aboutsummaryrefslogtreecommitdiffstats
path: root/scd/apdu.c (unfollow)
Commit message (Collapse)AuthorFilesLines
2016-11-22scd: Fix receive buffer size.NIIBE Yutaka1-2/+3
* scd/apdu.c (send_le): Fix the size, adding two for status bytes to Le. -- This is long standing bug. So far, Le was not exact value. Since forthcoming change will introduce exact value of expected length of response data, this change is needed. Signed-off-by: NIIBE Yutaka <[email protected]>
2016-11-17scd: Don't limit to ST-2xxx for PC/SC.NIIBE Yutaka1-1/+5
* scd/apdu.c (pcsc_vendor_specific_init): Only check vender ID. -- Some other products by Cherry works with pinpad, although it only works for smaller keys (RSA 1024). TPDU support is good for larger keys. Signed-off-by: NIIBE Yutaka <[email protected]>
2016-11-05Change all http://www.gnu.org in license notices to https://Werner Koch1-1/+1
--
2016-10-27Fix typos.Justus Winter1-1/+1
-- Signed-off-by: Justus Winter <[email protected]>
2016-09-02scd: Clean up unused shutdown method.NIIBE Yutaka1-48/+0
* scd/apdu.c (shutdown_ccid_reader, apdu_shutdown_reader): Remove. (reset_ccid_reader): Don't set shutdown_reader. * scd/ccid-driver.c (ccid_shutdown_reader): Remove. -- Signed-off-by: NIIBE Yutaka <[email protected]>
2015-12-10scd: Fix removal of unplugged usb readers on Windows.Daniel Hoffend1-0/+3
* scd/apdu.c (pcsc_error_to_sw): map PCSC_E_NO_SERVICE and PCSC_E_SERVICE_STOPPED to the internal SW_HOST_NO_READER error code. -- Signed-off-by: Daniel Hoffend <[email protected]> GnuPG-bug-id: 2167 In Windows 8 (and later), PC/SC service only runs when reader/token is plugged in. After its removal, it returns PCSC_E_NO_SERVICE error. This error should be handled as no reader. This comment is by gniibe.
2015-12-03scd: Fix "Conflicting usage" bug.NIIBE Yutaka1-2/+5
* scd/apdu.c (apdu_close_reader): Call CLOSE_READER method even if we got an error from apdu_disconnect. * scd/app-common.h (no_reuse): Remove. * scd/app.c (application_notify_card_reset): Deallocate APP here. (select_application, release_application): Don't use NO_REUSE. -- Reproducible scenario: Invoke gpg --card-edit session from a terminal. Invoke another gpg --card-edit session from another. Remove a token. Insert a token again. Type RET on both terminals. One of terminal answers "Conflicting usage". Perhaps, having NO_REUSE field was to avoid race conditions. Now, APP can be safely deallocated by application_notify_card_reset. Thanks to the2nd.
2015-11-17Fix typos found using codespell.Justus Winter1-5/+5
* agent/cache.c: Fix typos. * agent/call-pinentry.c: Likewise. * agent/call-scd.c: Likewise. * agent/command-ssh.c: Likewise. * agent/command.c: Likewise. * agent/divert-scd.c: Likewise. * agent/findkey.c: Likewise. * agent/gpg-agent.c: Likewise. * agent/w32main.c: Likewise. * common/argparse.c: Likewise. * common/audit.c: Likewise. * common/audit.h: Likewise. * common/convert.c: Likewise. * common/dotlock.c: Likewise. * common/exechelp-posix.c: Likewise. * common/exechelp-w32.c: Likewise. * common/exechelp-w32ce.c: Likewise. * common/exechelp.h: Likewise. * common/helpfile.c: Likewise. * common/i18n.h: Likewise. * common/iobuf.c: Likewise. * common/iobuf.h: Likewise. * common/localename.c: Likewise. * common/logging.c: Likewise. * common/openpgp-oid.c: Likewise. * common/session-env.c: Likewise. * common/sexputil.c: Likewise. * common/sysutils.c: Likewise. * common/t-sexputil.c: Likewise. * common/ttyio.c: Likewise. * common/util.h: Likewise. * dirmngr/cdblib.c: Likewise. * dirmngr/certcache.c: Likewise. * dirmngr/crlcache.c: Likewise. * dirmngr/dirmngr-client.c: Likewise. * dirmngr/dirmngr.c: Likewise. * dirmngr/dirmngr_ldap.c: Likewise. * dirmngr/dns-stuff.c: Likewise. * dirmngr/http.c: Likewise. * dirmngr/ks-engine-hkp.c: Likewise. * dirmngr/ks-engine-ldap.c: Likewise. * dirmngr/ldap-wrapper.c: Likewise. * dirmngr/ldap.c: Likewise. * dirmngr/misc.c: Likewise. * dirmngr/ocsp.c: Likewise. * dirmngr/validate.c: Likewise. * g10/encrypt.c: Likewise. * g10/getkey.c: Likewise. * g10/gpg.c: Likewise. * g10/gpgv.c: Likewise. * g10/import.c: Likewise. * g10/keydb.c: Likewise. * g10/keydb.h: Likewise. * g10/keygen.c: Likewise. * g10/keyid.c: Likewise. * g10/keylist.c: Likewise. * g10/keyring.c: Likewise. * g10/mainproc.c: Likewise. * g10/misc.c: Likewise. * g10/options.h: Likewise. * g10/packet.h: Likewise. * g10/parse-packet.c: Likewise. * g10/pkclist.c: Likewise. * g10/pkglue.c: Likewise. * g10/plaintext.c: Likewise. * g10/server.c: Likewise. * g10/sig-check.c: Likewise. * g10/sqlite.c: Likewise. * g10/tdbio.c: Likewise. * g10/test-stubs.c: Likewise. * g10/tofu.c: Likewise. * g10/trust.c: Likewise. * g10/trustdb.c: Likewise. * g13/create.c: Likewise. * g13/mountinfo.c: Likewise. * kbx/keybox-blob.c: Likewise. * kbx/keybox-file.c: Likewise. * kbx/keybox-init.c: Likewise. * kbx/keybox-search-desc.h: Likewise. * kbx/keybox-search.c: Likewise. * kbx/keybox-update.c: Likewise. * scd/apdu.c: Likewise. * scd/app-openpgp.c: Likewise. * scd/app-p15.c: Likewise. * scd/app.c: Likewise. * scd/ccid-driver.c: Likewise. * scd/command.c: Likewise. * scd/iso7816.c: Likewise. * sm/base64.c: Likewise. * sm/call-agent.c: Likewise. * sm/call-dirmngr.c: Likewise. * sm/certchain.c: Likewise. * sm/gpgsm.c: Likewise. * sm/import.c: Likewise. * sm/keydb.c: Likewise. * sm/minip12.c: Likewise. * sm/qualified.c: Likewise. * sm/server.c: Likewise. * tools/gpg-check-pattern.c: Likewise. * tools/gpgconf-comp.c: Likewise. * tools/gpgkey2ssh.c: Likewise. * tools/gpgparsemail.c: Likewise. * tools/gpgtar.c: Likewise. * tools/rfc822parse.c: Likewise. * tools/symcryptrun.c: Likewise. Signed-off-by: Justus Winter <[email protected]>
2015-11-09scd: Add reder information to --card-status.NIIBE Yutaka1-1/+10
* g10/call-agent.h, g10/call-agent.c (agent_release_card_info) g10/card-util.c (card_status): Add READER. * scd/apdu.c (close_ccid_reader, open_ccid_reader): Handle RDRNAME. (apdu_get_reader_name): New. * scd/ccid-driver.c (ccid_open_reader): Add argument to RDRNAME_P. * scd/command.c (cmd_learn): Return READER information.
2015-09-28scd: Handle error correctly.NIIBE Yutaka1-5/+5
* scd/apdu.c (apdu_connect): Initialize variables and check an error of apdu_get_status_internal.
2015-06-23scd: pinpad workaround for PC/SC implementations.NIIBE Yutaka1-4/+12
* scd/adpu.c (pcsc_pinpad_verify, pcsc_pinpad_modify): Bigger buffer for TPDU card reader. -- GnuPG-bug-id: 2003, 2004 This is needed for PC/SC on Debian Jessie. Note that it's not only for Cherry ST-2000, but also, for any TPDU card readers.
2015-06-22scd: Fix Cherry ST-2000 support for pinpad input.NIIBE Yutaka1-4/+12
* scd/apdu.c (pcsc_vendor_specific_init): Set pinmax to 15. * scd/ccid-driver.c (ccid_transceive_secure): Add zero for the template of APDU. -- GnuPG-bug-id: 2003, 2004
2015-04-30scd: PC/SC reader selection by partial string match.NIIBE Yutaka1-4/+8
* scd/apdu.c (open_pcsc_reader_direct): Partial string match. -- The card reader name by PC/SC service might include USB bus, which varies (on some platform like GNU/Linux). Thus, it's better to match partial string. Original patch was submitted by anstein. I changed it to fallback to the first reader if no match found. Note that we need to change pcsc-wrapper.c in 2.0 backport. GnuPG-bug-id: 1618, 1930
2015-04-14scd: better handling of extended APDU.NIIBE Yutaka1-2/+4
* scd/apdu.c (send_le): Bug fix for not append Z when lc<0&&le<0. * scd/app-common.h (struct app_ctx_s): Use bit fields for flags. * scd/ccid-driver.c (CCID_MAX_BUF): New. Only for OpenPGPcard. (struct ccid_driver_s): New field of max_ccid_msglen. Remove ifsd field. (parse_ccid_descriptor): Initialize max_ccid_msglen. (ccid_transceive_apdu_level): Implement sending extended APDU in chain of CCID message. -- With this patch, we won't need PC/SC library/service any more. GnuPG-bug-id: 1947
2015-03-15scd: Fix possible NULL deref in apdu.cWerner Koch1-3/+7
* scd/apdu.c (control_pcsc_direct): Take care of BUFLEN being NULL. (control_pcsc_wrapped): Ditto. -- pcsc_vendor_specific_init calls the above with BUFFER and BUFLEN as NULL. Reported by Stack 0.3: bug: anti-dce model: | control_pcsc.exit77: %retval.0.i.i76 = phi i32 [ %rc.0.i.i.i73, \ %pcsc_error_to_sw.exit.i.i74 ], [ 0, %if.end.i.i75 ] %tobool198 = icmp ne i32 %retval.0.i.i76, 0, !dbg !728 br i1 %tobool198, label %if.then199, label %if.end200, !dbg !728 stack: - /home/wk/s/gnupg/scd/apdu.c:1882:0 ncore: 1 core: - /home/wk/s/gnupg/scd/apdu.c:1309:0 - buffer overflow
2015-02-12scd: Fix regression in 2.1.2 (due to commit 2183683)Werner Koch1-2/+2
* scd/apdu.c (pcsc_vendor_specific_init): Replace use of bufNN_to_uint by direct code. -- Hey, that was little endian.
2015-02-11Use inline functions to convert buffer data to scalars.Werner Koch1-23/+17
* common/host2net.h (buf16_to_ulong, buf16_to_uint): New. (buf16_to_ushort, buf16_to_u16): New. (buf32_to_size_t, buf32_to_ulong, buf32_to_uint, buf32_to_u32): New. -- Commit 91b826a38880fd8a989318585eb502582636ddd8 was not enough to avoid all sign extension on shift problems. Hanno Böck found a case with an invalid read due to this problem. To fix that once and for all almost all uses of "<< 24" and "<< 8" are changed by this patch to use an inline function from host2net.h. Signed-off-by: Werner Koch <[email protected]>
2015-01-06scd: fix merge failure.NIIBE Yutaka1-2/+0
* scd/apdu.c (pcsc_pinpad_verify): Remove wrong lines inserted by merge. -- Thanks to Joshua Rogers for reviewing and reporting.
2014-07-25scd: Add a new status word code.Werner Koch1-0/+1
* scd/apdu.h (SW_REF_DATA_INV): New. * scd/apdu.c (apdu_strerror): Add string.
2014-07-22scd: Do not use the pcsc-wrapper.Werner Koch1-2/+3
* scd/apdu.c (NEED_PCSC_WRAPPER): Do not define. * scd/Makefile.am (libexec_PROGRAMS): Remove gnupg-pcsc-wrapper (gnupg_pcsc_wrapper_SOURCES): Remove. (gnupg_pcsc_wrapper_LDADD): Remove. (gnupg_pcsc_wrapper_CFLAGS): Remove.
2014-03-10scd: acquire lock in new_reader_slot.Werner Koch1-48/+70
* scd/apdu.c (new_reader_slot): Acquire lock. (open_ct_reader, open_pcsc_reader_direct, open_pcsc_reader_wrapped) (open_ccid_reader, open_rapdu_reader): Release lock. (lock_slot, trylock_slot, unlock_slot): Move more to the top. -- Fixes a test case of: No libpcsclite1 installed. Run gpg-agent Run command "gpg-connect-agent learn /bye" with no card/token Sometimes it fails: ERR 100663356 Not supported <SCD> While it should be always: ERR 100663404 Card error <SCD> (cherry picked from commit 4f557cb9c2ebe274d6aacc60a09cd919055d01ed) Resolved conflicts: scd/apdu.c: pth/npth changes. Move lock helpers to the top. Take care of removed pcsc_no_service.
2014-03-07w32: Silence warnings about unused vars.Werner Koch1-4/+5
* agent/gpg-agent.c (main) [W32]: Mark unused vars. * sm/gpgsm.c (run_protect_tool) [W32]: Ditto. * g10/trustdb.c (check_regexp) [DISABLE_REGEX]: Ditto. * scd/scdaemon.c (main) [W32]: Ditto. (handle_connections) [W32]: Ditto. (handle_signal) [W32]: Do not build the function at all. * scd/apdu.c (pcsc_send_apdu_direct): Ditto. (connect_pcsc_card): s/long/pcsc_dword_t/. (open_pcsc_reader_direct): Remove var listlen.
2013-11-18Make use of the *_NAME etc macros.Werner Koch1-1/+1
Replace hardwired strings at many places with new macros from config.h and use the new strusage macro replacement feature. * common/asshelp.c (lock_spawning) [W32]: Change the names of the spawn sentinels. * agent/command.c (cmd_import_key): Use asprintf to create the prompt.
2013-11-13scd: more pinpad input fix for PC/SC.NIIBE Yutaka1-10/+5
* scd/apdu.c (check_pcsc_pinpad): Set default values here. (pcsc_pinpad_verify, pcsc_pinpad_modify): Remove setting default values, as it's too late. -- GnuPG-bug-id: 1549
2013-11-11scd: more pinpad fix.NIIBE Yutaka1-8/+5
* scd/apdu.c (check_pcsc_pinpad): Set ->minlen and ->maxlen only when those are specified. (pcsc_pinpad_modify): Remove old check code. -- GnuPG-bug-id: 1549
2013-10-29scd: pinpad fix for PC/SC on Windows.NIIBE Yutaka1-1/+8
* scd/apdu.c (SCARD_CTL_CODE): Fix for Windows.
2013-10-25scd: fix pinpad input on Windows.NIIBE Yutaka1-1/+2
* scd/apdu.c (open_pcsc_reader_direct): Don't call pcsc_vendor_specific_init here, but... (connect_pcsc_card): Call it here. -- Thanks to Martin Wolters for the bug report.
2013-10-16scd: add pinpad readers information for PC/SC service.NIIBE Yutaka1-11/+26
* scd/apdu.c (pcsc_vendor_specific_init): Add information for Cherry ST-2xxx, Reiner cyberJack, Vasco DIGIPASS, FSIJ Gnuk Token, and KAAN Advance. --
2013-10-15scd: remove pin length check.NIIBE Yutaka1-6/+0
* scd/apdu.c (pcsc_pinpad_verify): Remove old check code for pin length. -- GnuPG-bug-id: 1549
2013-08-30scd: Use vendor and product id macros also in apdu.cWerner Koch1-2/+3
* scd/ccid-driver.c: Move vendor and product ids to ... * scd/ccid-driver.h: here. * scd/apdu.c (CCID_DRIVER_INCLUDE_USB_IDS): Define to include ids. (pcsc_vendor_specific_init): Use vendor and product id macros. Signed-off-by: Werner Koch <[email protected]>
2013-08-30scd: PC/SC pinpad input improvement.NIIBE Yutaka1-62/+168
* scd/apdu.c (struct reader_table_s): Add members: PINMIN, PINMAX, and PINPAD_VERLEN_SUPPORTED. (CM_IOCTL_VENDOR_IFD_EXCHANGE, FEATURE_GET_TLV_PROPERTIES, PCSCv2_PART10_PROPERTY_*): New. (new_reader_slot): Initialize pinpad_varlen_supported, pinmin, pinmax. (pcsc_vendor_specific_init): New. (open_pcsc_reader_direct, open_pcsc_reader_wrapped): Call pcsc_vendor_specific_init. (check_pcsc_pinpad): Not detect here but use the result of pcsc_vendor_specific_init. (pcsc_pinpad_verify, pcsc_pinpad_modify): Specify bNumberMessage. -- Signed-off-by: NIIBE Yutaka --
2013-08-21scd: Make SPRx32 pinpad work with PC/SC on Windows.Werner Koch1-7/+27
* scd/apdu.c (CM_IOCTL_GET_FEATURE_REQUEST): Use SCARD_CTL_CODE. (SCARD_CTL_CODE): Define if not defined. (reader_table_s): Add is_spr532. (new_reader_slot): Clear it. (check_pcsc_pinpad): Set it. (pcsc_pinpad_verify, pcsc_pinpad_modify): Add fix for SPR532. Signed-off-by: Werner Koch <[email protected]>
2013-08-21scd: Improve --enable-pinpad-varlen.Werner Koch1-1/+7
* tools/gpgconf-comp.c (gc_options_scdaemon): Add enable-pinpad-varlen. * scd/apdu.c (check_pcsc_pinpad): Detect SPRx32 reader. Signed-off-by: Werner Koch <[email protected]>
2013-08-01scd: Fix a syntax error for Apple and Windows.Werner Koch1-1/+1
* scd/apdu.c (pcsc_dword_t) [W32]: Fix syntax error.
2013-03-26scd: PC/SC status fix.NIIBE Yutaka1-3/+5
* scd/apdu.c (pcsc_get_status_direct): Check PCSC_STATE_MUTE only when PCSC_STATE_PRESENT. * scd/pcsc-wrapper.c (handle_status): Ditto.
2013-03-26scd: PC/SC cleanup (more).NIIBE Yutaka1-6/+6
* scd/apdu.c (control_pcsc_direct, control_pcsc_wrapped, control_pcsc) (check_pcsc_pinpad, pcsc_pinpad_verify, pcsc_pinpad_modify): Use pcsc_dword_t.
2013-03-22scd: PC/SC cleanup.NIIBE Yutaka1-57/+71
* scd/apdu.c (pcsc_dword_t): New. It was named as DWORD (double-word) when a word was 16-bit. (struct reader_table_s): Fixes for types. (struct pcsc_readerstate_s) [__APPLE__]: Enable #pragma pack(1). Throughout: Fixes for types. * scd/pcsc-wrapper.c: Likewise. -- Problem reported for 1.4.x by the issue 1358.
2013-03-21scd: change default value of pinpad maxlen.NIIBE Yutaka1-2/+2
* scd/apdu.c (pcsc_pinpad_verify, pcsc_pinpad_modify): Default value of maxlen for pinpad input is now 15 (was: 25). * scd/ccid-driver.c (ccid_transceive_secure): Likewise. -- For newer PC/SC, it is better to use FEATURE_GET_TLV_PROPERTIES to get bMaxPINSize.
2013-02-08scd: Rename 'keypad' to 'pinpad'.NIIBE Yutaka1-38/+38
* NEWS: Mention scd changes. * agent/divert-scd.c (getpin_cb): Change message. * agent/call-scd.c (inq_needpin): Change the protocol to POPUPPINPADPROMPT and DISMISSPINPADPROMPT. * scd/command.c (pin_cb): Likewise. * scd/apdu.c (struct reader_table_s): Rename member functions. (check_pcsc_pinpad, pcsc_pinpad_verify, pcsc_pinpad_modify, check_ccid_pinpad, ccid_pinpad_operation, apdu_check_pinpad apdu_pinpad_verify, apdu_pinpad_modify): Rename. * scd/apdu.h (SW_HOST_NO_PINPAD, apdu_check_pinpad) (apdu_pinpad_verify, apdu_pinpad_modify): Rename. * scd/iso7816.h (iso7816_check_pinpad): Rename. * scd/iso7816.c (map_sw): Use SW_HOST_NO_PINPAD. (iso7816_check_pinpad): Rename. (iso7816_verify_kp, iso7816_change_reference_data_kp): Follow the change. * scd/ccid-driver.h (CCID_DRIVER_ERR_NO_PINPAD): Rename. * scd/ccid-driver.c (ccid_transceive_secure): Use it. * scd/app-dinsig.c (verify_pin): Follow the change. * scd/app-nks.c (verify_pin): Follow the change. * scd/app-openpgp.c (check_pinpad_request): Rename. (parse_login_data, verify_a_chv, verify_chv3, do_change_pin): Follow the change. * scd/scdaemon.c (oDisablePinpad, oEnablePinpadVarlen): Rename. * scd/scdaemon.h (opt): Rename to disable_pinpad, enable_pinpad_varlen. * tools/gpgconf-comp.c (gc_options_scdaemon): Rename to disable-pinpad.
2013-02-05SCD: Better interoperability.NIIBE Yutaka1-2/+2
* scd/apdu.c: Fill bTeoPrologue[2] field. -- ccid-1.4.5 or older requires this field is filled by application.
2013-02-05SCD: Support fixed length PIN input for keypad (PC/SC).NIIBE Yutaka1-11/+15
* scd/apdu.c (pcsc_keypad_verify): SUpport fixed length PIN input for keypad. (pcsc_keypad_modify): Likewise. * scd/ccid-driver.c (ccid_transceive_secure): Clean up.
2013-02-05SCD: Support fixed length PIN input for keypad.NIIBE Yutaka1-4/+4
* scd/iso7816.h (struct pininfo_s): Remove MODE and add FIXEDLEN. * scd/app-dinsig.c (verify_pin): Initialize FIXEDLEN to unknown. * scd/app-nks.c (verify_pin): Likewise. * scd/app-openpgp.c (verify_a_chv, verify_chv3, do_change_pin): Likewise. * scd/apdu.c (check_pcsc_keypad): Add comment. (pcsc_keypad_verify, pcsc_keypad_modify): PC/SC driver only support readers with the feature of variable length input (yet). (apdu_check_keypad): Set FIXEDLEN. * scd/ccid-driver.c (ccid_transceive_secure): Add GEMPC_PINPAD specific settings. Support fixed length PIN input for keypad.
2013-02-05SCD: API cleanup for keypad handling.NIIBE Yutaka1-62/+37
* scd/iso7816.h (struct pininfo_s): Rename from iso7816_pininfo_s. Change meaning of MODE. (pininfo_t): Rename from iso7816_pininfo_t. * scd/sc-copykeys.c: Include "iso7816.h". * scd/scdaemon.c, scd/command.c: Likewise. * scd/ccid-driver.c: Include "scdaemon.h" and "iso7816.h". (ccid_transceive_secure): Follow the change of PININFO_T. * scd/app.c: Include "apdu.h" after "iso7816.h". * scd/iso7816.c (iso7816_check_keypad, iso7816_verify_kp) (iso7816_change_reference_data_kp): Follow the change of API. * scd/apdu.c (struct reader_table_s): Change API of CHECK_KEYPAD, KEYPAD_VERIFY, KEYPAD_MODIFY to have arg of PININFO_T. (check_pcsc_keypad, check_ccid_keypad): Likewise. (apdu_check_keypad, apdu_keypad_verify, apdu_keypad_modify): Likewise. (pcsc_keypad_verify, pcsc_keypad_modify, ct_send_apdu) (pcsc_send_apdu_direct, pcsc_send_apdu_wrapped, pcsc_send_apdu) (send_apdu_ccid, ccid_keypad_operation, my_rapdu_send_apdu, send_apdu) (send_le): Follow the change of API. * scd/apdu.h (apdu_check_keypad, apdu_keypad_verify) (apdu_keypad_modify): Change the API. * scd/app-dinsig.c, scd/app-nks.c, scd/app-openpgp.c: Follow the change.
2013-02-05SCD: Clean up. Remove PADLEN for keypad input.NIIBE Yutaka1-30/+10
* scd/apdu.c (struct pininfo_s): Use iso7816_pininfo_s. (struct reader_table_s): Remove last arg from check_keypad method. (check_pcsc_keypad, check_pcsc_keypad): Remove PIN_PADLEN. (pcsc_keypad_verify, pcsc_keypad_modify): Don't check PIN_PADLEN. (send_apdu_ccid, ccid_keypad_operation): Remove PIN_PADLEN. (apdu_check_keypad, apdu_keypad_verify, apdu_keypad_modify): Likewise. * scd/apdu.h (apdu_check_keypad, apdu_keypad_verify) (apdu_keypad_modify): Remove PIN_PADLEN. * scd/ccid-driver.c (ccid_transceive_secure): Remove PIN_PADLEN. * scd/ccid-driver.h (ccid_transceive_secure): Remove PIN_PADLEN. * scd/iso7816.c (iso7816_check_keypad, iso7816_verify_kp) (iso7816_change_reference_data_kp): Remove PADLEN. * scd/iso7816.h (struct iso7816_pininfo_s): Remove PADLEN, PADCHAR. -- In the OpenPGPcard specification, password comes with no padding. In GnuPG, we support keypad input for OpenPGPcard only. Thus, it is useless to try to support padding for keypad input.
2013-01-11SCD: Hold lock for pinpad input.NIIBE Yutaka1-3/+30
* scd/apdu.c (apdu_check_keypad, apdu_keypad_verify) (apdu_keypad_modify): Hold lock to serialize communication.
2012-12-04Revert SCD changes of 2010-05-03.NIIBE Yutaka1-19/+1
* scd/apdu.c (pcsc_no_service): Remove. (open_pcsc_reader_direct, open_pcsc_reader_wrapped): Remove pcsc_no_service support. (apdu_open_reader): Remove R_NO_SERVICE. * scd/apdu.h (apdu_open_reader): Remove R_NO_SERVICE. * scd/command.c (reader_disabled): Remove. (get_current_reader): Follow the change of R_NO_SERVICE. (open_card, cmd_serialno, scd_command_handler): Remove reader_disabled support. * scd/sc-copykeys.c (main): Follow the change of R_NO_SERVICE. -- Daemon should handle all possible cases. Even if such a difficult case like reader_disabled, it should not exit.
2012-10-31SCD: Upon error, open_pcsc_reader_wrapped does same as _direct.NIIBE Yutaka1-1/+10
* scd/apdu.c (PCSC_E_NO_SERVICE): New. (open_pcsc_reader_direct): Use PCSC_E_NO_SERVICE. (open_pcsc_reader_wrapped): Set pcsc_no_service.
2012-06-25scd: handle reader/token removal.NIIBE Yutaka1-0/+1
* scd/apdu.c (pcsc_error_to_sw): PCSC_E_UNKNOWN_READER means SW_HOST_NO_READER.
2012-06-05Change all quotes in strings and comments to the new GNU standard.Werner Koch1-4/+4
The asymmetric quotes used by GNU in the past (`...') don't render nicely on modern systems. We now use two \x27 characters ('...'). The proper solution would be to use the correct Unicode symmetric quotes here. However this has the disadvantage that the system requires Unicode support. We don't want that today. If Unicode is available a generated po file can be used to output proper quotes. A simple sed script like the one used for en@quote is sufficient to change them. The changes have been done by applying sed -i "s/\`\([^'\`]*\)'/'\1'/g" to most files and fixing obvious problems by hand. The msgid strings in the po files were fixed with a similar command.
2012-04-10Fix killing PID -1.Ben Kibbey1-6/+12
When the KILLSCD command had been sent a race condition would occur causing PID -1 getting killed, which on Linux seems to terminate all applications for the current user.
generated by cgit v1.2.3 (git 2.25.1) at 2025-06-22 14:42:24 +0000