* lang/cpp/src/Makefile.am (copied_headers): New.
(build rule for all copied headers): New.
(BUILT_SOURCES): New.
(CLEANFILES): Add copied_headers.
--
The forwarding headers make it easier to use the headers from the Qt
bindings when building them against the built but not installed C++
bindings because we can always include the C++ headers with gpgme++/
prefix.
GnuPG-bug-id: 7110
* lang/cpp/src/defaultassuantransaction.h,
lang/cpp/src/gpgadduserideditinteractor.h,
lang/cpp/src/gpgagentgetinfoassuantransaction.h,
lang/cpp/src/gpggencardkeyinteractor.h,
lang/cpp/src/gpgsetexpirytimeeditinteractor.h,
lang/cpp/src/gpgsetownertrusteditinteractor.h,
lang/cpp/src/gpgsignkeyeditinteractor.h,
lang/cpp/src/interfaces/assuantransaction.h,
lang/cpp/src/interfaces/dataprovider.h,
lang/cpp/src/interfaces/statusconsumer.h,
lang/cpp/src/scdgetinfoassuantransaction.h,
lang/cpp/src/statusconsumerassuantransaction.h,
lang/cpp/src/trustitem.h: Use #include "foo.h" instead of
#include <foo.h> for own headers.
--
This fixes the build for projects that include the headers (as intended)
with #include <gpgme++/...> and that don't add the gpgme++ subdirectory
to the list of include paths for the compiler.
GnuPG-bug-id: 7110
* lang/cpp/src/gpgmefw.h (gpgme_revocation_key_t): New forward
declaration.
* lang/cpp/src/key.cpp, lang/cpp/src/key.h (class Key): New methods
revocationKey, numRevocationKeys, revocationKeys.
(class RevocationKey): New.
(swap): New overload for RevocationKey.
(operator<<): New overload for RevocationKey.
* lang/cpp/src/key.cpp (operator<<): Add information about revocation
keys to the output stream for Key.
* lang/cpp/tests/run-keylist.cpp (main): Don't output Key if nextKey
failed, e.g. at the end of the key listing.
--
GnuPG-bug-id: 7118
* lang/cpp/src/editinteractor.cpp (parse_sc_op_failure): New.
(CallbackHelper::edit_interactor_callback_impl): Parse failure code on
GPGME_STATUS_SC_OP_FAILURE status.
(sc_op_failure_to_error): New.
--
This converts a SC_OP_FAILURE status message logged by gpg to a
corresponding error. Unfortunately, GPG_ERR_BAD_PIN and
GPG_ERR_BAD_RESET_CODE are mapped to the same SC_OP_FAILURE code, so
that we had to choose one.
GnuPG-bug-id: 6971
* lang/cpp/tests/run-wkdlookup.cpp (main): Replace backslashes with
forward slashes in homedir returned by GpgME::dirInfo. Use "gpgconf
--launch dirmngr" to start dirmngr.
--
With this change the same code as by QGpgMEWKDLookupJob is again used to
launch dirmngr. It also fixes the bad example of starting dirmngr
without the help of gpgconf.
GnuPG-bug-id: 6833
* lang/cpp/src/context.h (enum EncryptionFlags): Add constant
EncryptFile.
* lang/cpp/src/global.h (enum SignatureMode): Add constant SignFile.
* lang/cpp/src/context.cpp (sigflags2sigflags): Handle new flag
SignFile.
(encryptflags2encryptflags): Handle new flag EncryptFile.
(operator<<): Add new flags to the corresponding debug streams.
* lang/cpp/src/signingresult.cpp (CreatedSignature::mode): Handle
new flag SignFile (even if it cannot occur).
--
GnuPG-bug-id: 6550
* lang/cpp/src/descriptionresult.cpp (DescriptionResult::isMime): New.
* lang/cpp/src/descriptionresult.h: Update accordingly.
--
This exposes the is_mime metadata from a decryption result to users
of the C++ library.
GnuPG-bug-id: 6199
Signed-off-by: Carl Schwan <carl.schwan@gnupg.com>
* NEWS: Mention this.
* lang/cpp/src/data.h, lang/cpp/src/data.cpp (Data::setSizeHint): New.
* lang/qt/src/qgpgmedecryptjob.cpp,
lang/qt/src/qgpgmedecryptverifyarchivejob.cpp,
lang/qt/src/qgpgmedecryptverifyjob.cpp,
lang/qt/src/qgpgmeencryptjob.cpp,
lang/qt/src/qgpgmesignencryptjob.cpp,
lang/qt/src/qgpgmesignjob.cpp,
lang/qt/src/qgpgmeverifydetachedjob.cpp,
lang/qt/src/qgpgmeverifyopaquejob.cpp: Set size for input IODevice.
--
This fixes the case where the old detection of the size of QIOdevice
using seek would overflow and instead explicitly uses QIODevice::size
to check for the size and pass it through as an uint64.
GnuPG-Bug-Id: T6534
* lang/cpp/src/data.cpp (Data::setFlag): New.
* lang/cpp/src/data.h: Update accordingly.
* NEWS: Mention this.
--
This exposes the generic flag mechanism for data to users
of the C++ library. It is similar to Context::setFlag but
has no getter.
* doc/gpgme.texi (GPG_ERR_FULLY_CANCELED): New.
* lang/cpp/src/context.cpp (Error::isCanceled): Also return true for
GPG_ERR_FULLY_CANCELED.
--
For internal purposes, GnuPG sometimes uses the error code
GPG_ERR_FULLY_CANCELED instead of GPG_ERR_CANCELED. From a user
perspective both values mean the same thing and should therefore be
treated identically.
GnuPG-bug-id: 6510
lang/cpp/Makefile.am (SUBDIRS): Depend tests in RUN_GPG_TESTS.
lang/python/Makefile.am (SUBDIRS): Ditto.
--
This is similar to the core and qt switch to disable the tests.
Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
ChangeLog entries added by wk.
* lang/cpp/src/key.h (canReallySign): Deprecate.
* lang/cpp/src/key.cpp (canSign): Remove workaround. Use implementation
of canReallySign.
(canReallySign): Use canSign().
(operator<<): Use canSign().
--
The workaround in canSign was added 19 years ago and canReallySign, the
workaround for the workaround, was added 13 years ago. Time to get rid
of those workarounds for a bug in gpgme which has been fixed long ago
and which cause bugs for any unsuspecting user of Key::canSign().
GnuPG-bug-id: 6456
* lang/cpp/src/verificationresult.cpp (operator<<): Fix output of
Signature::PKAStatus which doesn't represent flags. Print corresponding
name of enum value if Signature::Summary or Notation::Flags are 0.
--
GnuPG-bug-id: 6368
* lang/cpp/src/context.cpp (Context::decrypt): Use decryptionResult().
(Context::verifyDetachedSignature, Context::verifyOpaqueSignature):
Use verificationResult().
(Context::verificationResult): Ignore "no data" error for signed but
not encrypted data.
(Context::decryptAndVerify): Use decryptionResult() and
verificationResult().
--
gpgme's decrypt operations set the error to GPG_ERR_NO_DATA if no
encrypted data was found. It makes sense to use this error for the
encryption result, but it doesn't make sense to use it also for the
verfication result if signed data was found.
This way using the combined decrypt-verify operations on data that
may be encrypted and/or signed doesn't produce confusing results.
GnuPG-bug-id: 6342
* lang/cpp/src/engineinfo.h (EngineInfo::Version): Add const-overloads
of all comparison operators.
--
We keep the non-const overloads for binary compatibility.
GnuPG-bug-id: 6342
* lang/cpp/src/context.cpp (operator<<): Treat signature mode as
combination of a 2-bit flag and a 1-bit flag.
--
This fixes the output for normal signature mode.
GnuPG-bug-id: 6342
* lang/cpp/src/global.h (enum SignatureMode): Add constant SignArchive.
* lang/cpp/src/context.cpp (sigmode2sigmode): Rename to
sigflags2sigflags
(sigflags2sigflags): ... and rename argument mode to flags and treat
it as flags. Adjust the callers.
(operator<<): Change local CHECK macro to handle flags. Add new flag
to debug stream.
* lang/cpp/src/signingresult.cpp (CreatedSignature::mode): Handle
new flags (even if it cannot occur currently).
--
GnuPG-bug-id: 6342
* lang/cpp/src/context.h (EncryptArchive): New flag.
* lang/cpp/src/context.cpp (encryptflags2encryptflags): Convert
EncryptArchive to corresponding gpgme encrypt flags.
(operator<<): Add new flag to debug stream.
--
GnuPG-bug-id: 6342
* lang/cpp/src/context.h (WantAddress): New flag.
* lang/cpp/src/context.cpp (encryptflags2encryptflags): Convert
WantAddress to corresponding gpgme encrypt flags.
(operator<<): Add new flag to debug stream.
--
GnuPG-bug-id: 6359
* lang/cpp/src/editinteractor.cpp (edit_interactor_callback_impl):
Handle status errors.
* lang/cpp/src/gpgrevokekeyeditinteractor.cpp
(GpgRevokeKeyEditInteractor::Private::nextState): Remove handling of
status errors.
--
With this change status errors are handled for all interactors. In
particular, this makes all edit interactors handle canceled password
prompts correctly.
GnuPG-bug-id: 6305
* lang/cpp/src/editinteractor.cpp (edit_interactor_callback_impl): Do
not call nextState() if status needs no response.
* lang/cpp/src/gpgaddexistingsubkeyeditinteractor.cpp
(GpgAddExistingSubkeyEditInteractor::Private::nextState),
lang/cpp/src/gpgadduserideditinteractor.cpp
(GpgAddUserIDEditInteractor::nextState),
lang/cpp/src/gpggencardkeyinteractor.cpp
(GpgGenCardKeyInteractor::nextState),
lang/cpp/src/gpgrevokekeyeditinteractor.cpp
(GpgRevokeKeyEditInteractor::Private::nextState),
lang/cpp/src/gpgsetexpirytimeeditinteractor.cpp
(GpgSetExpiryTimeEditInteractor::nextState),
lang/cpp/src/gpgsetownertrusteditinteractor.cpp
(GpgSetOwnerTrustEditInteractor::nextState),
lang/cpp/src/gpgsignkeyeditinteractor.cpp
(GpgSignKeyEditInteractor::nextState): Remove handling of statuses that
need no response.
--
This change removes superfluous code duplication.
GnuPG-bug-id: 6305
lang/cpp/src/gpggencardkeyinteractor.h (class GpgGenCardKeyInteractor):
Add enum Curve. Add member function setCurve.
lang/cpp/src/gpggencardkeyinteractor.cpp
(class GpgGenCardKeyInteractor::Private): Initialize simple members
in-class. Add member curve.
(GpgGenCardKeyInteractor::~GpgGenCardKeyInteractor): Use default d'tor.
(GpgGenCardKeyInteractor::setCurve): New.
(GpgGenCardKeyInteractor::action): Return curve defaulting to
Curve25519.
--
This enables users of this interactor to request the generation of
ECC keys with a specific curve as smart card keys. It's up to the user
to specify a curve that is actually supported by the smart card.
GnuPG-bug-id: 4429
* lang/cpp/src/gpgsignkeyeditinteractor.cpp (enum SignKeyState): Add
new state REJECT_SIGN_EXPIRED.
(makeTable): Add entries for new state to transition map.
(GpgSignKeyEditInteractor::action): Handle new state.
--
With this change the edit interactor aborts the key signing operation
with a "key expired" error instead of with a "general error".
GnuPG-bug-id: 6155
* lang/cpp/src/importresult.cpp (ImportResult::mergeWith): Replace
'auto' in lambdas with the actual type.
--
Generic lambdas require C++14.
GnuPG-bug-id: 6141
* lang/cpp/src/gpgaddexistingsubkeyeditinteractor.cpp
(GpgAddExistingSubkeyEditInteractor::Private::nextState): Fix inverted
logic of string comparisons.
--
This fixes the problem that the interactor didn't return the proper
error code if gpg didn't accept the key grip or the expiration date.
GnuPG-bug-id: 6137
* lang/cpp/src/GpgmeppConfig-w32.cmake.in.in,
lang/cpp/src/GpgmeppConfig.cmake.in.in: Remove find_package() call.
--
The KF5 variants have been removed years ago with revision
a3cf30f894.
* lang/cpp/src/key.cpp (ostream operator<< for Subkey): Fix wrong output
of isInvalid and isDisabled flags. Add output of key grip, card serial
number and the flags isSecret, isQualified, isDeVs, and isCardKey.
--
This makes it easier to check those properties for different keys, e.g.
with the run-keylist test program.
GnuPG-bug-id: 5965
* lang/cpp/tests/run-keylist.cpp (main): Handle --with-secret option.
Print error for unknown option.
--
The --with-secret option was already listed in the help. Now it also
works.
GnuPG-bug-id: 5965
* lang/cpp/src/context_p.h (enum Context::Private::Operation): Add
value KeyListWithImport.
* lang/cpp/src/context.cpp (Context::startKeyListing, Context::nextKey):
Set lastop to KeyListWithImport if keylist mode includes Locate.
--
Adding Import to lastop for keylist operations that perform a locate
allows retrieving the import result with Context::importResult.
GnuPG-bug-id: 5951
* lang/cpp/src/importresult.h, lang/cpp/src/importresult.cpp (class
ImportResult): Add member function mergeWith.
--
This allows creating a consolidated result of several independent
imports. If the import results to merge considered the same keys, then
not all counts can be consolidated correctly, but the important numbers
like the number of considered keys, the number of imported keys, the
number of unchanged keys and the numbers of new user IDs, subkeys,
signatures and revocations should be correct.
GnuPG-bug-id: 5951
* lang/cpp/src/context.h, lang/cpp/src/context.cpp (class Context):
Add nested class KeyListModeSaver.
--
This RAII-style class can be used to save the currently used key list
mode in case it needs to be changed temporarily. On destruction, it
will restore the key list mode that was active at construction time.
GnuPG-bug-id: 5951
* lang/cpp/tests/run-getkey.cpp, lang/cpp/tests/run-keylist.cpp (main):
Check used keylist mode.
--
Since Context::setKeyListMode() does not return the error returned by
gpgme, we need to verify explicitly that the keylist mode was set
successfully.
GnuPG-bug-id: 5951
