* lang/cpp/src/defaultassuantransaction.h,
lang/cpp/src/gpgadduserideditinteractor.h,
lang/cpp/src/gpgagentgetinfoassuantransaction.h,
lang/cpp/src/gpggencardkeyinteractor.h,
lang/cpp/src/gpgsetexpirytimeeditinteractor.h,
lang/cpp/src/gpgsetownertrusteditinteractor.h,
lang/cpp/src/gpgsignkeyeditinteractor.h,
lang/cpp/src/interfaces/assuantransaction.h,
lang/cpp/src/interfaces/dataprovider.h,
lang/cpp/src/interfaces/statusconsumer.h,
lang/cpp/src/scdgetinfoassuantransaction.h,
lang/cpp/src/statusconsumerassuantransaction.h,
lang/cpp/src/trustitem.h: Use #include "foo.h" instead of
#include <foo.h> for own headers.
--
This fixes the build for projects that include the headers (as intended)
with #include <gpgme++/...> and that don't add the gpgme++ subdirectory
to the list of include paths for the compiler.
GnuPG-bug-id: 7110
* lang/cpp/src/gpgmefw.h (gpgme_revocation_key_t): New forward
declaration.
* lang/cpp/src/key.cpp, lang/cpp/src/key.h (class Key): New methods
revocationKey, numRevocationKeys, revocationKeys.
(class RevocationKey): New.
(swap): New overload for RevocationKey.
(operator<<): New overload for RevocationKey.
* lang/cpp/src/key.cpp (operator<<): Add information about revocation
keys to the output stream for Key.
* lang/cpp/tests/run-keylist.cpp (main): Don't output Key if nextKey
failed, e.g. at the end of the key listing.
--
GnuPG-bug-id: 7118
* lang/qt/src/threadedjobmixin.cpp (_detail::audit_log_as_html): Use
QByteArray overload of QString::fromUtf8.
--
There's no need to make the code more complicated than necessary. Unless
we want to provoke weird compiler warnings. :-)
* lang/qt/src/qgpgmeexportjob.cpp (ExportJob::exec): Return a value and
remove unused argument names.
--
ExportJob::exec is never executed because its virtual overload is always
used. Therefore it doesn't matter what value we return.
* lang/cpp/src/editinteractor.cpp (parse_sc_op_failure): New.
(CallbackHelper::edit_interactor_callback_impl): Parse failure code on
GPGME_STATUS_SC_OP_FAILURE status.
(sc_op_failure_to_error): New.
--
This converts a SC_OP_FAILURE status message logged by gpg to a
corresponding error. Unfortunately, GPG_ERR_BAD_PIN and
GPG_ERR_BAD_RESET_CODE are mapped to the same SC_OP_FAILURE code, so
that we had to choose one.
GnuPG-bug-id: 6971
* lang/qt/src/qgpgmeaddexistingsubkeyjob.cpp
(QGpgMEAddExistingSubkeyJob::exec): Remove call of resultHook.
* lang/qt/src/qgpgmedecryptjob.cpp (QGpgMEDecryptJob::exec): Remove
call of resultHook.
(QGpgMEDecryptJob::resultHook): Remove.
* lang/qt/src/qgpgmedecryptjob.h (QGpgMEDecryptJob): Remove resultHook
override. Remove member mResult.
* lang/qt/src/qgpgmedecryptverifyjob.cpp (QGpgMEDecryptVerifyJob::exec):
Remove call of resultHook.
(QGpgMEDecryptVerifyJob::resultHook): Remove.
* lang/qt/src/qgpgmedecryptverifyjob.h (QGpgMEDecryptVerifyJob): Remove
resultHook override. Remove member mResult.
* lang/qt/src/qgpgmeencryptjob.cpp (QGpgMEEncryptJob::exec): Remove
call of resultHook.
(QGpgMEEncryptJob::resultHook): Remove.
* lang/qt/src/qgpgmeencryptjob.h (QGpgMEEncryptJob): Remove resultHook
override. Remove member mResult.
* lang/qt/src/qgpgmegpgcardjob.cpp (QGpgMEGpgCardJob::exec): Remove
call of resultHook.
* lang/qt/src/qgpgmeimportfromkeyserverjob.cpp
(QGpgMEImportFromKeyserverJob::exec): Remove call of resultHook.
(QGpgMEImportFromKeyserverJob::resultHook): Remove.
* lang/qt/src/qgpgmeimportfromkeyserverjob.h
(QGpgMEImportFromKeyserverJob): Remove resultHook override. Remove
member mResult.
* lang/qt/src/qgpgmeimportjob.cpp (QGpgMEImportJob::exec): Remove call
of resultHook.
(QGpgMEImportJob::resultHook): Remove.
* lang/qt/src/qgpgmeimportjob.h (QGpgMEImportJob): Remove resultHook
override. Remove member mResult.
* lang/qt/src/qgpgmekeyformailboxjob.cpp (QGpgMEKeyForMailboxJob::exec):
Remove call of resultHook.
* lang/qt/src/qgpgmekeylistjob.cpp (QGpgMEKeyListJob::QGpgMEKeyListJob):
Remove initialization of mResult.
(QGpgMEKeyListJob::resultHook): Do not set (removed) mResult.
* lang/qt/src/qgpgmekeylistjob.h (QGpgMEKeyListJob): Remove member
mResult.
* lang/qt/src/qgpgmelistallkeysjob.cpp
(QGpgMEListAllKeysJob::QGpgMEListAllKeysJob): Remove initialization of
mResult.
(QGpgMEListAllKeysJob::exec): Remove call of resultHook.
(QGpgMEListAllKeysJob::resultHook): Remove.
* lang/qt/src/qgpgmelistallkeysjob.h (QGpgMEListAllKeysJob): Remove
resultHook override. Remove member mResult.
* lang/qt/src/qgpgmereceivekeysjob.cpp (QGpgMEReceiveKeysJob::exec):
Remove call of resultHook.
(QGpgMEReceiveKeysJob::resultHook): Remove.
* lang/qt/src/qgpgmereceivekeysjob.h (QGpgMEReceiveKeysJob): Remove
resultHook override. Remove member mResult.
* lang/qt/src/qgpgmerevokekeyjob.cpp (QGpgMERevokeKeyJob::exec): Remove
call of resultHook.
* lang/qt/src/qgpgmesignencryptjob.cpp (QGpgMESignEncryptJob::exec):
Remove call of resultHook.
(QGpgMESignEncryptJob::resultHook): Remove.
* lang/qt/src/qgpgmesignencryptjob.h (QGpgMESignEncryptJob): Remove
resultHook override. Remove member mResult.
* lang/qt/src/qgpgmesignjob.cpp (QGpgMESignJob::exec): Remove call of
resultHook.
(QGpgMESignJob::resultHook): Remove.
* lang/qt/src/qgpgmesignjob.h (QGpgMESignJob): Remove resultHook
override. Remove member mResult.
* lang/qt/src/qgpgmeverifydetachedjob.cpp
(QGpgMEVerifyDetachedJob::exec): Remove call of resultHook.
(QGpgMEVerifyDetachedJob::resultHook): Remove.
* lang/qt/src/qgpgmeverifydetachedjob.h (QGpgMEVerifyDetachedJob):
Remove resultHook override. Remove member mResult.
* lang/qt/src/qgpgmeverifyopaquejob.cpp (QGpgMEVerifyOpaqueJob::exec):
Remove call of resultHook.
(QGpgMEVerifyOpaqueJob::resultHook): Remove.
* lang/qt/src/qgpgmeverifyopaquejob.h (QGpgMEVerifyOpaqueJob): Remove
resultHook override. Remove member mResult.
* lang/qt/src/qgpgmewkdlookupjob.cpp (QGpgMEWKDLookupJob::exec):
Remove call of resultHook.
--
All overrides of resultHook (except for the one of QGpgMEKeyListJob)
are superfluous. All the resultHook overrides do is store the result in
a member variable which is then returned in exec() (which just before
returning calls resultHook). The member variable the result is stored in
is only ever used by exec(). So exec() can simply return the result
directly. Some Job subclasses call resultHook without overriding it.
That's equally useless because the default implementation of resultHook
is empty. The only resultHook override that does anything useful is the
one of QGpgMEKeyListJob.
* lang/qt/src/qgpgmedecryptjob.cpp,
lang/qt/src/qgpgmeimportfromkeyserverjob.cpp,
lang/qt/src/qgpgmeimportjob.cpp: Remove obsolete comment.
* lang/qt/src/qgpgmekeylistjob.cpp,
lang/qt/src/qgpgmelistallkeysjob.cpp: Remove long obsolete, #if 0'ed out
definitions of showErrorDialog.
--
Informing the users about errors is the responsibility of the users of
the QGpgME Job API since a long time.
* lang/cpp/tests/run-wkdlookup.cpp (main): Replace backslashes with
forward slashes in homedir returned by GpgME::dirInfo. Use "gpgconf
--launch dirmngr" to start dirmngr.
--
With this change the same code as by QGpgMEWKDLookupJob is again used to
launch dirmngr. It also fixes the bad example of starting dirmngr
without the help of gpgconf.
GnuPG-bug-id: 6833
* lang/qt/src/qgpgmewkdlookupjob.cpp (startDirmngr): Replace backslashes
with forward slashes in homedir returned by GpgME::dirInfo.
--
This works around a bug which causes backslashes to be escaped (doubled)
twice on Windows, once by gpgme_op_spawn and once by the spawn helper
gpgme-w32spawn. The next versions of GnuPG 2.2 and 2.4 also have a
workaround for this.
GnuPG-bug-id: 6833
* lang/qt/src/qgpgmequickjob.cpp: Fix expiration calculation
--
The job calculates the validity as the seconds since epoch,
while GPG expects the seconds since the current time.
This leads to the validity being significantly longer than expected.
GnuPG-Bug-Id: 6889
* lang/qt/src/Makefile.am: Add new files.
* lang/qt/src/job.cpp (VerifyDetachedJob): Move definition of
constructor and destructor and inclusion of the moc file to the
corresponding .cpp file.
* lang/qt/src/verifydetachedjob.cpp: New.
* lang/qt/src/verifydetachedjob.h (VerifyDetachedJob): Add member
functions setSignatureFile, signatureFile, setSignedFile, signedFile.
* lang/qt/src/verifydetachedjob_p.h: New.
* lang/qt/src/qgpgmeverifydetachedjob.cpp (class
QGpgMEVerifyDetachedJobPrivate): New.
(QGpgMEVerifyDetachedJob::QGpgMEVerifyDetachedJob): Instantiate private
job class.
(verify_from_filename): New.
* lang/qt/tests/Makefile.am: Add new test program.
* lang/qt/tests/run-verifydetachedjob.cpp: New.
--
This makes it possible to tell gpg to read the input directly from the
specified files bypassing GpgME's Data IO when verifying a detached
signature.
GnuPG-bug-id: 6550
* lang/qt/src/Makefile.am: Add new files.
* lang/qt/src/job.cpp (VerifyOpaqueJob): Move definition of constructor
and destructor and inclusion of the moc file to the corresponding .cpp
file.
* lang/qt/src/verifyopaquejob.cpp: New.
* lang/qt/src/verifyopaquejob.h (VerifyOpaqueJob): Add member
functions setInputFile, inputFile, setOutputFile, outputFile.
* lang/qt/src/verifyopaquejob_p.h: New.
* lang/qt/src/qgpgmeverifyopaquejob.cpp (class
QGpgMEVerifyOpaqueJobPrivate): New.
(QGpgMEVerifyOpaqueJob::QGpgMEVerifyOpaqueJob): Instantiate private
job class.
(verify_from_filename): New.
* lang/qt/tests/Makefile.am: Add new test program.
* lang/qt/tests/run-verifyopaquejob.cpp: New.
--
This makes it possible to tell gpg to read the input and write the
output directly to a specified file bypassing GpgME's Data IO when
verifying an opaque signed (or clear signed) file.
GnuPG-bug-id: 6550
* lang/qt/src/Makefile.am: Add new files.
* lang/qt/src/job.cpp (DecryptVerifyJob): Move definition of constructor
and destructor and inclusion of the moc file to the corresponding .cpp
file.
* lang/qt/src/decryptverifyjob.cpp: New.
* lang/qt/src/decryptverifyjob.h (DecryptVerifyJob): Add member
functions setInputFile, inputFile, setOutputFile, outputFile.
* lang/qt/src/decryptverifyjob_p.h: New.
* lang/qt/src/qgpgmedecryptverifyjob.cpp (class
QGpgMEDecryptVerifyJobPrivate): New.
(QGpgMEDecryptVerifyJob::QGpgMEDecryptVerifyJob): Instantiate private
job class.
(decrypt_verify_from_filename): New.
* lang/qt/tests/Makefile.am: Add new test program.
* lang/qt/tests/run-decryptverifyjob.cpp: New.
--
This makes it possible to tell gpg to read the input and write the
output directly to a specified file bypassing GpgME's Data IO when
decrypting (and verifying) a file.
GnuPG-bug-id: 6550
* lang/qt/src/Makefile.am: Add new files.
* lang/qt/src/job.cpp (EncryptJob, SignJob, SignEncryptJob): Move
definition of constructor and destructor and inclusion of the moc file
to the corresponding .cpp files.
* lang/qt/src/encryptjob.cpp (EncryptJob): Define constructor. Define
destructor as default. Include moc file.
* lang/qt/src/encryptjob.cpp, lang/qt/src/encryptjob.h (EncryptJob):
Add member functions setRecipients, recipients, setInputFile, inputFile,
setOutputFile, outputFile, setEncryptionFlags, encryptionFlags.
* lang/qt/src/encryptjob_p.h (EncryptJobPrivate): Add members
m_recipients, m_inputFilePath, m_outputFilePath, m_encryptionFlags.
* lang/qt/src/qgpgmeencryptjob.cpp (encrypt_to_filename): New.
(QGpgMEEncryptJobPrivate::startIt): Start the job with the values
from the member variables.
* lang/qt/src/qgpgmesignencryptjob.cpp (sign_encrypt_to_filename): New.
(QGpgMESignEncryptJobPrivate::startIt): Start the job with the values
from the member variables.
* lang/qt/src/qgpgmesignjob.cpp (class QGpgMESignJobPrivate): New.
(QGpgMESignJob::QGpgMESignJob): Instantiate private job class.
(sign_to_filename): New.
* lang/qt/src/signencryptjob.cpp (SignEncryptJob): Define constructor.
Define destructor as default. Include moc file.
* lang/qt/src/signencryptjob.cpp, lang/qt/src/signencryptjob.h
(SignEncryptJob): Add member functions setSigners, signers,
setRecipients, recipients, setInputFile, inputFile, setOutputFile,
outputFile, setEncryptionFlags, encryptionFlags.
* lang/qt/src/signencryptjob_p.h (SignEncryptJobPrivate): Add members
m_signers, m_recipients, m_inputFilePath, m_outputFilePath,
m_encryptionFlags.
* lang/qt/src/signjob.cpp: New.
* lang/qt/src/signjob.h (SignJob): Add member functions setSigners,
signers, setInputFile, inputFile, setOutputFile, outputFile,
setSigningFlags, signingFlags.
* lang/qt/src/signjob_p.h: New.
* lang/qt/tests/Makefile.am: Add new test programs.
* lang/qt/tests/run-encryptjob.cpp: New.
* lang/qt/tests/run-signjob.cpp: New.
--
This makes it possible to tell gpg to read the input and write the
output directly to a specified file bypassing GpgME's Data IO when
signing and/or encrypting a file.
GnuPG-bug-id: 6550
* lang/qt/src/qgpgmeencryptjob.cpp,
lang/qt/src/qgpgmesignencryptjob.cpp, lang/qt/src/qgpgmesignjob.cpp:
Remove long commented out showErrorDialog member function definitions.
--
Displaying error messages is delegated to the job users since ages.
* lang/cpp/src/context.h (enum EncryptionFlags): Add constant
EncryptFile.
* lang/cpp/src/global.h (enum SignatureMode): Add constant SignFile.
* lang/cpp/src/context.cpp (sigflags2sigflags): Handle new flag
SignFile.
(encryptflags2encryptflags): Handle new flag EncryptFile.
(operator<<): Add new flags to the corresponding debug streams.
* lang/cpp/src/signingresult.cpp (CreatedSignature::mode): Handle
new flag SignFile (even if it cannot occur).
--
GnuPG-bug-id: 6550
* lang/qt/src/defaultkeygenerationjob.h, lang/qt/src/qgpgmebackend.h,
lang/qt/src/quickjob.h, lang/qt/src/threadedjobmixin.h: Replace all
occurrences of Q_NULLPTR with nullptr.
--
* lang/qt/src/qgpgmewkdlookupjob.cpp (startDirmngr): Use "gpgconf
--launch dirmngr" to start dirmngr.
--
Using gpgconf to start dirmngr prevents multiple instances to be started
by the concurrently running keyserver lookup and WKD lookup.
GnuPG-bug-id: 6833
* lang/qt/src/Makefile.am: Add new files.
* lang/qt/src/cleaner.cpp, lang/qt/src/cleaner.h: New.
* lang/qt/src/util.cpp (PartialFileGuard::~PartialFileGuard): Call
Cleaner::removeFile instead of removeFile.
* lang/qt/src/util.cpp, lang/qt/src/util.h (removeFile): Remove.
--
If the initial attempt to remove the file fails then a Cleaner is
created that tries to remove the file at regular intervals (10 s)
and on destruction (which happens on application shutdown).
GnuPG-bug-id: 6584
* lang/qt/src/defaultkeygenerationjob.h (class DefaultKeyGenerationJob):
Deprecate.
--
GnuPG generates Ed25519 keys by default and has switched to 3072 bits as
default for RSA keys. DefaultKeyGenerationJob always generates RSA 2048
keys and uses the old parameter file API of GnuPG. It shouldn't be used
anymore.
GnuPG-bug-id: 6805
* lang/qt/src/util.h, lang/qt/src/util.cpp (class PartialFileGuard):
New.
* lang/qt/src/util.cpp (getRandomCharacters, createPartFileName): New.
* lang/qt/src/qgpgmeencryptarchivejob.cpp (encrypt_to_filename): Use
PartialFileGuard.
* lang/qt/src/qgpgmesignarchivejob.cpp (sign_to_filename): Ditto.
* lang/qt/src/qgpgmesignencryptarchivejob.cpp
(sign_encrypt_to_filename): Ditto.
--
When creating signed and/or encrypted archives, gpgtar now writes the
result to a temporary file name. On success, the archive is renamed to
the final file name. Otherwise, the (partially written) temporary file
is removed (if possible).
GnuPG-bug-id: 6721
* lang/qt/src/util.h, lang/qt/src/util.cpp (removeFile): New.
* lang/qt/src/qgpgmeencryptarchivejob.cpp (encrypt): Move removal of
output file from here
(encrypt_to_filename): ... to here and use new function.
* lang/qt/src/qgpgmesignarchivejob.cpp (sign): Move removal of output
file from here
(sign_to_filename): ... to here and use new function.
* lang/qt/src/qgpgmesignencryptarchivejob.cpp (sign_encrypt): Move
removal of output file from here
(sign_encrypt_to_filename): ... to here and use new function.
--
GnuPG-bug-id: 6721
* lang/qt/src/qgpgmedecryptverifyarchivejob.cpp
(decrypt_verify_from_file_name): On Windows, convert Unicode file name
to UTF-8.
* lang/qt/src/qgpgmeencryptarchivejob.cpp (encrypt,
encrypt_to_filename): On Windows, convert Unicode file name from/to
UTF-8.
* lang/qt/src/qgpgmesignarchivejob.cpp (sign, sign_to_filename): Ditto.
* lang/qt/src/qgpgmesignencryptarchivejob.cpp (sign_encrypt,
sign_encrypt_to_filename): Ditto.
--
On Windows, GnuPG expects file names to be UTF-8-encoded. This fixes
encrypting and decrypting folders with umlauts in the folder name and
in the file name of the archive. Encrypting and decrypting folders
with kanji still fails.
GnuPG-bug-id: 6728
* lang/qt/src/wkdrefreshjob.h, lang/qt/src/wkdrefreshjob.cpp
(WKDRefreshJob::start): New overload.
* lang/qt/src/wkdrefreshjob_p.h (WKDRefreshJobPrivate): Add field
m_userIds.
* lang/qt/src/qgpgmewkdrefreshjob.cpp (toEmailAddresses): New.
(locate_external_keys): Change return type and arguments.
(refresh_keys): Remove.
(QGpgMEWKDRefreshJobPrivate::startIt): Get emails from keys or user IDs.
Remove duplicates. Call locate_external_keys instead of refresh_keys.
* lang/qt/tests/run-wkdrefreshjob.cpp (CommandLineOptions,
parseCommandLine): New.
(main): Support new option --all-userids.
--
The new start() overload allows to specify the user IDs to use for the
WKD lookup explicitly. This allows updating user IDs via WKD which were
originally not retrieved via WKD.
GnuPG-bug-id: 6672
* lang/qt/tests/Makefile.am (AM_CPPFLAGS): Include Qt binding sources
before C++ binding sources and C sources.
--
This fixes the problem that the debug.h in the C sources was found
before the one in the Qt bindings.
Commit d23528cadf fixed it for Qt5, we
need Qt6 as well.
GnuPG-bug-id: 6673
* lang/qt/tests/Makefile.am (AM_CPPFLAGS): Include Qt binding sources
before C++ binding sources and C sources.
--
This fixes the problem that the debug.h in the C sources was found
before the one in the Qt bindings.
GnuPG-bug-id: 6673
* lang/qt/src/wkdrefreshjob.cpp, lang/qt/src/wkdrefreshjob.h,
lang/qt/src/wkdrefreshjob_p.h, lang/qt/src/qgpgmewkdrefreshjob.cpp,
lang/qt/src/qgpgmewkdrefreshjob.h: New.
* lang/qt/src/protocol.h (class Protocol): Add pure virtual member
function wkdRefreshJob
* lang/qt/src/protocol_p.h (Protocol::wkdRefreshJob): ... and
implement it.
* lang/qt/src/Makefile.am: Update accordingly.
* lang/qt/tests/run-wkdrefreshjob.cpp: New.
* lang/qt/tests/Makefile.am: Add new test runner.
--
This job allows updating keys via WKD. Only user IDs that were
originally retrieved via WKD (i.e. which have origin WKD) are
considered.
GnuPG-bug-id: 6672
* lang/qt/src/qgpgmeencryptarchivejob.cpp (encrypt): Remove output file
if operation was canceled or failed.
* lang/qt/src/qgpgmesignarchivejob.cpp (sign): Ditto.
* lang/qt/src/qgpgmesignencryptarchivejob.cpp (sign_encrypt): Ditto.
* lang/qt/tests/run-encryptarchivejob.cpp (CommandLineOptions): Add
field cancelTimeout.
(parseCommandLine): Add option --cancel-after. Parse option value.
(main): Check for invalid cancel timeout. Start timer for canceling
the job.
* lang/qt/tests/run-signarchivejob.cpp (CommandLineOptions): Add
field cancelTimeout.
(parseCommandLine): Add option --cancel-after. Parse option value.
(main): Check for invalid cancel timeout. Start timer for canceling
the job.
--
This change ensures that the output file is removed if the creation of
a signed or encrypted archive was canceled or failed. The new option
of the test runners enables testing the cancelation of the jobs.
GnuPG-bug-id: 6584
* lang/qt/src/util.h: Move toLogString ...
* lang/qt/src/debug.h: ... here.
* lang/qt/tests/run-importjob.cpp (main): Use toLogString.
--
This allows using the helper in dependent projects without duplicating
it everywhere.
GnuPG-bug-id: 6584
* lang/cpp/src/descriptionresult.cpp (DescriptionResult::isMime): New.
* lang/cpp/src/descriptionresult.h: Update accordingly.
--
This exposes the is_mime metadata from a decryption result to users
of the C++ library.
GnuPG-bug-id: 6199
Signed-off-by: Carl Schwan <carl.schwan@gnupg.com>
* lang/qt/src/encryptjob.cpp, lang/qt/src/encryptjob.h,
lang/qt/src/encryptjob_p.h: Add inputEncoding/setInputEncoding
to EncryptJob
* lang/qt/src/qgpgmeencryptjob.cpp: Use newly added inputEncoding
to set encoding hint of the encrypted content
--
This allows applications like KMail to set the input encoding of the
encrypted content, which simplify and improve the performance of
identifying the content type then decrypting it.
GnuPG-bug-id: 6616
Signed-off-by: Carl Schwan <carl.schwan@gnupg.com>
* lang/qt/src/QGpgmeConfig-w32.cmake.in.in,
lang/qt/src/QGpgmeQt6Config-w32.cmake.in.in: Get paths to check from
the target properties.
--
This avoids the error present in an older version where the files to
check used the correct path, but a wrong path of the DLL was set in the
target properties.
* lang/qt/src/QGpgmeConfig-w32.cmake.in.in: Fix typos in variable names.
--
Because of those typos the loop over the files to check was an empty
loops and therefore the wrong name of the DLL was never noticed.
* lang/qt/src/decryptverifyarchivejob.cpp,
lang/qt/src/decryptverifyarchivejob.h (DecryptVerifyArchiveJob): Add
member functions setInputFile, inputFile.
* lang/qt/src/decryptverifyarchivejob_p.h
(DecryptVerifyArchiveJobPrivate): Add member m_inputFilePath.
* lang/qt/src/qgpgmedecryptverifyarchivejob.cpp (decrypt_verify): Move
creation of indata to decrypt_verify_from_io_device.
(decrypt_verify_from_io_device, decrypt_verify_from_file_name): New.
(QGpgMEDecryptVerifyArchiveJob::start): Use
decrypt_verify_from_io_device instead of decrypt_verify.
(QGpgMEDecryptVerifyArchiveJobPrivate::startIt): Start the job with the
values from member variables.
* lang/qt/tests/run-decryptverifyarchivejob.cpp (createInput): Remove.
(main): Remove creation of input. Make the job read the archive directly
from the given archive name.
--
This makes it possible to tell gpgtar to read the signed/encrypted
archive directly from a specified file bypassing GpgME's Data IO.
GnuPG-bug-id: 6530
* lang/qt/src/encryptarchivejob.cpp, lang/qt/src/encryptarchivejob.h
(EncryptArchiveJob): Add member functions setRecipients, recipients,
setInputPaths, inputPaths, setOutputFile, outputFile,
setEncryptionFlags, encryptionFlags.
* lang/qt/src/encryptarchivejob_p.h (EncryptArchiveJobPrivate): Add
members m_recipients, m_inputPaths, m_outputFilePath, m_encryptionFlags.
* lang/qt/src/qgpgmeencryptarchivejob.cpp (encrypt): Move creation of
outdata to encrypt_to_io_device.
(encrypt_to_io_device, encrypt_to_filename): New.
(QGpgMEEncryptArchiveJob::start): Use encrypt_to_io_device instead of
encrypt.
(QGpgMEEncryptArchiveJobPrivate::startIt): Start the job with the
values from member variables.
* lang/qt/src/qgpgmesignarchivejob.cpp (sign): Move creation of
outdata to sign_to_io_device.
(sign_to_io_device, sign_to_filename): New.
(QGpgMESignArchiveJob::start): Use sign_to_io_device instead of sign.
(QGpgMESignArchiveJobPrivate::startIt): Start the job with the
values from member variables.
* lang/qt/src/qgpgmesignencryptarchivejob.cpp (sign_encrypt): Move
creation of outdata to sign_encrypt_to_io_device.
(sign_encrypt_to_io_device, sign_encrypt_to_filename): New.
(QGpgMESignEncryptArchiveJob::start): Use sign_encrypt_to_io_device
instead of sign_encrypt.
(QGpgMESignEncryptArchiveJobPrivate::startIt): Start the job with the
values from member variables.
* lang/qt/src/signarchivejob.cpp, lang/qt/src/signarchivejob.h
(SignArchiveJob): Add member functions setSigner, signers,
setInputPaths, inputPaths, setOutputFile, outputFile.
* lang/qt/src/signarchivejob_p.h (SignArchiveJobPrivate): Add
members m_signers, m_inputPaths, m_outputFilePath.
* lang/qt/src/signencryptarchivejob.cpp,
lang/qt/src/signencryptarchivejob.h (SignEncryptArchiveJob): Add
member functions setSigner, signers, setRecipients, recipients,
setInputPaths, inputPaths, setOutputFile, outputFile,
setEncryptionFlags, encryptionFlags.
* lang/qt/src/signencryptarchivejob_p.h (SignEncryptArchiveJobPrivate):
Add members m_signers, m_recipients, m_inputPaths, m_outputFilePath,
m_encryptionFlags.
* lang/qt/tests/run-encryptarchivejob.cpp (createOutput): Remove.
(checkOutputFilePath): New.
(main): Create file output writing to stdout if no archive name (or "-")
is given. Exit if file with given archive name already exists. Make
the jobs write the created archive directly to the given archive name.
* lang/qt/tests/run-signarchivejob.cpp (createOutput): Remove.
(checkOutputFilePath): New.
(main): Create file output writing to stdout if no archive name (or "-")
is given. Exit if file with given archive name already exists. Make
the jobs write the created archive directly to the given archive name.
--
This makes it possible to tell gpgtar to write the created archive
directly to a specified file bypassing GpgME's Data IO.
GnuPG-bug-id: 6530
