* src/engine-assuan.c (inquire_cb): Implement returning data.
* tests/opassuan/t-command.c (inq_cb): Send some test data.
--
The old code only allowed to send an empty response which was good
enough for scdaemon's KNOWNCARDP inquire but not to send actual data.
A quick test using a test smartcard might be
./t-command 'scd setattr --inquire PRIVATE-DO-1'
and then reading the data back using
gpg-connect-agent 'scd getattr PRIVATE-DO-1' /bye
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/genkey.c (setexpire, gpgme_op_setexpire_start,
gpgme_op_setexpire): Move to ...
* src/setexpire.c: New.
* src/Makefile.am (main_sources): Add that file.
* src/context.h (ctx_op_data_id_t): Add OPDATA_SETEXPIRE.
* lang/qt/tests/t-various.cpp (testSetExpire): Test error handling.
--
Errors (and failures) emitted via status-fd need to be handled
explicitly, i.e. we need to provide an appropriate status handler with
corresponding op_data_t. Additionally, we need to set a passphrase
command handler if a passphrase callback is set in the context, e.g.
during tests.
GnuPG-bug-id: 4395
* src/gpgme.h.in (gpgme_op_setexpire_start, gpgme_op_setexpire): New.
* src/libgpgme.vers, src/gpgme.def: Add new functions.
* src/genkey.c (setexpire): New.
(gpgme_op_setexpire_start, gpgme_op_setexpire): New.
* src/engine.h, src/engine.c: (_gpgme_engine_op_setexpire): New.
* src/engine-backend.h (engine_ops): Add 'setexpire' and adjust all
engine initializers.
* src/engine-gpg.c (gpg_setexpire): New.
(_gpgme_engine_ops_gpg): Set setexpire to gpg_setexpire.
* doc/gpgme.texi: Document new functions.
* tests/run-genkey.c: Add option --setexpire.
--
This extends GPGME to support the --quick-set-expire command
added by GnuPG 2.1.22. This allows changing subkeys expiry
date without going through the editinteractor interface.
Co-authored-by: Andre Heinecke <aheinecke@gnupg.org>
GnuPG-bug-id: 4999
* src/export.c (export_start): Allow that mode.
--
The test tools uses gpgme_op-export_ext and thus did not caught it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in: Clarify that the trustlist function should not be
used.
* src/engine.c (_gpgme_engine_op_trustlist): Always return an error.
* src/engine-backend.h (struct engine_ops): Remove trustlist member.
* src/engine-gpg.c (gpg_trustlist): Remove.
(struct engine_ops): Remove that member. Also in all other engines.
* tests/gpg/t-trustlist.c: Remove.
* lang/python/tests/t-trustlist.py: Remove.
--
This never worked in reality because the required feature has been
removed from GnuPG version 1.3.2 soon after introduction of this
feature in gpgme - 17 years ago. It was anyway marked as
experimental. We keep the API and ABI, though.
GnuPG-bug-id: 4834
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/verify.c (parse_trust): Fix detection of "chain" keyword.
--
Fixes-commit: da6f3dc0c5
from 2007 shortly after introducing this. I doubt that this info has
ever been used (it is for qualified signatures, which are only
supported using the legacy German RegTP rules for them which were soon
overturned by the commercial CAs).
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/Makefile.am (gpgme_w32_extra_libs): New.
(libgpgme_la_LIBADD, libgpgme_glib_la_LIBADD): Use it.
--
Since w32-io.c directly uses functions from ws2_32 it should
not rely on libgpg-error to pull in this dependency.
* src/engine-gpg.c (gpg_keylist_build_options): Send --with-keygrip
if --with-secret is used.
--
Since GnuPG 2.2.19 the keygrip was not anymore send if only
--with-secret was used in a public key listing. Given that
--with-secret requires computation of the keygrip anyway, there is no
point in not requesting the keyrip in this case.
GnuPG-bug-id: 4820
* src/Makefile.am (gpgme_tool_LDADD): Add @GPG_ERROR_LIBS@.
--
Since gpgme-tool uses gpg_strerror, it should be linked
to -lgpg-error.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* src/posix-util.c (find_executable): New.
(walk_path_str): Factored out from walk_path.
(walk_path): Replaced by find_executable.
(_gpgme_get_gpg_path, _gpgme_get_gpgconf_path): Use find_executable.
--
This should help to locate GnuPG on MacOS systems where
it is not part of the PATH environment variable and
should reduce the need to have fixed path known
at GPGME compile time.
mailvelope/issue699
* src/gpgme.h.in (struct _gpgme_user_id): Add field 'uidhash'.
* src/key.c (gpgme_key_unref): Free it.
* src/keylist.c (keylist_colon_handler): Set it.
* tests/run-keylist.c (main): Print it.
--
The uidhash value is part of gpg's output since the year 2005. This
now adds support to gpgme. The application for uidhash is to select
a user id in an edit interactor: Instead of giving the number of the
user id, the uidhash value can be be used to avoid tracking the user
id numbers.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/engine-gpg.c (gpg_decrypt): only send --no-keyring when we are
not verifying.
--
Without this change, the signature verification would fail. This
problem was introduced in bded8ebc59 in
an attempt to avoid an error when *not* verifying. Clearly more test
suite coverage is needed to avoid introducing this sort of problem in
the future.
GnuPG-bug-id: 3464
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* src/keylist.c (keylist_colon_handler): Do not clear
out the tmp_uid when a subpacket line is encountered.
--
When the uid is cleared no more signatures following
the subpacket are parsed, so we now no longer clear
it when a subpacket is encountered.
* src/context.h (gpgme_context): Add new flag for extended-edit.
* src/engine-gpg.c (append_args_from_sig_notations): Add flags to
control the kind of notations.
(gpg_edit): Respect extended-edit and notations.
(gpg_encrypt_sign, gpg_sign): Update call to
append_args_from_sig_notations.
* src/gpgme.c (gpgme_set_ctx_flag, gpgme_get_ctx_flag): Support
extended-edit.
* NEWS, doc/gpgme.texi: Mention extended-edit.
--
This provides a way to get the extended key-edit interface without
breaking bad state machines that rely on the current command flow.
A use case for this is to enable multiple local signatures, which
can be used together with annotations for:
GnuPG-Bug-Id: T4734
* src/engine-gpg.c (build_argv): Properly check for all
arguments and allocate memory for them.
--
This fixes a potential buffer overflow which could be created
by using unusual and partially contradictory options.
Like offline and auto-key-locate together while
using ignore-mdc-error.
As the list of arguments should not be user controlled the
impact of this is very low.
To ensure that this does not happen in the future an
assert is also added with this patch.
* src/debug.c (_gpgme_debug_buffer): Switch between two output
formats.
--
The new format is much more practical than the bunch of hex digits
followed by just 16 ascii chars. To get the old behaviour use a debug
level of 10.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/posix-io.c (_gpgme_is_fd_valid): New out-commented function.
--
This code is sometimes useful to track down invalid file descriptors.
We keep it commented in the code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/wait.c (_gpgme_run_io_cb): Fix return code.
--
The function needs to return an gpg_error_t and not ERRNO.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/debug.c (_gpgme_debug): Take better care of NULL userinfo.
(_gpgme_debug_end): Rework.
(_trace_sysres): Print ERRNO and not the supplied RES.
--
The TRACE_SYSRES patch fixes
Regression-due-to: 7a1e7006d0
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/debug.c (_gpgme_debug): Add arg LINE. Chnage all callers.
(_gpgme_debug_begin): Remove.
* src/debug.h (TRACE_SEQ): Use the LINE arg of _gpgme_debug.
--
This includes chnages to always print fds in decimal as weel as
tweaking the TARCE_SEQ function to make use of the new machinery.
The standard 'tag' can now always be NULL and no tag information will
be printed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/debug.c (debug_lock): Remove. Also remove all users.
(_gpgme_debug): Use gpgrt_bsprintf to prepare the output and finally
print using standard fprintf. Reformat to prefix to be narrower.
--
Note that the locks are now implicitly done using the systems stdio.
The threadid is now printed with 4 digits in hex and thus without the
angle brackets and the 0x. However it is still a hex number even if it
may look like an octal number. The hex letters are uppercase to make
searching in locks easier iff the threadid happens to have a letter in
it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/cJSON.c: Include stdint.h.
(parse_number): Avoid overflob in SUBSCALE and cap integer values.
--
GnuPG-bug-id: 4330
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/engine-gpg.c (append_args_from_recipients_string): Detect bad
options.
* src/engine-gpgsm.c (set_recipients_from_string): Implement option
parsing.
--
The only option we actually implement is "--" but the code layout is
now very simlar to engine-gpg and can easily be extended if ever
needed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/engine-gpgsm.c (gpgsm_encrypt): Fix argument check.
--
It is pretty obvious thar the string based new encrypt function has
never been tested for S/MIME. The fix was easy. A followup patch
will extend it to allow for keywords in the future.
GnuPG-bug-id: 4556
Fixes-commit: a1f76b3b54
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/engine-gpgsm.c [!USE_DESCRIPTOR_PASSING] (gpgsm_new): Remove
last call to _gpgme_io_set_close_notify.
--
It is called just after the code in question for all cases.
GnuPG-bug-id: 4456
Fixes-commit: dd21ec997c
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* src/w32-util.c (_gpgme_access): Respect mode parameter.
(_gpgme_create_process_utf8): Convert startupinfo, too.
--
This both did not show up in testing as we only use
mode F_OK and STARTUPINFOA is basically the same as
STARTUPINFOW.
Fixes commit: a82e3a0ae5
GnuPG-Bug-Id: T4453
* src/dirinfo.c (get_gpgconf_item): Use _gpgme_access.
* src/posix-util.c (_gpgme_access): Add forward to normal access.
* src/sys-util.h (_gpgme_access): New for posix and w32.
* src/w32-io.c (_gpgme_io_spawn): Use _gpgme_crate_process_utf8.
* src/w32-util.c (utf8_to_wchar, utf8_to_wchar0): The usual w32 conv.
(find_program_in_dir): Use _gpgme_access.
(find_program_at_standard_place): Use wchar API and convert to UTF-8.
(_gpgme_access): Convert UTF-8 to wchar and use wchar API.
(_gpgme_create_process_utf8): Convert UTF-8 to wchar and use wchar API.
--
While we should not say that we have full support for unicode path
installations of GnuPG, this ensures that GPGME works if GPGME
itself is installed in a unicode path. e.g.: Libreoffice supports
this.
GnuPG-Bug-Id: T4453
Based on a patch provided by Egor Pugin. Thanks.
* src/w32-io.c (_gpgme_io_spawn): Show MessageBox only once.
--
This prevents multiple message boxes from showing when
the GPGME installation is unworkable.
GnuPG-Bug-Id: T4453
* src/debug.c (_gpgme_debug): Use gpgrt_vasprintf instead of
vfprintf to have a more portable format.
--
This fixes crashes on Windows because "%zu" is used which
is not natively supported on Windows but which gpgrt supports.
* src/assuan-support.c (my_spawn): Fix using strtoul for
a long.
--
This was commented on in129def87b262 and is correct.
It is signed here to better handle cases where an
invalid handle value (-1) would be passed.
* src/assuan-support.c (my_spawn): Add hack to
mark the logger fd for w32spawn translation.
--
The w32 spawn code needs to modify argv with
an updated fd that matches the real id
in the spawned process.
It uses spawn_fd_item_s.arg_loc for that.
We hack it here so that the arg_loc is set
for gpgsm's logger-fd without changing
the assuan API.
GnuPG-Bug-Id: T4426
* src/engine-gpgsm.c (struct engine_gpgsm): Add fields diag_cb and
diagnostics.
(close_notify_handler): Close the diag fd on status fd close.
Handle diag close.
(gpgsm_cancel): Handle diag.
(gpgsm_release): Free DIAGNOSTICS.
(gpgsm_new): Support the diag feature.
(start): Set a handler for the diag fd.
(gpgsm_getauditlog): Support GPGME_AUDITLOG_DIAG.
--
Co-authored-by: Andre Heinecke <aheinecke@gnupg.org>
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/cJSON.c (MAX_DEPTH): New. Maximum recursion depth.
(parse_value, parse_array, parse_object): Carry and check
depth argument.
(cJSON_ParseWithOpts): Initialize depth.
--
This fixes a stack overflow if we get weird recursive
json data.
GnuPG-Bug-Id: T4331
* src/w32-util.c (_gpgme_get_gpgconf_path): Add NULL top strconcat.
--
Fortunately this is called early and the stack like cleared out so
that we have not seen wrong behaviour until now. We should really fix
all these annoying HANDLE/int cast warnings and alike so that real
bugs are not drowned by them.
GnuPG-bug-id: 4369
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme-json.c (subkey_to_json): here
--
Avoid Windows ugliness of allowing different CRTs in the same
process.
Fixes-commit: 7f24233719
Signed-off-by: Werner Koch <wk@gnupg.org>
