* conf/: New dir.
* configure.ac (AC_CONFIG_HEADER): Move header to conf dir.
* doc/Makefile.am (mkdefsinc): Adjust rule.
* lang/python/Makefile.am (copystamp): Ditto.
--
C++ uses those stupid files without a suffix and thus the new standard
header <version> as included by newer other libc++ versions may
conflict with the VERSION file in out top directory. This change
should solve the problem.
GnuPG-bug-id: 4168
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/Makefile.am: Removed a bit I forgot about.
* Renamed lang/python/docs to lang/python/doc bvecause apparently
automake cares about that too.
* Decided to be extra explicit in the manifest because if I don't then
all sorts of things get deleted ... like lang/python
* Tested on an external linux system just in case my osx workstation
introduces too much weirdness.
Tested-by: Ben McGinnes <ben@adversary.org>
Signed-off-by: Ben McGinnes <ben@adversary.org>
* lang/python/Makefile.am: Attempting to remove the docs/meta
directory did a lot worse than I thought it was doing, so better to
just be sure the documentation is available than destroy the entire
bindings directory.
Tested-by: Ben McGinnes <ben@adversary.org>
Signed-off-by: Ben McGinnes <ben@adversary.org>
* lang/python/Makefile.am: Now that gpg2 has been renamed back to gpg
and gpg1 is semi-deprecated, we should check what the actual gpg
binary is with gpgconf and use that rather than make assumptions per
system.
* Also, it means less worry if gpg3 is ever a thing. (Trust me, I
remember the Python 1 to 2 transition as well as the current 2 to 3
transition). ;)
Signed-off-by: Ben McGinnes <ben@adversary.org>
* configure.ac: Remove PYTHON_VERSIONS subst.
* lang/python/Makefile.am: Use basename of python as builddir prefix.
* lang/python/tests/run-tests.py: Likewise.
--
Two variables needs be at sync PYTHONS and PYTHON_VERSIONS, these may go
out of sync in some cases, for example in Gentoo where default python is
3.4 we get:
PYTHON='/usr/bin/python2'
PYTHONS='/usr/bin/python /usr/bin/python2'
PYTHON_VERSIONS='2.7 3.4'
We can use the basename of the python interpreter to achieve similar
effect without having to sync indexes between these two variables.
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
* lang/python/gpg/version.py.in: Rename to lang/python/version.py.in.
configure.ac: Generate version.py.in in lang/python.
* lang/python/MANIFEST.in: Include version.py explicitly.
* lang/python/gpg: Rename to 'src'.
* lang/python/Makefile.am: Do not copy source files, do not use absolute
directories, support lib64 in uninstall, clean also dist directory, use
symlink for gpg src.
* lang/python/setup.py.in: Use builddir, copy sources into builddir,
copy version.py into module.
--
Simplify build to symlink the gpg sources into builddir instead of
copying. This requires handling of version.py as generated file.
In addition apply some cleanups: Drop the absolution pathes, clean the
dist directory as well, support lib64 for sitelib at uninstall.
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
* lang/python/gpgme-h-clean.py: Delete file.
* lang/python/MANIFEST.in: Adapt accordingly.
* lang/python/Makefile.am (EXTRA_DIST): Likewise.
(COPY_FILES_GPG): Bring variable back.
(copystamp): Copy files.
(clean-local): Delete copied files.
(install-exec-local): Do not create and install list of installed
files.
(uninstall-local): Instead, create some explicit rules to uninstall
the extension.
* lang/python/setup.py.in: Parse arguments. Locate files either in
the source directory, or in the build base directory. Inline the code
from 'gpgme-h-clean.py'. Copy 'helpers.c', add source directory as
include directory.
Fixes-commit: 801d7d8c5d
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/setup.py.in: Generate files within BuildExtFirstHack
adjust build flags at this point instead of global.
* lang/python/Makefile.am: Remove logic of separate source directory per
python version in favor of build directory.
* lang/python/tests/run-tests.py: Adjust build directory location.
--
Generate files into build directory, leaving the source directory clean.
Use the same source directory for multiple python version build. Result
of 'prepare' target is a standard distutil layout that can be used
easily by downstream to build all python targets in-place.
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
* lang/python/Makefile.am: Fix 'prepare' target.
* lang/python/setup.py.in: Use 'abs_top_builddir' instead of guessing
the path.
--
'prepare' will prepare target at PREPAREDIR. The automake integration
will also make use of prepare target. Downstream distributors may
also make use of prepare target.
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
* lang/python/Makefile.am (copystamp): Also copy the setup script, and
link the header files.
(all-local): Use local setup script.
(sdist): Fix Python source distribution creation.
(CLEANFILES): Remove now obsolete files.
(install-exec-local): Use local setup script.
* lang/python/setup.py.in: Adjust relative paths to in-tree files.
Fixes-commit: fe65a26ab5
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/Makefile.am (copystamp): Create one copy per Python
version.
(all-local): Adapt.
(clean-local): Likewise.
(install-exec-local): Likewise.
* lang/python/tests/run-tests.py: Likewise.
--
Currently, we use one copy of the Python module's source to build for
all Python versions. This is problematic, because SWIG writes a
wrapper file into the source tree. Currently, this file works with
both Python 2 and 3, but this is purely by chance.
Improve the situation by creating one copy per Python version so that
SWIG can write version-specific code into each copy.
Signed-off-by: Justus Winter <justus@g10code.com>
This follows weeks of discussion on the gnupg-devel mailing list.
Hopefully it will make it easier for people using Python to use GnuPG
in the future.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* lang/python/Makefile.am: Link to the files.
* lang/python/gpgme.i: Update path.
* lang/python/setup.py.in: Do not add the top builddir to the include
path.
--
To make it easy to build the subpackage using standard tools without
altering environment or CFLAGS, symlink the required artifacts from
source tree into subpackage directory when preparing sources.
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
* lang/python/Makefile.am: Add 'prepare' target.
--
This enables preparing the package using autoconf then build using
distutils as separate stage.
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
* lang/python/Makefile.am: Pass 'top_builddir' to 'setup.py'.
* lang/python/gpgme.i: Include 'config.h'.
* lang/python/helpers.c: Likewise.
* lang/python/helpers.h: Likewise.
* lang/python/setup.py.in: Make sure that 'config.h' can be found.
--
Fixes build on 32 bit platforms with large file support.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/Makefile.am (SUBDIRS): Make current dir fist.
* lang/python/tests/Makefile.am (xcheck): Depend on pubring-stamp.
(CLEANFILES): Remove private-keys-v1.d/gpg-sample.stamp.
(check-local): Remove.
(initial.py): Remove dependency.
(./pubring-stamp): Depend on conf files and the
private-keys-v1.d/gpg-sample.stamp file. Also replace use of
basename.
--
This addresses the problem that two rules might run the private keys
copy rule and due to the files being chmod -w during make discheck the
second process running that rule's cp would get a permission error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* lang/qt/tests/Makefile.am (clean-local): Avoid non-portable "--"
* lang/python/Makefile.am (copystamp): Use well defined cp -R instead
of cp -r.
Signed-off-by: Werner Koch <wk@gnupg.org>
* NEWS: Update.
* configure.ac: Check for multiple Python versions.
* lang/python/Makefile.am: Build and install for both Python versions.
* lang/python/tests/Makefile.am: Test both versions.
* lang/python/tests/run-tests.py: New test runner.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/Makefile.am: Be more careful when cleaning the build
directory, we must not delete the generated file 'pyme/version.py'.
Signed-off-by: Justus Winter <justus@g10code.com>
Avoid the name pygpgme, as this is the name of another popular Python
binding for GPGME.
This commit renames the compiled Python module produced by SWIG.
* lang/python/Makefile.am: Rename the compiled Python module.
* lang/python/gpgme.i: Likewise.
* lang/python/pyme/core.py: Likewise.
* lang/python/pyme/errors.py: Likewise.
* lang/python/pyme/util.py: Likewise.
* lang/python/pyme/version.py.in: Likewise.
* lang/python/setup.py.in: Likewise.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/Makefile.am (EXTRA_DIST, COPY_FILES): Add new file.
* lang/python/gpgme.i: Include new file and add comments.
* lang/python/helpers.c: Include new file.
* lang/python/helpers.h: Move functions we do not need to expose...
* lang/python/private.h: ... here.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/Makefile.am (gpgme_wrap.c): Use '-builtin' to make SWIG
generate builtin types for c types.
* lang/python/gpgme.i (pygpgme_wrap_gpgme_data_t): Adapt slightly.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/Makefile.am: Add the toplevel source directory to CFLAGS
when compiling the bindings so that we can use private header files.
* lang/python/gpgme.i (gpgme_data_t): Rework the object wrapping. Do
not create a Python wrapper object, merely a gpgme_data_t object, and
keep references to buffer objects, if any. If necessary, update the
buffer after the function call.
(pygpgme_wrap_gpgme_data_t): New function.
* lang/python/helpers.c (object_to_gpgme_data_t): Rework object
wrapping. Also wrap objects implementing the buffer protocol.
* lang/python/helpers.h (object_to_gpgme_data_t): Update prototype.
(pygpgme_wrap_gpgme_data_t): New prototype.
* lang/python/tests/t-idiomatic.py: Demonstrate this.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/Makefile.am: Copy the README file.
* lang/python/README: Rename, convert to org, and update.
* lang/python/pyme/__init__.py: Move license out of the docstring,
update docstring.
* lang/python/pyme/core.py: Add and update docstrings.
Signed-off-by: Justus Winter <justus@g10code.com>
* configure.ac: Generate 'setup.py' and 'version.py'.
* lang/python/Makefile.am: Use generated setup script.
* lang/python/pyme/version.py: Turn it into a template, and get
version information from the build system. Also drop some variables.
* lang/python/setup.py: Likewise. This way we can avoid importing the
version module, which is frowned upon and actually caused a problem.
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/Makefile.am: Pass CFLAGS to python build system.
* lang/python/helpers.c (pyPassphraseCb): Use correct type for length.
(pygpgme_data_new_from_cbs): Drop unused variable.
Signed-off-by: Justus Winter <justus@g10code.com>
instead of calling gpg-error-config.
This is useful when configuring with --with-gpgerror-prefix
because then GPG_ERROR_CONFIG contains the correct
/path/to/bin/gpg-error-config whereas calling gpg-error-config
directly would look in the user's PATH (and not in the prefix
where gpg-error-config was installed).
Signed-off-by: Justus Winter <justus@gnupg.org>
* configure.ac: Make Python bindings configurable, add new Makefile.
* lang/python/Makefile.am: New file.
* lang/python/setup.py: Integrate into the build system.
* m4/ax_pkg_swig.m4: New file from the autoconf archive.
* m4/m4_ax_swig_python.m4: Likewise.
Signed-off-by: Justus Winter <justus@gnupg.org>
