* lang/qt/src/QGpgmeConfig-w32.cmake.in.in,
lang/qt/src/QGpgmeQt6Config-w32.cmake.in.in: Get paths to check from
the target properties.
--
This avoids the error present in an older version where the files to
check used the correct path, but a wrong path of the DLL was set in the
target properties.
* lang/qt/src/QGpgmeConfig-w32.cmake.in.in: Fix typos in variable names.
--
Because of those typos the loop over the files to check was an empty
loops and therefore the wrong name of the DLL was never noticed.
* lang/qt/src/decryptverifyarchivejob.cpp,
lang/qt/src/decryptverifyarchivejob.h (DecryptVerifyArchiveJob): Add
member functions setInputFile, inputFile.
* lang/qt/src/decryptverifyarchivejob_p.h
(DecryptVerifyArchiveJobPrivate): Add member m_inputFilePath.
* lang/qt/src/qgpgmedecryptverifyarchivejob.cpp (decrypt_verify): Move
creation of indata to decrypt_verify_from_io_device.
(decrypt_verify_from_io_device, decrypt_verify_from_file_name): New.
(QGpgMEDecryptVerifyArchiveJob::start): Use
decrypt_verify_from_io_device instead of decrypt_verify.
(QGpgMEDecryptVerifyArchiveJobPrivate::startIt): Start the job with the
values from member variables.
* lang/qt/tests/run-decryptverifyarchivejob.cpp (createInput): Remove.
(main): Remove creation of input. Make the job read the archive directly
from the given archive name.
--
This makes it possible to tell gpgtar to read the signed/encrypted
archive directly from a specified file bypassing GpgME's Data IO.
GnuPG-bug-id: 6530
* src/engine-gpg.c (add_file_name_arg_or_data): New.
(gpg_decrypt): Use add_file_name_arg_or_data instead of add_data for the
ciphertext.
(gpg_verify): Use add_file_name_arg_or_data instead of add_data for the
signature and the signed text.
* tests/run-decrypt.c (show_usage): New option --direct-file-io.
(main): Parse new option. If option is given, then don't open input
file, create simple data object instead of data object from stream and
set input file name on input data.
* tests/run-verify.c (show_usage): New option --direct-file-io.
(main): Parse new option. If option is given, then don't open input
files, create simple data objects instead of data objects from stream
and set input file names on input data objects.
--
This change makes it possible to tell gpg (and gpgtar) to read the
input (i.e. the signed/encrypted data or the signature or the created
archive) directly from the files with given file names instead of from
streams piped through GpgME's Data IO.
GnuPG-bug-id: 6530
* lang/qt/src/encryptarchivejob.cpp, lang/qt/src/encryptarchivejob.h
(EncryptArchiveJob): Add member functions setRecipients, recipients,
setInputPaths, inputPaths, setOutputFile, outputFile,
setEncryptionFlags, encryptionFlags.
* lang/qt/src/encryptarchivejob_p.h (EncryptArchiveJobPrivate): Add
members m_recipients, m_inputPaths, m_outputFilePath, m_encryptionFlags.
* lang/qt/src/qgpgmeencryptarchivejob.cpp (encrypt): Move creation of
outdata to encrypt_to_io_device.
(encrypt_to_io_device, encrypt_to_filename): New.
(QGpgMEEncryptArchiveJob::start): Use encrypt_to_io_device instead of
encrypt.
(QGpgMEEncryptArchiveJobPrivate::startIt): Start the job with the
values from member variables.
* lang/qt/src/qgpgmesignarchivejob.cpp (sign): Move creation of
outdata to sign_to_io_device.
(sign_to_io_device, sign_to_filename): New.
(QGpgMESignArchiveJob::start): Use sign_to_io_device instead of sign.
(QGpgMESignArchiveJobPrivate::startIt): Start the job with the
values from member variables.
* lang/qt/src/qgpgmesignencryptarchivejob.cpp (sign_encrypt): Move
creation of outdata to sign_encrypt_to_io_device.
(sign_encrypt_to_io_device, sign_encrypt_to_filename): New.
(QGpgMESignEncryptArchiveJob::start): Use sign_encrypt_to_io_device
instead of sign_encrypt.
(QGpgMESignEncryptArchiveJobPrivate::startIt): Start the job with the
values from member variables.
* lang/qt/src/signarchivejob.cpp, lang/qt/src/signarchivejob.h
(SignArchiveJob): Add member functions setSigner, signers,
setInputPaths, inputPaths, setOutputFile, outputFile.
* lang/qt/src/signarchivejob_p.h (SignArchiveJobPrivate): Add
members m_signers, m_inputPaths, m_outputFilePath.
* lang/qt/src/signencryptarchivejob.cpp,
lang/qt/src/signencryptarchivejob.h (SignEncryptArchiveJob): Add
member functions setSigner, signers, setRecipients, recipients,
setInputPaths, inputPaths, setOutputFile, outputFile,
setEncryptionFlags, encryptionFlags.
* lang/qt/src/signencryptarchivejob_p.h (SignEncryptArchiveJobPrivate):
Add members m_signers, m_recipients, m_inputPaths, m_outputFilePath,
m_encryptionFlags.
* lang/qt/tests/run-encryptarchivejob.cpp (createOutput): Remove.
(checkOutputFilePath): New.
(main): Create file output writing to stdout if no archive name (or "-")
is given. Exit if file with given archive name already exists. Make
the jobs write the created archive directly to the given archive name.
* lang/qt/tests/run-signarchivejob.cpp (createOutput): Remove.
(checkOutputFilePath): New.
(main): Create file output writing to stdout if no archive name (or "-")
is given. Exit if file with given archive name already exists. Make
the jobs write the created archive directly to the given archive name.
--
This makes it possible to tell gpgtar to write the created archive
directly to a specified file bypassing GpgME's Data IO.
GnuPG-bug-id: 6530
* src/engine-gpg.c (gpg_encrypt): Pass output file name to gpg if output
has file name set.
(gpg_encrypt_sign): Ditto.
(gpg_sign): Ditto.
* tests/run-encrypt.c (show_usage): New option --output.
(main): Parse new option. Set file name on output if --output is given.
Do not print output if --output is given.
* tests/run-sign.c (show_usage): New option --output.
(main): Parse new option. Set file name on output if --output is given.
Do not print output if --output is given.
--
This change makes it possible to tell gpg (and gpgtar) to write the
output (i.e. the signed/encrypted data or the signature or the created
archive) directly to a file with given file name instead of piping
the output back to gpgme.
GnuPG-bug-id: 6530
* lang/qt/src/job.cpp, lang/qt/src/job.h (Job::startIt): New method.
* lang/qt/src/job_p.h (JobPrivate::startIt): New pure virtual method.
* lang/qt/src/qgpgmechangeexpiryjob.cpp
(QGpgMEChangeExpiryJobPrivate::startIt): New.
* lang/qt/src/qgpgmedecryptverifyarchivejob.cpp
(QGpgMEDecryptVerifyArchiveJobPrivate::startIt): New.
* lang/qt/src/qgpgmeencryptarchivejob.cpp
(QGpgMEEncryptArchiveJobPrivate::startIt): New.
* lang/qt/src/qgpgmeencryptjob.cpp (QGpgMEEncryptJobPrivate::startIt):
New.
* lang/qt/src/qgpgmeimportjob.cpp (QGpgMEImportJobPrivate::startIt):
New.
* lang/qt/src/qgpgmelistallkeysjob.cpp
(QGpgMEListAllKeysJobPrivate::startIt): New.
* lang/qt/src/qgpgmesignarchivejob.cpp
(QGpgMESignArchiveJobPrivate::startIt): New.
* lang/qt/src/qgpgmesignencryptarchivejob.cpp
(QGpgMESignEncryptArchiveJobPrivate::startIt): New.
* lang/qt/src/qgpgmesignencryptjob.cpp
(QGpgMESignEncryptJobPrivate::startIt): New.
--
startIt() starts a job if the necessary values have been set before.
This makes it possible to extend jobs with additional ways to start them
without having to worry about overloading existing virtual start()
methods. This will be used first for the different archive jobs.
GnuPG-bug-id: 6530
* lang/qt/src/threadedjobmixin.h (ThreadedJobMixin::run): Make all
overloads public.
--
This allows calling the run() functions from the JobPrivate subclasses.
GnuPG-bug-id: 6530
* lang/qt/src/job_p.h (JobPrivate::start): Rename to startNow.
* lang/qt/src/job.cpp (Job::startNow): Adapt function call.
* lang/qt/src/qgpgmechangeexpiryjob.cpp
(QGpgMEChangeExpiryJobPrivate::start): Rename to startNow.
* lang/qt/src/qgpgmedecryptverifyarchivejob.cpp
(QGpgMEDecryptVerifyArchiveJobPrivate::start): Rename to startNow.
* lang/qt/src/qgpgmeencryptarchivejob.cpp
(QGpgMEEncryptArchiveJobPrivate::start): Rename to startNow.
* lang/qt/src/qgpgmeencryptjob.cpp (QGpgMEEncryptJobPrivate::start):
Rename to startNow.
* lang/qt/src/qgpgmeimportjob.cpp (QGpgMEImportJobPrivate::start):
Rename to startNow.
* lang/qt/src/qgpgmelistallkeysjob.cpp
(QGpgMEListAllKeysJobPrivate::start): Rename to startNow.
* lang/qt/src/qgpgmesignarchivejob.cpp
(QGpgMESignArchiveJobPrivate::start): Rename to startNow.
* lang/qt/src/qgpgmesignencryptarchivejob.cpp
(QGpgMESignEncryptArchiveJobPrivate::start): Rename to startNow.
* lang/qt/src/qgpgmesignencryptjob.cpp
(QGpgMESignEncryptJobPrivate::start): Rename to startNow.
--
Using the same name for the public and the private method avoids
confusion.
GnuPG-bug-id: 6530
* lang/qt/src/job.cpp, lang/qt/src/job_p.h (getJobPrivate): Replace with
two overloads for non-const pointer and const pointer to Job.
* lang/qt/src/job_p.h (jobPrivate): Replace with two template functions
for non-const pointer and const pointer to Job.
--
This helps avoid changing values stored in the JobPrivate class in
const functions (e.g. getters) of Job classes.
GnuPG-bug-id: 6530
* NEWS: Mention this.
* lang/cpp/src/data.h, lang/cpp/src/data.cpp (Data::setSizeHint): New.
* lang/qt/src/qgpgmedecryptjob.cpp,
lang/qt/src/qgpgmedecryptverifyarchivejob.cpp,
lang/qt/src/qgpgmedecryptverifyjob.cpp,
lang/qt/src/qgpgmeencryptjob.cpp,
lang/qt/src/qgpgmesignencryptjob.cpp,
lang/qt/src/qgpgmesignjob.cpp,
lang/qt/src/qgpgmeverifydetachedjob.cpp,
lang/qt/src/qgpgmeverifyopaquejob.cpp: Set size for input IODevice.
--
This fixes the case where the old detection of the size of QIOdevice
using seek would overflow and instead explicitly uses QIODevice::size
to check for the size and pass it through as an uint64.
GnuPG-Bug-Id: T6534
* lang/cpp/src/data.cpp (Data::setFlag): New.
* lang/cpp/src/data.h: Update accordingly.
* NEWS: Mention this.
--
This exposes the generic flag mechanism for data to users
of the C++ library. It is similar to Context::setFlag but
has no getter.
* tests/run-encrypt.c (cancel_after_progress): New.
(progress_cb): Take care of it.
(main): Add option --cancel.
--
This tool may now be used to test gpgme_cancel_async.
Releated to
GnuPG-bug-id: 6534
* doc/gpgme.texi (GPG_ERR_FULLY_CANCELED): New.
* lang/cpp/src/context.cpp (Error::isCanceled): Also return true for
GPG_ERR_FULLY_CANCELED.
--
For internal purposes, GnuPG sometimes uses the error code
GPG_ERR_FULLY_CANCELED instead of GPG_ERR_CANCELED. From a user
perspective both values mean the same thing and should therefore be
treated identically.
GnuPG-bug-id: 6510
lang/cpp/Makefile.am (SUBDIRS): Depend tests in RUN_GPG_TESTS.
lang/python/Makefile.am (SUBDIRS): Ditto.
--
This is similar to the core and qt switch to disable the tests.
Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
ChangeLog entries added by wk.
* src/engine-gpg.c (gpg_keysign): Required USERID to be non-empty.
--
For some language bindings it is easier if the engine considers an
empty user id to be equivalent to NULL.
* lang/python/helpers.c (pyPassphraseCb): Use gpgme_io_writen.
(_gpg_interact_cb): Ditto.
* lang/python/helpers.h (write) [W32]: Remove bad write macro.
--
GnuPG-bug-id: T6501
Using write(2) without checking for EINTR is a not a good idea.
Futher gpgme_io_writen is the correct way to send data from a
callback. This also fixed the wrong use of a simple macro for
Windows.
* lang/cpp/src/key.h (canReallySign): Deprecate.
* lang/cpp/src/key.cpp (canSign): Remove workaround. Use implementation
of canReallySign.
(canReallySign): Use canSign().
(operator<<): Use canSign().
--
The workaround in canSign was added 19 years ago and canReallySign, the
workaround for the workaround, was added 13 years ago. Time to get rid
of those workarounds for a bug in gpgme which has been fixed long ago
and which cause bugs for any unsuspecting user of Key::canSign().
GnuPG-bug-id: 6456
* configure.ac: Define GPG_ERR_ENABLE_GETTEXT_MACROS.
* src/version.c (do_subsystem_inits) [W32]: Switch gettext to UTF-8.
--
On Windows, applications using GpgME can now rely on localized texts
returned by GpgME, e.g. the texts for error codes, to be UTF-8 encoded.
In particular, this saves a useless and possibly lossy conversion to
native encoding and back to UTF-8. On other OSes, where we use the
system provided gettext, we assume that UTF-8 is used nowadays.
GnuPG-bug-id: 5960
* configure.ac: Unset PYTHON_LIBS. Support python 3.10.
* m4/python.m4: Find correct version string for python >= 3.10.
--
See-also: https://dev.gnupg.org/D546
Also test for 3.11 and 3.12 (wk).
* tests/run-verify.c (main): Set encoding.
--
gpgsm usually used autodetection of the input format. But sometimes
it is required to tell gpgsm that the input is binary encoded. In
particular, this allows to strip trailing zeroes from a detached
signature.
* lang/qt/src/job.h (Job): Add signals jobProgress and rawProgress.
Deprecate signal progress.
* lang/qt/src/multideletejob.cpp (MultiDeleteJob::slotResult): Emit
new progress signals.
* lang/qt/src/qgpgmerefreshsmimekeysjob.cpp
(QGpgMERefreshSMIMEKeysJob::slotStatus): Ditto.
* lang/qt/src/threadedjobmixin.h (ThreadedJobMixin::showProgress): Use
modern overload of QMetaObject::invokeMethod to forward the progress
signal and add the value of what. Add forwarding of progress to the new
signals.
* lang/qt/tests/t-encrypt.cpp (EncryptionTest::testProgress): Test
the new signals instead of the deprecated one.
--
The new signal jobProgress omits the what value which is useless for
most consumers. The new signal rawProgress makes all information
provided by the backend available to consumers. The latter is not
really meant to be used by users of gpgme. It will be used by the
archive jobs to provide more user-friendly signals.
GnuPG-bug-id: 6342
* src/debug.c (errfp): Remove.
(debug_init): Factor some code out to ...
(safe_to_use_debug_file): new.
(tid_log_callback): New.
(debug_init): Rewrite to make use of gpgrt logging.
(_gpgme_debug): Ditto.
(_gpgme_debug_end): Remove extra LF testing code.
* src/dirinfo.c (get_gpgconf_item): Remove now unneeded LFs. Realign
output.
