* tests/gpg/Makefile.am: Use BUILT_SOURCES instead of check-local
and initial.test.
* lang/qt/tests/Makefile.am: Ditto.
--
This fixes "make dist" failure when source tree is clean:
git clean -dxf
autoreconf -ivf
./configure
make dist
BUILT_SOURCES should be used when file as generated without explicit
dependency. The check-local is all-am dependency, this means that it
will be resolved also in "make dist".
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
* tests/gpg/Makefile.am (tests_unix): Add 't-thread-keylist' and
't-thread-keylist-verify'.
(c_tests): Drop them here.
--
The tests use pthreads and we suspect problems with MinGW's wrappers.
Signed-off-by: Justus Winter <justus@g10code.com>
* src/gpgme.h.in (GPGME_ENCRYPT_WRAP): New const.
(gpgme_decrypt_flags_t): New enum.
(GPGME_DECRYPT_VERIFY): New const
(GPGME_DECRYPT_UNWRAP): New const
(gpgme_op_decrypt_ext_start): New func.
(gpgme_op_decrypt_ext): New func.
* src/decrypt-verify.c (gpgme_op_decrypt_ext_start): New.
(gpgme_op_decrypt_ext): New.
(decrypt_verify_start): Add arg FLAGS. Replace call to
engine_op_decrypt_verify by the plain decrypt with the flag set.
(gpgme_op_decrypt_verify_start): Pass the flag.
(gpgme_op_decrypt_verify): Pass the flag.
* src/decrypt.c (decrypt_start): Rename to ...
(_gpgme_decrypt_start): this. Add arg FLAGS. Pass FLAGS to
engine_op_decrypt.
(gpgme_op_decrypt_start): Adjust for chnage pass 0 for FLAG.
(gpgme_op_decrypt_start): Ditto.
* src/engine.c (_gpgme_engine_op_decrypt_verify): Remove.
(_gpgme_engine_op_decrypt): Add arg FLAGS.
* src/gpgme.def, src/libgpgme.vers: Add new functions.
* src/engine-backend.h (struct engine_ops): Remove member
'decrypt_verify'. Add FLAGS to 'decrypt'. Adjust all initialization.
* src/engine-uiserver.c (uiserver_decrypt): Remove.
(uiserver_decrypt_verify): Remove.
(_uiserver_decrypt): Rename to ...
(uiserver_decrypt): this. Replace arg VERIFY by new arg FLAGS.
* src/engine-gpg.c (gpg_decrypt): Support GPGME_DECRYPT_UNWRAP.
(gpg_encrypt): Support GPGME_ENCRYPT_WRAP.
* tests/run-decrypt.c (main): New option --unwrap.
* tests/run-encrypt.c (main): New option --wrap.
--
Manual testing of that wrap/unwrap feature can be done this way:
./run-encrypt --verbose --key Alice /etc/motd > x
./run-decrypt --verbose --unwrap x > y
./run-encrypt --verbose --key Bob --wrap y > z
1. The message was first encrypted to Alice.
2. Alice decrypts the message receiving a valid OpenPGP message.
3. Alice encrypt that message to Bob
This will also work with encrypted and signed messages; the signature
will be kept intact during re-encryption. Requires GnuPG 2.1.12.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/dirinfo.c (WANT_GPG_WKS_CLIENT_NAME): New const.
(struct dirinfo): New field 'gpg_wks_client_name'.
(get_gpgconf_item): Build it on demand.
(gpgme_get_dirinfo): New value "gpg-wks-client-name" for WHAT.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (GPGME_ENCRYPT_THROW_KEYIDS): New flag.
* src/engine-gpg.c (gpg_encrypt): Implement flag
(gpg_encrypt_sign): Implement flag.
* tests/run-encrypt.c (main): New option --throw-keyids.
--
It would be nice to also selectively hide recipients (that is gpg
--hidden-recipient) but our API does not ye allow this because it is
based on key objects. A possible way to implement that would be a API
to set processing flags into a key but this is complicated due to the
reference counting and thus the possibility that a key object is used
by different context.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/start-stop-agent: Do not create 'gpg-agent.conf' if it does
not exist.
Fixes-commit: 16b202d999
Signed-off-by: Justus Winter <justus@g10code.com>
* lang/python/tests/Makefile.am (gpg-agent.conf): Do not hard-code the
option. This breaks gpg-agent from GnuPG 2.0.
* tests/start-stop-agent: Rather, check if the option is supported and
add it to the configuration if it is.
GnuPG-bug-id: 3008
Fixes-commit: bbf19124bb
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpg/t-gpgconf.c (main): Reduce iterations to 10.
* tests/gpg/t-thread-keylist-verify.c,
tests/gpg/t-thread-keylist.c (THREAD_COUNT): Reduce to 10.
--
While these tests tested for race conditions a smaller number
of iteration should still show problems if they are run on
multiple systems and regulary. While the 100 Thread count in
the t-thread tests could lead to resource problems.
* tests/start-stop-agent: Don't autostart agent on --stop and
running check. Use --debug-quick-random when starting.
--
This should speed up the tests especially on low entropy systems.
Possibly fixing a hang on pythons op_genkey test in the Launchpad
build enviorment (see launchpad issue 1655298)
* tests/gpg/t-gpgconf.c: Include support functions.
(fail_if_err): Remove macro.
(init_gpgme): Remove function.
(lookup): New function.
(main): Update some values and verify that the changes are applied.
* tests/gpg/t-support.h (test): New assert-like macro.
GnuPG-bug-id: 2881
Signed-off-by: Justus Winter <justus@g10code.com>
* src/engine-gpg.c (struct engine_gpg): New field
override_session_key.
(gpg_release): Free that field.
(gpg_decrypt): With gnupg 2.1.16 use --override-session-key-fd.
* tests/run-decrypt.c (main): Fix setting over the override key.
--
Note that this works only with gnupg 2.1.16 and later.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpgme.texi: Document requirements of verifying that it is OK to
use session_key.
* tests/run-decrypt.c: Ensure that we fail if we're unable to access
the session key, so that we do not violate the guidance above.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Changed the description
-@code{gpgme_set_ctx_flag (ctx, "export-session-key")} returns
-@code{GPG_ERR_NO_ERROR} or @code{gpgme_get_ctx_flag (ctx,
-"export-session-key")} returns @code{"1"}.
+@code{gpgme_set_ctx_flag (ctx, "export-session-key")} returns success
+or @code{gpgme_get_ctx_flag (ctx, "export-session-key")} returns true
+(non-empty string).
to get gpgme_get_ctx_flag for boolean values in sync with its own
description.
Note that I don't agree with the above suggestion but it does not
really harm to have it in the man page.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.c (gpgme_set_ctx_flag): Add flags "export-session-key" and
"override-session-key".
(gpgme_get_ctx_flag): Ditto.
(gpgme_set_export_session_keys): Remove.
(gpgme_get_export_session_keys): Remove.
* src/gpgme.def, src/libgpgme.vers: Remove them.
* src/context.h (struct gpgme_context): Add field
override_session_key.
* src/decrypt-verify.c (decrypt_verify_start): Pass
override_session_key value to the engine.
* src/decrypt.c (decrypt_start): Ditto.
* src/engine.c (_gpgme_engine_op_decrypt): Ditto.
(_gpgme_engine_op_decrypt_verify): Ditto.
* src/engine-backend.h (struct engine_ops): Extend DECRYPT and
DECRYPT_VERIFY_START with override_session_key.
* src/engine-uiserver.c (_uiserver_decrypt): Add stub arg
override_session_key.
(uiserver_decrypt): Ditto.
(uiserver_decrypt_verify): Ditto.
* src/engine-gpgsm.c (gpgsm_decrypt): Ditto.
* src/engine-gpg.c (gpg_decrypt): Add arg override_session_key and set
corresponding gpg option.
* tests/run-decrypt.c (print_result): Print the session key if
available.
(main): Add options --export-session-key and --override-session-key.
--
To keep the number of context manipulation functions at bay, this
patches removes the just added gpgme_set_export_session_keys and
gpgme_get_export_session_keys by flags for the generic context
function.
The patch also implements the --override-session-key feature.
GnuPG-bug-id: 2754
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (gpgme_get_ctx_flag): New.
* src/gpgme.c (gpgme_set_ctx_flag): Move down the file and add a trace
statement.
(gpgme_get_ctx_flag): New.
* src/gpgme.def, src/libgpgme.vers: Add new interface.
Signed-off-by: Werner Koch <wk@gnupg.org>
* gpg/t-thread-keylist-verify.c,
gpg/t-thread-keylist.c: Reduce threads to 100
--
Due to the limit of FD_SETSIZE the
number of parallel threads is limited. So some systems
run into this problem when running the testsuite.
* tests/gpg/t-thread-keylist-verify.c (start_keylist): Mark
arg as unused. Release context.
(start_verify): Ditto.
(main): Mark args as unused.
* tests/gpg/t-thread-keylist.c (start_keylist): Mark
arg as unused. Release context.
(main): Mark args as unused.
* configure.ac: Require libgpg-error 1.17. No longer
check for pthread.
* doc/gpgme.texi: Document removed neccessity for thread
safe gpgme flavours.
* src/sema.h (DEFINE_GLOBAL_LOCK),
(DEFINE_STATIC_LOCK, INIT_LOCK, DECLARE_LOCK)
(DESTROY_LOCK, LOCK, UNLOCK): Change to gpgrt equivalents.
* src/posix-sema.c, src/w32-sema.c: Removed.
* src/Makefile.am: Remove libpthread and
Update accordingly.
* src/ath.c, src/ath.h (ath_mutex_init)
(ath_mutex_destroy, ath_mutex_lock, ath_mutex_unlock): Removed.
* src/ath.h (ATH_MUTEX_INITIALIZER): Removed.
* src/version.c (do_subsystem_inits): sema_subsystem_init is
no longer required.
* tests/gpg/Makefile.am: Add new threading tests.
(t_thread1_LDADD, t_cancel_LDADD):
Use just gpgme.
* tests/gpg/t-thread-keylist-verify.c,
tests/gpg/t-thread-keylist.c: New.
* src/gpgme-config.in: Use -lgpgme for thread-model pthread.
--
Using gpgrt locks instead of pthread locks removes
the neccessity to link pthread directly to gpgme and
have a different, thread safe flavor of gpgme. Now
gpgme is thread-safe if the conditions mentioned
in the doc are met.
As the cpp bindings linked against libgpgme
and not libgpgme-pthread this fixes threading problems
with them.
libgpgme-pthread is removed but gpgme-config still supports
--thread=pthread for compatibility with find scripts.
* lang/cpp/src/key.cpp: Include <strings.h> for 'strcasecmp'.
* tests/gpg/t-cancel.c: Include <sys/select.h> for 'fd_set' and
friends.
Signed-off-by: Justus Winter <justus@g10code.com>
* THANKS, doc/ChangeLog-2011, tests/ChangeLog-2011,
tests/gpg/geheim.txt: convert from iso 8859-1 to utf-8.
* lang/qt/src/dataprovider.cpp, lang/qt/src/qgpgmerefreshkeysjob.cpp,
lang/qt/src/qgpgmesecretkeyexportjob.cpp: replace U+FFFD REPLACEMENT
CHARACTER with proper U+00E4 LATIN SMALL LETTER A WITH DIAERESIS.
--
Note that src/versioninfo.rc.in is still ISO-8859-1. I don't know
whether Windows will properly handle UTF-8 in this file or not, so i
have not touched it.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* lang/python/tests/Makefile.am (./pubring-stamp): Use --batch with
GPG to avoid Pinentries during import when using GnuPG >= 2.1.
Replace touch by echo.
* tests/gpg/Makefile.am (./pubring-stamp): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (gpgme_interact_cb_t): New.
(GPGME_INTERACT_CARD): New.
(gpgme_op_interact_start, gpgme_op_interact): New.
* src/libgpgme.vers, src/gpgme.def: Add new functions.
* src/edit.c (op_data_t): Rename fnc to fnc_old and change users. Add
fnc.
(edit_status_handler): Call old or new callback.
(command_handler): Ditto.
(interact_start): New.
(gpgme_op_interact_start, gpgme_op_interact_start): New.
* src/status-table.c (_gpgme_status_to_string): New.
* tests/gpg/t-edit.c (edit_fnc): Rename to interact_fnc and change
type of STATUS. Use gpgme_io_writen.
(main): s/gpgme_op_edit/gpgme_op_interact/.
--
This change will eventually allow us to remove all those status codes
from gpgme.h.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/engine-backend.h (engine_ops): Change prototype of genkey.
* src/engine-gpgsm.c (gpgsm_genkey): Change accordingly.
* src/engine-gpg.c (gpg_genkey): Change it to a dispatcher.
(gpg_createkey_from_param): New for the old functionality.
(gpg_createkey_legacy): New. Stub for now.
(gpg_createkey): New.
(gpg_addkey): New. Stub for now.
(gpg_adduid): New. Stub for now.
* src/engine.c (_gpgme_engine_op_genkey): Add new args.
* src/genkey.c (op_data_t): Add field ERROR_CODE.
(parse_error): New.
(genkey_status_handler): Parse ERROR status line.
(genkey_start): Use NULL/0 for the new args.
(createkey_start): New.
(gpgme_op_createkey_start, gpgme_op_createkey): New.
* src/gpgme.def, src/libgpgme.vers: Add gpgme_op_createkey_start and
gpgme_op_createkey.
* src/gpgme.h.in (_gpgme_op_genkey_result): Add fields PUBKEY and
SECKEY.
(GPGME_CREATE_SIGN): New.
(GPGME_CREATE_ENCR): New.
(GPGME_CREATE_CERT): New.
(GPGME_CREATE_AUTH): New.
(GPGME_CREATE_NOPASSWD): New.
(GPGME_CREATE_SELFSIGNED): New.
(GPGME_CREATE_NOSTORE): New.
(GPGME_CREATE_WANTPUB): New.
(GPGME_CREATE_WANTSEC): New.
(GPGME_CREATE_FORCE): New.
* tests/run-genkey.c: New.
* tests/Makefile.am (noinst_PROGRAMS): Add it.
--
This function uses the new --quick-gen-key API of gpg. A limited
compatibility mode to use older gpg versions and gpgsm will eventually
be provided. Not all flags are currently implemented.
./run-genkey --unprotected --force test@example.com
Create a new standard key with the given user id. --force is used to
allow creating more than one key with that user id in the keyring.
./run-genkey --unprotected --force \
test@example.com default default 2145826800
Creates a new standard key with an expiration date of 2037-12-31.
./run-genkey --unprotected --force \
test@example.com future-default default 2145826800
Create a standard key using the fugure default algorithms.
Signed-off-by: Werner Koch <wk@gnupg.org>
* lang/python/tests/t-sig-notation.py: Only check the critical flag
when GnuPG >= 2.1.13 is used.
* tests/gpg/t-sig-notation.c: Likewise.
Fixes-commit: c88c9ef3
Signed-off-by: Justus Winter <justus@g10code.com>
* src/gpgme.h.in (struct _gpeme_tofu_info): Rename FIRSTSEEN to
SIGNFIRST and LASTSEEN to SIGNLAST. Add ENCRFIST and ENCRLAST.
* src/keylist.c (parse_tfs_record): Parse to ENCRFIRST and ENCRLAST.
* src/verify.c (parse_tofu_stats): Ditto.
* tests/run-keylist.c (main): Adjust and print encrypt stats.
* tests/run-verify.c (print_result): Ditto.
* lang/cpp/src/tofuinfo.h (TofuInfo): Rename firstSeen to signFirst
and lastSeen to signLast. Add encrCount, encrFirst and encrLast.
* lang/cpp/src/tofuinfo.cpp (encrCount, encrFirst, encrLast): New.
--
The latest GnuPG commits have the needed changes but we also allow the
use of currently released GnuPG version.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (struct _gpgme_signature): Remove field 'tofu'. Add
field 'key'.
(struct _gpgme_key): Add field 'fpr'.
(struct _gpgme_user_id): Add field 'tofu'.
(struct _gpgme_tofu_info): Remove fields 'address' and 'fpr'.
* src/key.c (gpgme_key_unref): Release TOFU and FPR.
* src/keylist.c (keylist_colon_handler): Store the fingerprint of the
first subkey also in KEY.
* src/verify.c (release_tofu_info): Remove.
(release_op_data): Release KEY.
(parse_tofu_user): Rewrite for new data structure.
(parse_tofu_stats): Ditto.
(parse_tofu_stats_long): Ditto.
* tests/run-verify.c (print_result): Ditto.
* tests/run-keylist.c (main): Print more fields.
--
TOFU information are now associated with the user ID and not with a
separate object.
Note that this breaks code relying on the former non-released TOFU
feature. The C++ bindings won't work right now.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/engine-gpg.c: Include data.h.
(add_input_size_hint): New.
(gpg_decrypt, gpg_encrypt, gpg_encrypt_sign, gpg_sign)
(gpg_verify): Call new function,
* tests/run-encrypt.c (status_cb): Print to stderr.
(progress_cb): New.o
(main): Add option --progress. Print full-status lines. Provide a
size for the input data.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.h.in (gpgme_encrypt_flags_t): New flag
GPGME_ENCRYPT_SYMMETRIC.
* src/engine-gpg.c (gpg_encrypt): Also add --symmetric if the flag
is given.
* NEWS: Mention new flag.
* tests/run-encrypt.c (show_usage): Extend for --symmetric.
(main): Handle --symmetric.
(main): Set passphrase_cb in loopback mode.
(main): Fix encrypt call if no recipients are given.
* tests/gpg/t-encrypt-mixed.c: New.
* tests/gpg/Makefile.am (c_tests): Add new test.
* doc/gpgme.texi: Document new flag.
* src/gpgme.h.in (GPGME_STATUS_NOTATION_FLAGS): New.
* src/status-table.c (status_table): Add new status.
* src/verify.c (parse_notation): Handle flags. Also fix NOTATION_DATA
in case gpg would not percent-escape spaces.
(_gpgme_verify_status_handler): Handle flags.
* tests/run-verify.c (print_result): Print notaion data.
--
Note that this does only work with the soon to be released GnuPG
2.1.13.
* src/gpgme.h.in (gpgme_set_ctx_flag): New prototype.
* src/gpgme.c (gpgme_set_ctx_flag): New.
* src/gpgme.def, src/libgpgme.vers: Add new function.
* src/context.h (struct gpgme_context): Add FULL_STATUS.
* src/decrypt.c (_gpgme_decrypt_status_handler): Do not call the
status callback if FULL_STATUS is set.
* src/genkey.c (genkey_status_handler): Ditto.
* src/passphrase.c (_gpgme_passphrase_status_handler): Ditto.
* src/sign.c (_gpgme_sign_status_handler): Ditto.
* src/engine-backend.h (struct engine_ops): Add SET_STATUS_CB and add
adjust all definitions of that variable.
* src/engine.c (_gpgme_engine_set_status_cb): New.
* src/op-support.c (_gpgme_op_reset): Call this function.
* src/engine-gpg.c (struct engine_gpg): Add fields MON_CB and
MON_CB_VALUE.
(gpg_set_status_cb): New.
(_gpgme_engine_ops_gpg): Register that function.
(read_status): Call the monitor callback.
* src/engine-gpgsm.c (struct engine_gpgsm): Add fields MON_CB and
MON_CB_VALUE.
(_gpgme_engine_ops_gpgsm): Register that function.
(gpgsm_assuan_simple_command): Change first arg to be an engine
context and adjust call callers. Call the monitor callback.
* src/engine-uiserver.c (struct engine_uiserver): Add fields MON_CB
and MON_CB_VALUE.
(_gpgme_engine_ops_uiserver): Register that function.
(uiserver_assuan_simple_command): Change first arg to be an engine
context and adjust call callers. Call the monitor callback.
* tests/run-verify.c (status_cb): New.
(print_result): Print algo names.
(main): Add option --status.
--
This new feature is mainly intended for bug tracking. Having access
to the raw status lines might also be useful for applications, though.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpgme.texi: Document offline mode.
* src/context.h (gpgme_context): Add offline.
* src/engine-backend.h (keylist, keylist_ext): Add engine_flags.
* src/engine.c, src/engine.h (_gpgme_engine_op_keylist): Ditto.
(_gpgme_engine_op_keylist_ext): Ditto.
* src/engine.h (GPGME_ENGINE_FLAG_OFFLINE): New.
* src/engine-gpg.c (gpg_keylist, gpg_keylist_ext): Ditto.
* src/engine-gpgsm.c (gpgsm_keylist): Handle engine_flags.
(gpgsm_keylist_ext): Ditto.
* src/gpgme.c (gpgme_set_offline, gpgme_get_offline): New.
* src/gpgme.def (gpgme_set_offline, gpgme_get_offline): New.
* src/gpgme.h.in (gpgme_set_offline, gpgme_get_offline): New.
* src/libgpgme.vers (gpgme_set_offline, gpgme_get_offline): New.
* src/keylist.c (gpgme_op_keylist_start): Set offline flag.
(gpgme_op_keylist_ext_start): Ditto.
* tests/run-keylist.c (show_usage, main): Add offline argument.
--
The offline engine option was introduced with gpgsm 2.1.6
it is mainly useful for a full keylisting that includes
the certificate validation but does not depend on external
information that could take an indefinite amount of time to
collect.
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* tests/gpgsm/final.test: New.
* tests/gpgsm/initial.test: New.
* tests/gpg/start-stop-agent: Move to ../.
* tests/gpgsm/Makefile.am (TESTS_ENVIRONMENT): Export top_srcdir.
(TESTS): Add intial.test and final.test.
(AM_LDFLAGS): Add -no-install.
(clean-local): Use start-stop-agent
(initial.test): Add dependency.
* tests/gpg/Makefile.am (top_srcdir): Export top_srcdir.
(AM_LDFLAGS): Add -no-install.
(check-local): Depend on pubring-stamp instead of pubring.gpg.
(initial.test): Depend on check-local.
(./pubring-gpg): Replace by rule for ./pubring-stamp.
--
There are also a couple of other changes which should make the tests a
bit more robust and the gpg and gpgsm tests more similar.
The -no-install avoids creating wrappers for test programs, which make
debugging easier.
The dependency on check-local guarantees that its rules are run before
the first test. This is important because conf files are setup by
this rule. Earlier automake versions seem to have run check-local
always before the tests but today the order of execution is not
defined.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/gpgme.c (gpgme_set_global_flag): Add names "disable-gpgconf",
"gpgconf-name", and "gpg-name".
* src/dirinfo.c (_gpgme_dirinfo_disable_gpgconf): New.
(get_gpgconf_item): Minor debug info change.
* src/posix-util.c (default_gpg_name, default_gpgconf_name): Add vars.
(_gpgme_set_default_gpg_name): New.
(_gpgme_set_default_gpgconf_name): New.
(_gpgme_get_gpg_path, _gpgme_get_gpgconf_path): Use new vars.
(walk_path): Add debug output on failure.
* src/w32-util.c (default_gpg_name, default_gpgconf_name): Add vars.
(replace_slashes): New.
(get_basename): New.
(_gpgme_set_default_gpg_name): New.
(_gpgme_set_default_gpgconf_name): New.
(_gpgme_get_gpg_path, _gpgme_get_gpgconf_path): Use new vars.
* tests/t-engine-info.c (main): Add --verbose and --set-global-flag
options.
--
Note that the Windows part has not been tested.
* configure.ac (NEED_GPG_VERSION, NEED_GPGSM_VERSION)
(NEED_G13_VERSION, NEED_GPGCONF_VERSION): Remove vars and all related
checks. Do not check for any engine version.
(HAVE_ASSUAN): Remove AM conditional.
* src/Makefile.am: Remove separate component vars and always build all
engines but uiserver.
* src/dirinfo.c (WANT_GPGCONF_NAME): New.
(struct dirinfo): Add field gpgconf_name.
(_gpgme_get_default_gpgconf_name): Use WANT_GPGCONF_NAME.
(get_gpgconf_item): Set gpgconf name and adjust for _gpgme_get_*_path
now returning a malloced string.
* src/engine.c (engine_ops): Always init all engines except for
uiserver.
* src/posix-util.c (_gpgme_get_gpgsm_path, _gpgme_get_g13_path):
Remove unused functions.
(walk_path): New.
(_gpgme_get_gpg_path, _gpgme_get_gpgconf_path ): Re-implement using
walk_path.
* src/w32-util.c (_gpgme_get_gpgsm_path, _gpgme_get_g13_path): Remove
unused functions.
(_gpgme_get_gpg_path, _gpgme_get_gpgconf_path): Return a malloced
string.
* src/engine-g13.c (g13_get_req_version): Use a hardwired string with
the required version. This info belongs into this file.
* src/engine-gpg.c (gpg_get_req_version): Ditto.
* src/engine-gpgconf.c (gpgconf_get_req_version): Ditto.
* src/engine-gpgsm.c (gpgsm_get_req_version): Ditto.
* tests/t-engine-info.c: Replace now useless test by an info output.
* tests/gpg/Makefile.am (GPG, GPG_AGENT): Hardwire gpg and gpg-agent.
* tests/gpgsm/Makefile.am (GPGSM): Hardwire gpgsm.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpg/start-stop-agent: New.
* tests/gpg/initial.test: New.
* tests/gpg/final.test: New.
* tests/gpg/Makefile.am (c_tests): New.
(TESTS): Move all to c_tests. Add initial.test, final.test, and
c_tests.
(TESTS_ENVIRONMENT): Add C_ALL=C
(private_keys): New.
(EXTRA_DIST): Add new files.
(./private-keys-v1.d/gpg-sample.stamp): Copy private keys.
(all-local): Depend on gpg-sample.stamp.
* tests/gpg/13CBE3758AFE42B5E5E2AE4CED27AFA455E3F87F: New.
* tests/gpg/13CD0F3BDF24BE53FE192D62F18737256FF6E4FD: New.
* tests/gpg/76F7E2B35832976B50A27A282D9B87E44577EB66: New.
* tests/gpg/7A030357C0F253A5BBCD282FFC4E521B37558F5C: New.
* tests/gpg/A0747D5F9425E6664F4FFBEED20FBCA79FDED2BD: New.
--
GnuPG 2.1 requires that the agent knows the private keys. Thus we
need to install them. The code should still work with GnuPG < 2.1.
To make the whole testing using a agent more robust, the way to start
the agent has also be changed.
* configure.ac: Rename my_foo variables to mym4_foo variables to make
clear that they are processed by m4.
(VERSION_NUMBER): New ac_subst.
(AH_BOTTOM): Add CRIGHTBLURB macro.
(BUILD_REVISION, BUILD_FILEVERSION, BUILD_TIMESTAMP): Change them to
work similar to libgpg-error et al.
* src/versioninfo.rc.in: Remove use of BUILD_NUMBER and get it in line
with gpg-error et al.
* src/version.c (cright_blurb): New.
(gpgme_check_version_internal): Add magic to display the above
information.
* tests/t-version.c (main): Add option --verbose.
* build-aux/gitlog-to-changelog: New script. Taken from gnulib.
* build-aux/git-log-fix: New file.
* build-aux/git-log-footer: New file.
* build-aux/git-hook/commit-msg: New script.
* doc/HACKING: New file.
* ChangeLog: New file.
* Makefile.am (EXTRA_DIST): Add new files.
(gen-ChangeLog): New.
(dist-hook): Run gen-ChangeLog.
* autogen.sh: Install commit-msg hook for git.
Rename all ChangeLog files to ChangeLog-2011.
* configure.ac (NEED_GPG_VERSION_DEFAULT): Bump to 1.4.0 as 1.3.0
was development versions only.
tests/
2009-10-26 Marcus Brinkmann <marcus@g10code.de>
* opassuan/t-command.c: Update to new interface.
src/
2009-10-26 Marcus Brinkmann <marcus@g10code.de>
* gpgme.h.in (struct gpgme_io_event_done_data)
(gpgme_io_event_done_data_t): New types.
(struct _gpgme_op_assuan_result): Deprecate the err member.
(gpgme_op_assuan_result): Deprecate (for now).
(gpgme_op_assuan_transact_ext): New prototype.
(gpgme_op_assuan_transact): Deprecate.
(struct _gpgme_op_g13_result): Replace with ...
(struct _gpgme_op_vfs_mount_result): ... this.
(gpgme_op_g13_mount): Replace with ...
(gpgme_op_vfs_mount): ... this.
* gpgme.def (gpgme_op_assuan_transact_ext, gpgme_wait_ext)
(gpgme_op_vfs_mount_result, gpgme_op_vfs_mount): New.
(gpgme_op_g13_mount): Remove.
* libgpgme.vers: Likewise.
* engine-backend.h (struct engine_ops): Remove RESULT_CB and
RESULT_CB_VALUE args in opassuan_transact member. Add CANCEL_OP
member.
* ops.h (_gpgme_cancel_with_err, _gpgme_wait_on_condition): Add
OP_ERR argument.
(_gpgme_wait_one_ext): New prototype.
* context.h (ctx_op_data_id_t): Add OPDATA_VFS_MOUNT.
* engine-g13.c (g13_cancel_op): New function.
(parse_status): Remove declaration.
(g13_assuan_simple_command): Do nothing with status lines for now.
(status_handler): Update opaque value access.
(_gpgme_engine_ops_g13): Add new cancel_op member.
* gpgme.c (_gpgme_cancel_with_err): Add new parameter OP_ERR.
Handle operational errors.
(gpgme_cancel, gpgme_io_read, gpgme_io_write): Add debug output.
* data.c (_gpgme_data_inbound_handler)
(_gpgme_data_outbound_handler): Adjust opaque value access.
* engine-gpg.c (command_handler, status_handler)
(colon_line_handler): Likewise.
* engine-gpgsm.c (status_handler): Likewise.
* engine-gpg.c (_gpgme_engine_ops_gpg): Add cancel_op member.
* engine-gpgsm.c (_gpgme_engine_ops_gpgsm): Likewise.
* g13.c: Rewritten (and will be rewritten again).
* engine.h (_gpgme_engine_op_assuan_transact): Remove result_cb
and result_cb_value parameters from prototype.
(_gpgme_engine_cancel_op): New prototype.
* engine.c (engine_ops) [! ENABLE_ASSUAN]: Add missing comma.
(_gpgme_engine_op_assuan_transact): Remove result_cb and
result_cb_value parameter.
(_gpgme_engine_cancel_op): New function.
* wait.h (_gpgme_run_io_cb): Add new argument OP_ERR.
(struct io_cb_data): New struct to pass opaque data and get a
op_err return value. Needed because we can't modify I/O callback
handler signature because it is exposed to the user.
* wait.c (_gpgme_run_io_cb): Add OP_ERR parameter. Handle
operational errors.
* wait-user.c (_gpgme_user_io_cb_handler): Handle operational
errors.
* wait-private.c (_gpgme_wait_on_condition): New argument to
retrieve the operational result. Handle operational errors in
session based protocols.
(_gpgme_wait_one_ext): New function.
(_gpgme_wait_one): Pass argument in invocation of
_gpgme_wait_on_condition.
* wait-global.c (struct ctx_list_item): Add member OP_ERR.
(ctx_done): New argument OP_ERR.
(ctx_wait): New argument OP_ERR.
(gpgme_wait_ext): New function based on gpgme_wait but handling
operational errors.
(gpgme_wait): Implement in term of gpgme_wait_ext.
* keylist.c (gpgme_op_keylist_next): Pass argument in invocation
of _gpgme_wait_on_condition.
* trustlist.c (gpgme_op_trustlist_next): Pass argument in
invocation of _gpgme_wait_on_condition.
* engine-assuan.c (struct engine_llass): Replace members RESULT_CB
and RESULT_CB_VALUE by LAST_OP_ERR.
(_gpgme_engine_assuan_last_op_err): Add this hack function.
(llass_cancel_op): New function.
(_gpgme_engine_llass_ops): Add cancel_op member.
(llass_status_handler): Update opaque value access.
(llass_transact): Remove RESULT_CB and RESULT_CB_VALUE arguments.
* opassuan.c: Move compat hacks to the end of file.
(opassuan_start): Do not set OPD->result.err.
Do not pass RESULT_Cb and CTX to _gpgme_engine_op_assuan_transact.
(gpgme_op_assuan_transact_ext): New function.
* configure.ac: Add AC_TYPE_UINTPTR_T.
* assuan/assuan.h [_ASSUAN_IN_GPGME_BUILD_ASSUAN]: Declare
_gpgme_io_connect.
src/
2009-06-22 Marcus Brinkmann <marcus@g10code.de>
* debug.h: Everywhere, use %p instead of 0x%x to print pointer.
[HAVE_STDINT_H]: Include <stdint.h>.
(_TRACE, TRACE, TRACE0, TRACE1, TRACE2, TRACE3, TRACE6): Cast tag
to (uintptr_t) before casting it to (void*) to silence GCC
warning.
* gpgme.h.in (_GPGME_DEPRECATED_OUTSIDE_GPGME): New macro.
* sign.c (_GPGME_IN_GPGME): Define it.
* keylist.c (_GPGME_IN_GPGME): Define it.
* debug.c (_gpgme_debug_begin, _gpgme_debug_add): Handle error in
vasprintf and asprintf.
* priv-io.h: Include <sys/socket.h>. Declare _gpgme_io_connect.
tests/
2009-06-22 Marcus Brinkmann <marcus@g10code.de>
* gpg/t-support.h (passphrase_cb): Implement write() according to
the book to silence compiler warning.
* gpgsm/t-support.h (passphrase_cb): Likewise.
* assuan-pipe-connect.c (pipe_connect_gpgme): Do not close process
handle here. Use this function also on Unix systems.
gpgme/
2007-09-27 Marcus Brinkmann <marcus@g10code.de>
* w32-glib-io.c (_gpgme_io_spawn),
w32-qt-io.cpp (_gpgme_io_spawn), w32-io.c (_gpgme_io_spawn): Close
the process handle, return 0.
tests/
2007-09-27 Marcus Brinkmann <marcus@g10code.de>
* t-engine-info.c (check_engine_info): Fix debug output.
* gpg/Makefile.am (tests_unix): New variable.
(TESTS): Use it.
* gpg/t-support.h (passphrase_cb) [HAVE_W32_SYSTEM]: Use WriteFile instead of write.
* gpg/t-wait.c [HAVE_W32_SYSTEM]: Define sleep as _sleep.
2005-10-01 Marcus Brinkmann <marcus@g10code.de>
* gpgme.texi (Signature Notation Data): New section.
(Verify): Added more about the notation data structure.
gpgme/
2005-10-01 Marcus Brinkmann <marcus@g10code.de>
* gpgme.def: Add gpgme_data_set_file_name,
gpgme_data_get_file_name, gpgme_sig_notation_clear,
gpgme_sig_notation_add and gpgme_sig_notation_get.
* libgpgme.vers: Add gpgme_sig_notation_clear,
gpgme_sig_notation_add and gpgme_sig_notation_get.
* Makefile.am (libgpgme_real_la_SOURCES): Add sig-notation.c.
* context.h (struct gpgme_context): New field sig_notations.
* gpgme.h (struct _gpgme_sig_notation): New member value_len and
critical.
(GPGME_SIG_NOTATION_CRITICAL): New symbol.
(gpgme_sig_notation_flags_t): New type.
(gpgme_sig_notation_add, gpgme_sig_notation_clear,
gpgme_sig_notation_get): New prototypes.
* ops.h (_gpgme_sig_notation_create, _gpgme_sig_notation_free):
New prototypes.
* sig-notation.c (_gpgme_sig_notation_free): New file.
* verify.c (parse_notation): Use support functions.
(release_op_data): Likewise.
* rungpg.c (append_args_from_sig_notations): New function.
(gpg_encrypt_sign, gpg_sign): Call it.
tests/
2005-10-01 Marcus Brinkmann <marcus@g10code.de>
* gpg/Makefile.am (TESTS): Add t-sig-notation.
* gpg/t-sig-notation.c (check_result): New file.
* gpg/t-verify.c (check_result): Also check the length of the
notation data.
* gpg/gpg.conf: New file.
2005-06-03 Marcus Brinkmann <marcus@g10code.de>
* wait-global.c (gpgme_wait): Break out of the fd processing loop
after an error.
Reported by Igor Belyi <gpgme@katehok.ac93.org>.
tests/
2005-06-03 Marcus Brinkmann <marcus@g10code.de>
* gpg/Makefile.am (TESTS): Add t-wait.
* gpg/t-wait.c (main): New test.
* README: Refer to COPYING.LESSER and "each file" instead of
COPYING.
* COPYING.LESSER: New file.
* gpgme.spec.in (%doc): Add COPYING.LESSER.
* acinclude.m4, configure.ac, Makefile.am: Change license to LGPL
2.1 or later.
* TODO: Add copyright notice.
* README.CVS: Likewise.
assuan/
2004-12-07 Marcus Brinkmann <marcus@g10code.de>
* README.1st: Add copyright notice.
doc/
2004-12-07 Marcus Brinkmann <marcus@g10code.de>
* Makefile.am: Change license to LGPL.
(gpgme_TEXINFOS): Replace gpl.texi with lesser.texi.
* gpgme.texi: Change license to LGPL (also for documentation of
GPGME's license).
* lesser.texi: New file.
* gpl.texi: File removed.
gpgme/
2004-12-07 Marcus Brinkmann <marcus@g10code.de>
* putc_unlocked.c, funopen.c: I just claim copyright on these
files and change their license to LGPL, because they are totally
trivial wrapper functions.
* isascii.c: Change copyright notice to the one from ctype/ctype.h
in the GNU C Library (CVS Head 2004-10-10), where isascii is
defined as a macro doing exactly the same as the function in this
file.
* memrchr.c: Update from the GNU C Library (CVS Head 2001-07-06).
* stpcpy.c: Update from the GNU C Library (CVS Head 2004-10-10).
* ath.c, ath-compat.c, ath.h, ath-pth.c, ath-pth-compat.c,
ath-pthread.c, ath-pthread-compat.c, context.h, conversion.c,
data.c, data-compat.c, data-fd.c, data.h, data-mem.c,
data-stream.c, data-user.c, debug.c, debug.h, decrypt.c,
decrypt-verify.c, delete.c, edit.c, encrypt.c, encrypt-sign.c,
engine-backend.h, engine.c, engine-gpgsm.c, engine.h, error.c,
export.c, genkey.c, get-env.c, gpgme.c, gpgme.h, import.c, io.h,
key.c, keylist.c, mkstatus, Makefile.am, ops.h, op-support.c,
passphrase.c, posix-io.c, posix-sema.c, posix-util.c, progress.c,
rungpg.c, sema.h, sign.c, signers.c, trust-item.c, trustlist.c,
util.h, verify.c, version.c, w32-io.c, w32-sema.c, w32-util.c,
wait.c, wait-global.c, wait.h, wait-private.c, wait-user.c: Change
license to LGPL.
tests/
2004-12-07 Marcus Brinkmann <marcus@g10code.de>
* gpg/mkdemodirs: Add copyright notice.
* gpgsm/Makefile.am, gpgsm/t-support.h, gpgsm/t-decrypt.c,
gpgsm/t-encrypt.c, gpgsm/t-export.c, gpgsm/t-genkey.c,
gpgsm/t-import.c, gpgsm/t-keylist.c, gpgsm/t-sign.c,
gpgsm/t-verify.c, gpg/Makefile.am, gpg/t-decrypt.c,
gpg/t-decrypt-verify.c, gpg/t-edit.c, gpg/t-encrypt.c,
gpg/t-encrypt-sign.c, gpg/t-encrypt-sym.c, gpg/t-eventloop.c,
gpg/t-export.c, gpg/t-genkey.c, gpg/t-import.c, gpg/t-keylist.c,
gpg/t-keylist-sig.c, gpg/t-sign.c, gpg/t-signers.c,
gpg/t-support.h, gpg/t-thread1.c, gpg/t-trustlist.c,
gpg/t-verify.c, Makefile.am, t-data.c, t-engine-info.c,
t-version.c: Change license to LGPL.
* gpgsm/t-keylist.c (struct): Add new fields VALIDITY and
KEY_LENGTH.
(main): Use them.
* gpgsm/t-import.c (check_result): New argument total_stat.
(main): Pass this argument. Reduce number of total considered
keys to 1 for the second test.
* configure.ac: Bumbed LT_Revision; now at C12/A1/R1.
(NEED_GPGSM_VERSION): Set to 1.9.3.
* sign.c: Include util.h for prototype of _gpgme_parse_timestamp.
* gpg/t-keylist-sig.c (main): Temporary disabled one test due top
gpg 1.3.4 problems.
* gpg/t-import.c (check_result): Likewise.
* gpg/t-verify.c (check_result): Rewrote test for notations
because the order of notaions is not guaranteed.
* gpgsm/t-support.h (fail_if_err): Also print the numeric values.
2003-10-06 Marcus Brinkmann <marcus@g10code.de>
* gpgme.texi (Signal Handling): New section.
gpgme/
2003-10-06 Marcus Brinkmann <marcus@g10code.de>
* io.h (_gpgme_io_subsystem_init): New prototype.
* posix-io.c (_gpgme_io_subsystem_init): Add function.
(_gpgme_io_spawn): Do not fixup signal handler here.
* version.c (do_subsystem_inits): Call _gpgme_io_subsystem_init.
tests/
2003-10-06 Marcus Brinkmann <marcus@g10code.de>
* gpg/t-thread1.c (thread_one): Do not call initialize_gpgme.
Likewise.
2003-08-14 Marcus Brinkmann <marcus@g10code.de>
* gpgme.texi (Creating a Signature): Change type of member class
to unsigned int.
gpgme/
2003-08-14 Marcus Brinkmann <marcus@g10code.de>
* gpgme.h (struct _gpgme_new_signature): Rename member CLASS to
_OBSOLETE_CLASS, add member CLASS with type unsigned int.
* sign.c (parse_sig_created): Also set SIG->_unused_class for
backward compatibility.
tests/
2003-08-14 Marcus Brinkmann <marcus@g10code.de>
* gpg/t-sign.c (check_result): Change output format for signature
class to unsigned int.
* gpg/t-verify.c (check_result): Change type of SUMMARY to
unsigned int.
* gpg/t-decrypt-verify.c (check_verify_result): Likewise.
* gpg/t-keylist-sig.c (keys): Change type of member CLASS to
unsigned int.
* t-data.c (read_cb): Change type of AMOUNT to unsigned int.
* t-version.c (version): Remove unused variable.
2003-05-29 Marcus Brinkmann <marcus@g10code.de>
* gpgme.texi (Exporting Keys): Change and document prototypes.
Add new gpgme_op_export_ext and gpgme_op_export_ext_start
variants.
(Selecting Recipients): Section removed.
(Encrypting a Plaintext): Change prototypes and document the
changes.
gpgme/
2003-05-29 Marcus Brinkmann <marcus@g10code.de>
* gpgme.h (gpgme_op_export_start): Change second arg to const char *.
(gpgme_op_export): Likewise.
(gpgme_op_export_ext_start): New prototype.
(gpgme_op_export_ext): Likewise.
* engine.h: Likewise for _gpgme_engine_op_export and
_gpgme_engine_op_export_ext.
* engine-backend.h (struct engine_ops): Change second argument of
prototype of export to const char *, and add reserverd int as
third argument. Add prototype for export_ext.
* engine.c (_gpgme_engine_op_export_ext): New function.
(_gpgme_engine_op_export): Change second argument of prototype of
export to const char *, and add reserverd int as third argument.
* rungpg.c (gpg_export): Change second argument of prototype of
export to const char *, and add reserverd int as third argument.
(gpg_export_ext): New function.
(gpg_keylist_ext): Break loop at error.
(_gpgme_engine_ops_gpg): Add gpg_export_ext.
* engine-gpgsm.c (gpgsm_export): Change second argument of
prototype of export to const char *, and add reserverd int as
third argument.
(gpgsm_export_ext): New function.
(_gpgme_engine_ops_gpgsm): Add gpgsm_export_ext.
* export.c (export_start): Change second argument of prototype of
export to const char *, and add reserverd int as third argument.
(gpgme_op_export_start): Likewise.
(export_ext_start): New function.
(gpgme_op_export_ext_start): Likewise.
(gpgme_op_export_ext): Likewise.
* gpgme.h (gpgme_keylist_mode_t): New type for anonymous enum.
(gpgme_sigsum_t): New type for anonymous enum.
* encrypt-sign.c (encrypt_sign_start): Check for errors earlier,
and return an error if RECP is not set.
* Makefile.am (libgpgme_la_SOURCES): Remove user-id.c.
* user-id.c: Remove file.
* ops.h: Remove prototype for _gpgme_user_ids_all_valid.
* gpgme.h (gpgme_encrypt_flags_t): New type.
(gpgme_op_encrypt_start): Change second parameter to type
gpgme_key_t[], and add third parameter.
(gpgme_op_encrypt): Likewise.
(gpgme_op_encrypt_sign_start): Likewise.
(gpgme_op_encrypt_sign): Likewise.
* encrypt.c (encrypt_start): Likewise.
(gpgme_op_encrypt_start): Likewise.
(gpgme_op_encrypt): Likewise. Pass flags to engine.
* encrypt-sign.c (encrypt_sign_start): Likewise.
(gpgme_op_encrypt_sign_start): Likewise.
(gpgme_op_encrypt_sign): Likewise.
* engine-backend.h (struct engine_ops): Likewise for prototypes of
encrypt and encrypt_sign.
* engine.h: Likewise for prototypes of _gpgme_engine_op_encrypt
and _gpgme_engine_op_encrypt_sign.
* engine.c (_gpgme_engine_op_encrypt): Likewise.
(_gpgme_engine_op_encrypt_sign): Likewise.
* rungpg.c (gpg_encrypt): Likewise.
(gpg_encrypt_sign): Likewise.
* rungpg.c (gpg_encrypt): Check flags for always trust option.
* engine-gpgsm.c (gpgsm_encrypt): Likewise.
(set_recipients): Rewritten to use keys instead user IDs.
* rungpg.c (append_args_from_recipients): Rewritten to use keys
instead user IDs.
* encrypt.c (_gpgme_encrypt_status_handler): Change errors
returned to GPGME_Invalid_Key and GPGME_General_Error.
tests/
2003-05-29 Marcus Brinkmann <marcus@g10code.de>
* gpg/t-encrypt-sym.c (main): Adapt to new syntax.
* gpg/t-encrypt.c (main): Likewise.
* gpg/t-eventloop.c (main): Likewise.
* gpg/t-encrypt-sign.c (main): Likewise.
* gpgsm/t-export.c (main): Likewise.
* gpgsm/t-encrypt.c (main): Likewise.
* gpg/Makefile.am (TESTS): Order t-keylist and t-keylist-sig after
t-import.
* gpg/t-edit.c (edit_fnc): Work around gpg 1.2.2 bug by resetting
primary uid after setting expiration date.
* gpg/t-keylist.c: Change order of user IDs.
* gpg/t-keylist-sig.c: Likewise.
* gpg/t-import.c: Add support for gpg in CVS.
2003-05-27 Marcus Brinkmann <marcus@g10code.de>
* gpgme.texi (Passphrase Callback): Document new prototype.
gpgme/
2003-05-26 Marcus Brinkmann <marcus@g10code.de>
* engine.h (EngineCommandHandler): Change last argument to int fd.
* gpgme.h (gpgme_passphrase_cb_t): Rewritten to take parts of the
description and fd.
(gpgme_edit_cb_t): Change last argument to int fd.
* ops.h (_gpgme_passphrase_command_handler_internal): New prototype.
* passphrase.c: Include <assert.h>.
(op_data_t): Rename userid_hint to uid_hint, remove last_pw_handle.
(release_op_data): Check values before calling free.
(_gpgme_passphrase_status_handler): Likewise.
(_gpgme_passphrase_command_handler_internal): New function.
(_gpgme_passphrase_command_handler): Rewritten.
* edit.c (edit_status_handler): Pass -1 as fd argument.
(command_handler): Update prototype. New variable processed. Use
it to store return value of
_gpgme_passphrase_command_handler_internal which is now used
instead _gpgme_passphrase_command_handler. Use it also to check
if we should call the user's edit function. Pass fd to user's
edit function.
* rungpg.c (struct gpg_object_s): Change type of cmd.cb_data to
void *.
(gpg_release): Check value before calling free. Do not release
cmd.cb_data.
(command_cb): Function removed.
(command_handler): New function. Thus we don't use a data object
for command handler stuff anymore, but handle it directly. This
allows proper error reporting (cancel of passphrase requests, for
example). Also all callbacks work via direct writes to the file
descriptor (so that passphrases are not kept in insecure memory).
(gpg_set_command_handler): Rewritten to use even more ugly hacks.
(read_status): Check cmd.keyword before calling free. Install
command_handler as the I/O callback handler with GPG as private
data.
tests/
2003-05-27 Marcus Brinkmann <marcus@g10code.de>
* (t-decrypt-verify.c, t-decrypt.c, t-edit.c, t-encrypt-sign.c,
t-encrypt-sym.c, t-sign.c, t-signers.c): Include <unistd.h>.
(passphrase_cb): Rewritten.
* t-edit.c (edit_fnc): Rewritten.
In all files, replace the Gpgme* type names with the new gpgme_*
type names.
doc/
2003-05-18 Marcus Brinkmann <marcus@g10code.de>
* gpgme.texi (Header): Remove Gpgme as namespace prefix. Add
_GPGME to namespace prefix.
* gpgme.texi (Multi Threading): Add note about link order.
gpgme/
2003-05-18 Marcus Brinkmann <marcus@g10code.de>
* gpgme.h: The following types are renamed. The old name is kept
as a deprecated typedef.
(GpgmeCtx): Rename to gpgme_ctx_t.
(GpgmeData): Rename to gpgme_data_t.
(GpgmeRecipients): Rename to gpgme_recipients_t.
(GpgmeError): Rename to gpgme_error_t.
(GpgmeDataEncoding): Rename to gpgme_data_encoding_t.
(GpgmePubKeyAlgo): Rename to gpgme_pubkey_algo_t.
(GpgmeHashAlgo): Rename to gpgme_hash_algo_t.
(GpgmeSigStat): Rename to gpgme_sig_stat_t.
(GpgmeSigMode): Rename to gpgme_sig_mode_t.
(GpgmeAttr): Rename to gpgme_attr_t.
(GpgmeValidity): Rename to gpgme_validity_t.
(GpgmeProtocol): Rename to gpgme_protocol_t.
(GpgmeStatusCode): Rename to gpgme_status_code_t.
(GpgmeEngineInfo): Rename to gpgme_engine_info_t.
(GpgmeSubkey): Rename to gpgme_subkey_t.
(GpgmeKeySig): Rename to gpgme_keysig_t.
(GpgmeUserID): Rename to gpgme_user_id_t.
(GpgmePassphraseCb): Rename to gpgme_passphrase_cb_t.
(GpgmeProgressCb): Rename to gpgme_progress_cb_t.
(GpgmeEditCb): Rename to gpgme_edit_cb_t.
(GpgmeIOCb): Rename to gpgme_io_cb_t.
(GpgmeRegisterIOCb): Rename to gpgme_register_io_cb_t.
(GpgmeRemoveIOCb): Rename to gpgme_remove_io_cb_t.
(GpgmeEventIO): Rename to gpgme_event_io_t.
(GpgmeEventIOCb): Rename to gpgme_event_io_cb_t.
(GpgmeIOCbs): Rename to gpgme_io_cbs.
(gpgme_io_cbs_t): New type.
(GpgmeDataReadCb): Rename to gpgme_data_read_cb_t.
(GpgmeDataWriteCb): Rename to gpgme_data_write_cb_t.
(GpgmeDataSeekCb): Rename to gpgme_data_seek_cb_t.
(GpgmeDataReleaseCb): Rename to gpgme_data_release_cb_t.
(GpgmeDataCbs): Rename to gpgme_data_cbs.
(gpgme_data_cbs_t): New type.
(GpgmeInvalidUserID): Rename to gpgme_invalid_user_id_t.
(GpgmeEncryptResult): Rename to gpgme_encrypt_result_t.
(GpgmeDecryptResult): Rename to gpgme_decrypt_result_t.
(GpgmeNewSignature): Rename to gpgme_new_signature_t.
(GpgmeSignResult): Rename to gpgme_sign_result_t.
(GpgmeSigNotation): Rename to gpgme_sig_notation_t.
(GpgmeSignature): Rename to gpgme_signature_t.
(GpgmeVerifyResult): Rename to gpgme_verify_result_t.
(GpgmeImportStatus): Rename to gpgme_import_status_t.
(GpgmeImportResult): Rename to gpgme_import_result_t.
(GpgmeGenKeyResult): Rename to gpgme_genkey_result_t.
(GpgmeKeyListResult): Rename to gpgme_keylist_result_t.
(GpgmeTrustItem): Rename to gpgme_trust_item_t.
* gpgme.h (gpgme_deprecated_error_t): New type, swallowing macros
GPGME_No_Recipients, GPGME_Invalid_Recipient and
GPGME_No_Passphrase.
* data.h (struct gpgme_data_s): Rename to struct gpgme_data.
* context.h (struct gpgme_context_s): Rename to struct
gpgme_context.
(struct gpgme_recipients_s): Rename to gpgme_recipients.
2003-04-30 Marcus Brinkmann <marcus@g10code.de>
* gpgme.texi (Key Listing Mode): Add GPGME_KEYLIST_MODE_SIGS.
(Manipulating Keys): Add obsoleteness note.
(Key Signatures): Likewise.
(Information About Keys): Likewise.
(Key Management): Add new data types GpgmeSubkey, GpgmeKeySig,
GpgmeUserID, and all the information about GpgmeKey.
gpgme/
2003-04-30 Marcus Brinkmann <marcus@g10code.de>
* gpgme.h (struct _gpgme_key): New structure.
(GpgmeKey): Define using _gpgme_key.
(struct _gpgme_subkey): New structure.
(GpgmeSubKey): New type.
(struct _gpgme_key_sig): New structure.
(GpgmeKeySig): New type.
(struct _gpgme_user_id): New structure.
(GpgmeUserID): New type.
(struct _gpgme_op_keylist_result): New structure.
(GpgmeKeyListResult): New type.
(gpgme_op_keylist_result): New function.
(gpgme_key_get_as_xml): Remove prototype.
* context.h (struct gpgme_context_s): Remove members tmp_key,
tmp_uid, key_cond and key_queue.
(struct key_queue_item_s): Remove structure.
(struct user_id_s): Remove structure.
(struct gpgme_recipients_s): Replace with simple
GpgmeUserID list.
* gpgme.c (gpgme_release): Do not release CTX->tmp_key.
* ops.h (_gpgme_key_add_subkey, _gpgme_key_append_name,
_gpgme_key_add_sig, _gpgme_trust_item_new): New prototypes.
* rungpg.c (command_cb): Return GpgmeError instead int.
New variable ERR. Use it to hold return value of cmd handler.
(gpg_delete): Access fingerprint of key directly.
(append_args_from_signers): Likewise.
(gpg_edit): Likewise.
(append_args_from_recipients): Use GpgmeUserID for recipient list.
* engine-gpgsm.c: Do not include "key.h".
(gpgsm_delete): Access fingerprint of key directly.
(gpgsm_sign): Likewise.
(set_recipients): Use GpgmeUserID for recipients. Invert invalid
user ID flag.
* key.h: File removed.
* key.c: Completely reworked to use exposed GpgmeKey data types.
* keylist.c: Likewise.
* recipient.c: Completely reworked to use GpgmeUserID.
tests/
2003-04-30 Marcus Brinkmann <marcus@g10code.de>
* gpg/t-keylist.c: Rewritten.
* gpgsm/t-keylist.c (main): Rewritten.
* gpg/t-edit.c (main): Do not use gpgme_key_get_as_xml. Use
gpgme_key_unref instead gpgme_key_release.
* gpg/t-signers.c (main): Use gpgme_key_unref instead
gpgme_key_release.
2003-04-29 Marcus Brinkmann <marcus@g10code.de>
* gpgme.texi (Trust Item Management): Add data members of
GpgmeTrustItem type.
(Information About Trust Items): Add note about obsoleteness.
(Manipulating Trust Items): Add gpgme_trust_item_ref and
gpgme_trust_item_unref.
gpgme/
2003-04-29 Marcus Brinkmann <marcus@g10code.de>
* gpgme.h (struct _gpgme_trust_item): New structure.
(GpgmeTrustItem): New type.
(gpgme_trust_item_ref, gpgme_trust_item_unref): New prototypes.
* context.h (struct trust_queue_item_s): Remove structure.
(struct gpgme_context_s): Remove trust_queue member.
* Makefile.am (libgpgme_la_SOURCES): Add trust-item.c.
* trust-item.c: New file.
* trustlist.c: Do not include <stdio.h> or <time.h>, but
"gpgme.h".
(struct trust_queue_item_s): Change to new type op_data_t.
(trust_status_handler): Change first argument to void *.
(trust_colon_handler): Likewise.
(_gpgme_op_trustlist_event_cb): Use op_data_t type.
(gpgme_op_trustlist_start): Use op_data_t and rework error
handling.
(gpgme_op_trustlist_next): Use op_data_t.
(gpgme_trust_item_release): Remove function.
(gpgme_trust_item_get_string_attr): Likewise.
(gpgme_trust_item_get_int_attr): Likewise.
tests/
2003-04-29 Marcus Brinkmann <marcus@g10code.de>
* gpg/t-trustlist.c: Rewritten.
2003-04-28 Marcus Brinkmann <marcus@g10code.de>
* gpgme.texi (Verify): Rewritten to take into account new and
deprecated functions and data types.
gpgme/
2003-04-28 Marcus Brinkmann <marcus@g10code.de>
* gpgme.h (struct _gpgme_sig_notation): New structure.
(GpgmeSigNotation): New type.
(struct _gpgme_signature): New structure.
(GpgmeSignature): New type.
(struct _gpgme_op_verify_result): New structure.
(GpgmeVerifyResult): New type.
(gpgme_op_verify_result): New prototype.
(gpgme_get_notation): Remove prototype.
* ops.h (_gpgme_op_verify_init_result): New prototype.
(_gpgme_verify_status_handler): Change first argument to void *.
* util.h (_gpgme_decode_percent_string, _gpgme_map_gnupg_error):
New prototypes.
* conversion.c (_gpgme_decode_percent_string): New function.
(gnupg_errors): New static global.
(_gpgme_map_gnupg_error): New function.
* gpgme.c (gpgme_release): Don't release CTX->notation.
(gpgme_get_notation): Remove function.
* decrypt-verify.c (_gpgme_op_decrypt_verify_start): Call
_gpgme_op_verify_init_result.
* verify.c: Do not include <stdio.h>, <assert.h> and "key.h", but
do include "gpgme.h".
(struct verify_result): Replace with ...
(op_data_t): ... this type.
(release_verify_result): Remove function.
(release_op_data): New function.
(is_token): Remove function.
(skip_token): Remove function.
(copy_token): Remove function.
(gpgme_op_verify_result): New function.
(calc_sig_summary): Rewritten.
(finish_sig): Remove function.
(parse_new_sig): New function.
(parse_valid_sig): New function.
(parse_notation): New function.
(parse_trust): New function.
(parse_error): New function.
(_gpgme_verify_status_handler): Rewritten. Change first argument
to void *.
(_gpgme_op_verify_start): Rework error handling. Call
_gpgme_op_verify_init_result.
(gpgme_op_verify): Do not release or clear CTX->notation.
(gpgme_get_sig_status): Rewritten.
(gpgme_get_sig_string_attr): Likewise.
(gpgme_get_sig_ulong_attr): Likewise.
(gpgme_get_sig_key): Likewise.
2003-04-28 Marcus Brinkmann <marcus@g10code.de>
* gpgme.texi (Decrypt): Descript gpgme_op_decrypt_result and
GpgmeDecryptResult.
gpgme
2003-04-28 Marcus Brinkmann <marcus@g10code.de>
* gpgme.h (struct _gpgme_op_decrypt_result): New structure.
(GpgmeDecryptResult): New type.
(gpgme_op_decrypt_result): New prototype.
* ops.h (_gpgme_op_decrypt_init_result): New prototype.
(_gpgme_decrypt_status_handler): Fix prototype.
(_gpgme_decrypt_start): Remove prototype.
* decrypt-verify.c: Do not include <stdio.h>, <stdlib.h>,
<string.h> and <assert.h>, "util.h" and "context.h", but
"gpgme.h".
(decrypt_verify_status_handler): Change first argument to void *,
and rework error handling.
(_gpgme_op_decrypt_verify_start): New function.
(gpgme_op_decrypt_verify_start): Rewrite using
_gpgme_op_decrypt_verify_start.
(gpgme_op_decrypt_verify): Likewise.
* decrypt.c: Include <string.h>, "gpgme.h" and "util.h".
(struct decrypt_result): Change to typedef op_data_t, rewritten.
(is_token): Remove function.
(release_op_data): New function.
(skip_token): Remove function.
(gpgme_op_decrypt_result): New function.
(_gpgme_decrypt_status_handler): Change first argument to void *.
Rework error handling.
(_gpgme_decrypt_start): Rename to ...
(decrypt_start): ... this. Call _gpgme_op_decrypt_init_result.
(_gpgme_op_decrypt_init_result): New function.
(gpgme_op_decrypt_start): Use decrypt_start.
(gpgme_op_decrypt): Likewise.
tests/
2003-04-28 Marcus Brinkmann <marcus@g10code.de>
* gpg/t-decrypt.c: Rewritten.
2003-04-27 Marcus Brinkmann <marcus@g10code.de>
* gpgme.texi (Encrypting a Plaintext): Add info about
GpgmeEncryptResult and gpgme_op_encrypt_result.
gpgme/
2003-04-27 Marcus Brinkmann <marcus@g10code.de>
* gpgme.h (GpgmeEncryptResult): New data type.
(gpgme_op_encrypt_result): New prototype.
* ops.h (_gpgme_op_encrypt_init_result): New prototype.
(_gpgme_op_encrypt_status_handler): Fix prototype.
* encrypt-sign.c (_gpgme_op_encrypt_sign_start): Call
_gpgme_op_encrypt_init_result.
* encrypt.c: Do not include <stdio.h>, <assert.h>, "util.h" and
"wait.h". Include <errno.h> and "gpgme.h".
(SKIP_TOKEN_OR_RETURN): Remove macro.
(struct encrypt_result): Rename to ...
(op_data_t): ... new data type. Rewrite for user result data.
(append_xml_encinfo): Remove function.
(release_op_data): New function.
(gpgme_op_encrypt_result): New function.
(_gpgme_op_encrypt_status_handler): Change first argument to void *.
Rewrite result parsing.
(_gpgme_op_encrypt_sym_status_handler): Change first argument to
void *.
(_gpgme_op_encrypt_init_result): New function.
(_gpgme_op_encrypt_start): Rename to ...
(encrypt_start): ... this.
(gpgme_op_encrypt_start): Use encrypt_start, not
gpgme_op_encrypt_start.
(gpgme_op_encrypt): Likewise.
tests/
2003-04-27 Marcus Brinkmann <marcus@g10code.de>
* gpg/t-sign.c: Rewritten.
* gpgsm/t-sign.c: Rewritten.
* gpg/t-encrypt.c: Check for invalid recipients.
* gpgsm/t-encrypt.c: Likewise.
2003-04-24 Marcus Brinkmann <marcus@g10code.de>
* gpgme.texi (Generating Keys): Document changed gpgme_op_genkey
and new gpgme_op_genkey_result function. Document
GpgmeGenKeyResult data type.
gpgme/
2003-04-24 Marcus Brinkmann <marcus@g10code.de>
* gpgme.h (struct _gpgme_op_genkey_result): New structure.
(GpgmeGenKeyResult): New type.
(gpgme_op_genkey): Drop last argument.
(gpgme_op_genkey_result): New function.
* genkey.c: Do not include "util.h", but "gpgme.h".
(struct genkey_result): Replace with ...
(op_data_t): ... this new type.
(release_genkey_result): Replace with ...
(release_op_data): ... this new function.
(gpgme_op_genkey_result): New function.
(genkey_status_handler): Rewritten using new op_data_t type.
(get_key_parameter): New function.
(_gpgme_op_genkey_start): Renamed to
(genkey_start): ... this and rewritten.
(gpgme_op_genkey_start): Use genkey_start instead
_gpgme_op_genkey_start.
(gpgme_op_genkey): Rewritten. Remove FPR argument.
tests/
2003-04-24 Marcus Brinkmann <marcus@g10code.de>
* gpg/t-genkey.c: Rewritten to match new semantics.
2003-02-06 Marcus Brinkmann <marcus@g10code.de>
* gpgme.texi (Cancelling an Operation): Removed.
(Passphrase Callback): Document new type for GpgmePassphraseCb.
gpgme/
2003-02-06 Marcus Brinkmann <marcus@g10code.de>
* gpgme.h (GpgmePassphraseCb): Change type to return GpgmeError,
and add argument for returning the result string.
(gpgme_cancel): Remove prototype.
* gpgme.c (gpgme_cancel): Remove function.
* context.h (struct gpgme_context_s): Remove member cancel.
* passphrase.c (_gpgme_passphrase_command_handler): Call the
passphrase callback in the new way.
tests/
2003-02-06 Marcus Brinkmann <marcus@g10code.de>
* gpg/t-decrypt.c (passphrase_cb): Fix to new prototype.
* gpg/t-decrypt-verify.c (passphrase_cb): Likewise.
* gpg/t-edit.c (passphrase_cb): Likewise.
* gpg/t-encrypt-sign.c (passphrase_cb): Likewise.
* gpg/t-encrypt-sym.c (passphrase_cb): Likewise.
* gpg/t-sign.c (passphrase_cb): Likewise.
* gpg/t-signers.c (passphrase_cb): Likewise.
