| Commit message (Collapse) | Author | Files | Lines |
|---|
|
* tools/card-yubikey.c (yubikey_commands): Add new arg INFO and test
for Yubikey-5.
* tools/gpg-card.c (cmd_yubikey): Pass info to yubikey_commands.
--
The configuration can be read from a Yubikey-4 but not be written.
The mode command is also not useful because it allows only the
selection of transports. It does not allow to disable single
applications based on one transport (like OPGP and PIV). Thsi patch
shows an appropriate error message.
Signed-off-by: Werner Koch <[email protected]>
|
|
* scd/app.c (app_new_register): Set card version for Yubikeys.
(app_write_learn_status): Print CARDVERSION and APPVERSION.
* tools/card-call-scd.c (learn_status_cb): Detect them.
* tools/gpg-card.h (struct card_info_s): Add appversion and
cardversion.
* tools/gpg-card.c (list_openpgp): Remove version printing from serial
number.
(print_a_version): New.
(list_card): Print card and app version.
(cmd_generate): Do not allow broken Yubikeys.
Signed-off-by: Werner Koch <[email protected]>
|
|
* scd/app-piv.c (concat_tlv_list): Add arg 'secure' and adjust
callers.
(writekey_rsa, writekey_ecc): New.
(do_writekey): New.
(do_writecert): Provide a better error message for an empty cert.
(app_select_piv): Register do_writekey.
* scd/iso7816.c (iso7816_send_apdu): New.
* scd/app-common.h (APP_WRITEKEY_FLAG_FORCE): New.
* agent/command.c (cmd_keytocard): Make the timestamp optional.
* tools/card-call-scd.c (inq_writekey_parms): Remove.
(scd_writekey): Rewrite.
* tools/gpg-card.c (cmd_writekey): New.
(enum cmdids): Add cmdWRITEKEY.
(dispatch_command, interactive_loop): Call cmd_writekey.
--
This has been tested with gpgsm and RSA keys. For ECC keys only
partly tested using the sample OpenPGP nistp256 and nistp384 keys
because gpgsm does not yet support ECC certificates and thus we can't
write the certificates to the cert object after a writekey. Note that
they nevertheless show up in "gpgcard list" because gpg-card searches
for them in gpg and gpgsm. However, this does not work completely.
Signed-off-by: Werner Koch <[email protected]>
|
|
* tools/card-tool-keys.c: Rename to card-keys.c.
* tools/card-tool-misc.c: Rename to card-misc.c.
* tools/card-tool-yubikey.c: Rename to card-yubikey.c.
* tools/card-tool.h: Rename to gpg-card.h.
* tools/gpg-card-tool-w32info.rc: Rename to gpg-card-w32info.rc
* doc/card-tool.texi: Rename top gpg-card.texi
Signed-off-by: Werner Koch <[email protected]>
|
|
* tools/card-call-scd.c (learn_status_cb): Handle extended
KEYPARIRINFO.
* tools/card-tool.h (struct key_info_s): Add field 'usage'.
* tools/gpg-card-tool.c (list_one_kinfo): Show usage flags.
Signed-off-by: Werner Koch <[email protected]>
|
|
* tools/card-tool-yubikey.c: New.
* tools/Makefile.am (gpg_card_tool_SOURCES): Add it.
* tools/card-call-scd.c (scd_apdu): Allow returning data.
* tools/card-tool-misc.c (send_apdu): New. Move from gpg-card-tool.c
and let it return data. Change all callers.
* tools/gpg-card-tool.c (cmd_writecert): Prepend the certref with the
current application type.
(cmd_yubikey): New.
--
This command allows listing of active applications and to enable or
disable selected applications. This is in particular useful to
disable the OpenPGP application so that the PIV support can easily be
tested.
Signed-off-by: Werner Koch <[email protected]>
|
|
* tools/card-tool-misc.c (pubkey_algo_string): Move to ...
* common/sexputil.c (pubkey_algo_string): here.
--
The new gpg format for public key algorithms is useful at other places
as well. Thus we make this new function available. Note that the
code we use in gpg is not based on s-expressions and thus a new
function was required.
Signed-off-by: Werner Koch <[email protected]>
|
|
* tools/card-call-scd.c (scd_genkey_cb): Make createtime optional.
(scd_genkey_cb): Ditto. Add arg algo.
* tools/gpg-card-tool.c (cmd_generate): Add options and factor card
specific code out to ...
(generate_openpgp, generate_generic): new functions.
--
This patch keeps the interactive OpenPGP mode but adds a pure command
line mode for other cards; in particular PIV cards. What we still
need to do is:
a) Add an interactive mode for PIV cards
b) Add a command line mode for OpenPGP cards.
Signed-off-by: Werner Koch <[email protected]>
|
|
* tools/card-call-scd.c (scd_readkey): New.
* tools/card-tool-misc.c (pubkey_algo_string): New.
* tools/gpg-card-tool.c (list_one_kinfo): Print the algo.
--
It is convenient to see the actual algorithm of keys even if no
certificate has yet been created.
Signed-off-by: Werner Koch <[email protected]>
|
|
* scd/app-openpgp.c (do_change_pin): Allow prefixing the CHVNO with
"OPENPGP."
* tools/card-call-scd.c (scd_change_pin): Change API to use strings.
* tools/gpg-card-tool.c (cmd_passwd): Adjust for change.
(cmd_unblock): Ditto.
--
The generic keyref allows for better error detection in case a keyref
is send to a wrong card.
Signed-off-by: Werner Koch <[email protected]>
|
|
* tools/card-tool.h (opt): Add field 'initialized'.
* tools/card-call-scd.c (scd_learn): Set it.
* tools/gpg-card-tool.c (main): Reworked.
(dispatch_command): New.
--
This work is not yet finished because most commands need some tweaks
for non-interactive work. What you already can do are things like:
$ gpg-card-tool list -- 'auth <oldkey' \
-- auth --setkey --raw 123456781234567812345678 -- help auth
Which will list the current card, authenticate using a hex encoded key
from the file "oldkey", set the new admin key to "123...78", and print
help for the auth command. Note that the -- acts as a delimiter
between commands. To use a double dash as argument to a command the
entire command must be quoted.
Signed-off-by: Werner Koch <[email protected]>
|
|
* tools/card-tool-misc.c (hex_to_buffer): New.
* tools/gpg-card-tool.c (get_data_from_file): Change to allow returning
a string.
(cmd_authenticate): New.
(cmds): Add command "authenticate".
Signed-off-by: Werner Koch <[email protected]>
|
|
* tools/card-tool-keys.c (keyblock_cache): New var.
(release_keyblock): Factor code out to a new do_release_keyblock. Add
a cache.
(flush_keyblock_cache): New.
(get_matching_keys): Use the cache.
* tools/gpg-card-tool.c (cmds): Add command "reset".
(interactive_loop): Implement reset.
--
Signed-off-by: Werner Koch <[email protected]>
|
|
* tools/card-tool-keys.c: New.
* tools/Makefile.am (gpg_card_tool_SOURCES): Add file.
* tools/card-tool.h (struct pubkey_s, pubkey_t): New.
(struct userid_s, userid_t): New.
(struct keyblock_s, keyblock_t): New.
* common/util.h (GNUPG_PROTOCOL_): New const
* tools/gpg-card-tool.c (aTest): Add temporary command.
(list_one_kinfo): Print info from gpg and gpgsm.
Signed-off-by: Werner Koch <[email protected]>
|
|
* scd/app-common.h (struct app_ctx_s): Add field cardtype.
* scd/app.c (app_new_register): Set cardtype for yubikey.
(app_getattr): Add CARDTYPE.
(app_write_learn_status): Emit new attribute.
* scd/app-piv.c (do_getattr): Add CHV-USAGE.
(do_learn_status): Emit it.
* tools/card-tool.h (struct card_info_s): Add field cardtype.
* tools/card-call-scd.c (learn_status_cb): Parse "CARDTYPE".
* tools/gpg-card-tool.c (list_piv): Print PIN usage policy.
(list_card): Print card type.
(cmd_factoryreset): Implement for Yubikey with PIV.
Signed-off-by: Werner Koch <[email protected]>
|
|
* scd/app-piv.c (do_learn_status): Print CHV-STATUS.
* tools/card-tool.h (struct card_info_s): Rename chvretry to chvinfo.
* tools/card-call-scd.c (learn_status_cb): Depend CHV-STATUS on app
type.
* tools/gpg-card-tool.c (list_piv): New.
Signed-off-by: Werner Koch <[email protected]>
|
|
* tools/card-tool-misc.c: New.
* tools/card-tool.h: Rewored data structures for key infos.
* tools/gpg-card-tool.c: Ditto.
* tools/card-call-scd.c: Ditto.
--
Note that this also changes the way the key information is printed.
Formerly we printed it like:
Signature key ....: <openpgp-fingerprint>
created ....: <timestamp>
keygrip ... : <keygrip>
now we do:
Signature key ....: <keygrip>
fingerprint : <openpgp-fingerprint>
created ....: <timestamp>
This is because a keygrip is always available but a fingerprint and
the creation date are properties of an OpenPGP card. A standard way
of listing keys is better than one depending on the type of card.
Signed-off-by: Werner Koch <[email protected]>
|
|
* tools/card-call-scd.c: New.
* tools/card-tool.h: new.
* tools/gpg-card-tool.c: Largely extended.
--
gpg-card-tool will eventually replace the --card-edit command of gpg
because it makes more sense to have a multi-protocol aware tool and
not just one for OpenPGP cards. Most OpenPGP card things works now
but a few, those which require close interaction with gpg, still need
to be implemented. And of course the whole planned non-interactive
stuff needs to be written.
Signed-off-by: Werner Koch <[email protected]>
|
