypt that message to Bob
This will also work with encrypted and signed messages; the signature
will be kept intact during re-encryption. Requires GnuPG 2.1.12.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/dirinfo.c (WANT_GPG_WKS_CLIENT_NAME): New const.
(struct dirinfo): New field 'gpg_wks_client_name'.
(get_gpgconf_item): Build it on demand.
(gpgme_get_dirinfo): New value "gpg-wks-client-name" for WHAT.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (GPGME_ENCRYPT_THROW_KEYIDS): New flag.
* src/engine-gpg.c (gpg_encrypt): Implement flag
(gpg_encrypt_sign): Implement flag.
* tests/run-encrypt.c (main): New option --throw-keyids.
--
It would be nice to also selectively hide recipients (that is gpg
--hidden-recipient) but our API does not ye allow this because it is
based on key objects. A possible way to implement that would be a API
to set processing flags into a key but this is complicated due to the
reference counting and thus the possibility that a key object is used
by different context.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/start-stop-agent: Do not create 'gpg-agent.conf' if it does
not exist.
Fixes-commit: 16b202d999
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/tests/Makefile.am (gpg-agent.conf): Do not hard-code the
option. This breaks gpg-agent from GnuPG 2.0.
* tests/start-stop-agent: Rather, check if the option is supported and
add it to the configuration if it is.
GnuPG-bug-id: 3008
Fixes-commit: bbf19124bb
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpg/t-gpgconf.c (main): Reduce iterations to 10.
* tests/gpg/t-thread-keylist-verify.c,
tests/gpg/t-thread-keylist.c (THREAD_COUNT): Reduce to 10.
--
While these tests tested for race conditions a smaller number
of iteration should still show problems if they are run on
multiple systems and regulary. While the 100 Thread count in
the t-thread tests could lead to resource problems.
* tests/start-stop-agent: Don't autostart agent on --stop and
running check. Use --debug-quick-random when starting.
--
This should speed up the tests especially on low entropy systems.
Possibly fixing a hang on pythons op_genkey test in the Launchpad
build enviorment (see launchpad issue 1655298)
* tests/gpg/t-gpgconf.c: Include support functions.
(fail_if_err): Remove macro.
(init_gpgme): Remove function.
(lookup): New function.
(main): Update some values and verify that the changes are applied.
* tests/gpg/t-support.h (test): New assert-like macro.
GnuPG-bug-id: 2881
Signed-off-by: Justus Winter <justus@g10code.com>
* src/engine-gpg.c (struct engine_gpg): New field
override_session_key.
(gpg_release): Free that field.
(gpg_decrypt): With gnupg 2.1.16 use --override-session-key-fd.
* tests/run-decrypt.c (main): Fix setting over the override key.
--
Note that this works only with gnupg 2.1.16 and later.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpgme.texi: Document requirements of verifying that it is OK to
use session_key.
* tests/run-decrypt.c: Ensure that we fail if we're unable to access
the session key, so that we do not violate the guidance above.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Changed the description
-@code{gpgme_set_ctx_flag (ctx, "export-session-key")} returns
-@code{GPG_ERR_NO_ERROR} or @code{gpgme_get_ctx_flag (ctx,
-"export-session-key")} returns @code{"1"}.
+@code{gpgme_set_ctx_flag (ctx, "export-session-key")} returns success
+or @code{gpgme_get_ctx_flag (ctx, "export-session-key")} returns true
+(non-empty string).
to get gpgme_get_ctx_flag for boolean values in sync with its own
description.
Note that I don't agree with the above suggestion but it does not
really harm to have it in the man page.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.c (gpgme_set_ctx_flag): Add flags "export-session-key" and
"override-session-key".
(gpgme_get_ctx_flag): Ditto.
(gpgme_set_export_session_keys): Remove.
(gpgme_get_export_session_keys): Remove.
* src/gpgme.def, src/libgpgme.vers: Remove them.
* src/context.h (struct gpgme_context): Add field
override_session_key.
* src/decrypt-verify.c (decrypt_verify_start): Pass
override_session_key value to the engine.
* src/decrypt.c (decrypt_start): Ditto.
* src/engine.c (_gpgme_engine_op_decrypt): Ditto.
(_gpgme_engine_op_decrypt_verify): Ditto.
* src/engine-backend.h (struct engine_ops): Extend DECRYPT and
DECRYPT_VERIFY_START with override_session_key.
* src/engine-uiserver.c (_uiserver_decrypt): Add stub arg
override_session_key.
(uiserver_decrypt): Ditto.
(uiserver_decrypt_verify): Ditto.
* src/engine-gpgsm.c (gpgsm_decrypt): Ditto.
* src/engine-gpg.c (gpg_decrypt): Add arg override_session_key and set
corresponding gpg option.
* tests/run-decrypt.c (print_result): Print the session key if
available.
(main): Add options --export-session-key and --override-session-key.
--
To keep the number of context manipulation functions at bay, this
patches removes the just added gpgme_set_export_session_keys and
gpgme_get_export_session_keys by flags for the generic context
function.
The patch also implements the --override-session-key feature.
GnuPG-bug-id: 2754
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (gpgme_get_ctx_flag): New.
* src/gpgme.c (gpgme_set_ctx_flag): Move down the file and add a trace
statement.
(gpgme_get_ctx_flag): New.
* src/gpgme.def, src/libgpgme.vers: Add new interface.
Signed-off-by: Werner Koch <wk@gnupg.org>
* gpg/t-thread-keylist-verify.c,
gpg/t-thread-keylist.c: Reduce threads to 100
--
Due to the limit of FD_SETSIZE the
number of parallel threads is limited. So some systems
run into this problem when running the testsuite.
* tests/gpg/t-thread-keylist-verify.c (start_keylist): Mark
arg as unused. Release context.
(start_verify): Ditto.
(main): Mark args as unused.
* tests/gpg/t-thread-keylist.c (start_keylist): Mark
arg as unused. Release context.
(main): Mark args as unused.
* configure.ac: Require libgpg-error 1.17. No longer
check for pthread.
* doc/gpgme.texi: Document removed neccessity for thread
safe gpgme flavours.
* src/sema.h (DEFINE_GLOBAL_LOCK),
(DEFINE_STATIC_LOCK, INIT_LOCK, DECLARE_LOCK)
(DESTROY_LOCK, LOCK, UNLOCK): Change to gpgrt equivalents.
* src/posix-sema.c, src/w32-sema.c: Removed.
* src/Makefile.am: Remove libpthread and
Update accordingly.
* src/ath.c, src/ath.h (ath_mutex_init)
(ath_mutex_destroy, ath_mutex_lock, ath_mutex_unlock): Removed.
* src/ath.h (ATH_MUTEX_INITIALIZER): Removed.
* src/version.c (do_subsystem_inits): sema_subsystem_init is
no longer required.
* tests/gpg/Makefile.am: Add new threading tests.
(t_thread1_LDADD, t_cancel_LDADD):
Use just gpgme.
* tests/gpg/t-thread-keylist-verify.c,
tests/gpg/t-thread-keylist.c: New.
* src/gpgme-config.in: Use -lgpgme for thread-model pthread.
--
Using gpgrt locks instead of pthread locks removes
the neccessity to link pthread directly to gpgme and
have a different, thread safe flavor of gpgme. Now
gpgme is thread-safe if the conditions mentioned
in the doc are met.
As the cpp bindings linked against libgpgme
and not libgpgme-pthread this fixes threading problems
with them.
libgpgme-pthread is removed but gpgme-config still supports
--thread=pthread for compatibility with find scripts.
* lang/cpp/src/key.cpp: Include <strings.h> for 'strcasecmp'.
* tests/gpg/t-cancel.c: Include <sys/select.h> for 'fd_set' and
friends.
Signed-off-by: Justus Winter <justus@g10code.com>
* THANKS, doc/ChangeLog-2011, tests/ChangeLog-2011,
tests/gpg/geheim.txt: convert from iso 8859-1 to utf-8.
* lang/qt/src/dataprovider.cpp, lang/qt/src/qgpgmerefreshkeysjob.cpp,
lang/qt/src/qgpgmesecretkeyexportjob.cpp: replace U+FFFD REPLACEMENT
CHARACTER with proper U+00E4 LATIN SMALL LETTER A WITH DIAERESIS.
--
Note that src/versioninfo.rc.in is still ISO-8859-1. I don't know
whether Windows will properly handle UTF-8 in this file or not, so i
have not touched it.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* lang/python/tests/Makefile.am (./pubring-stamp): Use --batch with
GPG to avoid Pinentries during import when using GnuPG >= 2.1.
Replace touch by echo.
* tests/gpg/Makefile.am (./pubring-stamp): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (gpgme_interact_cb_t): New.
(GPGME_INTERACT_CARD): New.
(gpgme_op_interact_start, gpgme_op_interact): New.
* src/libgpgme.vers, src/gpgme.def: Add new functions.
* src/edit.c (op_data_t): Rename fnc to fnc_old and change users. Add
fnc.
(edit_status_handler): Call old or new callback.
(command_handler): Ditto.
(interact_start): New.
(gpgme_op_interact_start, gpgme_op_interact_start): New.
* src/status-table.c (_gpgme_status_to_string): New.
* tests/gpg/t-edit.c (edit_fnc): Rename to interact_fnc and change
type of STATUS. Use gpgme_io_writen.
(main): s/gpgme_op_edit/gpgme_op_interact/.
--
This change will eventually allow us to remove all those status codes
from gpgme.h.
Signed-off-by: Werner Koch <wk@gnupg.org>
