* tests/json/t-json.c (test_contains): Try all siblings of
the haystack child.
--
This fixes the case where we don't match against the
first child because the order might have changed or
a new element was inserted at the top. Then we
have to try out also all the siblings.
* t-json.c (tests): Register new tests.
* t-createkey.in.json,
t-createkey.out.json,
t-decrypt-verify.in.json,
t-decrypt-verify.out.json,
t-decrypt.in.json,
t-decrypt.out.json,
t-delete.in.json,
t-delete.out.json,
t-encrypt-sign.in.json,
t-encrypt-sign.out.json,
t-encrypt.in.json,
t-encrypt.out.json,
t-export-secret-info.in.json,
t-export-secret-info.out.json,
t-export.in.json,
t-export.out.json,
t-json.c,
t-keylist-secret.in.json,
t-keylist-secret.out.json,
t-keylist.in.json,
t-keylist.out.json,
t-verify.in.json,
t-verify.out.json,
t-version.in.json,
t-version.out.json: New.
--
Except for help and getmore there is now a test for each command.
* tests/json/t-json.c (test_contains): When searching for "*" accept
every string.
--
This allows it to write tests that check for the existence of
a string value but don't care about the contents. E.g. for Data.
* tests/json/t-json.c (main): Skip if version is not at least
2.2.0
--
In the past new tests often failed when a modern GPGME was
used with old GnuPG's.
This should avoid the hassle for packagers without the
requirement that we test against old versions.
* t-support.h (parse_version_number, parse_version_string)
(compare_versions): New. Copy&Paste from src/version.c
(check_gpg_version): New helper to check for a gpg version.
--
This should make it easier to write tests that e.g.
rely on modern gnupg features.
* configure.ac: Configure makefile.
* tests/Makefile.am: Run json tests if gpg tests are run.
* tests/json/t-json.c: New testrunner for json tests.
* tests/json/t-config.in, tests/json/t-config.out: First test.
--
The idea of this test runner is that it only looks for parts
in the output. This should allow it to write robust tests
that check for the basics in the output but don't fail when
the output is extended or slightly changed.
* src/context.h (gpgme_context): Extend with trust_model.
* src/engine-gpg.c (engine_gpg): Extend with trust_model.
(gpg_set_engine_flags): Take trust_model from context.
(build_argv): Handle trust_model.
(gpg_release): Free trust_model.
* src/gpgme.c (gpgme_set_ctx_flag): Handle trust-model flag.
(gpgme_release): Release trust-model.
* doc/gpgme.texi: Document new flag for gpgme_set_ctx_flag.
(Context Flags): New subsection for the context flags.
* tests/run-keylist.c (show_usage, main): Add new --trust-model
parameter.
--
This gives a GPGME user fine grained control over the
trust-model.
Changing the trust model for only a single application depends
on:
GnuPG-Bug-Id: T4134
Maniphest Tasks: T4134
Differential Revision: https://dev.gnupg.org/D466
* lang/python/tests/Makefile.am,
lang/qt/tests/Makefile.am,
tests/Makefile.am,
tests/gpg/Makefile.am,
tests/gpgsm/Makefile.am,
tests/opassuan/Makefile.am (GNUPGHOME): Make variable explict.
--
If the build directory has too long path, gpgme could fail.
This is similar to
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=847206
In order to fix that, this patch extracts the GNUPGHOME variable
to be presented directly in the Makefile and thus overridable by
command line option.
A build system can then create a symlink to the GNUPGHOME directory
in /tmp and use that symlink as the GNUPGHOME directory
thus making the path very short.
GnuPG-Bug-Id: T4091
Patch provided by vlmarek
* src/engine-gpg.c (engine_gpg): Add diagnostics member.
(gpg_release): Release diagnostics data.
(gpg_new): Set up logger-fd and diagnostics.
(gpg_getauditlog): New. Copy diagnostics to a user data.
(engine_ops): Add getauditlog.
* src/engine-gpgsm.c (gpgsm_getauditlog): Return not implemented
for GPGME_AUDITLOG_DIAG.
* src/getauditlog.c (getauditlog_start): Don't reset engine
for diagnostics.
* src/gpgme.h.in (GPGME_AUDITLOG_DIAG): New.
(GPGME_AUDITLOG_DEFAULT): New alias to 0.
* tests/run-decrypt.c (show_usage, main): Add --diagnostics.
* doc/gpgme.texi(Additional Logs): Document getauditlog.
--
This enables users of GPGME to get more verbose information
from gpg which can assist users in figuring out a problem
that was before hidden behind a generalized error like
"Decryption Failed".
For GPGSM it is not yet available as it is problematic to
get it properly in server mode and GPGSM already had the
original audit log mechanism in place.
GPGME_AUDITLOG_DEFAULT was added for a more explicit
documentation.
* src/gpgme.h.in (_gpgme_op_decrypt_result): Add flag
legacy_cipher_nomdc.
* src/decrypt.c (parse_status_error): Set this flag.
* tests/run-decrypt.c (print_result): print it.
(main): Print the result even on error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpg/t-verify.c (check_result): Tweak for gnupg < 2.2.7.
--
The not yet releases 2.2.7-beta may print a full fingerprint in the
ERRSIG status. This is compliant with the dscription but the new
t-verify test case did not took in account that older GnuPG versions
print only a keyid.
Fixes-commit: b99502274a
GnUPG-bug-id: 3920
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/op-support.c (_gpgme_parse_plaintext): Add arg r_mime.
* src/decrypt.c (_gpgme_decrypt_status_handler): Ser mime flag.
* src/verify.c (_gpgme_verify_status_handler): Ditto.
* src/gpgme.h.in (gpgme_op_verify_result_t): Append fields 'is_mime'
and '_unused'.
(gpgme_op_decrypt_result_t): New field 'is_mime'. Shrink '_unused'.
* tests/run-decrypt.c (print_result): Print MIME flag.
* tests/run-verify.c (print_result): Ditto.
--
Note that this flag (Liternal Data packet's 'm' mode) is only
specified in RFC-4880bis. To use it you currently need to add
"rfc4880bis" to the the gpg.conf.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (gpgme_op_encrypt_ext_start) New.
(gpgme_op_encrypt_ext): New.
(gpgme_op_encrypt_sign_ext_start): New.
(gpgme_op_encrypt_sign_ext): New.
* src/libgpgme.vers, tests/run-encrypt.c: Add them.
* src/encrypt.c (encrypt_start): Add arg recpstring.
(gpgme_op_encrypt): Factor code out to ...
(gpgme_op_encrypt_ext): new function with new arg recpstring.
(gpgme_op_encrypt_start): Factor code out to ...
(gpgme_op_encrypt_ext_start): new function with new arg recpstring.
* src/encrypt-sign.c (encrypt_sign_start): Add arg recpstring.
(gpgme_op_encrypt_sign): Factor code out to ...
(gpgme_op_encrypt_sign_ext): new function with new arg recpstring.
(gpgme_op_encrypt_sign_start): Factor code out to ...
(gpgme_op_encrypt_sign_ext_start): new function with new arg
recpstring.
* src/engine-backend.h (struct engine_ops): Change fields encrypt and
encrypt_sign.
* src/engine.c (_gpgme_engine_op_encrypt): Add arg recpstring and pass
to engine.
(_gpgme_engine_op_encrypt_sign): Ditto.
* src/engine-gpg.c (append_args_from_recipients_string): New.
(gpg_encrypt): Add arg recpstring and call new function as needed.
(gpg_encrypt_sign): Ditto.
* src/engine-gpgsm.c (set_recipients_from_string): New.
(gpgsm_encrypt): Add arg recpstring and call new function as needed.
* src/engine-uiserver.c (set_recipients_from_string): New.
(uiserver_encrypt): Add arg recpstring and call new function as
needed.
* tests/run-encrypt.c (xstrdup): New.
(main): Add option --keystring.
* src/gpgme-json.c (get_keys): Simplify.
(op_encrypt): Modify to make use of the extended encrypt function.
--
This new feature can be used to avoid the need for a key lookup and
thus several extra calls to the backend.
Note that run-test uses a semicolon as delimiter because that make
testing the feature on the command line much easier.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/op-support.c (_gpgme_parse_failure): Ignore failures with
location "gpg-exit".
* tests/gpg/t-verify.c (main): Adjust for the now working checking of
the second key.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpg/t-verify.c (PGM): New. Use it instead of __FILE__.
(test_sig1_plus_unknown_key): New test signature.
(check_result): Allow checking of several signatures.
(main): Check a signature with a know and an unknown key.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (gpgme_import_result_t): Extend with skipped_v3_keys.
* src/import.c (gpgme_op_import_result): Extend debug with new field.
(parse_import_res): Parse skipped_v3_keys.
* tests/gpg/t-support.h, tests/run-support.h (print_import_result):
Print skipped_v3_keys.
--
This makes it possible to handle this in a GUI in a future
version.
GnuPG-Bug-Id: T3776
* tests/gpg/Makefile.am: Don't allow target with '/'.
* tests/gpgsm/Makefile.am: Ditto.
--
BSD Make doesn't allow a target with '/'. We still have such a target
in lang/python/Makefile.am, but it's for maintainer only, so,
assumption to GNU Make is OK there.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/gpg/Makefile.am, tests/gpgsm/Makefile.am: Remove ./.
--
GNU Make is powerful enough for handling and interpreting of
pathname as target, but BSD Make is not.
GnuPG-bug-id: 3056
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* src/data.c (_gpgme_data_new): Check for failed selftest.
* tests/run-support.h (make_filename): Print a message on mallooc
failure.
(init_gpgme_basic): New.
* tests/run-identify.c (main): Call init_gpgme_basic becuase we do not
need to setup a protocol.
* tests/t-data.c: Define PGM and include run-support.h.
(make_filename): Remove.
(main): Call init_gpgme_basic.
--
Note: This patch may break applications which used gpgme_data but no
gpgme_new without having called the required gpgme_check_version.
GPGME can be used without a protocol for example to work with the data
object abstraction. Thus a call to gpgme_data_new also needs to check
the result of the core selftests - including on whether
gpgme_check_version has been called.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpgsm/Makefile.am (GPG_AGENT): Set var. It is used later.
--
Note that the var is used by the gpgsm.conf target.
Reported-by: Alon Bar-Lev <alon.barlev@gmail.com>
Signed-off-by: Werner Koch <wk@gnupg.org>
* lang/python/tests/Makefile.am: Distinguish target and path.
* tests/gpg/Makefile.am: Ditto.
* tests/gpgsm/Makefile.am: Ditto.
--
GNU Make is powerful enough to match path to target (and vice versa),
but BSD make is not.
GnuPG-bug-id: 3056
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* src/gpgme.c (gpgme_set_ctx_flag, gpgme_get_ctx_flag): New flag
"auto-key-retrieve".
* src/context.h (gpgme_context): New field auto_key_retrieve.
* src/engine-backend.h (struct engine_ops): Add arg auto_key_retrieve
to field 'decrypt'.
* src/engine-gpg.c (gpg_decrypt): Add arg auto_key_retrieve and pass
option --auto-key-retrieve to gpg. Adjust all callers.
(gpg_verify): Ditto.
* src/engine-gpgsm.c (gpgsm_decrypt): Add dummy arg auto_key_retrieve.
* src/engine-uiserver.c (uiserver_decrypt): Ditto.
* tests/run-verify.c (main): Add option --auto-key-retrieve.
--
This makes the --auto-key-retrieve option available in the GPGME API.
Test plan:
Run
GPGME_DEBUG=9:out tests/run-verify SIGNEDFILE
with and without its new option --auto-key-retrieve and check in the
trace stored in "out" whether --auto-key-retrieve was passed to gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpg/t-gpgconf.c (main): Fix warnings.
* src/engine-gpgconf.c (struct gpgconf_config_dir_s): New struct.
(gpgconf_config_dir_cb, gpgconf_conf_dir) Use it to fix warning.
Signed-off-by: Marcus Brinkmann <mb@g10code.com>
* tests/gpgsm/Makefile.am (gpgsm.conf): Add agent-program directive.
* tests/start-stop-agent: Update agent-program directive.
--
Update the 'agent-program' configuration directive to point to the
same agent that we are starting. Previously, it was possible that a
different agent was started if 'make check' was run with a different
PATH.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgsm/Makefile.am (check-local): Drop rule and the dependency
on it.
--
Previously, the test environment was created during 'make check'.
Nowadays we create it using 'BUILT_SOURCES' during 'make all'. Drop
remnant of the previous method.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/tests/Makefile.am: Kill all previously running daemons
before creating the private key store.
* lang/qt/tests/Makefile.am: Likewise.
* tests/gpg/Makefile.am: Likewise.
* tests/gpgsm/Makefile.am: Likewise.
--
Now that the daemons sockets are no longer created in the GNUPGHOME,
we cannot rely on cleaning the build directory to make sure they are
shut down. Therefore, we explicitly kill any running daemons when
creating the test environment.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/tests/Makefile.am: Create test environment as part of
'make all'.
* tests/gpg/Makefile.am: Make sure the private keystore is created
first.
* tests/gpgsm/Makefile.am: Create test environment as part of
'make all'. Make sure the private keystore is created
first.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpg/Makefile.am: Use BUILT_SOURCES instead of check-local
and initial.test.
* lang/qt/tests/Makefile.am: Ditto.
--
This fixes "make dist" failure when source tree is clean:
git clean -dxf
autoreconf -ivf
./configure
make dist
BUILT_SOURCES should be used when file as generated without explicit
dependency. The check-local is all-am dependency, this means that it
will be resolved also in "make dist".
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
* tests/gpg/Makefile.am (tests_unix): Add 't-thread-keylist' and
't-thread-keylist-verify'.
(c_tests): Drop them here.
--
The tests use pthreads and we suspect problems with MinGW's wrappers.
Signed-off-by: Justus Winter <justus@g10code.com>
* src/gpgme.h.in (GPGME_ENCRYPT_WRAP): New const.
(gpgme_decrypt_flags_t): New enum.
(GPGME_DECRYPT_VERIFY): New const
(GPGME_DECRYPT_UNWRAP): New const
(gpgme_op_decrypt_ext_start): New func.
(gpgme_op_decrypt_ext): New func.
* src/decrypt-verify.c (gpgme_op_decrypt_ext_start): New.
(gpgme_op_decrypt_ext): New.
(decrypt_verify_start): Add arg FLAGS. Replace call to
engine_op_decrypt_verify by the plain decrypt with the flag set.
(gpgme_op_decrypt_verify_start): Pass the flag.
(gpgme_op_decrypt_verify): Pass the flag.
* src/decrypt.c (decrypt_start): Rename to ...
(_gpgme_decrypt_start): this. Add arg FLAGS. Pass FLAGS to
engine_op_decrypt.
(gpgme_op_decrypt_start): Adjust for chnage pass 0 for FLAG.
(gpgme_op_decrypt_start): Ditto.
* src/engine.c (_gpgme_engine_op_decrypt_verify): Remove.
(_gpgme_engine_op_decrypt): Add arg FLAGS.
* src/gpgme.def, src/libgpgme.vers: Add new functions.
* src/engine-backend.h (struct engine_ops): Remove member
'decrypt_verify'. Add FLAGS to 'decrypt'. Adjust all initialization.
* src/engine-uiserver.c (uiserver_decrypt): Remove.
(uiserver_decrypt_verify): Remove.
(_uiserver_decrypt): Rename to ...
(uiserver_decrypt): this. Replace arg VERIFY by new arg FLAGS.
* src/engine-gpg.c (gpg_decrypt): Support GPGME_DECRYPT_UNWRAP.
(gpg_encrypt): Support GPGME_ENCRYPT_WRAP.
* tests/run-decrypt.c (main): New option --unwrap.
* tests/run-encrypt.c (main): New option --wrap.
--
Manual testing of that wrap/unwrap feature can be done this way:
./run-encrypt --verbose --key Alice /etc/motd > x
./run-decrypt --verbose --unwrap x > y
./run-encrypt --verbose --key Bob --wrap y > z
1. The message was first encrypted to Alice.
2. Alice decrypts the message receiving a valid OpenPGP message.
3. Alice encrypt that message to Bob
This will also work with encrypted and signed messages; the signature
will be kept intact during re-encryption. Requires GnuPG 2.1.12.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/dirinfo.c (WANT_GPG_WKS_CLIENT_NAME): New const.
(struct dirinfo): New field 'gpg_wks_client_name'.
(get_gpgconf_item): Build it on demand.
(gpgme_get_dirinfo): New value "gpg-wks-client-name" for WHAT.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (GPGME_ENCRYPT_THROW_KEYIDS): New flag.
* src/engine-gpg.c (gpg_encrypt): Implement flag
(gpg_encrypt_sign): Implement flag.
* tests/run-encrypt.c (main): New option --throw-keyids.
--
It would be nice to also selectively hide recipients (that is gpg
--hidden-recipient) but our API does not ye allow this because it is
based on key objects. A possible way to implement that would be a API
to set processing flags into a key but this is complicated due to the
reference counting and thus the possibility that a key object is used
by different context.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/start-stop-agent: Do not create 'gpg-agent.conf' if it does
not exist.
Fixes-commit: 16b202d999
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/tests/Makefile.am (gpg-agent.conf): Do not hard-code the
option. This breaks gpg-agent from GnuPG 2.0.
* tests/start-stop-agent: Rather, check if the option is supported and
add it to the configuration if it is.
GnuPG-bug-id: 3008
Fixes-commit: bbf19124bb
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpg/t-gpgconf.c (main): Reduce iterations to 10.
* tests/gpg/t-thread-keylist-verify.c,
tests/gpg/t-thread-keylist.c (THREAD_COUNT): Reduce to 10.
--
While these tests tested for race conditions a smaller number
of iteration should still show problems if they are run on
multiple systems and regulary. While the 100 Thread count in
the t-thread tests could lead to resource problems.
* tests/start-stop-agent: Don't autostart agent on --stop and
running check. Use --debug-quick-random when starting.
--
This should speed up the tests especially on low entropy systems.
Possibly fixing a hang on pythons op_genkey test in the Launchpad
build enviorment (see launchpad issue 1655298)
* tests/gpg/t-gpgconf.c: Include support functions.
(fail_if_err): Remove macro.
(init_gpgme): Remove function.
(lookup): New function.
(main): Update some values and verify that the changes are applied.
* tests/gpg/t-support.h (test): New assert-like macro.
GnuPG-bug-id: 2881
Signed-off-by: Justus Winter <justus@g10code.com>
* src/engine-gpg.c (struct engine_gpg): New field
override_session_key.
(gpg_release): Free that field.
(gpg_decrypt): With gnupg 2.1.16 use --override-session-key-fd.
* tests/run-decrypt.c (main): Fix setting over the override key.
--
Note that this works only with gnupg 2.1.16 and later.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpgme.texi: Document requirements of verifying that it is OK to
use session_key.
* tests/run-decrypt.c: Ensure that we fail if we're unable to access
the session key, so that we do not violate the guidance above.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Changed the description
-@code{gpgme_set_ctx_flag (ctx, "export-session-key")} returns
-@code{GPG_ERR_NO_ERROR} or @code{gpgme_get_ctx_flag (ctx,
-"export-session-key")} returns @code{"1"}.
+@code{gpgme_set_ctx_flag (ctx, "export-session-key")} returns success
+or @code{gpgme_get_ctx_flag (ctx, "export-session-key")} returns true
+(non-empty string).
to get gpgme_get_ctx_flag for boolean values in sync with its own
description.
Note that I don't agree with the above suggestion but it does not
really harm to have it in the man page.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.c (gpgme_set_ctx_flag): Add flags "export-session-key" and
"override-session-key".
(gpgme_get_ctx_flag): Ditto.
(gpgme_set_export_session_keys): Remove.
(gpgme_get_export_session_keys): Remove.
* src/gpgme.def, src/libgpgme.vers: Remove them.
* src/context.h (struct gpgme_context): Add field
override_session_key.
* src/decrypt-verify.c (decrypt_verify_start): Pass
override_session_key value to the engine.
* src/decrypt.c (decrypt_start): Ditto.
* src/engine.c (_gpgme_engine_op_decrypt): Ditto.
(_gpgme_engine_op_decrypt_verify): Ditto.
* src/engine-backend.h (struct engine_ops): Extend DECRYPT and
DECRYPT_VERIFY_START with override_session_key.
* src/engine-uiserver.c (_uiserver_decrypt): Add stub arg
override_session_key.
(uiserver_decrypt): Ditto.
(uiserver_decrypt_verify): Ditto.
* src/engine-gpgsm.c (gpgsm_decrypt): Ditto.
* src/engine-gpg.c (gpg_decrypt): Add arg override_session_key and set
corresponding gpg option.
* tests/run-decrypt.c (print_result): Print the session key if
available.
(main): Add options --export-session-key and --override-session-key.
--
To keep the number of context manipulation functions at bay, this
patches removes the just added gpgme_set_export_session_keys and
gpgme_get_export_session_keys by flags for the generic context
function.
The patch also implements the --override-session-key feature.
GnuPG-bug-id: 2754
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (gpgme_get_ctx_flag): New.
* src/gpgme.c (gpgme_set_ctx_flag): Move down the file and add a trace
statement.
(gpgme_get_ctx_flag): New.
* src/gpgme.def, src/libgpgme.vers: Add new interface.
Signed-off-by: Werner Koch <wk@gnupg.org>
* gpg/t-thread-keylist-verify.c,
gpg/t-thread-keylist.c: Reduce threads to 100
--
Due to the limit of FD_SETSIZE the
number of parallel threads is limited. So some systems
run into this problem when running the testsuite.
* tests/gpg/t-thread-keylist-verify.c (start_keylist): Mark
arg as unused. Release context.
(start_verify): Ditto.
(main): Mark args as unused.
* tests/gpg/t-thread-keylist.c (start_keylist): Mark
arg as unused. Release context.
(main): Mark args as unused.
* configure.ac: Require libgpg-error 1.17. No longer
check for pthread.
* doc/gpgme.texi: Document removed neccessity for thread
safe gpgme flavours.
* src/sema.h (DEFINE_GLOBAL_LOCK),
(DEFINE_STATIC_LOCK, INIT_LOCK, DECLARE_LOCK)
(DESTROY_LOCK, LOCK, UNLOCK): Change to gpgrt equivalents.
* src/posix-sema.c, src/w32-sema.c: Removed.
* src/Makefile.am: Remove libpthread and
Update accordingly.
* src/ath.c, src/ath.h (ath_mutex_init)
(ath_mutex_destroy, ath_mutex_lock, ath_mutex_unlock): Removed.
* src/ath.h (ATH_MUTEX_INITIALIZER): Removed.
* src/version.c (do_subsystem_inits): sema_subsystem_init is
no longer required.
* tests/gpg/Makefile.am: Add new threading tests.
(t_thread1_LDADD, t_cancel_LDADD):
Use just gpgme.
* tests/gpg/t-thread-keylist-verify.c,
tests/gpg/t-thread-keylist.c: New.
* src/gpgme-config.in: Use -lgpgme for thread-model pthread.
--
Using gpgrt locks instead of pthread locks removes
the neccessity to link pthread directly to gpgme and
have a different, thread safe flavor of gpgme. Now
gpgme is thread-safe if the conditions mentioned
in the doc are met.
As the cpp bindings linked against libgpgme
and not libgpgme-pthread this fixes threading problems
with them.
libgpgme-pthread is removed but gpgme-config still supports
--thread=pthread for compatibility with find scripts.
* lang/cpp/src/key.cpp: Include <strings.h> for 'strcasecmp'.
* tests/gpg/t-cancel.c: Include <sys/select.h> for 'fd_set' and
friends.
Signed-off-by: Justus Winter <justus@g10code.com>
* THANKS, doc/ChangeLog-2011, tests/ChangeLog-2011,
tests/gpg/geheim.txt: convert from iso 8859-1 to utf-8.
* lang/qt/src/dataprovider.cpp, lang/qt/src/qgpgmerefreshkeysjob.cpp,
lang/qt/src/qgpgmesecretkeyexportjob.cpp: replace U+FFFD REPLACEMENT
CHARACTER with proper U+00E4 LATIN SMALL LETTER A WITH DIAERESIS.
--
Note that src/versioninfo.rc.in is still ISO-8859-1. I don't know
whether Windows will properly handle UTF-8 in this file or not, so i
have not touched it.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* lang/python/tests/Makefile.am (./pubring-stamp): Use --batch with
GPG to avoid Pinentries during import when using GnuPG >= 2.1.
Replace touch by echo.
* tests/gpg/Makefile.am (./pubring-stamp): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (gpgme_interact_cb_t): New.
(GPGME_INTERACT_CARD): New.
(gpgme_op_interact_start, gpgme_op_interact): New.
* src/libgpgme.vers, src/gpgme.def: Add new functions.
* src/edit.c (op_data_t): Rename fnc to fnc_old and change users. Add
fnc.
(edit_status_handler): Call old or new callback.
(command_handler): Ditto.
(interact_start): New.
(gpgme_op_interact_start, gpgme_op_interact_start): New.
* src/status-table.c (_gpgme_status_to_string): New.
* tests/gpg/t-edit.c (edit_fnc): Rename to interact_fnc and change
type of STATUS. Use gpgme_io_writen.
(main): s/gpgme_op_edit/gpgme_op_interact/.
--
This change will eventually allow us to remove all those status codes
from gpgme.h.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/engine-backend.h (engine_ops): Change prototype of genkey.
* src/engine-gpgsm.c (gpgsm_genkey): Change accordingly.
* src/engine-gpg.c (gpg_genkey): Change it to a dispatcher.
(gpg_createkey_from_param): New for the old functionality.
(gpg_createkey_legacy): New. Stub for now.
(gpg_createkey): New.
(gpg_addkey): New. Stub for now.
(gpg_adduid): New. Stub for now.
* src/engine.c (_gpgme_engine_op_genkey): Add new args.
* src/genkey.c (op_data_t): Add field ERROR_CODE.
(parse_error): New.
(genkey_status_handler): Parse ERROR status line.
(genkey_start): Use NULL/0 for the new args.
(createkey_start): New.
(gpgme_op_createkey_start, gpgme_op_createkey): New.
* src/gpgme.def, src/libgpgme.vers: Add gpgme_op_createkey_start and
gpgme_op_createkey.
* src/gpgme.h.in (_gpgme_op_genkey_result): Add fields PUBKEY and
SECKEY.
(GPGME_CREATE_SIGN): New.
(GPGME_CREATE_ENCR): New.
(GPGME_CREATE_CERT): New.
(GPGME_CREATE_AUTH): New.
(GPGME_CREATE_NOPASSWD): New.
(GPGME_CREATE_SELFSIGNED): New.
(GPGME_CREATE_NOSTORE): New.
(GPGME_CREATE_WANTPUB): New.
(GPGME_CREATE_WANTSEC): New.
(GPGME_CREATE_FORCE): New.
* tests/run-genkey.c: New.
* tests/Makefile.am (noinst_PROGRAMS): Add it.
--
This function uses the new --quick-gen-key API of gpg. A limited
compatibility mode to use older gpg versions and gpgsm will eventually
be provided. Not all flags are currently implemented.
./run-genkey --unprotected --force test@example.com
Create a new standard key with the given user id. --force is used to
allow creating more than one key with that user id in the keyring.
./run-genkey --unprotected --force \
test@example.com default default 2145826800
Creates a new standard key with an expiration date of 2037-12-31.
./run-genkey --unprotected --force \
test@example.com future-default default 2145826800
Create a standard key using the fugure default algorithms.
Signed-off-by: Werner Koch <wk@gnupg.org>
* lang/python/tests/t-sig-notation.py: Only check the critical flag
when GnuPG >= 2.1.13 is used.
* tests/gpg/t-sig-notation.c: Likewise.
Fixes-commit: c88c9ef3
Signed-off-by: Justus Winter <justus@g10code.com>
* src/gpgme.h.in (struct _gpeme_tofu_info): Rename FIRSTSEEN to
SIGNFIRST and LASTSEEN to SIGNLAST. Add ENCRFIST and ENCRLAST.
* src/keylist.c (parse_tfs_record): Parse to ENCRFIRST and ENCRLAST.
* src/verify.c (parse_tofu_stats): Ditto.
* tests/run-keylist.c (main): Adjust and print encrypt stats.
* tests/run-verify.c (print_result): Ditto.
* lang/cpp/src/tofuinfo.h (TofuInfo): Rename firstSeen to signFirst
and lastSeen to signLast. Add encrCount, encrFirst and encrLast.
* lang/cpp/src/tofuinfo.cpp (encrCount, encrFirst, encrLast): New.
--
The latest GnuPG commits have the needed changes but we also allow the
use of currently released GnuPG version.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (struct _gpgme_signature): Remove field 'tofu'. Add
field 'key'.
(struct _gpgme_key): Add field 'fpr'.
(struct _gpgme_user_id): Add field 'tofu'.
(struct _gpgme_tofu_info): Remove fields 'address' and 'fpr'.
* src/key.c (gpgme_key_unref): Release TOFU and FPR.
* src/keylist.c (keylist_colon_handler): Store the fingerprint of the
first subkey also in KEY.
* src/verify.c (release_tofu_info): Remove.
(release_op_data): Release KEY.
(parse_tofu_user): Rewrite for new data structure.
(parse_tofu_stats): Ditto.
(parse_tofu_stats_long): Ditto.
* tests/run-verify.c (print_result): Ditto.
* tests/run-keylist.c (main): Print more fields.
--
TOFU information are now associated with the user ID and not with a
separate object.
Note that this breaks code relying on the former non-released TOFU
feature. The C++ bindings won't work right now.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/engine-gpg.c: Include data.h.
(add_input_size_hint): New.
(gpg_decrypt, gpg_encrypt, gpg_encrypt_sign, gpg_sign)
(gpg_verify): Call new function,
* tests/run-encrypt.c (status_cb): Print to stderr.
(progress_cb): New.o
(main): Add option --progress. Print full-status lines. Provide a
size for the input data.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (gpgme_encrypt_flags_t): New flag
GPGME_ENCRYPT_SYMMETRIC.
* src/engine-gpg.c (gpg_encrypt): Also add --symmetric if the flag
is given.
* NEWS: Mention new flag.
* tests/run-encrypt.c (show_usage): Extend for --symmetric.
(main): Handle --symmetric.
(main): Set passphrase_cb in loopback mode.
(main): Fix encrypt call if no recipients are given.
* tests/gpg/t-encrypt-mixed.c: New.
* tests/gpg/Makefile.am (c_tests): Add new test.
* doc/gpgme.texi: Document new flag.
* src/gpgme.h.in (GPGME_STATUS_NOTATION_FLAGS): New.
* src/status-table.c (status_table): Add new status.
* src/verify.c (parse_notation): Handle flags. Also fix NOTATION_DATA
in case gpg would not percent-escape spaces.
(_gpgme_verify_status_handler): Handle flags.
* tests/run-verify.c (print_result): Print notaion data.
--
Note that this does only work with the soon to be released GnuPG
2.1.13.
* src/gpgme.h.in (gpgme_set_ctx_flag): New prototype.
* src/gpgme.c (gpgme_set_ctx_flag): New.
* src/gpgme.def, src/libgpgme.vers: Add new function.
* src/context.h (struct gpgme_context): Add FULL_STATUS.
* src/decrypt.c (_gpgme_decrypt_status_handler): Do not call the
status callback if FULL_STATUS is set.
* src/genkey.c (genkey_status_handler): Ditto.
* src/passphrase.c (_gpgme_passphrase_status_handler): Ditto.
* src/sign.c (_gpgme_sign_status_handler): Ditto.
* src/engine-backend.h (struct engine_ops): Add SET_STATUS_CB and add
adjust all definitions of that variable.
* src/engine.c (_gpgme_engine_set_status_cb): New.
* src/op-support.c (_gpgme_op_reset): Call this function.
* src/engine-gpg.c (struct engine_gpg): Add fields MON_CB and
MON_CB_VALUE.
(gpg_set_status_cb): New.
(_gpgme_engine_ops_gpg): Register that function.
(read_status): Call the monitor callback.
* src/engine-gpgsm.c (struct engine_gpgsm): Add fields MON_CB and
MON_CB_VALUE.
(_gpgme_engine_ops_gpgsm): Register that function.
(gpgsm_assuan_simple_command): Change first arg to be an engine
context and adjust call callers. Call the monitor callback.
* src/engine-uiserver.c (struct engine_uiserver): Add fields MON_CB
and MON_CB_VALUE.
(_gpgme_engine_ops_uiserver): Register that function.
(uiserver_assuan_simple_command): Change first arg to be an engine
context and adjust call callers. Call the monitor callback.
* tests/run-verify.c (status_cb): New.
(print_result): Print algo names.
(main): Add option --status.
--
This new feature is mainly intended for bug tracking. Having access
to the raw status lines might also be useful for applications, though.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpgme.texi: Document offline mode.
* src/context.h (gpgme_context): Add offline.
* src/engine-backend.h (keylist, keylist_ext): Add engine_flags.
* src/engine.c, src/engine.h (_gpgme_engine_op_keylist): Ditto.
(_gpgme_engine_op_keylist_ext): Ditto.
* src/engine.h (GPGME_ENGINE_FLAG_OFFLINE): New.
* src/engine-gpg.c (gpg_keylist, gpg_keylist_ext): Ditto.
* src/engine-gpgsm.c (gpgsm_keylist): Handle engine_flags.
(gpgsm_keylist_ext): Ditto.
* src/gpgme.c (gpgme_set_offline, gpgme_get_offline): New.
* src/gpgme.def (gpgme_set_offline, gpgme_get_offline): New.
* src/gpgme.h.in (gpgme_set_offline, gpgme_get_offline): New.
* src/libgpgme.vers (gpgme_set_offline, gpgme_get_offline): New.
* src/keylist.c (gpgme_op_keylist_start): Set offline flag.
(gpgme_op_keylist_ext_start): Ditto.
* tests/run-keylist.c (show_usage, main): Add offline argument.
--
The offline engine option was introduced with gpgsm 2.1.6
it is mainly useful for a full keylisting that includes
the certificate validation but does not depend on external
information that could take an indefinite amount of time to
collect.
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* tests/gpgsm/final.test: New.
* tests/gpgsm/initial.test: New.
* tests/gpg/start-stop-agent: Move to ../.
* tests/gpgsm/Makefile.am (TESTS_ENVIRONMENT): Export top_srcdir.
(TESTS): Add intial.test and final.test.
(AM_LDFLAGS): Add -no-install.
(clean-local): Use start-stop-agent
(initial.test): Add dependency.
* tests/gpg/Makefile.am (top_srcdir): Export top_srcdir.
(AM_LDFLAGS): Add -no-install.
(check-local): Depend on pubring-stamp instead of pubring.gpg.
(initial.test): Depend on check-local.
(./pubring-gpg): Replace by rule for ./pubring-stamp.
--
There are also a couple of other changes which should make the tests a
bit more robust and the gpg and gpgsm tests more similar.
The -no-install avoids creating wrappers for test programs, which make
debugging easier.
The dependency on check-local guarantees that its rules are run before
the first test. This is important because conf files are setup by
this rule. Earlier automake versions seem to have run check-local
always before the tests but today the order of execution is not
defined.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.c (gpgme_set_global_flag): Add names "disable-gpgconf",
"gpgconf-name", and "gpg-name".
* src/dirinfo.c (_gpgme_dirinfo_disable_gpgconf): New.
(get_gpgconf_item): Minor debug info change.
* src/posix-util.c (default_gpg_name, default_gpgconf_name): Add vars.
(_gpgme_set_default_gpg_name): New.
(_gpgme_set_default_gpgconf_name): New.
(_gpgme_get_gpg_path, _gpgme_get_gpgconf_path): Use new vars.
(walk_path): Add debug output on failure.
* src/w32-util.c (default_gpg_name, default_gpgconf_name): Add vars.
(replace_slashes): New.
(get_basename): New.
(_gpgme_set_default_gpg_name): New.
(_gpgme_set_default_gpgconf_name): New.
(_gpgme_get_gpg_path, _gpgme_get_gpgconf_path): Use new vars.
* tests/t-engine-info.c (main): Add --verbose and --set-global-flag
options.
--
Note that the Windows part has not been tested.
* configure.ac (NEED_GPG_VERSION, NEED_GPGSM_VERSION)
(NEED_G13_VERSION, NEED_GPGCONF_VERSION): Remove vars and all related
checks. Do not check for any engine version.
(HAVE_ASSUAN): Remove AM conditional.
* src/Makefile.am: Remove separate component vars and always build all
engines but uiserver.
* src/dirinfo.c (WANT_GPGCONF_NAME): New.
(struct dirinfo): Add field gpgconf_name.
(_gpgme_get_default_gpgconf_name): Use WANT_GPGCONF_NAME.
(get_gpgconf_item): Set gpgconf name and adjust for _gpgme_get_*_path
now returning a malloced string.
* src/engine.c (engine_ops): Always init all engines except for
uiserver.
* src/posix-util.c (_gpgme_get_gpgsm_path, _gpgme_get_g13_path):
Remove unused functions.
(walk_path): New.
(_gpgme_get_gpg_path, _gpgme_get_gpgconf_path ): Re-implement using
walk_path.
* src/w32-util.c (_gpgme_get_gpgsm_path, _gpgme_get_g13_path): Remove
unused functions.
(_gpgme_get_gpg_path, _gpgme_get_gpgconf_path): Return a malloced
string.
* src/engine-g13.c (g13_get_req_version): Use a hardwired string with
the required version. This info belongs into this file.
* src/engine-gpg.c (gpg_get_req_version): Ditto.
* src/engine-gpgconf.c (gpgconf_get_req_version): Ditto.
* src/engine-gpgsm.c (gpgsm_get_req_version): Ditto.
* tests/t-engine-info.c: Replace now useless test by an info output.
* tests/gpg/Makefile.am (GPG, GPG_AGENT): Hardwire gpg and gpg-agent.
* tests/gpgsm/Makefile.am (GPGSM): Hardwire gpgsm.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpg/start-stop-agent: New.
* tests/gpg/initial.test: New.
* tests/gpg/final.test: New.
* tests/gpg/Makefile.am (c_tests): New.
(TESTS): Move all to c_tests. Add initial.test, final.test, and
c_tests.
(TESTS_ENVIRONMENT): Add C_ALL=C
(private_keys): New.
(EXTRA_DIST): Add new files.
(./private-keys-v1.d/gpg-sample.stamp): Copy private keys.
(all-local): Depend on gpg-sample.stamp.
* tests/gpg/13CBE3758AFE42B5E5E2AE4CED27AFA455E3F87F: New.
* tests/gpg/13CD0F3BDF24BE53FE192D62F18737256FF6E4FD: New.
* tests/gpg/76F7E2B35832976B50A27A282D9B87E44577EB66: New.
* tests/gpg/7A030357C0F253A5BBCD282FFC4E521B37558F5C: New.
* tests/gpg/A0747D5F9425E6664F4FFBEED20FBCA79FDED2BD: New.
--
GnuPG 2.1 requires that the agent knows the private keys. Thus we
need to install them. The code should still work with GnuPG < 2.1.
To make the whole testing using a agent more robust, the way to start
the agent has also be changed.
* configure.ac: Rename my_foo variables to mym4_foo variables to make
clear that they are processed by m4.
(VERSION_NUMBER): New ac_subst.
(AH_BOTTOM): Add CRIGHTBLURB macro.
(BUILD_REVISION, BUILD_FILEVERSION, BUILD_TIMESTAMP): Change them to
work similar to libgpg-error et al.
* src/versioninfo.rc.in: Remove use of BUILD_NUMBER and get it in line
with gpg-error et al.
* src/version.c (cright_blurb): New.
(gpgme_check_version_internal): Add magic to display the above
information.
* tests/t-version.c (main): Add option --verbose.
