aboutsummaryrefslogtreecommitdiffstats
path: root/doc/gpg.texi (follow)
Commit message (Collapse)AuthorAgeFilesLines
* wkd: Fix client issue with leading or trailing spaces in user-ids.Werner Koch2021-08-201-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * common/recsel.c (recsel_parse_expr): Add flag -t. * common/stringhelp.c: Remove assert.h. (strtokenize): Factor code out to do_strtokenize. (strtokenize_nt): New. (do_strtokenize): Add arg trim to support the strtokenize_nt. * common/t-stringhelp.c (test_strtokenize_nt): New test cases. * tools/wks-util.c (wks_list_key): Use strtokenize_nt and the recsel flag -t. -- This fixes a bug with user ids with leading spaces because: wks-client lists all mail addresses from the key and matches them to the requested mail address. If there are several user-ids all with the same mail address wks-client picks one of them and then extracts exactly that user id. However, here it does not match by the mail address but by the full user-id so that we can be sure that there will be only one user-id in the final key. The filter built expression unfortunately strips leading blanks but requires a verbatim match. Thus it won't find the user id again and errors out. The new -t flag and a non-trimming strtokenize solves the problem. Signed-off-by: Werner Koch <[email protected]>
* gpg,sm: Simplify keyserver spec parsing.Werner Koch2021-06-161-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | * common/keyserver.h: Remove. * sm/gpgsm.h (struct keyserver_spec): Remove. (opt): Change keyserver to a strlist_t. * sm/gpgsm.c (keyserver_list_free): Remove. (parse_keyserver_line): Remove. (main): Store keyserver in an strlist. * sm/call-dirmngr.c (prepare_dirmngr): Adjust for the strlist. Avoid an ambiguity in dirmngr by adding a prefix if needed. * g10/options.h (struct keyserver_spec): Move definition from keyserver.h to here. Remove most fields. * g10/keyserver.c (free_keyserver_spec): Adjust. (cmp_keyserver_spec): Adjust. (parse_keyserver_uri): Simplify. (keyidlist): Remove fakev3 arg which does not make any sense because we don't even support v3 keys. -- We now rely on the dirmngr to parse the keyserver specs. Thus a bad specification will not be caught immediately. However, even before that dirmngr had stricter tests. Signed-off-by: Werner Koch <[email protected]> Ported-from: 9f586700ec4ceac97fd47cd799878a8847342ffa
* gpg: Auto import keys specified with --trusted-keys.Werner Koch2021-04-251-6/+6
| | | | | * g10/getkey.c (get_pubkey_with_ldap_fallback): New. * g10/trustdb.c (verify_own_keys): Use it.
* gpg: Allow fingerprint based lookup with --locate-external-key.Werner Koch2021-04-211-7/+19
| | | | | | | | | | | | | | | | | * g10/keyserver.c (keyserver_import_fprint_ntds): New. * g10/getkey.c (get_pubkey_byname): Detect an attempt to search by fingerprint in no_local mode. -- See the man page. For testing use gpg --auto-key-locate local,wkd,keyserver --locate-external-key \ FINGERPRINT with at least one LDAP keyserver given in dirmngr.conf. On Windows "ntds" may be used instead or in addtion to "keyserver". Signed-off-by: Werner Koch <[email protected]>
* gpg,gpgsm: Move use-keyboxd to the new conf file common.confWerner Koch2021-04-191-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | * common/comopt.c, common/comopt.h: New. * common/Makefile.am: Add them. * g10/gpg.c: Include comopt.h. (main): Also parse common.conf. * sm/gpgsm.c: Include comopt.h. (main): Set a flag for the --no-logfile option. Parse common.conf. * tools/gpgconf-comp.c (known_options_gpg): Remove "use-keyboxd", add pseudo option "use_keyboxd". (known_pseudo_options_gpg): Add pseudo option "use_keyboxd". (known_options_gpgsm): Remove "use-keyboxd". * tests/openpgp/defs.scm (create-gpghome): Create common.conf. * doc/examples/common.conf: New. -- Note that --use-keybox still works but prints a warning. We will eventually remove this option becuase it was marked as an experimental feature anyway. It would be too confusing if gpg and gpgsm use different key storages. Further, other components (e.g. dirmngr or gpg-wks-client) which call gpg or gpgsm need to be aware that the keyboxd is used and pass that option on the command line. Now that common.conf is always read (even if --no-options is used) those tools will work instantly.
* gpg: Do not use self-sigs-only for LDAP keyserver imports.Werner Koch2021-04-131-1/+3
| | | | | | | | | | | | | | * dirmngr/ks-engine-ldap.c (ks_ldap_get): Print a SOURCE status. * g10/options.h (opts): New field expl_import_self_sigs_only. * g10/import.c (parse_import_options): Set it. * g10/keyserver.c (keyserver_get_chunk): Add special options for LDAP. -- I can be assumed that configured LDAP servers are somehow curated and not affected by rogue key signatures as the HKP servers are. Thus we can allow the import of key signature from LDAP keyservers by default. GnuPG-bug-id: 5387
* doc: Fix option name.Werner Koch2021-03-221-1/+1
| | | | --
* gpg: New option --no-auto-trust-new-key.Beta-2.3.0-beta1655Werner Koch2021-03-151-0/+6
| | | | | | | | | * g10/gpg.c (oNoAutoTrustNewKey): New. (opts): Add --no-auto-trust-new-key. (main): Set it. * g10/options.h (opt): Add flags.no_auto_trust_new_key. Signed-off-by: Werner Koch <[email protected]>
* doc: add documentation for gpg's keytotpm commandJames Bottomley2021-03-121-0/+20
| | | | | | | | -- The tpm2d patches introduced a new --edit-key command: keytotpm. Add a descriptive entry explaining what it does and how it works. Signed-off-by: James Bottomley <[email protected]>
* doc: Always use --edit-key and not just the --edit abbreviation.Werner Koch2021-03-111-3/+3
| | | | | | -- Reported-by: Carl Michael Skog
* gpg: New option --force-sign-keyWerner Koch2021-03-111-9/+20
| | | | | | | | | | * g10/gpg.c (oForceSignKey,opts): New option "--force-sign-key". (main): Set it. * g10/options.h (opt): New flag flags.force_sign_key. * g10/keyedit.c (sign_uids): Use new flag. -- GnuPG-bug-id: 4584
* w32: Always use Unicode for console input and output.Werner Koch2021-03-051-6/+13
| | | | | | | | | | | | | | | | | * common/init.c (_init_common_subsystems) [W32]: Set the codepage to UTF-8 for input and putput. Switch gettext to UTF-8. * tools/gpgconf.c (main): Display the input and output codepage if they differ. * g10/gpg.c (utf8_strings) [W32]: Make sure this is always set. -- With this patch the former patch to use ReadConsoleW and WriteConsoleW in ttyio.c are kind of superfluous because the ANSI version of these functions are also able to read/write UTF-8 directly given the console code page has been set correctly. However, this seems to work only with recent versions of Windows-10. GnuPG-bug-id: 4365
* dirmngr: Support new gpgNtds parameter in LDAP keyserver URLs.Werner Koch2021-02-171-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | * dirmngr/ldap-parse-uri.c (ldap_parse_uri): Support a new gpgNtds extension. * dirmngr/ks-engine-ldap.c (my_ldap_connect): Do ldap_init always with hostname - which is NULL and thus the same if not given. Fix minor error in error code handling. -- Note that "gpgNtds" is per RFC-4512 case insensitive and has not yet been officially regisetered. Thus for correctness the OID can be used: 1.3.6.1.4.1.11591.2.5 LDAP URL extensions 1.3.6.1.4.1.11591.2.5.1 gpgNtds=1 (auth. with current user) Note that the value must be 1; all other values won't enable AD authentication and are resevered for future use. This has been cherry-picked from the 2.2 branch, commit 55f46b33df08e8e0ea520ade5f73b321bc01d705 Signed-off-by: Werner Koch <[email protected]>
* gpg: Do not allow old cipher algorithms for encryption.Werner Koch2021-02-101-5/+16
| | | | | | | | | | | | | | | | | | | * g10/gpg.c: New option --allow-old-cipher-algos. (set_compliance_option): Set --rfc4880bis explictly to SHA256 and AES256. Allow old cipher algos for OpenPGP, rfc4880, and rfc2440. * g10/options.h (opt): Add flags.allow_old_cipher_algos. * g10/misc.c (print_sha1_keysig_rejected_note): Always print the note unless in --quiet mode. * g10/encrypt.c (setup_symkey): Disallow by default algos with a blocklengt < 128. (encrypt_crypt): Ditto. Fallback by default to AES instead of 3DES. * g10/pkclist.c (algo_available): Take care of old cipher also. (select_algo_from_prefs): Use AES as implicit algorithm by default. * tests/openpgp/defs.scm (create-gpghome): Set allow-old-cipher-algos. -- GnuPG-bug-id: 3415
* gpg: Remove support for PKA.Werner Koch2021-02-021-34/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * g10/gpg.c (oPrintPKARecords): Remove. (opts): Remove --print-pka-records. (main): Remove "pka-lookups","pka-trust-increase" and other PKA stuff. * g10/options.h (EXPORT_DANE_FORMAT): Remove. (VERIFY_PKA_LOOKUPS, VERIFY_PKA_TRUST_INCREASE): Remove. (KEYSERVER_HONOR_PKA_RECORD): Remove. * g10/packet.h (pka_info_t): Remove. (PKT_signature): Remove flags.pka_tried and pka_info. * g10/parse-packet.c (register_known_notation): Remove "[email protected]". * g10/pkclist.c (check_signatures_trust): Remove PKA stuff. * g10/call-dirmngr.c (gpg_dirmngr_get_pka): Remove. * g10/export.c (parse_export_options): Remove "export-pka". (do_export): Adjust for this. (write_keyblock_to_output): Ditto. (do_export_stream): Ditto. (print_pka_or_dane_records): Rename to ... (print_dane_records): this and remove two args. Remove PKA printing. * g10/free-packet.c (free_seckey_enc, cp_pka_info): Adjust for removed pka_info field. * g10/getkey.c (get_pubkey_byname): Make AKL_PKA a dummy. * g10/keyserver.c: Remove "honor-pka-record". (keyserver_import_pka): Remove. * g10/mainproc.c (get_pka_address): Remove. (pka_uri_from_sig): Remove. (check_sig_and_print): Remove code for PKA. -- PKA (Public Key Association) was a DNS based key discovery method which looked up fingerprint by mail addresses in the DNS. This goes back to the conference where DKIM was suggested to show that we already had a better method for this available with PGP/MIME. PKA was was later superseded by an experimental DANE method and is today not anymore relevant. It is anyway doubtful whether PKA was ever widely used. Signed-off-by: Werner Koch <[email protected]>
* gpg: Remove experimental feature to export w/o user-ids.Werner Koch2021-02-021-10/+0
| | | | | | | | | * g10/options.h (IMPORT_DROP_UIDS, EXPORT_DROP_UIDS): Remove. * g10/import.c (parse_import_options): Remove option import-drop-uids. (import_one_real): Remove drop uids code. (remove_all_uids): Remove function. * g10/export.c (parse_export_options): Remove option export-drop-uids. (do_export_one_keyblock): Remove drop uids code.
* gpg: New AKL method "ntds"Werner Koch2020-12-171-0/+3
| | | | | | | | | | | * dirmngr/ks-engine-ldap.c (keyspec_to_ldap_filter): Change the new support for KEYDB_SEARCH_MODE_MAIL. (ks_ldap_get): Add a debug. * g10/options.h (AKL_NTDS): New. * g10/keyserver.c (keyserver_import_ntds): New. (keyserver_get_chunk): Allow KEYDB_SEARCH_MODE_MAIL. * g10/getkey.c (parse_auto_key_locate): Support "ntds". (get_pubkey_byname): Ditto.
* doc: Add parameters for batch generation of ECC keys.Jens Meißner2020-12-011-0/+8
| | | | | | | | | | | * doc/gpg.texi: Add parameters for batch generation of ECC keys. -- There are parameters required for batch generation of ECC keys which weren't mentioned in the documentation. Signed-off-by: Jens Meißner <[email protected]>
* doc: Fix typosGavin L. Rebeiro2020-11-231-2/+2
| | | | | | | -- GnuPG-bug-id: 5071 Also fixed one in keyformat.txt [wk].
* gpg: New command --quick-revoke-sigWerner Koch2020-10-281-0/+11
| | | | | | | | | | | | | | * g10/gpg.c (enum cmd_and_opt_values): Add aQuickRevSig. (opts): Add --quick-revoke-sig. (main): Implement. * g10/keyedit.c (quick_find_keyblock): Add arg 'want_secret' and adjust all callers. (keyedit_quick_revsig): new. * g10/revoke.c (get_default_sig_revocation_reason): New. * g10/keylist.c (cmp_signodes): Make global. -- GnuPG-bug-id: 5093
* gpg: Sort the signatures in standard key listings.Werner Koch2020-10-271-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | * g10/gpg.c (parse_list_options): Add "sort-sigs". (main): Make it the default. * g10/options.h (LIST_SORT_SIGS): New. * g10/keylist.c (cmp_signodes): New. (list_keyblock_print): Sort signatures and factor signature printing code out to ... (list_signature_print): new. -- In particular together with --full-timestamps this makes it easier to see the history of key signatures and their revocations. The self-signatures are also printed first. To disable this --list-options no-sort-sigs can be used. Also don't print the annoying "no recocation reason specified" message. Signed-off-by: Werner Koch <[email protected]>
* gpg: New experimental import option "bulk-import"Werner Koch2020-09-241-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | * g10/options.h (IMPORT_BULK): New. * g10/import.c (parse_import_options): Add "bulk-import". * g10/call-keyboxd.c (in_transaction): New var. (gpg_keyboxd_deinit_session_data): Run a commit if in bulk import mode. (create_new_context): Run a begin transaction if in bulk import mode. -- Initial tests with this option are not very promising. Importing about 3000 real world keys with --use-keyboxd and full logging took: real 33m31.724s user 19m54.265s sys 2m49.662s With bulk-import this saves a mere 12%: real 29m36.542s user 19m3.391s sys 2m46.728s Signed-off-by: Werner Koch <[email protected]>
* doc: Add a remark about keyservers.Werner Koch2020-08-271-0/+5
| | | | --
* doc: Describe the relation between pubring.gpg and pubring.kbxWerner Koch2020-08-201-6/+34
| | | | | -- GnuPG-bug-id: 4958
* gpg: Fix regression for non-default --passphrase-repeat option.Werner Koch2020-08-201-1/+4
| | | | | | | | * agent/command.c (cmd_get_passphrase): Take care of --repeat with --newsymkey. -- GnuPG-bug-id: 4997
* Add --chuid to gpg, gpg-card, and gpg-connect-agent.Werner Koch2020-08-141-0/+10
| | | | | | | | | | | | | | | | | | | * g10/gpg.c (oChUid): New. (opts): Add --chuid. (main): Implement --chuid. Delay setting of homedir until the new chuid is done. * sm/gpgsm.c (main): Delay setting of homedir until the new chuid is done. * tools/gpg-card.c (oChUid): New. (opts): Add --chuid. (changeuser): New helper var. (main): Implement --chuid. * tools/gpg-connect-agent.c (oChUid): New. (opts): Add --chuid. (main): Implement --chuid. -- Signed-off-by: Werner Koch <[email protected]>
* gpg: If possible TRUST values now depend on signer's UID or --sender.Werner Koch2020-06-081-5/+26
| | | | | | | | | | | | | | * g10/mainproc.c (check_sig_and_print): Add failsafe check for PK. Pass KEYBLOCK down do check_signatures_trust. Protect existsing error ocde in case the signature expired. * g10/pkclist.c (is_in_sender_list): New. (check_signatures_trust): Add args keyblock and pk. Add new uid based checking code. * g10/test-stubs.c, g10/gpgv.c: Adjust stubs. -- GnuPG-bug-id: 4735 Signed-off-by: Werner Koch <[email protected]>
* gpg: Also allow a v5 fingerprint for --trusted-key.Werner Koch2020-03-181-1/+2
| | | | | | | | | * g10/trustdb.c (tdb_register_trusted_key): Add case for 32 octet fingerprints. -- GnuPG-bug-id: 4855 Signed-off-by: Werner Koch <[email protected]>
* gpg: Update --trusted-key to accept fingerprint as well as long key id.Daniel Kahn Gillmor2020-03-181-2/+2
| | | | | | | | | | | | | | | * g10/trustdb.c (tdb_register_trusted_key): accept fingerprint as well as long key ID. * doc/gpg.texi: document that --trusted-key can accept a fingerprint. -- GnuPG-bug-id: 4855 Signed-off-by: Daniel Kahn Gillmor <[email protected]> Fixed uses or return and kept the old string to avoid breaking translations. Signed-off-by: Werner Koch <[email protected]>
* doc: Remove duplicate description of --include-key-block.Werner Koch2020-03-141-17/+10
| | | | --
* gpg: New option --auto-key-importWerner Koch2020-03-141-4/+35
| | | | | | | | | | | | | | | | | * g10/gpg.c (opts): New options --auto-key-import, --no-auto-key-import, and --no-include-key-block. (gpgconf_list): Add them. * g10/options.h (opt): Add field flags.auto_key_import. * g10/mainproc.c (check_sig_and_print): Use flag to enable that feature. * tools/gpgconf-comp.c: Give the new options a Basic config level. -- Note that the --no variants of the options are intended for easy disabling at the command line. GnuPG-bug-id: 4856 Signed-off-by: Werner Koch <[email protected]>
* gpg: New option --include-key-block.Werner Koch2020-03-131-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * common/openpgpdefs.h (SIGSUBPKT_KEY_BLOCK): New. * g10/gpg.c (oIncludeKeyBlock): New. (opts): New option --include-key-block. (main): Implement. * g10/options.h (opt): New flag include_key_block. * g10/parse-packet.c (dump_sig_subpkt): Support SIGSUBPKT_KEY_BLOCK. (parse_one_sig_subpkt): Ditto. (can_handle_critical): Ditto. * g10/sign.c (mk_sig_subpkt_key_block): New. (write_signature_packets): Call it for data signatures. -- This patch adds support for a to be proposed OpenPGP ferature: Introduce the Key Block subpacket to align OpenPGP with CMS. This new subpacket may be used similar to the CertificateSet of CMS (RFC-5652) and thus allows to start encrypted communication after having received a signed message. In practice a stripped down version of the key should be including having only the key material and the self-signatures which are really useful and shall be used by the recipient to reply encrypted. #### Key Block (1 octet with value 0, N octets of key data) This subpacket MAY be used to convey key data along with a signature of class 0x00, 0x01, or 0x02. It MUST contain the key used to create the signature; either as the primary key or as a subkey. The key SHOULD contain a primary or subkey capable of encryption and the entire key must be a valid OpenPGP key including at least one User ID packet and the corresponding self-signatures. Implementations MUST ignore this subpacket if the first octet does not have a value of zero or if the key data does not represent a valid transferable public key. GnuPG-bug-id: 4856 Signed-off-by: Werner Koch <[email protected]>
* gpg: Add property "fpr" for use by --export-filter.Werner Koch2020-03-131-0/+4
| | | | | | | | | | | | | | | | * g10/export.c (push_export_filters): New. (pop_export_filters): New. (export_pubkey_buffer): Add args prefix and prefixlen. Adjust callers. * g10/import.c (impex_filter_getval): Add property "fpr". * g10/main.h (struct impex_filter_parm_s): Add field hexfpr. -- The push and pop feature will help us to use the export filter internally in gpg. Same for the export_pubkey_buffer change. GnuPG-bug-id: 4856 Signed-off-by: Werner Koch <[email protected]>
* Spelling cleanup.Daniel Kahn Gillmor2020-02-181-2/+2
| | | | | | | | | | | | | | | | No functional changes, just fixing minor spelling issues. --- Most of these were identified from the command line by running: codespell \ --ignore-words-list fpr,stati,keyserver,keyservers,asign,cas,iff,ifset \ --skip '*.po,ChangeLog*,help.*.txt,*.jpg,*.eps,*.pdf,*.png,*.gpg,*.asc' \ doc g13 g10 kbx agent artwork scd tests tools am common dirmngr sm \ NEWS README README.maint TODO Signed-off-by: Daniel Kahn Gillmor <[email protected]>
* gpg: New option --full-timestrings.Werner Koch2020-02-131-0/+8
| | | | | | | | | | | | | | | | | | | | | * g10/options.h (opt): Add flags.full_timestrings. * g10/gpg.c (oFullTimestrings): New. (opts): New option. (main): Set new flag. * g10/keyid.c (dateonlystr_from_pk): New. (dateonlystr_from_sig): New. (datestr_from_pk): Divert to isotimestamp if requested. (datestr_from_sig): Ditto. (expirestr_from_pk): Ditto. (expirestr_from_sig): Ditto. (revokestr_from_pk): Ditto. * g10/import.c (impex_filter_getval): Use dateonlystr_from_sig and dateonlystr_from_pk. -- Quite helpful for debugging keys. Signed-off-by: Werner Koch <[email protected]>
* doc: Improve the warning section of the gpg man page.Werner Koch2020-02-101-10/+16
| | | | | | * doc/gpg.texi: Update return valeu and warning sections. Signed-off-by: Werner Koch <[email protected]>
* gpg: Fix a potential loss of key sigs during import with self-sigs-only.Werner Koch2019-11-071-6/+8
| | | | | | | | | | | * g10/import.c (import_one_real): Don't do the final clean in the merge case. -- This fixes a regression introduced with self-sigs-only. GnuPG-bug-id: 4628 Signed-off-by: Werner Koch <[email protected]>
* gpg: Add option --allow-weak-key-signatures.Werner Koch2019-11-071-5/+14
| | | | | | | | | | | | * g10/gpg.c (oAllowWeakKeySignatures): New. (opts): Add --allow-weak-key-signatures. (main): Set it. * g10/options.h (struct opt): Add flags.allow_weak_key_signatures. * g10/misc.c (print_sha1_keysig_rejected_note): New. * g10/sig-check.c (check_signature_over_key_or_uid): Print note and act on new option. Signed-off-by: Werner Koch <[email protected]>
* doc: Make clear that by default RFC-4880bis features are used.Werner Koch2019-11-071-12/+8
| | | | --
* doc: Document the --unwrap command.Werner Koch2019-11-061-0/+9
| | | | | | -- Signed-off-by: Werner Koch <[email protected]>
* doc: Fix documentation about --locate-keys.NIIBE Yutaka2019-10-161-7/+7
| | | | | | | | | * doc/gpg.texi (--locate-keys): Remove mentioning signing keys. -- GnuPG-bug-id: 4713 Signed-off-by: NIIBE Yutaka <[email protected]>
* doc: Fix c+p bug in the examples for --import-filter.Werner Koch2019-10-121-5/+5
| | | | | | | -- Reported-by: Steve McIntyre Signed-off-by: Werner Koch <[email protected]>
* doc: Update description of --debugWerner Koch2019-09-051-2/+3
| | | | | | -- Signed-off-by: Werner Koch <[email protected]>
* doc: Fix grammar error.Werner Koch2019-08-301-1/+1
| | | | | -- GnuPG-bug-id: 4691
* gpg: Extend --quick-gen-key for creating keys from a card.Werner Koch2019-08-221-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | * g10/keygen.c (parse_key_parameter_part): Add arg R_KEYGRIP and support the special algo "card". (parse_key_parameter_string): Add args R_KEYGRIP and R_SUBKEYGRIP. Handle the "card" algo. Adjust callers. (parse_algo_usage_expire): Add arg R_KEYGRIP. (quickgen_set_para): Add arg KEYGRIP and put it into the parameter list. (quick_generate_keypair): Handle algo "card". (generate_keypair): Also handle the keygrips as returned by parse_key_parameter_string. (ask_algo): Support ed25519 from a card. -- Note that this allows to create a new OpenPGP key from an initialized OpenPGP card or from any other supported cards. It has been tested with the TCOS Netkey card. Right now a stub file for the cards might be needed; this can be achieved by running "gpgsm --learn" with the card plugged in. Example: gpg --quick-gen-key [email protected] card Signed-off-by: Werner Koch <[email protected]>
* gpg: New option --use-only-openpgp-cardWerner Koch2019-08-211-0/+7
| | | | | | | | | | | | | | | | * g10/gpg.c (opts): Add option. (main): Set flag. * g10/options.h: Add flags.use_only_openpgp_card. * g10/call-agent.c (start_agent): Implement option. -- With the previous patch we switch to autoselect an application instead of requesting an openpgp card. This option allows to revert this in case of use use cases which expected the former behaviour. Signed-off-by: Werner Koch <[email protected]> (cherry picked from commit c185f6dfbd1bfd809369da789239a371e9d1610e) This was first added to the 2.2 branch.
* doc: fix minor spelling and tense errorsDaniel Kahn Gillmor2019-08-201-2/+2
| | | | | | * doc/{gpg,gpgsm,wks}.texi: minor orthographic cleanup. Signed-off-by: Daniel Kahn Gillmor <[email protected]>
* gpg: With --auto-key-retrieve prefer WKD over keyservers.Werner Koch2019-07-051-4/+20
| | | | | | | | | | | | | | * g10/mainproc.c (check_sig_and_print): Print a hint on how to make use of the preferred keyserver. Remove keyserver lookup just by the keyid. Try a WKD lookup before a keyserver lookup. -- The use of the the keyid for lookups does not make much sense anymore since for quite some time we do have the fingerprint as part of the signature. GnuPG-bug-id: 4595 Signed-off-by: Werner Koch <[email protected]>
* gpg: Add "self-sigs-only" and "import-clean" to the keyserver options.Werner Koch2019-07-041-0/+5
| | | | | | | | | | | | | | | | | | | * g10/gpg.c (main): Change default. -- Due to the DoS attack on the keyeservers we do not anymore default to import key signatures. That makes the keyserver unsuable for getting keys for the WoT but it still allows to retriev keys - even if that takes long to download the large keyblocks. To revert to the old behavior add keyserver-optiions no-self-sigs-only,no-import-clean to gpg.conf. GnuPG-bug-id: 4607 Signed-off-by: Werner Koch <[email protected]>
* gpg: New command --locate-external-key.Werner Koch2019-07-041-4/+9
| | | | | | | | | | | | | | | | | | | | | | | * g10/gpg.c (aLocateExtKeys): New. (opts): Add --locate-external-keys. (main): Implement that. * g10/getkey.c (get_pubkey_byname): Implement GET_PUBKEY_NO_LOCAL. (get_best_pubkey_byname): Add arg 'mode' and pass on to get_pubkey_byname. Change callers. * g10/keylist.c (public_key_list): Add arg 'no_local'. (locate_one): Ditto. Pass on to get_best_pubkey_byname. -- This new command is a shortcut for --auto-key-locate nodefault,clear,wkd,... --locate-key and uses the default or configured AKL list but does so without local. See also GnuPG-bug-id: 4599 Signed-off-by: Werner Koch <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2025-06-24 09:07:26 +0000